Offers to Sell

Push Push Latch RD-08 Component Parts Less honorary seat: POM Lock cylinder: POM Deadbolt: POM Spring: stain , less steel Steel needle: stainless steel Technical Requirements 1. Storage Temperature: -40°C to 90°C, Operating Temperature: -35°C to +80°C. 2. At room temperature, the door lock operation pressing force should be 6N ±1. Insertion force into the opponent's mounting hole: ≤20N. Extraction force: ≥50N (subject to customer hole design). In the locked state, the clamping force applied to the opponent's component should be ≥20N. 3. Durability Requirements: (1) At room temperature, with the product initially in the locked position, wait for 0.5 seconds, then unlock. After unlocking, wait for 0.5 seconds. This constitutes one cycle of operation. The product should undergo more than 50,000 cycles of continuous testing without any functional failure. (2) At room temperature, under a continuous 6N load, follow the same steps as in (1) above, and the product should undergo more than 30,000 cycles of continuous testing without any functional failure.

Axial/Barre Damper RD-T138 Characteristics SOC Free, Screw, two-way, No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM O-RING: VMQ Oil:

Gear/Rotary Damper RD-T068/V068 Characteristics SOC Free, Screw, two-way, One-way,No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM Gear: POM O-RING: ,  VMQ Oil: silicone oil Durability Ambient temperature: normal temperature 23° Conditions: One rotation (1 turn) / 1s - pause / 1s - Reverse rotation (1 turn) / 1s - pause / 1s Lifetime: 30,000 times Technical Specifications Type 12 / / / Number of teeth 12 / / / Tooth width Product height 19 Module 1.05 / / / Pitch circle diameter Φ14.7 Pressure angle 20° / / / Material POM / / /

GTPG- (1-8) group buffing machine, mainly to meet the different requirements of surface finish of the heaters by heater factories. There are 1 - 8 groups buffing machines to choose. Polishing wheel is driven by motor high-speed rotation. The pressure wheel is driven by another motor through the reducer. The diameter can be adjusted conveniently, and the axis inclination of polishing wheel can meet the needs of different tube diameter.

Function: The machine combine with different functions on one machine. For example, machine combine pull plug + cut pin, machine combine trim+cut pin, machine combine cut pin+ pin chamfering, machine combine stretching+cut pin; To make sure machine maintain easy and with high efficiency, recommend machine with 2 functions on the machine. Main features: *** Max length of heater: 1000mm or according to order; *** Diameter to process: according to order; *** Function of the machine: 2 function according to order, such as pull plug+cut pin, trim+cut pin, cut pin+pin chamfering. *** Auto feed material, auto work, auto unload. Application: Tubular heater production; Information need for order GT-MF01 Pull Plug + Cut Pin Machine : *** Diameter of heater, such as 8mm; *** Max length of heater, such as 1000mm (Recommend heater within 2000mm) *** Function need, such as plug + cut pin; *** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Minimum Order: 1 bags

GT-LS202 Semi Auto Stretching Machine use to stretch long tubular heaters after shink, to let all heaters in same length. Function: Stretching heater after shrink, to make all heaters in target length. Main features: 1. auto or manual load heater, auto stretch, auto or manual unload finished heater; 2. with touch screen, easy debug the machine; Application: Tubular heater production Information need for order GT-LS202 Semi Auto Stretching Machine（for long heaters）: ** Diameter of heater; ** Length of heater, If for long heater, recommend load and unload heater by manual; ** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Function: Shrink small hot runner heater, such as small round heater, small square heater, small flat heater. Main features: *** high efficient； *** Heater shrink with round edge, if need sharp edge, need to match with swaging machine ; *** with touch screen, easy debug the machine; *** machine in nice design small size. Application: Suitable for hot runner heater reducing, such as 2.2*4.2mm heaters; Information need for order GT-JYH12 Hot Runner CNC Shrinking Machine: Tube diameter before and after reduce, such as2.2*4.2mm Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Minimum Order: 1 bags

Function: Reduce heater to increase density; Main features: 1. whole casting for body of the machine, ensure stable use in future.; 2. According to different diameters and orders, can make in uniform speed or un- uniform speed; 3. change related rollers can reduce different diameters heaters; 4. When the heater is blocked, the machine will automatic shutdown; 5. with small size, less noise, easy adjustment; 6. suitable for different materiall metal tubes; 7. change rollers, can reduce round, square, flat heaters. 8. can make in 12 station, 16 station, 18 station and 21 station. Application: Round heater reduce, such as tubular heater, cartridge heater, cable heater; Oblate heater reduce, such as railway heater reduce, fryer heater; Information need for order GT-JY16 roll reducing machine: Tube diameter before and after reduce, such as Φ10-8.5mm Length before reduce； Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)； speed: uniform speed or un-uniform speed;

