Offers to Sell

Description AHU Clean Room HEPA Filter For Laminar Air Flow Hood H12 H13 H14 Clean Room Ahu Filter Purification Efficient HEPA Filter Air Filter For Laminar Air Flow Hood H12 H13 H14 Features With Its Ability To Handle Large Air Volumes While Maintaining Low Resistance, This Filter Is An Ideal Choice For A Wide Range Of High Cleanliness Work Environments. It Achieves A Remarkable Efficiency Of 99.97% To 99.999% (H13-U16) At 0.3 Μm, And Is Meticulously Inspected One By One According To GB6165 Standards. Technical Data Model Dimension(mm) Air Flow (m³/h) Resistance(Pa) Efficiency ZNPG-U45 1170*570*69 1000 102.1 99.9995% ZNPG-H50 1170*1170*69 2000 63.6 99.995% ZNPG-U45 1170*570*69 1500 67.8 99.9995% ZJNPG-H50 1170*1170*69 2960 93.5 99.995% AHU Clean Room HEPA Filter For Laminar Air Flow Hood H12 H13 H14 0AHU Clean Room HEPA Filter For Laminar Air Flow Hood H12 H13 H14 1

Introduction Sodium chloride is an ionic compound with the chemical formula Na Cl. It is a colorless cubic crystal or a fine crystalline powder with a salty taste. The appearance is white crystal, and its source is mainly seawater, which is the main component of table salt. Soluble in water, glycerin, slightly soluble in ethanol (alcohol), liquid ammonia; insoluble in concentrated hydrochloric acid. Impure sodium chloride is deliquescent in air. [1] The stability is relatively good, and its aqueous solution is neutral. Industrially, the method of electrolytic-ally saturated sodium chloride solution is generally used to produce hydrogen, chlorine and caustic soda (sodium hydroxide) and other chemical products (commonly called chlor-alkali industry). It can be used in ore smelting (electrolytic melting of sodium chloride crystals to produce active metal sodium), medically used to configure physiological saline, and daily life can be used for condiments. Basic Information Product Name: Sodium Chloride Other Name: Industrial Salt MF:Na cl CAS No.:7647-14-5 EINECS No.:231-598-3 Apearance: White Crystal Molar Mass: 57.4474 g/mole Inspection Standard: GB/T5462-2015. Application: Basic chemical raw material.Mainly used in the production of soda and caustic soda,glass,leather,fine chemical products etc. Transportation and storage: It should be stored in dry,ventilated and clean storeroom,not outdoor storage;Avoid sun and rain during transportation.Keep away from moisture and sunshine ,the packing should be handled lightly to prevent the packing from being damaged during loading and unloading,the storage should be separated from toxic and harmful substances. Guarantee period: 3 years Package:50kg/bag,25kg/bag,1000kg/bag

Minimum Order: 20 square metres

Introduction: Artificial Rutile is also called Synthetic Rutile. Its TiO2 content varies from 91% to 96% depending on the processing technology. It is a high-quality substitute for natural rutile. Application: Synthetic Rutile can be used to make high-quality welding electrodes; titanium dioxide can be used to make high-grade white paints, coatings, lightening agents for rayon, white rubber and fillers for high-grade paper. Titanium, titanium metal, enamel products and electrode coatings can also be used to produce artificial rutile yellow pigments.

Minimum Order: 20 square metres

Introduction: High Titanium Slag (High Titanium Slag) is a common name for high-content enrichment of titanium dioxide produced by melting and separating titanium dioxide and iron in ilmenite by means of electric furnace heating and melting. Its main component is TiO2, which usually has 90% and 92% content specifications. It is a high-quality raw material for the production of titanium tetrachloride, titanium and titanium sponge. Main Chemical Composition: TiO2 Appearance: Black Powder Application: to be used to produce titanium tetrachloride, welding rod, titanium dioxide Packing: 25KG/bag, 1 ton/bag, according to customer requirements.

