Offers to Sell

PVC Pipe for Water Supply and Drainage with Customized Size and Color PVC Pipe Features:  1) Light weight, easy to load and unload: UPVC pipe is very light, convenient to handle loading unloading, and installing.  2) Good chemicals and drugs resistance: UPVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.  3) Small resistance to fluidity: The smooth surface of UPVC pipe reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.  4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.  5) Good electrical insulation: UPVC pipe has excellent insulation nature against electricity. It can be served as conduits and pipes in construction cable and wire.  6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.  7) Simple installation: Very easy to connect, thus much time and labor cost may be saved.

Minimum Order: 1000

Product Description Trina Solar Mono-Facial 415w 420w 425w 430w 435w High Quality Solar Pv Panels With TUV Double-glass solar panels also incorporate safety features such as built-in bypass diodes, which help prevent damage due to hot spots or shading on individual cells. Bypass diodes allow electrical current to flow around shaded or damaged cells, ensuring that the panel continues to generate electricity even if a portion of it is affected by shading or cell damage. Model No. 415 420 425 430 435 Warranty Product Warranty 15 Years Power Warranty 25 Years of 84.8% Output Power Electrical Data at STC Maximum Power (Pmax) 415 Wp 420 Wp 425 Wp 430 Wp 435 Wp Voltage at Maximum Power (Vmpp) 41.7 V 42 V 42.2 V 42.3 V 42.5 V Current at Maximum Power (Impp) 9.94 A 10.01 A 10.08 A 10.17 A 10.24 A Open Circuit Voltage (Voc) 50 V 50.1 V 50.2 V 50.3 V 50.4 V Short Circuit Current (Isc) 10.55 A 10.58 A 10.61 A 10.64 A 10.67 A Panel Efficiency 20.80% 21% 21.30% 21.50% 21.80% Power Tolerance (Positive) 1% 1% 1% 1% 1% Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m2, cell temperature 25°C Electrical Data at NOCT Maximum Power (Pmax) 312 Wp 317 Wp 321 Wp 325 Wp 329 Wp Voltage at Maximum Power (Vmpp) 38.7 V 39.2 V 39.5 V 39.7 V 40 V Current at Maximum Power (Impp) 8.07 A 8.1 A 8.13 A 8.17 A 8.23 A Open Circuit Voltage (Voc) 47.1 V 47.1 V 47.2 V 47.4 V 47.5 V Short Circuit Current (Isc) 8.5 A 8.53 A 8.55 A 8.6 A 8.65 A Temperature 43±2 °C Nominal Operating Cell Temperature (NOCT): 800W/m2, AM 1.5, windspeed 1m/s,ambient temperature 20°C Thermal Ratings Operating Temperature Range 40~85 °C Temperature Coefficient of Pmax 0.34 %/°C Temperature Coefficient of Voc 0.25 %/°C Temperature Coefficient of Isc 0.04 %/°C Maximum Ratings Maximum System Voltage 1500 V Series Fuse Rating 20 A Material Data Panel Dimension (H/W/D) 1762x1134x30 mm Weight 21.8 kg Cell Type Monocrystalline Cell Number 144 Glass Type Anti-reflection Coating Glass Thickness 3.2 mm Encapsulant Type EVA Frame Type Anodized Aluminium Alloy Junction Box Protection Class IP 68 Connector Type MC4 Cable Crossection 4 mm2 ➤ Designed for compatibility with existing mainstream optimizers, inverters and mounting systems ➤ Perfect size and low weight. Easy for handling. Economy for transporting ➤ Diverse installation solutions. Flexible for system deployment Universal solution for residential and C&I rooftops • Designed for compatibility with existing mainstream optimizers, inverters and mounting systems • Perfect size and low weight. Easy for handling. Economy for transporting • Diverse installation solutions. Flexible for system deployment Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 0 ➤15 year product warranty ➤ 25 year performance warranty with lowest degradation; ➤Minimized micro-cracks with innovative non-destructive cutting technology ➤Ensured PID resistance through cell process and module material control ➤Mechanical performance up to 6000 Pa positive load and 4000 Pa negative load Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 1 Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 2 Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 3 Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 4Trina Solar Photovoltaic Modules Mono Facial Solar Panel 415w 420w 425w 430w 435w 5