Minimum Order: 1 bags

Straighten the coil tube auto, and auto cut the tube according to the length need. Machine suitable for coil copper tube, aluminum tube to straight and cut. Application: Copper coil tube straight and cut, such as copper water heater produciton. Main Data: 1. Suitable OD of tube: Φ4-Φ19mm; 2. Wall-thickness: 0.2-2.0mm; 3. Feeding speed: 0-60mm/min; 4. Cutting method: rotary cutting; 5. Min length to cut: 25mm; 6. Power supply: 3phase 380V, 50HZ or according to order; 7. Air supply: 0.4-0.8Mpa clean compressed air; Information need for order GT-ASCT19 auto coil tube straightening and cutting machine: Tube diameter to cut Length to cut Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)

Minimum Order: 1 bags

★Description Auto tube cutting machine use to cut tubes for heating elements autocratically.Mainly for heater production in large production. Suitable for copper pipes, iron pipes, stainless steel pipes, aluminum pipes, etc. ★Main details 1.Auto feeding, cutting, pipe breaking, and auto unload tubes. 2.Can cut two different length. 3.Only need to manual put the tubes on the rack, and take the finished cut tubes. One person can take care of several machines. 4.Quality pneumatic rotary chuck, to clamp the tube more stable. 5.With touch screen, easy operation. 6.Actions are controlled by time, easy to operate and less failure. 7.Tubes with few burrs after cutting.

Minimum Order: 1 bags

Advantages: 1.High Thermal Efficiency: The graphite digestion instrument utilizes graphite as its heating element, which offers excellent thermal conductivity and even heat distribution. This ensures rapid and uniform heating of samples, improving digestion efficiency. 2.Excellent Temperature Control: The instrument is equipped with precise temperature control systems that allow for accurate temperature adjustments and stable operation. This ensures that samples are digested at optimal temperatures, minimizing the risk of over- or under-digestion. 3.Versatility: The graphite digestion instrument is designed to handle a wide range of sample types and volumes. It can be used for digesting solid, liquid samples, making it a versatile tool for various analytical applications. 4.Ease of Operation: The instrument's user-friendly interface and intuitive controls simplify the operation process. Users can easily set parameters, monitor digestion progress, and retrieve results, all with minimal training. 5.Durability and Longevity: The use of high-quality materials and components in the construction of the graphite digestion instrument ensures its durability and longevity. It can withstand frequent use and rigorous laboratory conditions, providing reliable performance over extended periods. 6.Environmentally Friendly: The graphite digestion instrument contributes to a greener laboratory environment by reducing the use of hazardous chemicals and reagents. It also helps minimize waste generation and energy consumption. web: https://www.njbinglab.com

Minimum Order: 3 bushels

PFA material has excellent physical and chemical properties, and can withstand highly corrosive media such as oxidants, acids, alkalis, hydrofluoric acid, chlorine gas, and solvents, maintaining the long-term stable operation of valves, spring tubes, etc. Accept various customized welding requirements for PFA pipes. #laboratoryvalve #semiconductor #catheter #teflon

1. Wet digestion treatment plan for lithium batteries: determination of nickel cobalt lithium material (determination of nickel, cobalt, and manganese content in nickel cobalt manganese oxide lithium material for lithium-ion batteries) 2. Determination of matrix metal impurities in electronic grade polycrystalline silicon: iron, chromium, nickel, copper, zinc, sodium. Wet digestion treatment scheme for lithium batteries - determination of iron content A combination of graphite digestion instrument or aluminum alloy anti- corrosion electric heating plate+PFA or PTFE beaker can be used for digestion After digestion, transfer to a PFA or FEP volumetric flask for constant volume, dilute with water, and finally use analytical instruments such as ICP-MS to measure elemental data

The Telfon Buchner funnel can replace the ceramic Buchner funnel to avoid fragmentation. The Buchner funnel made of polytetrafluoroethylene material has strong corrosion resistance and can be filtered using vacuum or negative pressure suction. It can also be matched with a filter bottle and used for vacuum filtration of crystals or coarse particle precipitation in inorganic preparation. It can prevent the splashing of corrosive solvents. Application: 1. Matched with suction bottles, used for vacuum filtration of crystals or coarse particle precipitation in inorganic preparation; 2. When the precipitation is low, use a small funnel in conjunction with a filter tube.