Minimum Order: 20 square metres

PRODUCT DESCRIPTION Two-Color Temperature COB Light Source High Cri Integrated Cob Led Chip Features: Features: - 36 W small LES COB LED - 3-step MacAdam ellipse - LESφ14mm - Size: 19 x 19 mm Series:Intelligent dimming TB series - 2700K-6000K intelligent stepless dimming and toning; - 90Ra, various Ra schemes are optional; - Dimming products, same power better light effect, same luminous surface better light power; - Advanced packaging process, replacing CSP, CSC packaging; - Light source secondary internal optics, better light pattern layout; - 120LPW@90Ra 2700K universal solution, high quality; - Certified by LM-80 and EN62471 Typical Applications • Portable (flashlight, bicycle) • Uplighters/Downlighters • Decorative/Entertainment (stage light) • Bollards/Security/Garden • Indoor/Outdoor Commercial and Residential Architectural • Automotive Ext (Stop-Tail-Turn, CHMSL, Width Lamp) Technical Specifications of Cob Led Chip Advantages of a CoB LED Using a single LED can result in simpler design and product as well as providing optical advantages for uniform light and efficient optics. Electrical design is simpler because the CoB LED only requires a single two-wire power supply to the entire array of chips. Part No. Power (W) CCT (K) CRI Max (lm) VF (V) IF (mA) Efficacy (lm/W) TB2514L LESφ14mm SIZE:19*19mm 36 2700 90 3650 36.5 1000 100 6000 90 4015 36.5 1000 110 We believe our customers’ expectations belowing are self-evident: Safe and easy transactions; Quick delivery; Products are designed with easy operation; Prompt feedback and problems solving; Trusted suppliers and brands; Creative, quality products with good price; Safe and Easy are our first principle! Packaging and delivery Packaging Details Safety package for led cob 5w full spectrum Anti-static plate in deal with empty space. One plate with 100 units,and one box with 50000 units. Selling Units: Multiple of 1000 Package size per batch: 20X20X20 cm Gross weight per batch: 2.000 kg FAQ Q : Can your products’ label, packaging, design be customized? A : Yes, we offer customization service on these. Q : What is your monthly production capacity? A : Our factory production capacity is 50,000 sets of lighting systems per month. Q : What is your minimum order quantity? A : Normally MOQ 100pcs, but we also accept small sample order for quality clients. Q : Can I get a sample for quality check? A : Yes, we offer sample. Q : How soon is the lead time? A : For sample order, 3-5 days. For bulk order, 15-35 days. Q : What is the lifetime of your lighting systems? A : Our lighting systems can work at least 3 years, these lighting bulbs should be replaced regularly. Q : How can you guarantee the quality? A : Professional product quality inspection team ensures order defective rate; Otherwise, we take full responsibility according to our wholesome after-sales support system. Q : What are your terms of payment? A : Payment terms vary among different countries. Generally, 30% T/T in advance, 70% balance before shipment.

Custom 5 axis cnc milling anodizing aluminum cnc turning parts Description of Turn-Mill Compound Parts: The integration of turning and milling operations into a single machine offers several advantages. It reduces setup time and eliminates the need for part repositioning, resulting in improved efficiency and reduced production costs. Additionally, turn-mill compound parts often exhibit higher accuracy and better surface finish compared to parts produced using separate machining processes. Craft Customized OEM cnc machining milling turning parts service Available materials Aluminum, copper, brass, stainless steel, steel, iron, alloy, zinc etc. Drawing Formats PRO/Engineer, Auto CAD(DXF,DWG), Solid Works , UG, CAD / CAM / CAE, PDF,TIF etc. Testing Equipment CMM;Tool microscope;multi-joint arm;Automatic height gauge;Manual height gauge;Dial gauge;Marble platform;Roughness measurement. One stop processing CNC Turning, Milling parts, Drilling, Auto Lathe, Grinding, EDM wire cutting, Surface Treatment, etc. Tolerance +/-0.002mm, 100% QC quality inspection before delivery, can provide quality inspection form. Anodizing Aluminum Cnc Turning Parts Machining Custom 5 Axis Cnc Milling 0 FAQ: Q1: Where can I get product&price information? A1: Send us an inquiry in Alibab page or e-mail, we will contact you after upon receipt your mail. Q2: How soon can I get samples and how much the fee? A2: Depending on your specific project, it usually takes 10 to 20 days. the fee depends on the product drawing, and the fee will be returned to your bulk order. Q3: How to enjoy the OEMservices? A3: Usually, base on your design drawings or original samples, we give some technical proposals and a quotation to you, after your agreement, we produce for you. Q4: Can you make machining parts based on our samples? A4: Yes, we can make measurements based on your samples to make drawings for machining parts making.