PRODUCT DESCRIPTION 5000V 3050mm blue Insulation, anti-interference bipolar cable assembly wire harness 1.Product description 5000V 3050mm blue Insulation, anti-interference bipolar cable assembly harness composed of wires of two polarities (positive and negative), suitable for transmitting power or signals. With a rated voltage of 5000V, it can operate in high-voltage environments, such as high-voltage power transmission, industrial control systems, and high-voltage equipment. Insulation impedance is 5MΩ, conduction impedance is 3Ω, the materials used are in line with ROHS environmental protection requirements.​ Feel free to contact with us, if you ever needed to consider your wire harness solution. 2.Product information Product Name 5000V 3050mm blue Insulation, anti-interference bipolar cable assembly wire harness Harness material Pass ISO13485,ISO9001,ULand ROHS certification Product application Industrial control systems, electronic equipment, etc Length, color Customized according to customer needs Samples Samples confirmed first before mass production Serve Whole-course specially-assigned follow-up, to provide fast and efficient service Test requirement Electrical performance test, flame retardant test,connectivity testing and reliability testing MOQ Negotiable After- , sales service Free warranty for 6 months 3. Picture of real products 5000V 3050mm blue Insulation, anti-interference bipolar cable assembly wire harness 0 4. Application area I: High voltage power transmission: In the field of high voltage power transmission, the harness can be used to connect transmission lines, substations, and power distribution equipment, among others. It carries high-voltage power signals to ensure stable and reliable transmission and supply of high-voltage power. II: Industrial control systems: The anti-interference characteristics of the harness make it very suitable for industrial control systems. These systems include automated production lines, robot controls, PLC systems, and others. Wire harnesses can provide reliable signal transmission and ensure accurate control and coordinated operation of industrial equipment. III: High voltage devices: This harness plays a key role in connecting and powering devices that require large voltages. This includes power transformers, power capacitors, power transmission equipment, and others. Wiring harnesses provide safe electrical isolation and stable signal transmission in high voltage environments. 5. Features I: Bipolar cable assembly: The harness contains bipolar cable assembly, that is, wires with two polarities (positive and negative). This design is suitable for the transmission of power or signals, such as DC power or control signals. II: High voltage class: The harness has a rated voltage of 5000V and is suitable for high voltage applications. It can safely and reliably carry high voltage power signals. III: Blue insulation: The wire harness is insulated with blue insulation material. The blue insulation design helps to differentiate from other wiring harnesses during installation, maintenance and identification, providing convenience and identification. 6. Main products I: Wiring harness of industrial control equipment: Power wiring harness, signal wiring harness, control wiring harness, data wiring harness, video wiring harness, motor wiring harness, debugging wiring harness, cabinet wiring harness. II: Medical equipment wire harnesses: Endoscope wire harness, infusion pump power cord, ECG lead wire, monitor cable, electric operating table wire harness, electric knife wire harness and mechanical arm wire harness. III: New energy wire harnesses: Charging harness, energy storage harness, electric vehicle harness, navigation harness, automotive harness, instrument panel harness, sensor harness, compressor harness. IV: Other equipment wire harnesses: Communication equipment wiring harness, outdoor waterproof wiring harness communication equipment wiring harness, power cord/distribution box wiring harness, etc. Welcome to draw custom wiring harness. We need you to offer the Trademark Authorization to us.

