Offers to Sell

Product Description. Brand Sprayidea Item No 90 Product name Screen Printing Spray Adhesive Size 450g/550ml Package 24 pieces/carton Certification SGS Shelf Life 24 months Spray Pattern Mist Effect time 30-60 seconds Color Clear Remain tacky for 45 minutes Bonding Temporary Scent Low odor Country of Origin China Product Details Sprayidea 90 High Temp Screen Printing Spray Adhesive 550ml can (Remain Tacky for 45 minutes) Sprayidea 90 Screen Printing Spray Adhesive is a clear mist adhesive that will hold most textile products, including fleece garments, during the rapid heat cycles encountered in the flash cure process. The degree could up to 200℃. Remains tacky under the high temperatures, will not transfer to the fabric or cause wrinkling. Product Features High temperature resistance up to 200 ℃ No triphenyl, no formaldehyde, eco-friendly Uniform particle, low odor, no transfer to fabric Long open repositionable time, super strong tack. Product Application It’s great for heat transfer, quilting, applique and other temporary bonding applications. Suitable for bonding fabric, cloth, paper, and other light-weight material.

Minimum Order: 1200

Model Number GH-SW640HS- U2 Sensor Type GH-SW640HS Format 640 x 512 Spectral Response 0.9 μ m ~ 1.7 μ m Pixel Pitch 15μ m Active Area 9.6mm x 7.68mm Quantum Efficiency > 70% (1.0 μ m~ 1.6 μ m ) Frame Rate 50 Hz Integration Type snapshot Integration Time 100 μs ~ 20 ms Pixel Operability > 99.5% Full Well Capacity 1.8M e- ADC 14bit Analog video output PAL, SMA interface Digital Output USB2.0 Software Windows Apps /Windows SDK Trigger Trigger / TTL (Optional) Power Input DC 12V ± 2v Power Dissipation < 3W (TEC Off) Dimensions (No Lens) 65mm × 58mm × 64.5mm Lens Mount C- Mount Operating Temp. -20 ℃ ~ +50 ℃ / -40 ℃ ~ + 70 ℃ (Optional) Storage Temp. -40 ℃ ~ + 80 ℃

Spray Adhesive is formulated with good-quality raw materials and conforms to national compulsory standard, which possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc. Features and benefits Environmental: benzene free, no hazardous materials and additives and low VOC. Best bonding effect can be achieved even under temperature around 60°C. Fast drying speed and long viscosity-keeping time. Strong bonding strength and good initial bonding power; water-proof and ageing resistant. Easy application. It is easy to apply the adhesive evenly on the bonding surface and no adhesive legging occurs. Application for use 1,Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. 2, Pour adhesive on the two bonding surface separeately and spread it with brush or scraper. To achieve the best bonding performance, the application should be done toward the same direction and evenly. 3.the adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly. 4,After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5 -8 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive. 5,The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.

Product Description PUR3513-W is a moisture reactive hot melt adhesive, mainly used for bonding metal, glass, wood, PC, ABS plastic and other materials, and has good adhesion to glass with printed layers. BGP Adhesive has the advantages of fast positioning, high production efficiency, and automatic assembly process can be realized. Features: 1) PUR hot melt adhesive 3513-W  has good initial viscosity, fast positioning, short holding time. After gluing and laminating, it directly participates in the subsequent process to improve production efficiency. 2) PUR hot melt adhesive 3513-W has the characteristics of waterproof, shock resistance, pressure resistance, good impact resistance, high bonding strength, good high and low temperature resistance and so on. 3) PUR hot melt adhesive 3513-W has the features of solvent-free, non- irritating, non-toxic and harmless to human body, It can conform with EU environmental protection requirements. Where to use PUR Adhesive PUR hot melt adhesive3513-W  is very  strong adhesion to metal, plastic, aluminum, glass, wood, PP, PC, ABS, etc., and the effective time of bonding is long. Technical  data Test item  Specification value Main ingredient Polyurethane Product Number  PUR3513-W color:  White Solid content 100% Density (g/cm3)  1.04±0.10 Viscosity (130℃) 4200±700 cps Opening hours 60～90 sec  Operating temperature 120～150℃ Temperature range -55～140℃ Application Metal, plastic, wood, PC, ABS, etc. have strong adhesion