Description 2023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 2023 New Version Luxury Wholesale High Speed New Energy Electric Vehicle MG Rising Auto R7 Used SUV EV Car About Us Dingrao Auto Sales Co. Is A Company Specializing In Auto Sales And Service. The Company Was Founded In 2015 And Is Located At No. 52, Baihe Road, Nanan District, Chongqing, China. After Years Of Development, The Company Has Become A Well- Established Automobile Sales Enterprise. In Terms Of Domestic Business, The Company Focuses On The Sales And After-Sales Services Of Various Brands Of Automobiles. The Company Has A Wide Range Of Sales Channels And Customer Groups, Including Individual Consumers, Enterprises And Institutions, And Governmental Organizations. The Company's Sales Network Covers All Parts Of The Country, Enabling It To Provide Timely And Convenient Services To Its Customers. In Terms Of Foreign Business, We Actively Carry Out International Trade And Have Established Long-Term Cooperative Relationships With Automobile Manufacturers In Many Countries And Regions. Our Products Are Exported To Europe, America And Asia, Etc., And Are Highly Trusted And Praised By Local Customers. 2023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 0 2023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 1 Why Choose Us Our Company Has Established Close Contact And Cooperation With Chang'an, MG, BYD And Other Brand Factories For Many Years, And We Have Our Own Many Kinds Of Modification Workshops. Our Company With Advanced Production Equipment And Professional Technicians, We Are Committed To Creating Personalized Customization Services For High-Quality Cars. We Have A Wide Range Of Products, Including Sedans, SUVs, MPVs And So On, To Meet Your Various Needs And Make Your Car Unique. 2023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 22023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 3 Description Rising Auto R7 Is A Luxury Pure Electric SUV, Which Adopts The RISING MAX Giant Screen True Color Triple Screen And RISING OS Intelligent Cabin Interaction System, Bringing Drivers A Smarter And More Convenient Driving Experience. In Addition, Feifan R7 Is Equipped With Huawei's Enhanced AR-HUD Flat View System, Allowing Drivers To Access Road Information More Intuitively. In Terms Of Power, Feifan R7 Offers Single Motor And Dual Motor Models For Consumers To Choose From, With Maximum Power Of 150kW And 250kW Respectively.In Terms Of Range, Feifan R7 Offers 642km And 551km Versions. All In All, Feifan R7 Has Become A Luxury Pure Electric SUV Worth Looking Forward To With Its Excellent Performance And Rich Configuration. 2023 Luxury Electric Vehicle Car High Speed New Energy Electric Vehicle MG Rising Auto R7 4 Specification Rising Auto R7 Car Body Steering Wheel Left SIZE 4900x1925x1655 Wheelbase 2950.mm Body structure 5door 5 seats SUV Curb Weight 2168.kg Gross Weight 2613.kg tire size 235/50 R20 Electromotor Motor type permanent magnet synchronous motor Maximum motor power 250KW Maximum torque of motor 450N.m Battery type Ternary lithium battery Battery capacity 77kwh Pure electric range 570km Max.speed 200km Charging time 10.5 hours/Fast charging/0.5 Number of driving motors One-motor Speed changing box Number of gears 1 Gear shift type Single-speed transmission for electric vehicles Transmission type Fixed gear ratio gearbox Chassis-steering systems Drive Mode front-engine, front-wheel-drive layout Front Suspended system Macpherson type independent suspension Rear Suspended system Multi-link independent suspension Steering system Electric assist (EPS) Car body structure integral body construction Safety equipment Airbags driver/ copilot/Front side ABS ✔ Hill-start Assist ControL ✔ ESP/DSC, etc ✔ TPMS ✔ Driving mode switching Sport/Economy/Standard Parking radar ✔ Bluetooth car phone ✔ Large color screen 15.05 Car play/car life ✔ backup camera 1 Configuration Number of USB/ type-c ports:4pc USB / C loudspeaker:14pc imitation leather seat Near high beam:LED Remote control of mobile phone Camera 2pcs FAQ Q. Is There Any After-Sales Service? A:We Support The Maintenance Of The Vehicle Free Technical Support And Other After- Sales Services. Q. What Kind Of Payment Terms Can Be Acceptable? A. We're Flexible For Payment Terms, Including TT, LIC, DP, OVA And Alibaba Online Payment Q. What Brands Do You Have? A. We Have Established Long-Term Strategic Cooperation Partnership With MG, Changan, BYD, Tesla, VW, Roewe, Zeeker, Leapmotor, Rising Auto, Geely, Avatr, Li Xiang, Chery, Hycan, NIO, XPeng, Neta, DongFeng, Wuling, Buick, Toyota, Honda, Etc. We Are Dealing With The Most Popular Vehicles Made In China. We Have A Wide Range Of Vehicle Brand And Models. Q. How You Control The Quality Of Your Products? Our Products Testing Process Is Strictly Monitored To Ensure Our Clients Will Get The Best Quality Goods. From Production To Packaging , Our QC Will Process Three Times Inspection . Good Culture Is Our Culture. Q. What Is The Ordering Process? 1). Select Your Preferred Car, Confirmed The Price And Delivery Term With Our Sales. 2). We Create Alibaba Trade Assurance Order Or Prepare The PI With Bank Details. 3). Make Deposit Payment Or Issue L/C. 4). After Deposit Payment Confrmed, We Get The Vehiclels Ready. 5). Balance Payment Should Be Done Before Goods Delivery. Q. What Kind Of Trade Terms Available From Your Side? A. We Can Deal By EXW, FCA, FOB, CFR, DAP, CIF, DDP. Etc. Q. How About The Delivery Time? A. The Delivery Time Will Be Various By Different Cars, Please Contact With Our Sales Online Service For Details.

