Offers to Sell

Mechanic MD5 Pen Multimeter Pen Type Meter Auto Range Digital Multimeter It can be measured by adjusting it to a thermometer, and there are two ways to measure it, Fahrenheit and Celsius Because the temperature transfer process will be lost, there will be a small error Features: Measuring AC / DC voltage Measuring resistance/capacitance Non-contact voltage detection Data retention/Hertz Induction detection On-off buzzer detection Zero Line detection Sound/light alarm Automatic shut-down Backlit bright screen Package included: 1 x Multimeters 1 x Test leads 1x Battery (Optional)

Minimum Order: 1 bags

Handheld 9205M LCD Digital Multimeter Mobile Phone Repairing Testing BEST DT9205M digital multimeter is an easy to operate, accurate readings, full-featured, compact, easy to carry, use battery-powered handheld large screen LCD Multimeter for phone motherboard repair, DT9205M digital multimeter for three and a half, the table can be used to Measure DC voltage / electric, AC voltage / current, resistance, capacitance test, diode test, transistor HFE measurement and circuit off, etc.. Performance : DC Voltage: 200mV-1000V ± (0.5% +1) AC voltage: 200mV-700V ± (0.8% +3) DC Current: 20mA-20A ± (0.8% +1) AC Current: 20mA-20A ± (1% +3) Resistance of 200?-2000M? ± (2.5% +3) Capacitance 2nF-200?F Crystal diode test is Diode test Beeper is Automatic shutdown is Power supply 9V, 6F22 Maximum Display 1999

Minimum Order: 1 bags

MIJING C20 Motherboard Layerer test fixture For iPhone 12/12 mini/12 Pro/12Pro max. MJ C20 4 IN 1 iPhone 12 series logic board function tester for iPhone 12/12 Mini/12 Pro/12 Pro Max motherboard upper/lower layer tester. MJ C20 test fixture for iPhone 12 series motherboard separating testing repair. Function: 1. MJ C20 separating test fixture test platform is used for iPhone 12/12mini/12Pro/12Pro max motherboard separating repair. 2. Support motherboard without middle frame test. 3. Accurate alignment : Every test rack has experienced many tests, quality assurance.

Minimum Order: 1 bags

Digital Multimeter UT89X UT89XD True RMS 20A Current 1000v Voltmeter Resistance Capacitance Transistor LED Tester. Features: 1. UT89X/UT89XD is a reliable hand-held 3 5/6 bit digital multimeter with true RMS sine wave measurement. 2. It can measure Max. 1000V DC/AC voltage, Max. 20A DC/AC current, resistance, capacitance, frequency, diode, hFE, continuity and NCV, quickly distinguishing between neutral and live wires accurately. 3. UT89X can measure temperature and detect neutral and live wires with a test lead. UT89XD can perform LED test. 4. Equipped with audible and visible alarm, flashlight and auto backlight functions, this series can be used in dark environment. 5. It attracts users with its bi-color durable case, modern exterior and multiple functions. Product Specifications: 1. 1000V AC/DC； 20A AC/DC 2. True RMS, 6000 count 3. Dual range NCV test which quickly identifies neutral and live wires through light intensity 4. Audible/visual alarm 5. Capacitor charging indicator 6. Ergonomic design 7. Double injection molding 8. 1m drop proof 9. Flashlight; Auto backlight Notice please: battery no include!

