Offers to Sell

Applications: 532nm wavelength: get rid of freckles, eyebrow tattoo, failed eye line tattoo, tattoo , lips line, pigment, telangiectasia in shallow red, brown and pink and etc. light color 1064nm wavelength: get rid of freckles and yellow brown spot, eyebrow tattoo, failed eye line tattoo, tattoo, Birthmark and Nevus of Ota, pigmentation and age spot, nevus in black and blue, scarlet red, deep coffee and etc. deep color. 1320nm wavelength: shrink pores removal, poblackhead removal, skin tightening and whitening, skin rejuvenation, wrinkle removal . Working Principle: The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 532nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue

Minimum Order: 1 bags

Model: QM-Q2 New Technology Mini Whitening Face Laser Portable Q Switched Nd Yag 1064 532 Nm Tattoo Removal Laser Device Carbon Peel Applications: 1) 1064nm: for treatment of tattoo removal, dermal pigmentation and treating certain pigmentary conditions such as Nevus of Ota and Hori is Nevus. (mainly for black and blue pigmentation) 2) 532nm: for treatment of epidermal pigmentation such as freckles, solar lentigo, epidermal melasma, etc.(mainly for red and brown pigmentation) 3) Black Carbon Head(NALR-1320nm): For deep cleaning, skin whitening, skin rejuvenation, shrink pores, acne treatment, wrinkle removal etc. Working Principle: The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 532nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue

Minimum Order: 1 bags

Applications 1. Permanent hair removal for all skin types and all hair colors! 2. Skin rejunvenation 3. Pigments removal 4. Wrinkle removal 5. Acnes removal 6. Vascular Removal Working Principle IPL Intense Pulse Light("IPL") used broad spectrum of white light and with filters to marrow the spectrum to target specfic chromophores and structures. IPL is a non-invasive skin treatment that emits powerful bursts of light energy to treat unwanted hair, sun damaged skin, and wrinkles, etc. without damaging the surface of your skin, IPL systems use flash xenon lamps to emit micro pulses of light across a broad band of visible wavelengths. IPL work by using particular wavelengths of light that is called by melanin which colors the hair and brown skin and black. Since melanin absorbs light to be warm or hot, that the production of cells called melanocytes and melanin are denatured more produce more melanin. By using gentle pulses of light momentarily to create heat, IPL can permanently disable hair follicles, preventing hair follicles` future growth. The melanin in the hair (which gives it its colour) absorbs the light, which is then converted into heat. This heat is transferred to the growth cells surrounding the root of the hair, disabling them. By the IPL, pigments are Shattered and eliminated out of body via metabolism. At the same time,IPL also helps increase collagen production, which rejuvenates the skin leading to a more youthful, radiant, bright and few fine wrinkle skin. The light with long wavelength can pass through epidermis to the hair follicles deep underneath the skin. At the targeted area, IPL occurs heating to destroy follicles and hair structures leading to permanent hair removal. SSR It is a revolutionary approach, rather that bombarding your skin with high amounts of damaging energy. SSR fires multiple shots but at low Joules, in doing so it gently heats the hair follicle to the heat needed and the most you will feel is warmth and a tingling sensation, some clients comparing it to a warm massage. SSR also utilizes In-Motion technology, where the hand piece is always in motion over the skin.

Minimum Order: 1 bags

Applications Hair removal. Skin rejuvenation, Pigments removal Acnes Removal Vascular Removal Wrinkle removal. Working Principle It is a revolutionary approach, rather that bombarding your skin with high amounts of damaging energy. fires multiple shots but at low Joules, in doing so it gently heats the hair follicle to the heat needed and the most you will feel is warmth and a tingling sensation, some clients comparing it to a warm massage. utilizes In-Motion technology, where the hand piece is always in motion over the skin. Professional Multifunctional IPL Hair Removal Skin Rejuvenation Ice Platinum Permanent 808nm Diode Laser Hair Removal Machine

Minimum Order: 1 bags

Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple- wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

Minimum Order: 1 bags

Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now. It is performed using gold standard Triple-wavelength 755nm,808nm,1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety

Minimum Order: 1 bags

Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now. It is performed using gold standard Triple-wavelength 755nm,808nm,1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

Minimum Order: 1 bags

Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

Minimum Order: 1 bags

The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters, electronic mechanical meters and electricity meter error by the way of automatic, semi-automatic or manual operation. It composes of single phase programmable power source, high precision single phase reference energy meter, meter suspension test rack, Multi-channel server and precision clock source etc. GF1000 meter test bench is applied in the measurement centre of grid company energy measurement department of power supply company and energy management utility, industrial enterprise and meter manufacturers. Specification Warranty: 3 years Power: Electronic Other attributes Customized support: OEM, ODM, OBM, Software reengineering Place of Origin: Beijing, China Brand Name: GFuve Model Number: GF1000 Accuracy: 0.02%, 0.05%, 0.1% Power supply: AC 180-265V, or 3x220/380V±15%, frequency 50/60Hz. Measuring range: 0-480V/0.1A-120A Harmonic setting: 2-51 times Power Pulse Output type: Active pulse, reactive pulse Power Pulse Input set range: (1--599999999)/kwh Input Energy pulse type: Active pulse, reactive pulse Declaration of conformity: CE & CNAS certified Communication port: RS232 Dimension: Cabinet size: 800 * 600 * 1850mm; Bench size: 2*2400 * 760 * 1846mm

Minimum Order: 1 bags

Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. ( including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now. It is performed using gold standard Triple-wavelength 755nm,808nm,1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

Minimum Order: 1 bags

Product Description 7x 7 x 0.3 Monocrystaline CVD Product description: Characteristics of CVD: The film formed by CVD deposition is dense and uniform, the deposition speed is fast, the quality of the film is stable, and mass production is easy to achieve. However, the deposition temperature of CVD is very high, usually between 900°C and 2000°C, which easily deforms the parts, thus limiting the selection of substrates, deposited layers, or the quality of the resulting workpieces. We offer a large range of CVD diamond seeds in various sizes at affordable prices Product details: Size Available: Crystal growth process: Single crystal CVD Color: Near colorless Available size : 3x3x0.3 4x4x0.3 5x5x0.3 6x6x0.3 7x7x0.3 8x8x0.3 9x9x0.6 10x10x0.3 11x11x0.3 12x12x0.3 13x13x0.3 15x15x0.3 Advantage: 1) Regular shape, uniform size. The size can be strictly controlled according to customer needs. 2) High repurchase rate and high cost performance, well received by customers. 3) No visible growth lines,under 100x microscope without impurities. 4) The stress is good, the number of times of reuse is high, and it is not easy to crack. 5) The best quality of all seeds known on the market. Orientation: 4pt/100 Shape: Square, Retangle Size Available : 3*3*0.3, 5*5*0.3, 6*6*0.3 ,7*7*0.3, 8*8*0.3, 9*9*0.3,9*9**0.5 10*10*0.4, 12*12*0.4 13*13*0.5 14*14*0.3 15*15*0.3 Edges Green Laser Cut Laser Kerf < 2° Lateral Tolerance: +0.2/-0 mm Thickness Tolerance +0.1mm/-0 mm Roughness, Ra (Choose one from three) 1. Two sides polished, Ra < 10 nm 2. One side polished,the other size is The other side is the cutting surface, or growth surface 3.Both sides are unpolished. Product Image: Square 7x7 Monocrystalline Diamond 0.3mm Single Crystal CVD Diamond Plate 0 Square 7x7 Monocrystalline Diamond 0.3mm Single Crystal CVD Diamond Plate 1

