Offers to Sell

This reinforcement welded wire mesh panels are made of ribbed steel bars bonded via spot welding for slab and wall constructions. The ribbed steel rod used can improve bonding to the concrete and minimize any concrete cracking that may occur as a result of concrete shrinkage. This feature enables the ribbed steel weld mesh widely used as building materials for block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. In practical uses, it is commonly used with bar chairs as supports. Materials and Types: Ribbed steel bar mesh can be divided into three types according to materials: Hot dipped galvanized, electro galvanized or stainless steel. It can be divided into two types according to steel bar sizes used: heavy type (diameter of bar or rod 12mm minimum) and light type (diameter of rebar rods from 3mm up to 10mm). Ribbed steel welded mesh can be divided into square hole and rectangular hole according to the opening types. The popular panel size of this reinforcing mesh is 6m length ×2.4m width. It comes in a variety of bar thickness and the internal square or rectangular sizes. Common square mesh are either 200×200mm or 100×100mm.

Welded Reinforcement Mesh for Construction Welded Reinforcement Mesh (for construction) is regularly used for concrete slab construction, such as roadways, in curved structures such as in domes and as bonding fabric for gunite. The cost, time and labor savings of welded wire fabric reinforcing offers an advantage over traditional tied rebar. Welded Reinforcement Mesh can be classified into four major types: 1. Rectangular Welded Mesh with wires crossed in a form of a rectangle, and longitudinal wire as the supporting one; 2. Square opening welded steel mesh with wires crossed in a form of a square, and both longitudinal and transversal wires as supporting ones; 3. Welded Wire Mesh for vertical wall building; 4. Special type.

Deformed steel bar for concrete reinforcement is also called ribbed steel bar. This kind of steel bar usually has vertical rib and transverse rib on surface, the form of vertical rib including spiral, and crescent and herringbone. Sizes is usually described in millimeter. Bar Diameter: 6MM-45MM Steel Bar Length: 6M, 9M, 12M Packing: Bundle Packing Usage: This kind of steel bar mainly takes drawing stress together with concrete. Because of ribs effects it can take the power from outside. This Deformed steel bar is widely used for all kinds of building structure. Especially man-sized, heavy-duty and high building structure.

Reinforcing steel bars are used for reinforcement of concrete structures, manufacture of anchor bolts, etc. Reinforcing bars (rebars) can be either smooth or deformed. They are produced by hot rolling process with subsequent superficial hardening by heat treatment. Deformed Reinforcing Steel Bar For Construction Quality: ASTM A615 Gr40-60, BS4449:97 Grade 460B, DIN488 BST 500S, CA-50 Size:8-32mm. Length: 6-12m. Packaging: 2 MT bundles. Upon request, we can load 11,80m once-folded into 20 DC container.

We are successfully meeting the varied needs of our clients by offering a wide gamut of Polypropylene Hollow sheets as per their precise needs. Features: It has high impact protection for tile protection and box manufacturer. It has chemical resistant and waterproof. It is Reusable multiple times. Its Competitive pricing backed up with a guarantee Branded and manufactured in Rajkot (India) for consistent quality. It can be easily cut to any shape, bent around surfaces, etc. Available in standard or fire retardant to grade. Available in Ultraviolet treatment and Anti-aging. Available in Corona treatment Plastic Corrugated Polypropylene Sheet for conversion into signage, Packaging, Display, surface protection, and a multitude of other Industrial applications. Other Details: Resistant against cracks Chemical resistance Leakproof Eco-friendly, non-toxic, recyclable. Water-proof, moisture-proof, dust-proof. Clean and maintained easily

Minimum Order: 1 bags

Product Description Knitted Jacquard Nylon Spandex Sports Clothing Fabric 140D+40D 200gsm 150cm Quick-dry Product Description It is made of 140D Nylon filament yarn and 40D spandex yarn. Composition is 75%nylon 25%spandex .Except the high stretch and cool touching feature, a big selling point for this fabric is the jacquard style. It is . It is high stretch and touches heavy. It is widely welcomed as sports clothing Fabric ,yoga pant fabric , Sports Clothing Fabric , etc. It is 75%nylon 25%spandex Sports Clothing . The percentage of spandex yarn is as high as 25% . So it is high stretch and you will feel comfortable when do sports. It is 200gsm and touches heavy. T his fabric also give you a different visual shock for its geometrical jacquard style. . It will bring you to a new world for Sports Clothing . It is mostly sold well as a Breathable Sports Fabric , sports clothing Fabric ,yoga pant fabric Sports Clothing Fabric, etc. Product Name Knitted Jacquard Nylon Spandex Sports Clothing Fabric 140D+40D 200gsm 150cm Quick-dry Width 150cm Weight 200GSM Specifications 140D+40D characteristic breathable and stretch Selling Point Jacquard +Quick-dry Style Jacquard application sports clothing Fabric ,yoga pant fabric , sports wear fabric Place of Origin Jiangsu China Delivery 15 to 20 days after sample comfirmation Sample picture 200GSM Jacquard Sports Clothing Fabric 140D 40D 75% Sport Nylon Fabric 150cm 0200GSM Jacquard Sports Clothing Fabric 140D 40D 75% Sport Nylon Fabric 150cm 1 Company profile Year of Establishment : 2008 Company Type: Manufacturer / factory Main product: mainly fabric in poly, nylon, cotton, woolen , spandex, printing, coated , bonded quality etc for sportswear, casual wear, out wear, out door and others Number of employees:101 - 200 Workshop Area:15000 m2 Qty of weaving machine : 100 Annual output:8 million metersAnnual Revenue:US$8 Million - US$13 Millio Main Market: EU, US, South Africa, South east Asia, Middle east

