Offers to Sell

Xiongcai E3 Motor Speed Controller Integrates High-performance and Safety To Promote Handling Experience of RC Car When you drive your RC cars, what comes to mind must be power, speed or something else rather than protective measures. Maybe the RC car manufacturers might think about this, but we care about it. We have been engaging in motor speed controller since 2011, what we focused on is driving motor more efficiently, more reliably and more safely. When we engineered E3-a powerful motor speed controller, we kept this thought in mind. E3 motor speed controller was engineered according to a client’s concept. This client is one of the largest RC hobby products suppliers, running RC cars, boats, planes etc. they wanted to design a powerful BLDC brushless motor speed controller for 1:6th scale vehicle. The client said according to their experience, many enthusiasts would have a problem that the high power would damage motor or motor speed controller. We needed to balance high performance and safe. This was exactly what we were good at. Engineered from the ground up, a potent integration of hardware and unique software that will redefine handling experience of RC cars. With power system 400A continuous current, 800A peak, 6-12S Li-po batteries, the ESC will put your RC car in its extreme. A built-in DCDC conversion circuit provides potent loading capacity for BEC with options 6.0V, 7.4V, 8.4V and output 10A continuous current, 25A peak. You can choose proper power according to your servo performance. The Al forged case integrates a 40mm fin and heatsink allows airflow throughout the package, promoting thermal performance to a new level. Fan will be turned on or off by motor speed controller according to internal temperature of system. We have designed perfect protection measures while endowing E3 motor speed controller with high performance, including under voltage, throttle loss, abnormal braking, over temperature, abnormal Hall sensing, short circuit and more, especially the active freewheeling and wave-by wave current limiting. The unique application of active freewheeling identification technology provides microsecond track and response time, minimizing MOS heating. Wave-by wave current limiting will protect motor and transmission mechanism, prolonging service life of power system. Xiongcai E3 motor speed controller is an efficient system designed for enthusiasts’ RC cars, putting them in extreme and running at their best.

Minimum Order: 300

300A 14S Motor Speed Controller for Water Sports Surfboard RC Boats In the last years, XC technology has released 6 electronic speed controllers (ESC, motor controller) for RC cars and RC trucks and earned a place in this field. This year, we release a new product-motor controller for water sports, such as surfboard, thruster or sea scooter and RC boats, letting you enjoy the fun of surfing even in calm lakes. 1. Current: Continuous current 300A 2. Output: 6-14s Li-Po 3. Motor: BLDC Sensored or sensorless brushless motor 4. Speed: <240,000RPM 5. BEC: 6.0V, 7.4V, 8.4V, continuous current 10A, peak 25A 6. Bluetooth Communication: Parameter setting, firmware upgrade 7. Mobile App: for quick programming, no need of additional modules 8. Compatible with any RC motors 9. Dimension: 127.5*81.0*52.5mm For water sports, the power of motor controller could be higher than that on surface. Especially for surfboard, XC technology designs a power system of 300A current, 6-14S to evoke your passion. It will redefine the limit of water sports. With advancement work of hardware and software, W300 motor controller can increases performance dramatically and reduce heat. The CNC machined Al alloy case integrates water cooling system will make thermal dissipation effectively. The optimal software will reduce the time components spend generating heat, remaining motor controller cool while running at top performance. W300 motor controller takes thermal performance to a new level. Unique technologies have been applied for safety and reliability. The active freewheeling can achieve microsecond level on track and response to reduce MOS generating heat. Wave-by-wave current limiting will control the peak current (peak current doesn’t do any good), protect motor and drivetrain, prolonging service life of power system. Mobile App can be used to program parameters, update firmware and observe motor controller data (records and real-time data). No need of additional programming box or card. Built-in Bluetooth connects to Mobile App directly for parameter setting, firmware updates. No need of additional Bluetooth module. 10A cont. current, 6.4v-7.4-8v adjustable BEC suits different servos and provides quick response to servo signal (the greater the current, the faster the response). Besides high-performance, a full protection is designed to protect you and your beloved devices, including low voltage, throttle loss, abnormal braking, over temperature etc. We try our best to improve reliability of motor controller because we care about the safety of users and their device like we care about that of ourselves. Current detection liming in single PWM cycle. It can reduce impact of pulse current on motor. W300 motor controller can process current control 20,000 time per second, keeping response in time as well as no need to be shut down. Turbo timing can unleash potential power of motor. actually, most of motor controllers have this function, but the problem is these motor controllers need to pair with specific motors. XC technology makes a change. W300 motor controller can perform turbo timing on any motor, let you feel fast and furious. Furthermore, XC W300 has the function of data return. Users can view the real- time data of motor controller such as voltage, current, temperature and motor RPM etc. Typically, additional module and wire are required to achieve this function, which is fussy and costly. We are always trying to make motor controller reliable, cost-effective and easy-to-use, and we have made it. Contact us for detail and have a try, you will feel something different.