Automatic X-RAY The Automatic X-RAY is mainly used to detect of Dynamic windings lithium battery.Two sets of imaging system online detection analysis, for the multi- layer winding power battery online automatic detection Automatic X-RAY XG5200A/5200B Inspection object Winding type power battery planar positive and negative pole piece alignment inspection. Usage The Dynamic winding lithium battery testing equipment is mainly used to detect of Dynamic windings lithium battery.Two sets of imaging system online detection analysis, for the multi-layer winding power battery online automatic detection   Dynamic winding lithium battery testing equipment Characteristics (1)Automatic detection Automatic detection and sorting OK/NG product. (2)The database modeling Customers can freely modeling models as many as 60 according to the testing standard.Automatic switching by reading bar code or QR code . (3)Real-time monitoring All actions ,signal,and the state of the hardware are real-time monitored and displayed on the software interface . (4)Intelligent matching battery Software automatic determine the A or B type batteries, match the AB model together into the next manufacturing process. (5)Images and data online displaying. In order to convenience of observation and recognition,data and images of many parts of the same battery test are shown in the same software interface. (6)Safety and environmental protection The whole equipment with good protective function,  all part of the fuselage surface radiation meet safety standards. XG5200A technical parameters   Light tube Light tube voltage MAX 90-130KV (optional as needed) Light tube current MAX 89uA-455uA (optional on request) Focus on size 5-15um Cooling method Forced air cooling   Imaging Systems Type Enhancer / Flat Panel Detector Field of view Φ100mm/114.9mm*64.6mm (optional as needed) Resolution 1024*1024Pixels/1536*864Pixels (optional upon request) Quantity 4 sets Detection accuracy Repeat test accuracy 60um   Efficiency Detection efficiency ≥24ppm (detection of four corners) Error rate ≤2% Missing rate 0% Product Superiority Rate ≥99.5% Safety Standards International radiation safety standards ≤1μSV/hr       Other parameters Computers Industrial control machine / quad-core processor / memory 4G / hard disk 1000G Host size 4000*1600*2200mm Power supply AC220V/10A, about 2500W Temperature and humidity 25 ℃±3 ℃ RH50%±10% Applicable battery size range Length 70~160mm Width 80~180mm Thickness 5~25mm   XG5200A/5200B technical parameters comparison Model XG5200A XG5200B Tube Voltage MAX 90 -130 KV MAX 89 KV Tube Current MAX 89-455uA MAX 455uA Focal Spot Size 5-15µm 5-15µm Cooling Mode Strong wind cooling Strong wind cooling Resolution 1024 x 1024 /1536 x 864 pixels 1024 x 1024 pixels Repeat Accuracy 60µm 60µm Detection Efficiency ≥24ppm ≥10ppm International radiation safety standards ≤1 usv/hr ≤1 usv/hr Dimension(L*W*H) 4000*1600*2200 3500*1500*1700 POWER AC220V/10A,≈2500W AC220V/10A,≈2500W   As one of the leading x-ray manufacturers and battery management system companies in China, Zhengye Technology offers OEM customization services. For more details about our products, please contact our expert team.

Online Hole Checker Usage Hole checker machine is mainly used for drilling quality inspection and analysis of PCB drilling board and finished product board.The defects such as the lack of holes (leaky drill and plug holes), multihole, internal burrs, big holes, small holes, the length, width, Angle and other irreqular shaped holes of the PCB drilling board and finished board are automatically detected, and the equipment for classification of NG/OK is automatically determined. Online Hole Checker Charactrictics Precise : Adopting high-precision CIS scanning system, automatic positioning, image processing and detection technologies. Effcient: when equipped with Multichannel sorting device and small plate parts, multi-channel simultaneous detection is supported; the standard machine can detect both plates at the same time; 3 and 6 channels can be customized at the same time. Characteristics : With network maintenance function, it can use several terminals to view NG board defect information synchronously. and to overhaul the NG board rapidly.   Online Hole Checker Technical parameter Model Length Width Height Measurable thickness Pore size range JK5200 1530mm 1160mm 1050mm 0.3-10mm ɸ0.1-ɸ10mm JK8000 1550mm 1280mm 1520mm 0.3-10mm ɸ0.1-ɸ10mm   About us Guangdong Zhengye Technology Co., Ltd.（Stock Code:300410） is a high and new- tech enterprise and is engaged in researching & developing, producing, selling and after-sale services of intelligent equipment, high-end materials. It was founded in 1997 with a registered fund of 60 million RMB. The company since its foundation, with the concept of "honesty, hard work, innovation, caring" and the purpose to "meet customer’s satisfaction ", it has built and improved its business-oriented, market-oriented and production- research combined technological innovation system. At the same time, it has successfully established many R & D platforms such as Guangdong Ministry of Education production-research combined demonstration base, Guangdong precision instrument R&D center and Guangdong Enterprise technology centers, etc.