Debris Netting for Scaffold Safety, Wind Breaking and Shading Scaffold is very important devices in constructions requiring safety protection for both its workers and the people around the scoffold. Scaffold debris netting can be knit polyester, high density polyethylene, polypropylene, PVC- coated polyester, or knitted polyethylene fabrics. Also known as Scaffolding Net, Debris Scaffold Netting, Scaffold Safety Netting. Debris scaffold netting is foldable, air flowing, shading, low cost and has a wide application in construction, bird control and agriculture netting uses. Available in green, black or other colors. Rolls sizes in 1.2m x 50m, 2m x 50m, 3m x 50m. Scaffold Debris Netting, HDPE Fabric, 75gsm, in White Color HDPE mesh debris scaffold safety netting Scaffolding debris mesh nets, in rolls 3x50m. Fabric Type – HDPE mono filament Color: White color Fabric weight – 75 g/m² Tensile strength – 245 N/5cm Tear resistance – 50 N Temperature resistance – -40/+80 °C Wind-force coefficient Parallel – Cfy 0,17 Finished size, +/- 2% Finishing – with knitted buttonholes Buttonholes – 5 cm interval Tear resistance buttonholes – 180 N

Minimum Order: 1 bags

HDPE and Fiberglass Monofilament Netting for Construction Safety. Heavy Mesh Density ≥800head/100cm2, tensile strength approx.550 N/5 cm. Coated chemical fiber or polyester monofilament is commonly used in building construction as Debris Netting and Scaffolding Enclosure. The monofilament is mostly HDPE (nylon), pp or fiber glass as primary materials. Available in black, white or green. Construction nets create a protection barrier enclosure for both workers and individuals around the building site, as well as for properties around the work site. Four Popular Types: 1. Light Type Debris Netting: Light weight knit polyester mesh to entrap small debris. Custom made to any size and colors. 2. Medium Type Debris Netting: Designed for catching small or light debris containment. Durable and reusable mesh fabrics with a range of mesh sizes for options. Design load rating : 2000 lbs. 3. Heavy Type Fine Mesh Scaffolding Enclosure & Debris Protection

Minimum Order: 1 bags

Fine Mesh Debris Safety Netting with its installation surface not perpedicular to the horizontal plane is called horizontal netting or flat netting. It is a durable mesh fabric designed to prevent people and objects falling, or to avoid and reduce physical injury of such fallings. Horizontal safety netting is mainly used to catch falling persons and objects in construction of buildings. This heavy type debris netting is knitted in a strong high density polyethylene (HDPE) or a flexible polypropylene (PP). Debris Safety Net can include both horizontal scaffolding sun/wind blocking netting and vertical debris netting to create a barrier system for the construction site safety and for improved productivity with less cleaning up time. 3, 6 and 9 Needle Knitted types available. Fine Mesh Debris Netting, supplied with eyelets on all sides for fastening to structure. High Density Polyethylene Mesh Debris Fabric Installed for Horizontal Plane Construction Safety: Debris netting used as Horizontal Safety Net has a fine high dense opening of maximum 2000 mesh per 100 square centimeter while common vertical safety netting (max. 800 opening per 100 square centimeter). The high density mesh allows it to prevent articles with bottom area under 100 square centimeter and offers better safety features. Secondly, horizontal netting is knitted with very special method, with firm knots, uniform openings and sizes. It is firm, tough, durable and economic. Thirdly, this products offers good air permeability, can be closed for working and keep the constructional site nice and clean. Fourthly, The durable HDPE or chemical fiber materials are fire retardant.