Minimum Order: 100

XC700 DC 96V Motor Controller for Solar Pumping System XC700 motor controller is mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it’s one of the best sellers in XC motor control product family. Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it. This motor controller for solar pump comes with characteristics: Specification: Model: XC700-SP-96V-1300w Working Voltage: DC24-150V Rated Voltage: 96V Rated Current: 13.5A Working Temp: -30-85℃ Humidity: 95% Max Dimension: 115*96*39mm (PCBA), 144*170*61mm (set) Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection Start/stop and speed control Suitable for applications powered by solar panels, MPPT algorithm inside XC Motor Control has been specializing in motor control since2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best. Have a try, you are worth a better solution.

XC701 DC36V Motor Controller for Fountain Pumping System Let water dance to music. XC Motor Control Technology is one of the earlier companies developing motor controller for fountain pump controller. XC701 motor controller is engineered for (music) fountain pumping system and has been widely used in China for landscape. Excellence in performance and reliability had been recognized and approved by clients and market. After several iterations, XC701 motor controller can adapt to various application circumstance. it’s one of the best sellers in portfolio of XC motor controllers. Technical requirements on fountain pump controller could be diverse and particular, backed by sophisticated RD team, we are able to provide bespoke service for customers. If you have any specific requirement, we help you achieve it. This BLDC motor controller for fountain pumping system comes with characteristics: Specification: Model: XC701 Working Voltage: DC13.5-30.5V Rated Current: 31.5A Working Temp: -45-85℃ Humidity: 95% Max Dimension: 71*68*26mm Protection: Undervoltage protection, over voltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection Protocol: DMX512 protocol XC Motor Control Technology pioneers advanced solutions in BLDC motor control system. With considerable expertise, we have been serving top clients such as FAW group, Dongfeng NISSAN, XPeng Aero car, Cummins and more. The potent combination of hardware and advanced software can keep your device working at optimal. Have a try, you are worth a better solution.