PRODUCT DESCRIPTION General Description: ANJEKA-6043 is a polymer dispersant for dispersing pigments in solvent-based coatings. Product Information: Chemical Composition: Hyperbranched polyester compound containing amino anchoring functional groups. The data provided on this sheet are typical values and not technical specifications. Appearance: Light brown fluid Acid Value (mgKOH/g): 10-20 Amine Value (mgKOH/g): 5-15 Density (g/cm³ at 23℃): 1.10-1.25 Viscosity (cps at 25℃): 2500—2800 Non-Volatile Content (%): 98 Storage and Transport: Before use, thoroughly stir the product; separation or oiling off may occur at temperatures below 0℃. Heat to 30℃—40℃ and stir evenly. Storage duration is not recommended to exceed 12 months. Application Guidelines: For use in the coating industry and printing inks. Features and Benefits: 1. Enhancement of Visual Characteristics: Amplifies the shine, vibrancy, and anti-clumping attributes of organic pigments. 2. Reduction of Fogging: Diminishes fogging resulting from uneven dispersion, ensuring a clearer and more consistent appearance. 3. Effective Darkening of Coatings: Particularly potent in intensifying the darkness of coatings, particularly in the dispersion of high-surface carbon black. 4. Process Efficiency Improvement: Contributes to the reduction of milling time, leading to enhanced production efficiency. 5. Increased Coating Stability: Elevates the storage stability of coatings, offering extended durability over time. Application Areas: 1. Coating Industry: Ideal as an additive for dispersing pigments in solvent-based coatings. 2. Printing Ink Sector: Recommended for use in printing inks, ensuring the stability of organic pigments, with a focus on carbon black. 3. Compatibility with Resins: Exhibits compatibility with a variety of resins commonly employed in coatings, including polyester resin, polyurethane resin, and acrylic resin systems. Recommended Levels: Additive levels (as purchased) based on pigment: Organic pigments: 10%—50%. Titanium dioxide or inorganic fillers: 0.5%—2%. Inorganic pigments: 4%—8% Carbon black: 10%—30% High surface carbon black: 40%—80% The above data are empirical amounts; optimal levels should be determined through a series of experiments. Processing Instructions: For optimal performance, add the additive to the grinding medium first and then add the pigment. Packaging: —25kg iron drum —200kg plastic drum Our service: 1. Reply within 24 hours. 2. High-quality products and reasonable price 3.R&D technology support. 4. Professional team service 5. Customiszed production for different package 6. No delay on shipment Our team: Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 0 Our company: Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 1 Hyperbranched Polymer Acrylic Dispersing Agent In Paint Anti Flocculation 2 We are building a new large-scale production base strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022. Benefits to our customers and collaboration partners: • stable large-scale production, better quality control • lower production unit cost Collaboration Opportunities: • contract manufacturing and OEM/ODM collaboration opportunities Our Certifcate&Patents Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 2Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 3 Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 6