Minimum Order: 1 bags

　　NQKSF Bearing Oil Seal is a high-quality sealing product that is widely used in various industries. It is designed to prevent the leakage of lubricants and other fluids from bearings and other rotating equipment. This article will provide an overview of the material, application, and advantages of NQKSF Bearing Oil Seal. 　　Material: 　　NQKSF Bearing Oil Seal is made of high-quality materials, including rubber, metal, and other synthetic materials. The rubber material used in the seal is specially formulated to provide excellent sealing performance and resistance to wear and tear. The metal part of the seal is made of high-grade steel, which provides excellent durability and strength. The synthetic materials used in the seal provide additional resistance to heat, cold, and other environmental factors. 　　Application: 　

Minimum Order: 100

　　NQKSF Skeleton Oil Seal TC Type is a type of oil seal that has a skeleton structure. It is made of high-quality materials, which makes it durable and long-lasting. This type of oil seal is widely used in various industries, such as automotive, machinery, and aerospace. In this article, we will discuss the material, application, and advantages of NQKSF Skeleton Oil Seal TC Type. 　　Material 　　NQKSF Skeleton Oil Seal TC Type is made of high-quality materials, including a metal skeleton, a rubber sealing lip, and a dust lip. The metal skeleton is made of high-strength steel, which provides a strong support structure for the sealing lip. The rubber sealing lip is made of high-quality rubber, which has excellent sealing properties and can withstand high temperatures and pressures. The dust lip is made of special materials, which can effectively prevent dust and dirt from entering the sealing area. 　　Application 　　NQKSF Skeleton Oil Seal TC Type is widely used in various industries, such as automotive, machinery, and aerospace. In the automotive industry, it is used to seal the engine crankshaft and the gearbox. In the machinery industry, it is used to seal the hydraulic cylinder and the hydraulic pump. In the aerospace industry, it is used to seal the aircraft engine and the landing gear. 　　Advantages 　　NQKSF Skeleton Oil Seal TC Type has several advantages over other types of oil seals. First, it has a strong support structure, which provides excellent stability and durability. Second, it has a high sealing performance, which can effectively prevent oil leakage and dust intrusion. Third, it has a wide temperature and pressure range, which makes it suitable for various applications. Fourth, it has a long service life and requires less maintenance, which can save time and money for users. 　　NQKSF Skeleton Oil Seal TC Type is a high-quality oil seal that has a skeleton structure. It is made of high-quality materials, which makes it durable and long-lasting. It is widely used in various industries, such as automotive, machinery, and aerospace. Its advantages include a strong support structure, high sealing performance, wide temperature and pressure range, and long service life.

Minimum Order: 100

Name: Outdoor Survival Multifunctional Bracelet Color: silver Material: Stainless steel Size: length 24.74CM, width 3.05CM, thickness 6MM Single weight: 170 grams Features: 1. High quality stainless steel material, durable 2. One thing is multi-purpose, that is, a screwdriver and a bottle opener, which can be worn with a watch Contact information: Shenzhen JYC Technology Ltd; Whatsapp/Wechat:+86-13714911587 Skype:ivy_b , othwinner E-mail :sales1（@）bothwinner.com

Minimum Order: 500

Name: Tesla car mount base Material: ABS+TPE Color: black, white+black Size: 70*55*60mm Weight: 48.0g Matching ball head: 17mm universal ball head Compatible: Tesla modle Y, Tesla modle 3 Features: thick and stable Contact information: Shenzhen JYC Technology Ltd; Whatsapp/Wechat:+86-13714911587 Skype:ivy_b , othwinner E-mail :sales1（@）bothwinner.com

