Offers to Sell

HEDUN Vertical Froth Pumps The pump head use double shell structure, the flow-parts use hard nickel, high chromium or rubber material, and its driving section is universal with SP(R) type pump. Hopper charging box use steel plate structure, liner plate can be covered if the conveying media required, and the pump outlet opening position can be interval changed by 45°. This series of froth pump can effectively eliminate the foams and bubbles out of the slurry during the operation. Even the feed-in material is not enough, the pump can still work normally. odel Power P（KW） Capacity Q(m³/h) HeadH(m) Speed n(r/min) Eff. % Inlet dia.(mm) Outlet dia.(mm) HDF2Q 3-15 6-43 6-30 800-1800 45 100 50 HDF3Q 3-18.5 23-78 5-28 700-1500 55 150 75 HDF4R 5.5-37 33-187 5-28 500-1050 55 150 100 HDF6S 15-75 80-393 5-25 250-680 55 200 150 HDF8S 37-110 126-575 5-26 350-650 55 250 200 Application Specially for delivering the frothy slurry of abrasion in flotation process in mines, metallurgy, chemical process, coal industries, etc The Vertical Froth pump is suitable for: The Vertical Froth Pump is ideal for all applications involving handling of air entrained slurry, such as flotation froth in base metal concentrators, phosphate and apatite washing plants and calcium carbonate upgrading plants The pump can be used as a mixing and distribution unit, where dry powder has to be mixed (and wetted) with water. Application field: Iron Ore Dressing Plant Copper Concentration Plant Gold Mine Concentration Plant Molybdenum Concentration Plant Potash Fertilizer Plant Mineral Processing Plants

Minimum Order: 1 bags

Hedun Submersible Slurry Pump HDQ series slurry pump is a kind of submersible slurry pump. The coaxial electric motor and pump submerged together into water to work. The wear part of this series pumps are made of high wear abrasive chrome alloy. HDQ seres submersible slurry pump is mainly made of three parts: pump head, electric motor, and sealing parts. The hydraulic part adopt advanced design way. The pump’s preposition agitator impeller can spray sedimentary and warp into high concentration slurry. The unique sealing device can effectively balance the oil inside and outside to protect mechanical seal reliability, the electric motor adopt protection device, for example, overheating protection testing, water detection protection etc to guarantee working well in worse working conditions for long term. Hedun Industrial Sump Pumps Advantage 1.The coaxial electric motor and pump submerged into water to work. 2.preposition agitator impeller can spray sedimentary and warp into high concentration slurry 3.High abrasive resistance high chrome alloy wear parts 4.Wide channel, big flow capacity to allow bigger particles pass. 5.Special sealing device can protect mechanical sealing stable to prevent high pressure water and impurity. 6.Electric motor with overheating protection testing, water detection protection etc. 7.Clean the slurry completely because of electric motor and pump submerged itno water to work without suction head limit. Application Industry Used for metallurgy, chemical, mine, coal, power, building, civil environment protection and river dredging for transfering sand and gravel, coal slag and tailings slurry with abrasive solid particles. Usage of HDQ seres submersible slurry pump 1.Dredging for river, lake, artificial lake, port. 2.Suction sand in river, lake and sea. 3.Discharging sedimental and mud slurry 4.Drainage in civil pipeline and rainwater pumping station 5.Cleaning steel mill and ore treatment plant settling pond, power plant’s sediment coal pool and pollution water treatment plant oxidation ditch sediment pool. 6.Transferring water and slag slurry in steel and iron mill. 7.Transferring tailings and slag pulp in concentrating mill. 8.Cleaning slime and slurry in coal mine 9.Transferring coal fly ash, slime and coal slurry 10.Absorbing all kinds of carborundum, silica sand and steel slag solid particles. 11.Gold sand dredging, iron sand suction and mineral processing 12.Transfer slurry with all kinds of impurity 13.Transfer slurry with more bigger solid particles Alias: Submersible pumping sand pump, submersible suction sand pump, submersible mud and sand pump, submersible slurry pump. Usage Environment 1.Electric motor: 50HZ/60HZ, 3Phase, 380 V, AC 2.The media max. temperature 60℃, without flammable and combustible gas. 3.Slurry max. concentration: Ash slurry 45%, slag slurry 60% 4.Submersible depth: Max. 20m, Min.1m 5.By vertical way to work, the continuous working status.