Product Description Products: M=0.5-2.5mm, High Precision (ISO 5-6 Grade) Electric Car Model Gear The number of teeth, module and accuracy range of electric car model gears are important parameters in the processing technology, as follows: 1.Number of teeth: Calculate the number of teeth of each gear based on the design requirements and transmission ratio. For electric car model gears, the common tooth number range is between 10 and 50 teeth, and the specific value is determined according to actual needs. 2. Module: Module is one of the basic parameters of the gear, indicating the size of the gear teeth. In electric vehicle model gears, the selection of the module is related to the number of teeth and is generally determined based on the transmission ratio and speed requirements. The common module range is between 0.5- 2.5mm, and the specific value is determined according to actual needs. 3. Accuracy range: Accuracy is one of the important indicators to measure the quality of gear processing. For electric car model gears, the accuracy requirements are higher and generally need to be within a certain accuracy range. Products M=0.5-2.5mm, High Precision (ISO 5-6 Grade) Electric Car Model Gear Service Customized Shape Bevel gear Gear Teeth manufacturing Cutting/Grinding Module (M) ≤4 Teeth Accuracy Grade ISO 6-7 Grade Heat Treatment Carburization and quenching/Carbonitriding/High frequency/Quenched and tempered...... Hardness Hardened

PRODUCT DESCRIPTION Cosmetic Acrylic Jar Small Glitter Packaging Jar Cosmetic Packaging Jar Description Glitter jars can be used for various purposes, including sensory relaxation, mindfulness exercises, or simply as a decorative piece to add a touch of shimmer and glamour to a space. They are often found in classrooms, therapy rooms, bedrooms, or as decorative accents in events and parties. Some glitter jars may include additional elements like sequins, beads, or other small decorative objects to enhance the visual appeal. The glitter jar features a transparent or translucent glass or plastic container, allowing the glitter inside to be fully visible. The jar is usually cylindrical or spherical in shape, with a secure lid or closure to prevent glitter from spilling out. Cosmetic Packaging Jar Application Diamond acrylic cream jars offer an attractive and visually appealing packaging option for skincare and cosmetic products, combining functionality, aesthetics, and brand presentation. Clean and sanitize: Before using the jar for the first time or refilling it, ensure that it is clean and sanitized. Wash the jar and its components (lid, inner disc, etc.) with warm soapy water, rinse thoroughly, and let them air dry. This step helps maintain hygiene and prevents contamination of the product. Cosmetic Packaging Jar Specifications Model Number ZY-J05 Product Name: Cosmetic Acrylic Jar / Small Jar / Packaging Jar/cream Jar / Glitter Jar Container Size: 45×44 Capacity: 30ml-500ml Lid: Screw/Flip/Pump/Crimp/Other Shape: Round/Square/Oval/Rectangle/Cylinder/Other Mate , rial: PMMA Volume: 5g Color: White/Black/Pink/Blue/Green/Yellow/Red Logo: Customized Logo Accepted Usage: Cosmetic/Skin Care/Hair Care/Other Small Glitter Packaging Cosmetic Acrylic Jar PMMA 5g Cosmetic Jar 0 Small Glitter Packaging Cosmetic Acrylic Jar PMMA 5g Cosmetic Jar 1 FAQS Q1: What materials are commonly used for cosmetic packaging jars? A1: Cosmetic packaging jars are commonly made from materials such as plastic (PET, PP, acrylic), glass, or metal. Each material has its own advantages in terms of durability, transparency, and aesthetic appeal. Q2: Can I customize the size and shape of the cosmetic packaging jar? A2: Yes, cosmetic packaging jars can often be customized in terms of size and shape. You can choose from various options like round, square, oval, or even unique custom shapes. The size can also be adjusted to accommodate the desired volume of your cosmetic product. Q3: What types of closures are available for cosmetic packaging jars? A3: Cosmetic packaging jars typically have various closure options, including screw-on lids, snap-on lids, flip-top lids, or pumps. The choice of closure depends on factors such as the product consistency, ease of use, and desired level of product protection. Q4: Can I add my branding or logo to the cosmetic packaging jar? A4: Yes, many packaging suppliers offer customization options, allowing you to add your branding, logo, or artwork to the cosmetic packaging jar. This helps create a unique and cohesive look for your product and enhances brand recognition. Q5: Are there minimum order quantities (MOQs) for cosmetic packaging jars? A5: Yes, there is usually a minimum order quantity (MOQ) requirement for cosmetic packaging jars. The MOQ can vary depending on the supplier and the specific customization requirements. It's important to inquire with the supplier about their MOQ policies.