Permanent Antistatic Barrier Film It is suitable for isolation between production turnover layers of fine line PCB (line width 75um) to solve problems such as equipment boards and adsorbed sundries in electrostatic environment, minimize damage to PCB boards and improve production quality. Usage It is suitable for isolation between production turnover layers of fine line PCB (line width 75um) to solve problems such as equipment boards and adsorbed sundries in electrostatic environment, minimize damage to PCB boards and improve production quality.   Characteristics 1. Permanent anti-static: the polymer material is fused to form an omni- directional conductive network, and the electrostatic performance life is dozens of times of the ordinary coating anti-static film;Anti-static performance is not affected by the environment, time, permanent as new; 2. Strong chemical resistance: from organic solvents to inorganic drugs, excellent chemical resistance, leading the industry; 3. Strong stability: strong charge export ability makes the product no longer accumulate static electricity, even if the extemal humidity environment changes, the anti-static performance is stable, protect the plate from electric shock.   PRODUCT SPECIFICATION Model Length Width Thickness Surface resistance Resistance value keeping ESDO1A ≤1500mm ≤760mm 0.3-1.0mm 1.00E+06 permanent ESD02A ≤1500mm ≤760mm 0.3-1.0mm 1.00E+06 permanent   Classification (1)Convention , al (2)anti-static Consumables have a great influence on the final quality of your Printed Circuit Board Assemblies. And PCB Consumables also have a large impact on the efficiency of your Production Processes.  Zhengye Technology offers a wide range of premium quality PCB Consumables which includes various options such as PP Filter, Cleaning Cloth, PCB Plastic Container.

Hua Wei CloudEngine S5735 - S24P4X - A 24 Ports POE Sfp Gigabit Ethernet Network Switch Description S5735-S switches are designed for scenarios such as enterprise campus network access and aggregation, as well as data center access. Built on next-generation, high-performance hardware and with Versatile Routing Platform (VRP), CloudEngine S5735-S switches boast advanced features, such as enhanced Layer 3 functionality, simplified O&M, flexible Ethernet networking, and mature IPv6 capabilities. Features Abundant Service Functions Simplified Network O&M Diverse Reliability Protection Product Spectification Product Model CloudEngine S5735S-S24P4X-A Network Switch 24 Port Memory (RAM) 1 GB Forwarding Performance 96 Mpps Fixed Ports 24 x 10/100/1000BASE-T ports, 4 x 10 GE SFP+ ports PoE+ Supported Relative humidity 5% to 95%, noncondensing Operating altitude 0-5000 m (0-16404 ft.) Noise under normal temperature (27°C, sound power) < 58.9 dB(A) Hua Wei CloudEngine S5735-S24P4X-A 24 Port Sfp Switch POE 0Hua Wei CloudEngine S5735-S24P4X-A 24 Port Sfp Switch POE 1 Q: How could I get samples? A: If you need to order sample for checking-up,we would like to ask you to pay for the samples and courier freight. We send the samples to you only after receipt of your payment.if you have an courier account,you can send your courier to collect samples from our company or send us the samples charge together with the courier cost. Q: How much the Courier freight will be for the samples? A: Courier freight depends on weight and carton size, destinations and other relating factors. Q: How can I get your price list? A: Please leave your contact way such as Email/Whatsapp/Skype/Trademanager to us. We will contact you and pass our quotation sheet to you as soon as possible. Q:When can I get the price? A: We usually quote within 8 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