Minimum Order: 500

XC Speed Controller Provides Not Only Performance, But Also Protection RC cars and trucks are crucial assets to RC hobby enthusiasts, we should provide full protection when they are powering their beloved RC cars or trucks through our speed controller (ESC). We can see that there are lots of speed controller manufacturers always shown the power, current or number of battery cells. Actually, most of manufacturers can make speed controllers with high power, high voltage and heavy current. Are these characteristics the most important? No doubt, these attributes are important, but many electronic speed controller suppliers and manufacturers neglected a fundamental element-safety. Maybe most of RC enthusiasts had experienced great loss due to power beyond control. E8 electronic speed controller characteristics: 1. Current: Continuous current 160A, peak 320A 2. Cells: 3-6s Li-Po batteries 3. Motor: BLDC Sensored or sensorless brushless motor, 240,000RPM 4. BEC: 6.0V, 7.4V, 8.4V, continuous current 6A, peak 15A 5. Bluetooth: Parameter programming, firmware upgrade 6. Mobile App: for quick programming, no need of additional modules 7. Acceleration: 12 levels of acceleration, quick start like super car 8. Dimension: 59.8*48.2*35.9mm 9. Compatible with most of motors for RC hobbies It’s essential to reducing damage possibility of RC model and ensure safety of players through full protection, for beginners or senior enthusiasts. That’s a thought deeply rooted in the mind of XC’s team. XC Technology XC202-E8 electronic speed controller, for instance, is a powerful ESC designed for 1:8 scale RC cars or trucks. This ESC can handle 6S LiPo batteries, with up to 160A continuous current, it allows you to do any stunts like launch control, side standing, somersault or whatever. With 12 levels of acceleration and 10 level PWM initial speed, XC202-E8 can let your RC cars or trucks run on rear wheels, run by rear wheels, even show back flip. Built-in 8.4V BEC adapts to high voltage servo, with 10A continuous current, achieving real-time response to servo. These attributes can push your RC car to limits, is that all? No, what we need more is safety, for both RC cars or trucks and personal safety. Anti-spark design. It will reduce spark when connecting plugs of batteries and ESCs, improving service life of plugs and protecting batteries and ESCs. IP67 rating. Potting with epoxy for waterproof and dustproof allow you to drive RC cars or trucks at any weather conditions and terrains. Smart thermal dissipation. The 40mm fan is controlled intelligently by ESC. When temperature is above 55 Celsius degrees, fan will be turned on. When temperature drops to 50 Celsius degrees, fan will be turned off. Comparing to other electronic speed controllers (ESCs), the fan starts running when ESC is on. XC ESC reduces energy consumption for longer runtime. Active freewheeling. The precision active freewheeling can reduce MOS generating heat and avoid excessive current pulse. Current limiting in each single PWM cycle. This is a very important protection technique, which can protect power switch elements and motor when there is a sudden heavy current or has a short-circuited output. It can a) reduce impact of pulse current on motor; b) reduce impact on switch MOS; c) ESC will detect and control current 20,000 times per second in each PWM cycle, no need to shut down ESC. Traditionally, when over current occurs, it will be controlled after 10 times process, the power will be decreased or ESC shut down. Comparing to this mode, XC electronic speed controller provides better user experience. XC E-series speed controllers (ESCs) have been used in RC cars and trucks modification, like Losi 5T converting from gas to electric. XC electronic speed controllers (ESCs) will redefine the R/C limits and is able to put your RC cars or trucks in extreme.

Minimum Order: 30

Dear Partner/Associate, We are accredited mandate to a renowned provider for bank instruments; BGs SBLCs LCs DLCs ET AL for lease and sale, Issuance by HSBC Bank Oman, Barclays Bank London , Deutsche Bank, BNP Paribas, & AAA Rated Banks in Europe, Middle East or USA. Our BG/SBLC Financing can help you get your project funded, LOAN financing by providing you with yearly renewable leased bank instruments. We work directly with issuing bank lease providers. Call us today at Skype ID: chayan.lease@gmail.com Email : chayan.lease@gmail.com Whatsapp : +15072026523 Address 47, Heathmere Drive, Birmingham B37 5EH, England, United Kingdom We are the Best in the world a trial will convince you.

Do you need Finance? Are you looking for Finance? Are you looking for finance to enlarge your business? We help individuals and companies to obtain finance for business expanding and to setup a new business ranging any amount. Get finance at affordable interest rate of 3%, Do you need this finance for business and to clear your bills? Then send us an email now for more information contact us now via (financialserviceoffer876@gmail.com) whats-App +918929509036 Dr James Eric Finance Pvt Ltd Thanks