Last Friday, James emailed that he would place an order for 1,200 hydraulic threaded cartridge valves for his last inquiry. This is the PO he sent to AAK after visiting 6 China hydraulic valve factories. It is a little surprised the first cooperation is 1,200 hydraulic threaded cartridge valves. James is from Spain. At the beginning of last year, he was assigned by the headquarters to the Guangzhou office to be responsible for the purchasing from China hydraulic valve factories. In early March, James sent an email saying that the epidemic policy of Ningbo can accept visitors. For the hydraulic threaded cartridge valve quoted last time, the headquarters asked him to visit the China hydraulic valve factories before placing an order. He planned to visit China hydraulic valve factories in Ningbo a few days later. AAK hydraulic valve is his first stop. Three days later, James came to AAK hydraulic valve and asked to visit the workshop directly instead of the office. I took James to visit the whole production line of AAK hydraulic valve, from the first raw material inspection to the processing of hydraulic threaded cartridge valves, including heat treatment of semi-finished products, rough machining, finishing, cleaning, inspection of parts, assembly, inspection, packaging, warehousing and other processes. We also introduced the equipment and processing advantages and characteristics of AAK hydraulic valves. He looked the fixtures modified by ourselves for a long time. Two hours later, James said he would go to other China hydraulic valve factories and left AAK. I'm not sure how many days he stayed in Ningbo and visited how many China hydraulic valve factories. I didn't know about his trip to Ningbo until his email last Friday. He visited 6 China hydraulic valve factories. I asked James why he chose AAK hydraulic valve to place an order after visit 6 China hydraulic valve factories and placed such a large order directly to AAK suddenly. James replied that AAK is the most distinctive China hydraulic valve factory in China he has seen, mainly including the following details: 1、AAK advanced Swiss imported CNC machine tools, honing machines, CNC precision automatic lathes and pressure test bench impressed him deeply, especially those modified fixtures, which have not been seen in other China hydraulic valve factories. 2、AAK has 6 senior engineers in the industry, especially the hydraulic valves in the high-pressure category, with the concept of German HAWE, which makes him feel at ease about quality. AAK inspectors used a strong spotlight to check the valve hole, which made him refreshing. In particular, a few of those whose finish does not meet the requirements are picked out, which shows that AAK is harsh on quality. He has never seen such detailed inspection in other China hydraulic valve factories he visited. 3、Although the hydraulic threaded cartridge valve of AAK is about 10 ~ 20% more expensive than the other 5 China hydraulic valve factories, he believes that the service life of AAK hydraulic valves is 1 ~ 2 times longer than that of them. China hydraulic valve factory, AAK has a cleanliness obsession in quality, which is even more QC than QC. You can also have a small try! https://www.aakindustry.com/info-detai , l/china-hydraulic-valve-factories-aak214