Dust-free Prepreg Automatic Cutting Machine The machine is used for cutting rolled prepreg ,to solve the problems of prepreg spreading and too much dust in cutting and after cutting so as improve the cutting accuracy, quality and efficiecny. Usage The machine is used for cutting rolled prepreg ,to solve the problems of prepreg spreading and too much dust in cutting and after cutting so as improve the cutting accuracy ,quality and efficiecny.   Characteristics 1. The first company to adapt infrared preheating technology in prepreg cutting 2. Low dust,environmental protection, Preheating then cuting, automatic sealing side, without drawing;lncrease the dust collection device,through the detailed calculation and analysis of fluid, reduce dust, environmental health. 3. Precision: using high precision actuator and synchronous servo control system, high cutting precision 4. High quality: cut the Pre-preg neatly, automatic edge banding, no drawing. 5. High efficiency: dynamic heating transverse, longitudinal cutting, cutting efficiency; After cutting the PP sheet can be used directly,without subsequent sealing side, vacuuming, etc; The precision of the cutting, further improve the cutting efficiency is further improved; PP sheet can be automatically stacked; Parameters can be packed up and brought up direcly.   TECHNICAL PARAMETER Model Cutting Accuracy Cutting Length Cutting Width Cutting thickness Size Weight efficiency CQ3000A ±1mm 280mm-750mm 300mm-1260mm 0.04-0.3mm 2800*2200*1900mm 1850kg ≤25 times /64 seconds CQ2000 ±1mm 250mm~750mm 200mm~1270mm 0.02mm~0.3mm 2500*2200*1658mm 1800kg ≤21 times /64 seconds CQ1000 ±1mm 50mm-750mm 200mm-1270mm 0.02mm-0.3mm 2600*2300*1700mm 1500kg ≤17 times /64 seconds The PCB Inspection Solutions made by Zhengye Technology is the ultimate solution for your printed circuit board inspection needs. Our cutting-edge technology provides precise and accurate inspection of your PCBs, ensuring that they meet the highest quality standards.

Automatic X-ray Inspection Machine The X Ray Inspection Machine has a set of X-ray imaging system, four-axis robot automatic loading and unloading, online automatic detection of discrete components in the semiconductor industry, and can adapt to 7-inch, 11-inch, and 13-inch trays. Usage The Automatic X-ray Inspection Machine has a set of X-ray imaging system, four- axis robot automatic loading and unloading, online automatic detection of discrete components in the semiconductor industry, and can adapt to 7-inch, 11- inch, and 13-inch trays. The X Ray Inspection Machine emits X-rays through the X-ray generator, penetrates the inside of the chip, and receives the X-rays from the flat panel detector for imaging. The image is analyzed and judged through image algorithms to determine good and defective products, and through the re-disc function, it is determined that the chip is in place. The serial number in the tray, so that the back end can pick out the bad chips.   Automatic X-ray Inspection Machine Characteristics 1. The self-developed replay algorithm can replay in real time, and replay while taking pictures. 2. Rich man-machine interaction functions. The interface picture can be dragged, zoomed, and you can double-click the NG chip on the replay chart to index and display the original picture, NG type and other information of the chip. 3. The self-developed detection algorithm can automatically and accurately detect defective items such as the line type of the chip and the chip guide. 4. The software has functions such as scanning code, MES uploading, and manual re-judgment. 5. High detection efficiency: the entire disk matrix type drawing, no need to pull the material coil; with CCD vision positioning system, the robot automatically feeds the material. It takes 3min (3000pcs) to inspect the 7-inch tray. 6. Production line docking: with the function of docking with AGV. 7. Safety and environmental protection: The entire equipment is interlocked safely, with triple protection functions, and any part of the surface of the fuselage meets the safety radiation.   Automatic X-ray Inspection Machine Technical Parameter Total size 2010*1850*2300 Total weight 3000kg Packing size 2150*2000*2400 Packing weight 3500kg Machine power 5.5kw Machine efficiency 3.5mins/plate Light tube Closure Maximum voltage 130KV Detector HD FPD Imaging mode 2.0D Measuring size 7-13 inches material Measuring Type discrete component Automatic X-ray Inspection Machine Advantages: (1)Automatic detection Automatic detection alignment of negative and positive of battery, and statistics the maximum/minimum values at the same time. (2)Automatic judgment Automatic make a judgement of NG/OK products according to the setting standard. (3)Convenient and quickly The machine is with accurately position, quick and convenient to user. (4) Safety protection Doors are equipped with photoelectric sensor. The machine will immediately stop and get into a protection model if any door is open.   Automatic X-ray Inspection Machine Applications: Lithium battery, SMT, LED, Electronic products, casting products and so on.   How does Automatic X-ray Inspection Machine Work? Automatic X-ray Inspection Machine uses the penetrating effect of X-ray rays. When X-rays penetrate the objects/material, those objects/materials will absorb part of the X-rays and the rest X-rays will be received by the detector. Different-density objects/materials have different absorbability, which means the detector receives different X-rays after penetrating. It will show the image on display after the detector converts that X-ray into visible light. If you want to know more about the X Ray Inspection Machine, please contact Zhengye now.