Minimum Order: 1 bags

HDSP Series Sump Slurry Pump, Vertical Sump Pump The HDSP/SPR heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Optional recessed impeller and suction agitator available. The rugged HDSP/SPR Heavy Duty Sump Pumps are available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in: • Minerals processing • Coal preparation • Chemical processing • Effluent handling • Sand and gravel and almost every other tank, pit or hole-in-the-ground slurry handling situation. Performance The Hedun Vertical Slurry pump are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters.. We supply OEM Vertical Slurry pump Our website: https://www.topslurrypump.com/product- , hdsp-series-sump-slurry-pump.html

Minimum Order: 1 bags

Hedun Horizontal Gravel Pump Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. They are designed to handle very large particles for gravel and dredging operations, could continuously handle the most difficult higher abrasive slurry, containing solids too large to be pumped by a standard slurry pump. Main Components in the Drawing 003 Base 131 Bowl 005 Bearing Assembly 137 Impeller 132 Intake Joint 041 Back Liner 132 Discharge Joint 135 Door Clamp Ring 130 Discharge Flange 134 Adapter Plate Clamp Ring Intake Flange 124 Volute Cover Seal 013 Cover Plate 1) Cantilevered, horizontal, centrifugal, one stage, single casing 2) High head gravel pump, large capacity, high efficiency. 3) Good NPSH performance. 4) Application area is wide Hedun heavy duty gravel pump They are designed for handling more abrasive with solids slurry in the river dredging, dewatering, Sand reclamation, Sugar beet , explosive sludge in metal melting, grudging in dredger etc. 5) Long bearing life: The bearing assembly is with large diameter shaft and short overhang. 6) Wear resistant wet parts: The wet parts are made of high chromium abrasion resistance alloys. (more than 26% Chrome alloy). 7) The frame plate for pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber which ensure good performance of the gravel pump. 8) Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing. 9) Wide choice for packing way: Centrifugal seal, mechanical seal and packing seal are available. 10) The shaft seals could be adoptable of gland seal or expeller seal 11)The Hedun gravel pump discharge can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Minimum Order: 1 bags

HDZJ High Efficient Slurry Pumps With the development of the technology, our company has introduced the series HDZJ slurry pump under the theory of modern fluid mechanics, based on the software design and practical experiences. The HDZJ series slurry pumps are designed as single- stage, single-suction centrifugal pumps. They are classified into the horizontal type (HDZJ type) and vertical type (HDZJL type) according to construction. The pumps are innovative in both hydraulic and structural design. The wet parts are made from high-chrome alloy with high wear-resistance. They are of energy- saving, high efficiency Horizontal Slurry pump , little vibration, low noise, long service, lightweight, reliable operation and easy maintenance. The Hedun slurry pumps are widely used in power plant, metallurgical, mining, coal, etc. which are suitable for handling abrasive and corrosive slurries with maximum concentrations of wt.45% (ash) and wt.60% (ore) such as the fine ore and tailings in mining, removing ash in power plant and delivering coal tailings. The pumps can be operated in series according to special requirements.

Minimum Order: 1 bags

In order to meet the requirements on the development of mining, the power plant, metallurgy and coal industries, our engineers have designed and developed Series HDZG(S) Generation Slurry Pump with large capacity, high head, multi-stages with experience of slurry pump design and manufacture for many years, and absorbing the research results of advanced technology from home and abroad. They are suitable to deliver slurry with high concentration with the high head. Note: Quantity range recommended:50%Q’≤Q≤100%Q’(Q’Appropriate to capacity at highest efficiency point).2.NPSH:appropriate to point Q recommended at highest speed.  We are slurry pump manufacturer Application of HDZG Slurry Pumps: It can be widely used for handling the mixture of abrasive and corrosive solids in power, metallurgy, coal, building materials, chemical industry departments, especially for removing ash and sludge in power plant. Click here to get slurry handling pump price

Minimum Order: 1 bags

HDH Series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high- density slurries. This series pump may also be installed in multistage series   The features of Hedun High head slurry pump: The frame plate liner and impeller for HDH Series Centrifugal slurry pump are made of wear-resistant metal. The shaft seals could adopt the Packing

Minimum Order: 1 bags

HDM Series slurry pump is mainly using for handing strong abrasive, high density slurry and low density, high head slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc.   The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for HDM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump applied cylindrical structure, adjusting the space between impeller and front liner easily, and removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. They have excellent performance, good NPSH and high efficiency. The pump of this type may be installed in multistage series to meet the delivery for long distance.   Main application of high efficiency Slurry pump   This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.   Typical Applications of Hedun pumps: 1) Mining slurry transfer in metallurgy concentrating mill 2) Ash handling in thermal power plant, 3) Coal slurry transfer in coal washing plant 4) Separate sand from sea water 5) Dredging sand and mud in river, sea and lake 6) Transfer corrosive slurry in chemical industry 7) Coal washery and iron tailing industry 8) Gold and copper mining 9) Transfer slurry with big particles 10) Cleaning setting pond in steel mill and ore treatment plants 11) Cleaning coal setting pond in Power plant 12) Transfer tailing slurry and slag in ore treatment plants 13) Transfer carborundum, silica sand and steel slag Go url to ger the high efficiency Slurry pump price   HDM Series Slurry Pump Performance Chart  Pump Model Allowable Max. Power(kw) Clear Water Performance capacity Q Head H(m) speed n(r/min) Max.eff. η% NPSH  (m) Impeller Dia(mm) m3/h l/s HDM-8E 120 540-1440 150-400 14-60 600-1000 73 4-10 549 HDM-8R 300  Note: 1.Quantity range recommended:50%Q’≤Q≤100%Q’(Q’Appropriate to capacity at highest efficiency point).2.NPSH: appropriate to point Q recommended at highest speed. 