Product Description PE primer also called unsaturated polyester primer, is cured by blending the main agent, accelerator and initiator to carry out polymerization bridging reaction. The solvent is styrene, which participates in the reaction when forming a film. Compared with solvent-based wood lacquers, the advantage of PE lacquers is that they have "100% reactivity", which means that the liquid composition can be. Model MODEL Description   ED4040 PE transparent primer   ED4030 PE crystal clear primer   ED4020 PE extra clear primer   ED4010 PE  Super extral clear paint   ED4007 PE white primer   ED4001 PE high fullness white primer   ED4009 PE anti cracking white primer   Mixing ratio temperature Reference ratio (paint: blue water: white water) temperature Reference ratio (paint: blue water: white water) 10~15℃ 100kg：2.2kg：2.5kg  or 100L：2.4L：2.3L 20~25℃ 100kg：1.5kg：2.0kg 100L：1.65L：1.85L 1 , 5~18℃ 100kg：2.0kg：2.3kg or 100l：2.2L：2.05L 25~30℃ 100kg：1.2kg：1.6kg or 100L：1.35L：1.45L 18~20℃ 100kg：1.7kg：2.2kg or 100L：1.9L：1.95L 30~35℃ 100kg：0.7kg：1.3kg or 100L：0.80L：1.2L Remark When the humidity is reduced, the amount of blue water can be reduced. When the humidity increases, the amount of blue water should be increased appropriately. Note: we must use our assort products, such as thinner , blue water, white water, etc., and ensure that all products are within the warranty period. Thinner dosage depends on spray viscosity.

PU white primer Product Description Pu white Primer SD2023 is a fast-curing, high solid white primer for application on wood or wood products. It is a two-component  , and it has the  excellent filling properties, good flexibility and excellent sanding properties. Features of PU PRIEMR Strong hiding power Good leveling property Good whiteness Where to use of pu primer Strongly recommended for interior wood furniture. It can be used on MDF , PLYWOOD , SOLID WOOD ETC . Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting. Product Data of pu primer Model SD2023 Solvent Type Solvent base Resin Type  Alkyd resin Pot life 4 hours Color White Viscosity Mixture 11''-13'' (DIN 2) Specific Gravity Approximately 1.52kg/L Solid Content 78±2% Dosage per SQM 110-130 gram Application Data Spray : conventional spray gun . Brush : goat hair brush. The substrate must be sound, clean, dry and free from dust, oil, grease,laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.

UV Roller Varnish For Paper Product Description UVG-250 uv roller varnish is suitable for the whole-sheet roll coating of paper (applicable substrate: copper paper and white card paper, etc.). With good adhesion, flexibility, wear resistance and other characteristics, to provide good luster, wear resistance and other properties. This product is a base-free light oil, which can simplify the process and save the production cost. Safety standards Of UV Roller varnish: (1)UVG-250 uv roller varnish  Meet the EU EN71 PART 3 standards for heavy metal content. (2)UVG-250 uv roller varnish   Comply with the limit requirements of the Revised Directive (EU) 2015 / 863 as in Appendix II of the EU RoHS Directive 2011 / 65 / EU. (3) Pass the phthalate (or ester) safety standards. (4) Comply with EU Regulation No.1907 / 2006. Ink technical parametersOf UV Roller varnish: project surface Viscosity (25℃. Coat 4 cups) adhesion Insulation levelling property metric transparency liquid 26 ± 2 seconds good good good project alcohol resistance Gloss / 60° gloss Light solid energy Curing speed UV absorption peak metric Level 4 85 ± 3 degrees 50~80mj/cm2 ≥40M /min 365nm Recommended Instructions of UV Roller varnish: 1. Stir or shake well before use to prevent stratification of light oil during placement. 2. The viscosity of UVG-250 uv roller varnish has been adjusted to the use viscosity. Generally, special diluent is not required. 3. When used, the coating thickness is recommended to be 10~12um, and the coating amount of 10g / ㎡ UV photofixation energy is set to 50~80mj / cm2The transfer speed is set to about 40M / min to ensure sufficient curing, otherwise the surface return adhesion and paint loss during the placement process will occur. 4. It is recommended to choose more than 2 medium and high pump lamps, line power 100W / ㎝, single lamp power 5k w / branch, lamp pipe is 12~15 ㎝ away from the substrate, lamp service life of 800 hours, replaced in time after aging, to ensure full curing.

冬季厚羊毛实心针织围巾基本针织领 女人 类型：女士围巾 材质：羊

Minimum Order: 100

Product Name: Essential warmth for autumn and winterprinted large shawl collar Type: Women's scarf Material: Cashmere/ Cotton/ Acrylic/ Polyester/ Wool/ Chenille and custom OEM & ODM: design, fabric, size, color, logo, packaging, Decoration MOQ: "It doesn’t matter if your order quantity big or small, We would like start from small MOQ to promote future cooperate." Payment Terms: T/T, L/C, Paypal, Western Union, Cash, Trade Assurance, ect. Delivery Time: 3-7 working days Shipping Port: FOB/CIF Tianjin or request. Factory location: TIANJIN