PRODUCT DESCRIPTION Description PLC 1756-EN2TR 5570 ETHERNET/IP MODULE Product details Model 1756-EN2TR Brand PLC Description ControlLogix 5570 Module Datasheet/Catalogue PDF File Weight 0.5KG Condition Normal Product Description The ControlLogix® controller provides a scalable controller solution that is capable of addressing a large amount of I/O points. The ControlLogix controller can be placed into any slot of a ControlLogix I/O chassis and multiple controllers can be installed in the same chassis. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, as well as over network links. To provide communication for a ControlLogix controller, install the appropriate communication interface module into the chassis. Application 1.Power industry, the elevator industry, parking, automobile, auto ancillary. 2.feed industry, aluminum smelting machines, refrigeration industry. 3.steel industry, combustion control systems, non-ferrous metal smelting. 4.glass industry, construction machinery, textile machinery, water treatment PLC 1756-EN2TR 5570 EtherNet/IP MODULE 0 Mainly Products PLC module Redundancy Module DCS module Analog input module CPU module Analog output module IO module Digital input module DO module Digital output module AI module Relay Output Module DI module Relay Input Module Power Module Motion control module Ethernet module Network communication module Best Services Assurance 1.High quality 2.Fast Delivery 3.We provide a large number of brand new in stock. 5.There are many products in stock. 6. We only provide the original new items, 100% make sure the best quality! PLC 1756-EN2TR 5570 EtherNet/IP MODULE 1 PLC 1756-EN2TR 5570 EtherNet/IP MODULE 2 RELATED SPOT PRODUCTS 6ES5452-8MR11 FBM203 RH914SV FC-BSDOL-04UNI 6ES5316-8MA12 FBM201 RH914SQ FC-SDO-0824 6EP1333-2BA20 FBM207 P0914TD FS-SICC-0001/L3 6EP1333-3BA10 FBM240 P0917GZ FS-SICC-0001/L8 6EP1334-2BA20 DSMB-01C FC-IO-0001 6EP1334-2AA01 DSMB-02C TP-DSOEP1-100 6EP1337-3BA00 DSSB-01C 51304754-150 6EP1437-2BA20 DSCB-01C IC660BBS102 6EP1437-3BA00 TC-IAH161 IS200ERDDH1A 1C31197G05 TC-OAV081 IS215UCVGH1A 1C31194G04 5069-L306ER IS200EPSMG2A 1C31192G01 MVI56-PDPMV1 P0926KM 1C31189G03 RH924YL P0922YC 1C31116G05 3BDH000013R1 P0922YU 1C31206G01 3BSE076355R1 RH924WA 1C31113G05 3BDH000723R1 RH924UQ Our Company Wuhan Sean Automation Equipment Co.,Ltd established for over 6 years, believes in providing the best quality,we offer and deliver products worldwide.As a factory automation wholesale distributor,we provides quality new parts along with quality on everything we carry. We offer a minimum one-year warranty on all products.satisfied for customers are to our purpose.we have been committed to providing quality parts and equipment at the right price and right time to every clients.Many parts are stocked and available with very short lead times to ensure yourparts are available when you need them. PLC 1756-EN2TR 5570 EtherNet/IP MODULE 3

Detailed Product Description High Light: Aluminum 120mm 4 Core Cable, ASTM Low Voltage Power Cable, PVC 120mm 4 Core Cable Aluminum Core Low Voltage Power Cable ASTM PVC 120mm 4 Core Cable 1kV Application This product is suitable for power lines with rated voltage of 0.6 / 1kV and below, for power transmission, suitable for laying in hotels, stations, airports, high-rise buildings, chemical industry, petroleum platform, power station, subway, tunnel and other fixed laying places. Application Performance The long-term allowable operating temperature of the cable shall not exceed 70℃, and the short-time working temperature shall not be over 130℃. The ambient temperature of the installation should not be lower than 0℃. Minimum bending radius during cable installation: single-core cable not exceeding 20D (D is cable diameter), multi-core cable not exceeding 15D (D is cable diameter) Cable Construction Conductor adopts compact shaped or compact circular structure.

