Offers to Sell

This cartridge heater filling machine is to fill MGO powder directly.Before to fill MGO powder, it need to cover the bottom of the tube first, then hand the resistance coil on the machine, and fill MGO powder directly. Information need for order for Cartridge heater filling machine: *** length to fill; *** diameter to fill (diameter should be larger than Φ9.5mm); *** wall-thicnkess of the tube to fill; *** max OD of resistance wire spiral and how many resistance coil; *** size of terminal pin; *** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)

Minimum Order: 1 bags

Mora Calibration serve customers from a variety of industries, including Aerospace, automotive, electronics, industry, Wind Energy, Solar Energy, Oil and Gas Pipeline, Power Transmission, Utilities, Natural Gas. We offer a comprehensive line of quality industrial components and are well known for our broad range of Calibration Instruments, Dimensional Measuring Tools, Electrical Test Instruments, Environmental Testing, Process Instruments, Recorders/Data Loggers, Temperature Measurement, Power Quality, Torque, Preventative/Maintenance contact us www.moracalibration.com

Minimum Order: 1 bags

Cartridge heater shrining machine use to shrink cartrige heaters to small diameters, to increase density. There are two kinds of shrining machine for cartridge heaters: swaging machine and roller reducing machine. Swaging machine suitable for many different diameters and in small quantity. Roller reducing machine suitable for single diameter in bulk quantity. Depend on the length of cartridge heaters, there are common rolling reducing machine and short cartrige heater reducing machine. We improved the GT-SW30 swaging machine in new design as below. Which is easier for maintain in future.

Minimum Order: 1 bags

Mora Calibration serve customers from a variety of industries, including Aerospace, automotive, electronics, industry, Wind Energy, Solar Energy, Oil and Gas Pipeline, Power Transmission, Utilities, Natural Gas. We offer a comprehensive line of quality industrial components and are well known for our broad range of Calibration Instruments, Dimensional Measuring Tools, Electrical Test Instruments, Environmental Testing, Process Instruments, Recorders/Data Loggers, Temperature Measurement, Power Quality, Torque, Preventative/Maintenance contact us www.moracalibration.com

Minimum Order: 1 bags

GT-CT15(30) tube cutting machines are semi auto tube cutting machine is designed to meet the requirements of many sizes and small quantity of pipes cutting (such as cartridge heaters). The machine suitable for copper pipes, iron pipes, stainless steel pipes, aluminum pipes, etc. We improved the machine with touch screen in 2023, more easy to debug the machine and use.

Minimum Order: 1 bags

Pressure generated by built-in pump and controlled automatically from 90% vacuum to max pressure Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar) 0.02%FS Fully temperature compensated 0.005%FS Fully Automated pressure calibration Task preset and auto run Auto step User friendly interface Intuitive icon driven menu structure Measure mA or V with 0.01% RD 0.005%FS accuracy Source 0 to 22mA current 24 VDC loop power supply to pressure transmitter during test Automatic switch test Up to 30V misuse protection on any two sockets 7 LCD color screen (800X480) Task management capability Internal memory stores 120 tasks Download tasks and upload results Support HART instrumentation Rechargeable battery with up to 8 hours operation between charges contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Air operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008 %) Gas operated with optional hand pumps Dual vacuum/pressure models available Psi, bar, kgf/cm2, kPa and MPa ranges available Piston/cylinder design provides stability and repeatability Built-in pneumatic hand pumps for pressure and vacuum High quality needle valves provide optimum control Mounted spirit level and adjustable feet Test station design with O-rings eliminates the need for PTFE tape or wrenches Improved case with springloaded latches for hood Sturdy weight box with hinged lid and side handles for easy transport contact us www.moracalibration.com

Minimum Order: 1 bags

DBF temperature-controlled electric hot plate, also known as anti-corrosion electric hot plate, has a Teflon-coated non-stick surface and is not affected by strong acids and alkalis. It is an electric hot plate used for sample heating, digestion, evaporation, boiling and acid removal experiments. It can be used with our Teflon series such as beakers, crucibles, digestion tubes, sample dissolving tanks, digestion tank inner cups, etc., and the effect is good. It can meet the reagent heating needs of chemical laboratories in different industries such as physics, chemistry, biology, environmental protection, pharmaceuticals, food, beverages, teaching, and scientific research. Technical parameters of anti-corrosion electric heating plate Model: DBF type Operating area (mm): 600 * 400mm, 400 * 300mm, 500 * 250mm, 450 * 350mm, etc Heating method: Electric heating PID digital display Working temperature: 220 ℃ Temperature control accuracy: ± 1 ℃ Surface anti-corrosion of heating plate: PFA coating Heating plate material: exquisite aluminum alloy/graphite Rated voltage: 220V (adjustable according to region) Continuous working time:>48 hours Supporting products: Crucible/beaker/PFA vials characteristic: 1. PFA Teflon coating, anti-corrosion cast aluminum heating plate heats up quickly; 2. The board and the control box can be made into two parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life and processing multiple samples at the same time without cross-contamination; 3. Customizable time setting function and segmented temperature control; 4. The exposed part of the power cord is wrapped with PFA tubes to further prevent acid gas from corroding components; web: https://www.njbinglab.com

Minimum Order: 3 bushels

The teflon series reaction bottle contains a PTFE filter ball and a threaded sealing design at the bottle mouth to ensure the sealing of the reaction vessel. Connect other reaction vessels through PFA conduits to form a hydrogen fluoride reaction device, and the PFA valve can control the flow of liquid or gas. #reactionvessel #reactor #teflonlabware #teflonvalve