The GF3000 series stationary three phase energy meter test bench is a fully automatic system that enables simultaneous, multi-position calibration and verification of three-phase electric energy meters error. Full compatibility with IEC 60736, excellent parameters, superior functionality and outstanding flexibility, It adopt the most advanced electronic measurement technique and modular concept combine the difference three phase reference standards and power amplifier. GF3000 three phase meter test equipment is applied in the measurement centre of grid company energy measurement department of power supply company and energy management utility, industrial enterprise and meter manufacturers. Specification Warranty: 3 years Power: Electronic Customized support: OEM, ODM, OBM, Software reengineering Place of Origin: Beijing, China Brand Name: GFuve Model Number: GF3000 Accuracy: 0.02%, 0.05%, 0.1% Power supply: AC 180-265V, or 3x220/380V±15%, frequency 50/60Hz. Measuring voltage range: 57.7V, 100V, 220V, 380V (max 480V) Voltage Output load: 1500VA Measuring Current range: 0.1A, 0.25A, 0.5A, 1A, 2.5A, 5A, 10A, 25A, 50A, 100A, 120A Current Output load: 1500VA Power factor measurement range: -1 ~ 0 ~ 1 Power factor measurement accuracy: 0.0005 Dimension: Cabinet size: 800 * 600 * 1850mm; Bench size: 2*2400 * 760 * 1846mm Declaration of conformity: CE & CNAS certified

Minimum Order: 1 bags

PRODUCT DESCRIPTION PN30 1/4 inch Forged Brass Ball Valve with L Type Handle Description ​Working Pressure 30 bar (435 psi) Working Temperature –20°C ~150°C (-4°F~302°F) In Absence Of Steam Thread ISO228 (equivalent to DIN 259 and BS2779) Opening/closing Test 10,000 times ​​ Details ​Brass Body: High-density forging, no blister, no air holes, no leakages,corrosion preventive. Made by high precision automatic CNC machines. Brass Bonnet: High-density forging, no blister, no air holes, no leakages,corrosion preventive. Made by high precision automatic CNC machines. Valve Ball: Smooth and good wear resistance, with good sealing performance. Brass Valve Stem: Made of hot rolled brass, high strength, good toughness, long-term use without deformation and fracture. Ball Seat: Made by pure PTFE(polytetrafluoroethylene), with high elasticity and wear resistance. Handle: Aluminium alloy T handle, professional surface painting, wear resisting, anti-corrosion. Small appearance, flexible in open and close. O-ring: NBR & FKM, made of imported raw material, small friction coefficient, long service life and not easy to leak. Stainless Steel Locknut: Internal design of anti-loose, can be used for long time. customization The entire product can be customized just to meet your needs. Company Profiles Taizhou Yuehao Technology Co., Ltd. is located in Qinggang Industrial City, Yuhuan City, Zhejiang Province, in the centralpart of China's Golden Coast and the southern wing of the Yangtze River Delta Economic Circle. The company currentlycovers an area of 10000 square meters and has over 100 outstanding employees. It is a professional valve manufacturer that integrates research and development, production, and sales. FAQ Q: How long is your product guarantee period? A: We have five-year guarantee and comprehensive after-sales process. Q: What is your MOQ? A: We have no MOQ. We have a large warehouse so that we can deliver goods immeditly. Q: Can you accept OEM? A: Both of OEM and ODM are acceptable for us. Q: How long is your delivery time? A: For the items if we have enough stocks, we can send to you immediately. For mass production, we can promise 30-45 days because we have a considerable number of automated equipment for 24-hour production.

GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. And it also can be used as voltage, current and power meter to measure AC parameters of three phase power line. It can measure wave distortion factor and 2nd to 64nd harmonic wave. GF312B calibrator is used for grid corporation of measurement and energy test center, metrological service of power supply bureau, national energy measurement of testing authorities. Specification Warranty: 3 years Power: Electronic Customized support: OBM Place of Origin: Beijing, China Brand Name: GFuve Model Number: GF312B Accuracy: 0.05%, 0.1%, 0.2% Power supply: 220V ± 10% or 110V ± 10%, 50/60Hz ± 2Hz Test voltage range: 0-600V Voltage test error: ±0.05% (30V-600V) or ±0.02% (30V-600V) ±0.1% (0.1V-30V) Test current range: 1mA-12A Active power error: ±0.05% (0.01A-12A); ±0.1% (0.001A-0.01A) Reactive power error: ±0.1% (0.01A-12A) Active energy error: ±0.05% (0.01A-12A); ±0.1% (0.001A-0.01A) Reactive energy error: ±0.1% (0.01A-12A) Weight: 3 kg

Minimum Order: 1 bags