PRODUCT DESCRIPTION 5.6x300mm PVC Coated Stainless Steel Exhaust Pipe Header Cable Zip Tie Strap Product Features: 1. Characteristic:they have an unique ball locking mechanism that alloweasily and quickly installed and not undone. 2. Hight tensile strength:Non-flammability 3. Temperature:working temperature-60c~550c 4. High resistance to acetic acid,alkali acid,sulphuric acid,corrode etc. 5. All length are avaiable,stainless steel type :304,316. 6. Accept width: 5.6mm,9mm,15mm,19mm. all length are avaliable if the width is not change,wihtout extra cost. coated self -locking stainless steel cable tie thickness:1.05-1.1mm. Service life:50years 7. The stainless steel ball is D3.0mm Strong pull(Tensile Strength): 79IBS--100IBS different width,different Strong pull 5.6x300mm Stainless Steel Zip Ties Exhaust Pipe Header PVC Coated SS Cable Ties 0 4. Q: Would you provide SDK for me? A: Yes, we offer free SDK if you order sample.In addition, we also have support engineers to assist you with software development. 5. Q: What is the minimum order(MOQ)? A: We accept one unit for standard products.we can even customized with your logo if needed. If require OEM, will see detailed requirements and confirm MOQ to you from our sales department.

The hydraulic valve blocks designed and produced by AAK not only has high reliability and small pressure loss to ensure that there is no oil running between the channels, but also has compact structure, small occupied space, simple oil circuit and easy pipe layout, so as to ensure the high efficiency requirements of different actions of various actuator elements. The valve block can control the valve, which is easy to adjust and operate. AAK hydraulic valve block was designed and proofed successfully at one time within 1 month, which impressed the engineers of Samhydraulik company. The vast majority of hydraulic valve block manufacturers blindly proofed according to customer drawings, ignored working conditions, and did not understand the internal structure and working principle of hydraulic valve block. It is easy to cause hidden dangers in the hydraulic system, and the problem cannot be found. Justin left a message on AAK website (www.aakindustry.com) asking is the power insensitivity of the hydraulic system related to the hydraulic valve block? We replied that this is difficult to judge because it is a system problem that needs to be checked one by one. Justin emailed us the next day then we understood why he left such a message. Justin is from Samhydraulik in Italy. The power unit of a hydraulic system developed by his company needs a hydraulic valve block. Their engineers mentioned that the sensitivity of the power unit is the key and that all components need to cooperate closely. Justin thought that as long as the hydraulic valve block manufacturer strictly controlled the accuracy according to the drawings, it could be easily done. After the hydraulic valve block is finished, it is installed to test the hydraulic power unit. After the oil pump is started, the instantaneous pressure supply at the oil outlet of the power unit does not come up, and it just supply normal pressure after a few minutes. After checking each component one by one, it is suspected that there are hidden dangers in the hydraulic valve block. After detecting the hydraulic valve block, there is no problem in the oil passage and channel of the hydraulic valve block. Justin contacted the original hydraulic valve block manufacturer for analysis and solution. The manufacturer said that the hydraulic valve block was completely produced in accordance with the drawings of Samhydraulik company, and the accuracy was within the required range, and the reason for problem was unknown. Justin contacted several other hydraulic valve block manufacturers, they all said that they could match the drawings, but not sure about the problems of the hydraulic valve blocks. We asked Justin to tell us the working condition of the whole hydraulic system and the picture of the oil circuit running direction of the hydraulic valve blocks of the original manufacturer. AAK engineers have ideas after 3 aspects of comparative analysis. We told Justin that if your engineer determines that the problem lies in the hydraulic valve block, we will send you two samples of our hydraulic valve blocks to test your hydraulic system. Three days after receiving the samples, Justin informed that the instantaneous pressure supply at the oil outlet of the power unit was normal with AAK hydraulic valve blocks. Their engineers were surprised that AAK completed the design of the hydraulic valve block within 30 days and successfully proofed at one time. The problem of the hydraulic valve block lies in the high integration of the valve block design and the tortuous oil circuit, which will lead to high pressure loss and slow rise of system pressure. AAK engineers improved the design of the hydraulic valve block. The newly designed hydraulic valve block has no oil running between the channels, compact structure, small occupied space and optimized oil circuit piping, which not only has high reliability but also small pressure loss. AAK chief engineer has more than 20 years of technical experience. He is good at cross-sectional view, measurement and perspective of hydraulic valve block design system, multi angle observation of design process, hole connectivity, oil circuit optimization, and the escort of MDTools 3D solid design and virtual manufacturing software and high-precision CNC machining center imported from Switzerland. Many manufacturers do not know the problem of the hydraulic valve block. AAK can improve the design and make a successful proofing at one time within 30 days. I think this is the difference between AAK hydraulic valve block and its peers. AAK hydraulic valve block, not blindly based on drawings, but focused on the working principle, you are welcome to have a small try. https://www.aakindustry.com/info-detail/hy , draulic-valve-blocks-aak160