Minimum Order: 1 bags

HDL Light duty series slurry pumps is suitable to transport low-abrasion and low concentration slurry in the metallurgical, mining industry and building material industry. This slurry pumping equipment offers many advantages specially for using in watery or other liquid-filled environments. With a more laconic structure, this pump requires much smaller space. Its shaft seal adopts both packing seal and centrifugal seal. In most conditions, centrifugal seal can work well and there is no necessity for seal water. If packing seal is adopted, the device should be attached with low or full-flow seal flushing device. Meanwhile, the Metal Light Duty Slurry Pump casing of this slurry handling equipments is padded with replaceable metal liners which are highly resistant for abrasion. The impeller is made of anti-abrasion metals or abrasive rubber. That is why it enjoys a much longer service lifespan. The frame plates of HDL Series Hedun Centrifugal slurry pump have changeable, wear-resistant metal liners or rubber liners upon request and the impellers are made of wear-resistant metal or rubber. And the discharge branch can be oriented to any of the eight different positions for installation and application upon request. The shaft seals could adopt the Packing

Minimum Order: 1 bags

Rubber lined centrifugal ash slurry pump metal liner mine dewatering pumps HDR Rubber Lined Slurry Pumps The HDR series slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurry. The pumps of this series can be installed in multistage series.   The features of this kind of Hedun slurry pump   The impellers of this kind of slurry pump are made of rubber. The frame plates for this kind of slurry pump have replaceable wear-resistant rubber liners. The discharge branch can be oriented to any of the eight different positions. The shaft seals of this kind of slurry pump may adopt shaft gland seal or expeller seal. 1.Frame Plate  2.Expeller Ring 3.Packing Gland  4.Shaft Sleeve 5.Expeller 6.Frame Plate Liner  7.Impeller  8.Cover Plate Liner  9.Cover Plate More information you can click here ump Model Allowable Max. Power(kw) Clear Water Performance capacity Q Head H(m) speed n(r/min) Max.eff. η% NPSH  (m) Impeller Dia(mm) m3/h l/s 1.5x1B-HDR 15 10.8-25.2 3-7 7-52 1400-3400 35 2-4　 213　 2x1.5B-HDR 15 25.2-54 7-15 5.5-41 1000-2600 50 2.5-5.5 178 3x2C-HDR 30 36-75.4 10-21 13-39 1300-2100 55　 2-4 213 4x3C-HDR 30 79.2-180 22-50 5-34.5 800-1800 59 3-5 245 4x3D-HDR 60 6x4D-HDR 60 144-324 40-90 12-45 800-1350 65 3-5 365 6x4E-HDR 120 8x6E-HDR 120 324-720 90-200 7-49 400-1000 65 5-10 510 8x6R-HDR 300 10x8ST-HDR 560 540-1188 150-330 12-50 400-750 75 4-12 686　 12x10ST-HDR 560 720-1620 200-450 7-45 300-650 80 2.5-7.5 762　 14x12ST-HDR 560 1152-2520 320-700 13-14 300-500 79 3-8 965 16x14TU-HDR 1200 1224-2754 340-765 9-43 250-450 82 3-8 1067  Note: Quantity range recommended:50%Q’≤Q≤100%Q’(Q’Appropriate to capacity at highest efficiency point).1.NPSH:appropriate to point Q recommended at highest speed. Advantage:   1. The wet parts for Hedun Rubber Lined Slurry pump are made of corrosion- resistant and abrasive rubber material.  2. Slurry pump's bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication .  3. The shaft seal could use the packing seal, expeller seal and mechanical seal.  4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.  5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices for the slurry pump.  6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance. Hedun Rubber Lined Slurry pump Application:   The type of HDR pumps are also used for handing strong abrasive, high density slurry and low density, high head slurry in the metallurgical, mining, coal, power, building material and other industrial departments etc. It is suitable for the corrosive slurry usually. In some ore dressing, some bigger HDR series pump also would be used to transport the fine ore or tailing with weak abrasion. 