Minimum Order: 500

1. Specifications 3 2. Hardware Description 3 3. Terminal Installation 4 4. Device Status Light 5 5. Mobile APP 5 6. BAANOOL IOT’s Web Version 6 7. GPRS configuration for live real-time tracking 7 7.1 APN Setting 7 7.2 Configure user name and password of GPRS 7 7.3 Configure domain name and port 8 7.4 GPRS mode 8 8. Function Details 8 8.1 Changing Password 8 8.2 Authorization 9 8.3 Single Tracking 9 8.4 Sleep tracking strategy 10 8.5 Smart angle updating 11 8.6 Location based service (LBS) / Cell-ID tracking 11 8.7 Listen 11 8.8 Forwarding incoming SMS messages 11 8.9 SIM Card Balance Enquiry 12 8.10 ACC ON/OFF Alert 12 8.11 Remote immobilizing 13 8.12 Fuel sensor calibrating 13 8.13 Configure times of alarm 13 8.14 Alarms 14 8.15 Remote controller（For B/D model） 16 8.16 Arming 16 8.17 Silent Arming 16 8.18 Disarming 17 8.19 Alarm function in arming state 17 8.20 WiFi hotspot (For C/D model) 18 8.21 Check WiFi hotspots (For C/D model) 18 8.22 Modify WiFi hotspot password (For C/D model) 18 8.23 WiFi camera (For C/D model) 18 8.24 Check Status 19 8.25 Check IMEI 19 8.26 Local time setting 19 8.27 Reset Hardware 20 8.28 Activate Fuel value in GPRS 20 8.29 TCP / UDP switch 20 8.30 SMS mode 20 8.31 Configure SMS monitoring center number 21 8.32 Configure GPRS heartbeat package interval 21 8.33 Initialization 21 9. Package contents 22 10. Cautions 22 11. Troubleshooting 23 , 1. Specifications Product name LTE wireless data terminal Model 405 DIM. 9.6×5.4×1.9cm Weight 70g Network GSM/GPRS/WCDMA/LTE Band 4G (B1/B2/B3/B4/B5/B7/B8/B28A/B28B/B40) 3G (B1/B2/B3/B5/B8) 2G (850/900/1800/1900Mhz) GPS sensitivity -165dBm GPS accuracy 5m Time To First Fix Cold status 45s Warm status 35s Hot status 1s Applicable car power 12V-24V Battery Chargeable 3.7V 90mAh Li-ion battery Storage Temp. -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing 2. Hardware Description 3. Terminal Installation 1.Please ask a qualified engineer to install it. 2.The installation environment should ensure that the GSM and GPS signals are good 3.Please do not install it in a dusty and humid environment. 4.Find the 14PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: 5.The pink wire can be connected to the original car alarm horn or the alarm horn purchased together. 6.Understand that the vehicle door trigger type is positive trigger or negative trigger. Connected to the green wire if it is positive trigger, and connected to the blue wire if it is negative trigger. 7.Please install the SOS button where the driver can touch it. 8.SIM card installation Open sealed buckle of sim card, insert the simcard , then ,Put sealed buckle back. Please be sure to confirm that the SIM card network frequency band is the network frequency band supported by the device. Caller ID must be turned on and the PIN code must be turned off. The call forwarding function cannot be turned on.

Minimum Order: 1 bags

The latest generation of IEC AC charging piles supports charging power of up to 22KW and has an electronic display that dynamically shows charging efficiency. The charging piles are equipped with the ocpp platform which provides customers with online access to the charging status via WIFI and bluetooth modules. Types of AC Type 2 Charger 7KW Type2 AC Charger 11KW Type2 AC Charger 22KW Type2 AC Charger Type 2 AC Charger for EV Features  1. Worry-free charging  2. Flexible charging methods  3. Built-in protection module 1 Worry-free charging With up to 22KW of charging power, type 2 home car charger can meet your daily charging requirements. Type 2 AC Charger for EV Features How To Use Type 2 AC Charging Are you prepared to set up an AC Type 2 Charger at your residence? To learn more, refer to the checklist and section below. Required electrical outlet Correct plug type Correct amperage setting Cable length from the type 2 charger to the car port The AC electric car type 2 charger plugs into a 240v outlet with a NEMA 6-50 connector, a three-prong outlet which many garages already have. An AC Type 2 Charger, which is non-networked and doesn't need activation if you already have a 240v outlet, can be used right away because it draws electricity like any other appliance in your house. If you do not have an existing 240v outlet where you want to plug-in and charge your EV, we recommend you hire an electrician to install a 240v outlet or hardwire the unit when installing your AC Type 2 Charger at home. For the greatest degree of flexibility in positioning your charging station to the electric car, all charge devices come with an 18- or 25-foot charging cable. To enhance your home charging experience, additional cable management accessories like the EV Cable Retractor offer even more customization and convenience. Now the level 1 charging station cost is reasonable, if you have needs to buy level one car charger, please contact us. If you are looking for a reliable ev home charger company, please choose us, and we will be your best partner.