Adam, an old American hydraulic customer, sent AAK 3 emails consecutively on the same day last month, for the leakage of a hydraulic cartridge flow control valve. According to the picture he sent, the hydraulic cartridge flow control valve has a cut-off plate that is supported by a spring. Some customer complained that the hydraulic cartridge flow valve leaked without working. The original manufacturer of the hydraulic cartridge flow control valve cannot solve the problem in 3 months. Because the sales volume of this hydraulic cartridge flow control valve is very good, Adam wants it 100% no complaints. Through the pictures, it is difficult to trace the cause. I suggested Adam send us 3 samples of the original hydraulic cartridge flow control valves. After we received and checked the samples, we found that the leakage was more serious if we pressurized, but the tightness of the cut-off plate was no problem. We adjusted the spring, and the first pressurization did not leak, but after 3 times, the leakage occurred. It was basically judged that the spring has hidden danger. After the spring tension test, it was found that the spring is abnormal. 2 days later, we informed Adam of the hidden danger of the spring, and at the same time, we replaced the internal springs of the 3 hydraulic cartridge flow control valves with AAK springs, and returned the samples to him. 2 weeks later, Adam sent a PO for this hydraulic cartridge flow control valve, with a value of more than 30,000 dollars, and told us that the 3 returned samples were tested for 5 pressurizations, and no leakage was found, and the operating efficiency of the hydraulic system was also improved by nearly 10%. Adam privately ridiculed himself. He has been engaged in the hydraulic valve market for so many years, but still has to ask for help from AAK when there is a problem that he cannot solve. The main reason why AAK can effectively solve the leakage problem caused by springs, is to ensure the following 3 points: 1. We have our own spring source that has cooperated with us for 10 years, to avoid the phenomenon of unequal material between the sample and the production spring, and ensure the quality. 2. Equipped with spring tension and compression tester, reasonably select the spring with elastic coefficient within the standard range, to avoid leakage caused by elastic coefficient deformation. 3. A quality inspection department to ensure that the quality is qualified during assembly and prevent leakage. AAK hydraulic cartridge flow control valve, 3-step check on the spring, zero leakage, welcome to try! https://www.aakindustry.com/info-detai , l/cartridge-flow-control-valves-aak469

For a hydraulic valve manufacturer, if you produce hydraulic valve standard parts like your peers, without your differentiation or difference, you can only rely on a set of hard technical indicators of quality to make the market. I think this is the hard indicator of hydraulic valve manufacturing industry. The first thing for a hydraulic valve factory is quality positioning. I ask our engineers, workshop directors and technicians, even apprentices, to benchmark the global first-line hydraulic valve brands in terms of quality awareness, at least surpassing the quality of domestic first-line hydraulic valves. Otherwise, you are not suitable for hydraulic valve production in AAK. If you don't get the masterly skill really masterly, you are not qualified to enter the hydraulic valve market. With masterly skill, you have the confidence to produce orders for hydraulic valves from the world's top 500 enterprises. “Zhiliang”, also known as “Pinzhi”, is both quality in English. I don't understand why some hydraulic valve manufacturers have no differentiation, and the quality and technical indicators are strong neither. What does it depend on to win the world? Unless you cheat. Each industry has its own quality standards. At the same time, each product has its own enterprise quality standards, and the peers are different. This is the quality positioning. The positioning of AAK hydraulic valves is to benchmark the global first-line hydraulic valve brands. In recent years, AAK has never wanted to recruit new engineers, because it is very difficult to change an engineer's cognition, which takes 18 months, and it will take another 18 months for him to do it, totally 3 years, but maybe he left in the second year, and he had to say something he thought he was right. The manufacturing of hydraulic valves is exquisite. This characteristic is in the upstream of the manufacturing industry - materials, key parts, manufacturing equipment, etc. need long-term investment, continuous tracking and the awareness of excellence, which is also the embodiment of the "craftsman spirit". No matter how iterative the technical cycle of the hydraulic valve is, your skills must not age, the craftsman spirit must not be lost, and the masterly skill must be really masterly. The road of quality is just like practice Buddhism or Taoism. The practice of good people has to go through thousands of risks and obstacles, same as the difficulty of eighty adventurous experiences before Tang Sanzang finally got the real Buddhi , st scripture. In the first few years of AAK hydraulic valves, we had to take a detour. There are a lot of south walls to hit, pits to fall and tuition fees to pay. Maybe this is the growth of AAK. Growth is as painful as death, and the essence is also the same as death. It means the disappearance of old quality standards and the birth of new quality standards. Accept it, face it. Then, we can constantly upgrade and grow into what we expect. AAK hydraulic valves, quality is the highest principle. https://www.aakindustry.com/info-detail/hy , draulic-valves-aak213