Do you need Finance? Are you looking for Finance? Are you looking for finance to enlarge your business? We help individuals and companies to obtain finance for business expanding and to setup a new business ranging any amount. Get finance at affordable interest rate of 3%, Do you need this finance for business and to clear your bills? Then send us an email now for more information contact us now via (financialserviceoffer876@gmail.com) whats-App +918929509036 Dr James Eric Finance Pvt Ltd Thanks

Minimum Order: 800000

Product Name:1-(benzo[dl[1.3]dioxol-5-y)-2-bromopropan-1-o , ne Cas NO.:52190-28-0 Purity: 99% Usage:Pharmaceutical intermediate Molecular Formula: C10H9BrO3 Flash Point :162.857 Boiling Point :345.673°C at 760 mmHg Aliase:Bromo-3'4'- (methylenedioxy) Appearance:Brown Powder

Product Name：New Pmk Powder/Oil Pmk Ethyl Glycidate CAS：28578-16-7 Molecular formula Pmk: C13H14O5 Purity：97%-99% or Custom Appearance：White Powder Or Yellow Liquid

Butyne glycol ether Product CAS No. Chemical Composition BEO 1606-85-5 Butynediol Ethoxylate BMP 1606-79-7 Butynediol Propoxylate B-100 1606-85-5 Butynediol Ethoxylate B-200 1606-85-5 Butynediol Ethoxylate Product characteristics The structure is specially designed for the hydrosilylation of acetylenic alcohols. The product has high purity and is easy for industrial reactions. Applications It is suitable for the synthesis and preparation of acetylenic alcohol-modified polysiloxane surfactant, which can be used as super wetting agent, defoaming agent and foam suppressor. Packing 200Kg/barrel, stored in cool and dry place Karen Yuan Sales Department Wuhan Bolachem New Material Co., LTD info@bolachem.com​ Whatsapp/Wechat: 008618086413361 Skype: live:chuntian_334455

Minimum Order: 1 bags

Metal corrosion inhibitor PT-PP, PP-PM Product CAS No. Chemical Composition PT-PP 3973-17-9 Propargyl alcohol propoxylate PT-PM 3973-18-0 Propynol ethoxylate Product characteristics This product belongs to acetylenic alcohol polyoxyethylene ethers. As a metal corrosion inhibitor, it is especially suitable for steel, copper, and aluminum substrates. Applications 1. Metal corrosion inhibition protection for acidic cleaning. 2. Metal corrosion inhibition protection for rust and scale removal in acidic systems. 3. Oilfield drilling Karen Yuan Sales Department Wuhan Bolachem New Material Co., LTD info@bolachem.com​ Whatsapp/Wechat: 008618086413361 Skype: live:chuntian_334455

Minimum Order: 1 bags

Metal corrosion inhibitor PT-PP, PP-PM Product CAS No. Chemical Composition PT-PP 3973-17-9 Propargyl alcohol propoxylate PT-PM 3973-18-0 Propynol ethoxylate Product characteristics This product belongs to acetylenic alcohol polyoxyethylene ethers. As a metal corrosion inhibitor, it is especially suitable for steel, copper, and aluminum substrates. Applications 1. Metal corrosion inhibition protection for acidic cleaning. 2. Metal corrosion inhibition protection for rust and scale removal in acidic systems. 3. Oilfield drilling Karen Yuan Sales Department Wuhan Bolachem New Material Co., LTD info@bolachem.com​ Whatsapp/Wechat: 008618086413361 Skype: live:chuntian_334455

Minimum Order: 1 bags

Product Description S-8245 is an excellent substrate wetting agent that can be used in both water- based and solvent-based formulations, and also has good results in recoating. Specifications Chemical composition: Polyethersiloxane copolymer Physical form: Transparent liquid Active substance content:100% Application areas Automotive coatings, wood coatings, traffic coatings, leather coatings Scope of application S-8245 is ideal for water-based paints, oil-based paints, tinted paints, and clear paints. It has the functions of substrate wetting, reducing static surface tension and anti-cratering. And it can replace TEGO-245.

Minimum Order: 1 bags