Minimum Order: 1 bags

Vertical Debris Safety Netting With Liners, Rings and Selvages for High Building Construction Scaffolding Barrier In the construction of tall buildings, vertical wire mesh for safety is used to circle the scaffolding firmly fixed. Mostly made of HDPE Knit Mesh or nylon rope netting, vertical debris netting is installed at 90 degree angle against the horizontal line. Designed to prevent the construction materials or workers to fall down from higher places. Features: High strength, good elasticity, easy installation, non-pollution. It is environmental-friendly, soft, anti-aging, corrosion resistant, worm resistant, cold resistant, etc. Green HDPE Construction Net with Good Air Flow while Keeping Dust Away. To ensure a good ventilate, clean and safety construction environment. Material: HDPE,Nylon,PE Standard: any size are available for width below 6m; Color: green ,dark green ,blue ,orange, white,etc. Package:in rolls or in pieces; Weight:according to request .

Minimum Order: 1 bags

HDPE Debris Netting, High Mesh Density, Flame Retardant Lightweight debris nets are manufactured from high density polyethylene ( simplified as HDPE, or PE) monofilaments. HDHigh Density Polyethylene Mesh Safety NettingPE netting with high density mesh is ideal for indoor and outdoor fencing application. The newly improved webbing has extra reinforced border, and eyelets at close intervals, perfect for open sided building and scaffold use. Cost effective debris netting mesh has reinforced edges at side and middle for great strength. Specifications Material: knitted knotless virgin HDPE. Length: 50m-100m or as required. Width: 2m-10m or as required. Weight:100g-300g / square meters or as required. Contains reinforced edges at side and middle. Easy to install, Economic and secure solution. Treated with UV: ensure the nets keep long lifespan.

Minimum Order: 1 bags

Fire Retardant Debris Net, Warp Knitted HDPE Fabric Used as Scaffolding Enclosure & Debris Protection Barrier, Supplied in various rolls sizes and colors. Debris net, used for construction safety netting, is manufactured from high density polyethylene monofilaments treated with excellent flame retarding property. Comparing Debris Netting Used for Horizontal Safety and Vertical Safety in Construction: In the construction of buildings, horizontal safety netting is installed around the building site to form a circle, in order to prevent the construction materials or workers to fall down from higher places. When used as horizontal safety netting, the debris netting is installed at an angle of Non-Perpedicular to Horizontal Plane. Popular mesh materials applied are Heavy Type HDPE Knitted Fine Mesh Fabrics with excellent strength. Horizontal Safety Debris Netting is mainly designed to prevent the people or articles from falling down, or to avoid possible harms caused by falling articles and to protect the workers in high places and the passing pedestrians, also to keep the construction site safe and clean. Safety Debris Netting for Vertical Construction in Projects: Debris netting used as vertical safety netting can be light type or medium type debris netting. Mainly used to prevent falling from scaffolding. The netting is installed at 90 angle degree against the horizontal line. Technical requirements for vetical safety netting is not so strict compared with horizontal ones.

Minimum Order: 1 bags

Gabions Welded for Construction of Military Fortification Barrier - Anti Blast Defence Gabion Walls - Flood Control Wall Welded Mesh Gabions with strong mesh panels and heavy zinc corrosion protection are ideal material for military defending wall and security barriers. Wire Material for Military Barrier: Hot-dipped galvanized wire, Hot-dipped galvanized wire with PVC coated, Zn-10%-Al wire, Zn-5%-Al wire. Military Cells Structure: The gabion barrier is assembled with collapsible wire mesh cages and heavy duty fabric liners. The cover panels, side panels and bottom panels are produced separately, then assembled to a basket secured with lacing wire or hog rings. Selvedge wire used to increase the strength of the mesh baskets by reinforcing the welded mesh panels are thicker wire than the mesh wire applied and stronger. Wire diameter range:3.0-6.0mm Spring selvedge wire Diameter:4.0mm Gabion Mesh opening: 50*50mm,75*75mm, 76.2*76.2mm,100*100mm, more. Geotextile: Heavy duty non-woven polypropylene, in colors sand color, biege color, military Green. Application: Military defense Perimeter security barrier Command post, observation points and border checkpoints Military barrier fortification system Equipment revetment Explosives and contraband search areas Anti blast defence walls Protecting structures Defensive Firing Positions Flood contro retaining wall Gabion Barriers Features: 1. Economical. Just fill the stone or sand into the gabion containers and seal it. 2. Easy installation and quick finishing 3. Weather proof under natural destroy, corrosion resistant. 4. No collapse even under big pressure 5. Strong and solid structures 6. Good permeation can prevent the damage by hydrostatic. 7. Less transportation freight 8. Can be used with barbed wire

We supply the Hand brake valve ,Relay valve ,Foot brake valve , Trailer control valve, Four circuit protectione valve , unloader valve , leveling valve by superior quality with competitive price. Product name Foot Brake Valve ( Basic ) OEM NO. 277863 Vehicle applications Mack Brand name Meicely Material Aluminum alloy, Zinc alloyn Color Silver  Ports NPT 3/8" Exhaust Flap  Other OE No.  Car Model OE No. Foot Brake Valve 277863 286171 Foot Brake Valve 277863 4613152580 Foot Brake Valve 277863 4613152640