Minimum Order: 100

女式V领经典搭扣格子条纹女式针织 , 开襟毛衣 类型：女士毛衣开襟衫 , 材质：羊绒/棉/腈纶/涤纶/羊毛/雪尼尔 , 和定制 OEM和ODM：设计，面料，尺寸

Minimum Order: 100

秋冬唇纹圆领毛衣女式宽松 下装套

Minimum Order: 100

i2C i6S intelligent programmer for iPhone screen true tone/Face ID/battery/earpiece receiver flex cable/headphone lightning cable/vibrator/fingerprint repair, one-click jailbreak IOS device. Multi- functional i2C i6S programmer for iPhone 6-14 Pro Max repair. i2C i6s added dot matrix activation board for fixing iPhone Face ID issues without soldering. But i2C i6S new dot matrix activation board needs to be used with a 5V 2.4A charger and data cable, which is not included in the I6S package. You need to get them yourself. i2C i6S programmer read and write iPhone 12/12 Pro/12 Pro Max/12 mini/13/13mini original screen true tone data to fix iPhone 12/13 series screen true tone function. Note: If you want to use the battery, you can only use the original iPhone 7 battery. Function: 1. For iPhone 8-13 Pro Max Original screen True Tone repair. 2. For iPhone 8-13 Pro Max logical/base-band chip reads and writes. 3. For iPhone 6-14 Pro Max/iPad battery data read and write and repair. 4. For iPhone X-12 Pro Max handset row detection and repair. 5. For iPhone 6-12 Pro Max Query Bluetooth /WiFi code after jailbreak. 6. For iPhone 6-13 Pro Max One click query mobile phone crash analysis. 7. For iPhone 8-13 Pro Max Free computer without original screen repair True Tone. 8. For iPhone 7-13 Pro Max Touch/light sensitive/ vibration repair. 9. For iPhone X-14 Pro Max dot matrix data reading and burning. 10. One-click jailbreak on some IOS devices. 11. One-click detection of headset data cable. 12. More APP functions and small boards will be added indefinitely. I2C FA02 Face Integrated Chip Dot Matrix IC For iPhone X-12 Pro Max(5pcs/set). i2c dot matrix flex cable for iPhone X-12 Pro Max(10pcs/set). i2c battery flex cable for iPhone 11-13 Pro Max(6pcs/set) Features: 1. Support iPhone 7-12ProMax Screen True Tone repair: Exclusive support for 12 series original screen True Tone repair. 2. Support No original screen repair original color: Connect the phone to the device and trust the authorization The device automatically reads the phone's cover code, Click to restore the original color. 3.Support iPhone 5SE-13ProMax Battery repair: battery health modification, cycle clearing, battery data reading, modification, and burning. 4.Support iPhone X-12ProMax Face ID repair: Support dot matrix data detection, reading, burning: (1) Connected to the mobile phone can support face module data query, Cloud backup dot matrix data,never lost. (2) Buckle the lattice module It can detect,read and burn lattice data. (3) Button dot matrix module+ connect mobile phone Module data query,cloud backup dot matrix data,burning operation. 5.iOS Device one-click Jailbreak.Support free computer one key jailbreak, query Bluetooth /WiFi code, handset row detection. Support model:A8- A11/iOS12.0-14.8 6. Connect WiFi to upgrade the latest firmware. Enter the Settings, support language switch, WiFi/Bluetooth Settings, Sound Settings, software upgrades, view about the machine. Quad-core 64-bit high-performance processor, Strong scalability and faster response. Free WiFi connection upgrade the device software version. Built-in Bluetooth 4.2 channel and WiFi Speed 150Mbps integrated module. Description: Item Name: i6 intelligent programmer Model: i6S Product size: 130*76*22mm Packing size: 170*115*48mm Net weight: 94g Packed weight: 220g Material: (ABS+PC) Color: Deep Grey Main control chip: RK3308B Memory: 256M DDR3 Processor: Quad-core 64-bit ARM Cortex-A35, 1.3ghz Memory 1: 1GB eMMC NandFlash: 256MB Memory 2: SPL Flash 256MB Reserve Micro SD (TF) card slots WiFi/Bluetooth: WiFi speed 150Mbps, Bluetooth 4.2

Minimum Order: 1 bags

Product Name Manufacture Liquid Injection Molding Silicone Led Projector Lens In China Model Number HHSL01 Material Optical Liquid Silicone Hardness 70 Shore A Color Transparent Mold Type LSR Injection Molding Surface Polish Glossy Process LSR Injection Molding- Inspection- Deflashing- Inspection- Dust Free- Inspection- Packing- Inspection- Delivering Mold Private Mold Mold Cavity Customized Machine Arburg LSR Injection Molding Machine 420C Machine tonnage 120T Workshop Class 100,000 clean optical workshop and class 10,000 light performance inspection room MOQ 1,000pcs/ size Application Led Projector Lighting, Digital Projector Lighting, Medical Devices Intercoms EXW, FOB, CIF, DDP, Or Delivery To Assembly China Factories

Liquid Injection Molding Silicone Optical Lenses Silicone Lenses Advantage: 94% light transmittance, made of highly transparent optical liquid silicone raw materials Class 100,000 optical clean workshop Resistant to yellowing, UV light and micro-cracking High temperature resistant, up to 150℃ Design flexibility for LED light optical parts High fluidity helps to achieve complex micro-structure designs Optical liquid silicone lenses can be over-molded with other materials