Minimum Order: 1 bags

How to Measure PTO Shaft Types and PTO Yoke Replacement When purchasing a new PTO yoke, you must measure your tractor's PTO shaft to ensure that the new part fits properly. Measure the shaft length from the outer end of each yoke, and compare the length to the horsepower rating of your tractor. Then, choose the proper PTO series size based on the measurements. PTO shafts come in several different shapes. Domestic PTOs usually have square/rectangle/hex/splined tubing, while metric PTOs have star or bell- shaped shafting. In order to choose the correct PTO shaft, make sure to measure the diameter of the bearing as well as the inside diameter of the yoke ears. Then, match the measurement to the appropriate cross and bearing identification chart. A power take-off (PTO) yoke is a pivotal part of the PTO. It allows the tractor to transfer power to the attached implement. It is available in both internal and external models. There are also several different types of yokes. One of the most common types is a Spring-Lock yoke, which uses a spring-loaded collar, and the other is a Quick Disconnect (QD) yoke. Keeping the yoke and shaft lubricated is critical. You should apply grease to the shaft and yoke lock pin at least once a year. This will help prevent excessive wear and tear on the parts. Moreover, you should avoid excessive angles when operating a PTO. The PTO is a common piece of equipment used for farming and other purposes. Designed to transfer mechanical power from a tractor to other pieces of equipment, it also allows tractor operators to control the speed and direction of the machinery. If the PTO is used incorrectly, a tractor can be damaged. Independent PTOs are also available. These PTOs can be engaged while the tractor is running or stopped. They are activated by a push-button or selector switch. They can be engaged while the tractor is running or stopped, which increases safety for the tractor operator. A push-button or selector switch allows the operator to control the PTO with ease.

Minimum Order: 50

Charger-Union including AC Chargers and DC Chargers. IEC AC Chargers comply with IEC61851-1 standard, AC Chargers can be applied for household or commercial scenes, and DC Chargers are suitable for industrial charging scenarios. Types of IEC Charger Type 2 AC Charger The IEC AC charger has a simple design and a compact dimension. Both wall- mounting and standing options are available to save you space. 7KW Type2 AC Charger 11KW Type2 AC Charger 22KW Type2 AC Charger CCS2 DC Charger The IEC DC charger provides a high-power charging ,and its efficiency is up to 95% to achieve fast charging and save your charging time. 60KW CCS2 DC Charger 120KW CCS2 DC Charger 180KW CCS2 DC Charger IEC EV Charger Advantages The IEC ev ac charger has RCD function, which can detect the residual current of the product and provide leakage protection. Up to IP55 protection level, which can better protection to users and prolong the life spand of the car charger for electric car. The IEC DC charger is stylished designed and adopted the patented technology with the all-aluminum Z-shaped shutter, which can dissipate heat better, and be well painted in line with different branding. ALL CHARGE-UNI car EV charger are capable of supporting online status diagnosis, and realize remote upgrade through OTA. The dual charging cables achieve equal distribution of power and the efficiency is up to 95%, which maximizes the charging efficiency and saves your time. IEC EV Charger China FAQ  Does IEC EV charger support WIFI connection?  EV AC chargers support WIFI connection and you can also chose LAN connection. What are the supported modes of IEC EV DC charger?  DC charger supports CCS2 and CHAdeMO mode. How can IEC EV charger upgrade?  It can diagnosis online and realize OTA remote upgrade. We can offer kinds of car charger for electric car for sale, if you have needs to buy electric car charger, please contact us.