A few days ago, Jackson, who is engaged in hydraulic manifolds procurement from Honeywell, one of the world's top 500 companies, asked me a question. Can you sum up the differences between AAK hydraulic manifolds and other China hydraulic manifold manufacturers in one sentence? Without thinking, I told him about 3 points: learn from the advanced, be close to the “rich”, and follow the right path ". The 13 years of AAK hydraulic manifolds relies on adhering to these 3 points. To learn from the advanced, first of all, we should be good at learning from excellent peers, especially from the leading international brands. I warn my engineers that we do not pursue the most advanced technology, but we must be close to advanced enterprises, and take stability and reliability as our lifeline. Various types of hydraulic cartridge valves are the core components of hydraulic manifolds. SUN, HydraForce and HAWE etc, these No. 1 brands in the mass market or the niche market, are the target of AAK's learning and benchmarking. We often dissect their new models, learn design, refine elements, analyze process, optimize technology, and gradually form a complete AAK hydraulic manifold system from the original design, processing drawings, material selection, material heat treatment, process sheet, processing technology, assembly, and testing. Be close to the “rich”, cooperate with the strong, and cooperate with the world's top 500. They are interested in the manufacturing quality, function reliability and performance stability of your hydraulic manifolds. They talk to you about quality and service in a comfortable way, then you have more motivation and responsibility. It also contributed to AAK's willingness to invest in R&D, equipment iteration and talent introduction, and gradually became a strong player. Follow the right path. If there is a shortcut in manufacturing, taking the right path is the only shortcut. This is not only a long-term principle, but also a way to avoid detours, which is also the core of continuous operation of manufacturing enterprises. To do something and not to do something is to be a hero. If you tell a lie, you need to tell at least 10 more lies to cover the original lie, which is too tired and annoying. Drug dealers and arms dealers must earn a lot of money, but we can't do it. What good is it to do something that has no positive significance to society? There are universal axioms and universally recognized moral bottom lines in this world. No matter what industry and product an enterprise is in, it should follow these axioms and bottom lines. Google's business philosophy of "Do not be evil" is very reasonable. Many enterprises believe that "strength is the truth". They believe that with the support of capital, market input regardless of cost, and consumers fooling, they can achieve huge sales and profits. They believe that with market share, users will cater to them. In fact, this is to begin at the wrong end. Only your manufacturing quality continues to benchmark the authoritative brands, and the reliability of the function and the stability of the performance, adhere to the right path, not be impatient, is the source power. It is hard to engage in manufacturing industry, especially the hydraulic unit, the hydraulic manifold with technology, which is slower, more stupid and more solid than others. It is the smart people who make toil efforts. There is no shortcut to this road. There is no safe haven. Without “1”, the manufacturing quality takes the lead in the front, any more 0 after will eventually return to zero. Just like life, whether you can stand on the waves, and whether you can hold on the bottom of the waves. The manufacturing quality of hydraulic manifolds relies in slower, more stupid and more solid work of intelligent people. There is no shortcut to this road. There is no safe haven. Without “1”, the manufacturing quality takes the lead in the front, any more 0 after will eventually return to zero. Just like life, whether you can stand on the waves, and whether you can hold on the bottom of the waves. AAK hydraulic manifolds, learning from the advanced, close to the “rich”, and taking the right path, we will move forward together. https://www.aakindustry.com/info- , detail/hydraulic-manifolds-aak401