Minimum Order: 1 bags

Slurry pumps are recommended for pumping liquids containing small or large suspended solids.They are designed for continuous pumping of highly abrasive and corrosive slurry. The excellent performance of slurry transportation depends by its special designed structure: 1. Liner 2. Frame Plate 3. Frame Plate Liner Insert 4. Cover Plate 5. Cover Plate Liner 6. Cover Plate Liner 7. Expeller ring 8. Shaft Sleeve 9. Expeller 10. Bearing Seal More information you can click here ump Model HDA Series Pumps ImpellerDia.(mm) AllowableMax.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. η% NPSH (m) m3/h l/s 1.5x1B-HDA 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 2x1.5B-HDA 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 3x2C-HDA 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 4x3C-HDA 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 4x3D-HDA 60 6x4D-HDA 60 162-360 45-100 12-56 800-1550 65 5-8 365 6x4E-HDA 120 8x6E-HDA 120 360-828 100-230 10-61 500-1140 72 2-9 510 8x6R-HDA 300 10x8ST-HDA 560 612-1368 170-380 11-61 400-850 71 4-10 686 12x10ST-HDA 560 936-1980 260-550 7-68 300-800 82 6 762 14x12ST-HDA 560 1260-2772 350-770 13-63 300-600 77 3-10 965 16x14TU-HDA 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 https://www.topslurrypump.com/product- , hda-heavy-slurry-pumps.html Remark: 1. Capacity range recommended: 50%Q'≤Q≤110%Q' (Q' Appropriate to capacity at highest efficiency point). 2. NPSH: appropriate to point Q recommended at highest speed Hedun-Metal Lined Slurry pump Typical Applications 1. Coal washing plants 2. Mining 3. Oil and gas 4. Sand and gravel plants 5. Dredging for mineral sands 6. Ash handling facilities attached to power stations

Minimum Order: 1 bags

Galao militar de metal / Galao para transporte de gasolina 5L American Type Jerry Can Capacity:5L Overall Size:29 x 12.5 x 23CM Net Weight:1.2KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.6mm Surface:Powder Coated Packing:1PC/BAG, 10PCS/CTN Gross/Net Weight:14/13KGS Carton Size:67 x 30 x 47CM ---------------------- 10L American Type Jerry Can Capacity:10L Overall Size:34.5 x 16.5 x 27.5CM Net Weight:2.5KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.8mm Surface:Powder Coated Packing:1PC/BAG, 8PCS/CTN Gross/Net Weight:21/20KGS Carton Size:69 x 35.5 x 56CM ---------------------- 20L American Type Jerry Can Capacity:20L Overall Size:34.5 x 16.5 x 46.5CM Net Weight:3.8KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.8mm Surface:Powder Coated Packing:1PC/BAG, 5PCS/CTN Gross/Net Weight:19/18KGS Carton Size:85 x 35.5 x 49CM

Minimum Order: 100

Galão reserva depósito de metal tipo militar para gasolina e combustível 5L American Type Jerry Can Capacity:5L Overall Size:29 x 12.5 x 23CM Net Weight:1.2KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.6mm Surface:Powder Coated Packing:1PC/BAG, 10PCS/CTN Gross/Net Weight:14/13KGS Carton Size:67 x 30 x 47CM ---------------------- 10L American Type Jerry Can Capacity:10L Overall Size:34.5 x 16.5 x 27.5CM Net Weight:2.5KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.8mm Surface:Powder Coated Packing:1PC/BAG, 8PCS/CTN Gross/Net Weight:21/20KGS Carton Size:69 x 35.5 x 56CM ---------------------- 20L American Type Jerry Can Capacity:20L Overall Size:34.5 x 16.5 x 46.5CM Net Weight:3.8KGS Material:Cold Rolled Plate ( DC04 ) Body Thickness:0.8mm Surface:Powder Coated Packing:1PC/BAG, 5PCS/CTN Gross/Net Weight:19/18KGS Carton Size:85 x 35.5 x 49CM

Minimum Order: 100

Galão bidão reservatório em alumínio para transporte e armazenamento de combustíveis e água 10L Aluminum Jerry Can Thickness:1.2mm Material:Aluminu , m ( 6063 ) Outlet Dia:50mm Surface:Oxidation Treatment Net Weight:1.0KGS Overall Size:31 x 13 x 38CM Packing:1PC/POLYBAG,10PCS/CARTON G/N Weight:11.2/10KGS Carton Size:68 x 64 x 39CM ------------------- 20L Aluminum Jerry Can Thickness:1.2mmdong Material:Alu , minum ( 6063 ) Outlet Dia:50mm Surface:Oxidation Treatment Net Weight:1.8KGS Overall Size:35 x 16 x 49CM Packing:1PC/POLYBAG, 5PCS/CARTON G/N Weight:10.2/9KGS Carton Size:84 x 36 x 50CM

Minimum Order: 100