Minimum Order: 1 bags

Charge Uni IEC standard DC charging piles can reach up to 180KW to meet different scenarios; at the same time, our GBT DC chargers are adaptable to various harsh environments by their excellent design and protection performance. Types of GB/T DC Level 3 Electric Vehicle Charger for Sale 30KW GB/T DC Charger 60KW GB/T DC Charger 120KW GB/T DC Charger 180KW GB/T DC Charger  GB/T Variable DC Charger Features  1. Powerful performance  2. Safety  3. Intelligent networking 1 Powerful performance With a maximum efficiency of up to 95.5%, business operation efficiency can be further enhanced. GB/T EV Chargers DC Features GB/T DC Level 3 EV Home Charger Using Tips and Knowledge 1) Before charging, please confirm that the charging port is free from water stains, foreign objects, and the power cord is not damaged. 2) It is forbidden to pull out the charging plug during the charging process. 3) In non-emergency abnormal situations, it is forbidden to touch the "emergency stop" button . 4) When the ambient temperature is lower than 0℃, the charging time of the level 3 car charger for home is longer than usual. As a reliable ev charger factory, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags

Charge-Uni AC and DC products comply with the GB/T 18487.1-2015 standard. The AC Charger comes with compact size and simple design, and customers can choose wall-mounted or stand-pillar installation. The DC charger has a power of up to 180 kW, which further reduces charging time and improves overall charging efficiency. Types of GBT EV Charger GB/T EV AC Charger GB/T AC chargers adopt AC fast charging technology, with high current output to achieve more efficient charging. GB/T EV DC Charger The GB/T DC charger is designed with a double-protected air inlet to withstand the harsh environment. GB/T EV Charger Drawing Model Model Number F1 Rated Power 30kW 40kW Input Parameters Input Voltage AC323V~ AC437V Input Current 657A ≤79A Output Parameters Output Voltage DC200V ~ 750V Output Current 80A Basic Features BMS Auxiliary Source Standard 12V (24V can be customized) Peak Efficiency 295% Start Mode QR code, RFID (optional), VIN (optional) HMI 7-inch touch LCD Connectivity Ethernet/4G (optional) Cable Length 5m Dimension(W*D*H) 600mmx200mmx750mm Gross Weight 65kg Installation Method Wall-mounted; Floor - standing (optional bracket) Protection IP54 Environmental -30-50C (50-65 power derating); 5%-95% (no condensation) Altitude 2000m (2000-4000m power derating) GB/T EV Charger Advantages GB/T AC/DC products have a charging data management function to ensure the integrity and security of the customer's charging data. The product's emergency stop button is designed to cut off the power supply from the power circuit in case of emergency to prevent the failure. CU products are all supported by credit cards, WeChat, Alipay, and other activation mode. Difference between AC and DC GBT Charger As the electric system of an EV is a DC system, the AC power is not able to charge the power battery directly during AC charging, it needs to pass through a component called On-board Charger (OBC), which performs AC to DC conversion and is then supplied to the power battery after the voltage is transformed according to the command of the BMS. In the case of DC charging, the DC pile itself is an AC/DC rectifier and DC/DC transformer, which can be converted from AC to DC directly outside the vehicle according to the needs of the BMS, replacing the role of the on-board charger, hence the DC pile is also known as a non-on-board charger. GB/T Charger Characteristics Charging interface is a "nine-hole" design, the picture shows the DC charging gun head. The top middle CC1 and CC2 are used for electrical connection confirmation, while S+ and S- are the communication lines between the off-board charger and the electric vehicle. The two largest holes, DC+ and DC-, are used for charging the battery pack and are high current lines; A+ and A- are connected to the off-board charger and provide low voltage auxiliary power for the electric vehicle, with earth at the very center. GB/T EV Charger FAQ  What is the charging efficiency of GB/T AC and EV Chargers DC?  The charging efficiency of GB/T AC reaches 95%, and the charging efficiency of DC products reaches up to 96%. What is unique feature about GB/T EV CHARGER?  Our GB/T EV charger has high protection degree, low noise design and better environmental adaptability. As a reliable ev car charger supplier, we will do our best to meet all the needs of customers.

Minimum Order: 1 bags