Mathias, a Dutch hydraulic customer, urgently needed to purchase a batch of hydraulic valve blocks matching the German brand from China at the end of last year. He asked more than 10 old hydraulic valve block manufacturers. They all said that the accuracy of this hydraulic valve block was too high for their technology and equipment. Mathias had a hunch that nine times out of ten, the order for this hydraulic valve block would fail, because he knew that most hydraulic valve manufacturers just have CNC machine tools. But his boss attached great importance to this customer and asked him to implement the hydraulic valve block sample within 30 days. Within a week, Mathias consulted nearly 20 hydraulic valve block factories online and offline, almost all of them just have CNC lathes. Only two of them said that they have Japanese high- precision CNC machine tools. They can try to make samples but are not 100% sure. Two weeks later, Mathias tested the hydraulic valve block samples from 2 factories, and there was still a parameter error of 10% - 13%. Mathias suggested the factory re-make samples, and both factories surrendered. Time has been wasted for 3 weeks. It's only 2 weeks from the deadline required by the boss. Mathias is anxious and has no direction. While chatting with old friend Andy, Mathias revealed his dilemma. Andy is a veteran in the hydraulic valve industry and has cooperated with AAK hydraulic valve for 5 consecutive years. Andy told Mathias that the accuracy of this hydraulic valve block requires not only high-precision machine tools, but also old operators who understand the equipment. Most hydraulic valve block manufacturers are difficult to meet these two requirements at the same time. He suggested Mathias try AAK, who likes to overtime difficulties on high-precision hydraulic valves, and most operators have more than 5 years of experience in operating imported equipment. The subject of Mathias's first email to AAK hydraulic valve was that I was introduced by Andy. He said that the accuracy of this hydraulic valve block can only be produced in AAK. Opening his hydraulic valve block drawing, AAK engineers have 90% confidence. I replied to him directly that if it goes well, we can send the hydraulic valve block samples before the Chinese New Year holiday. Jan 28th is our last working day before CNY and the last day to send samples. Our team was great to send the samples on Jan 28th. When we came back from the Spring Festival holiday, we received an email from Mathias. Their technical team tested the accuracy of AAK hydraulic valve blocks. Each parameter met the accuracy required by the drawing, and almost every parameter was 30% higher than that of other hydraulic valve manufacturers. AAK is also the only hydraulic valve block manufacturer that can match the German brand among all the hydraulic valve manufacturers he contacted. He can finally make a report to his boss. Next, the order confirmation process of hydraulic valve blocks is very smooth. Mathias understood why Andy is optimistic that AAK can achieve the accuracy of this hydraulic valve block. AAK introduced Demage five axis machining center as early as 2 years ago. The allowable rotation range is 115 ° (- 5 ° / + 110 °), which can carry out negative angle machining up to 20 ° and high- precision machining, which can not be achieved by many imported machine tools. At the same time, the torque can reach 1800Nm, the Y-axis stroke can be increased from 1250 to 1600mm, and the maximum speed of milling spindle can reach 8000r/min, while the maximum of conventional CNC can only reach about 5000r/min. As long as the operator is familiar with the performance of the equipment, the hydraulic valve block similar complicated to that of Mathias is successfully proofed at one time. AAK hydraulic valve block is praised by Mathias that it is the only one that can match the German brand. Give it a try! https://www.aakindustry.com/info-detai , l/hydraulic-valve-blocks-aak156