Offers to Sell

Product Description Axial Expansion Joint The axial internal pressure type ripple compensator（TNY Axial Expansion Joint） is composed of a bellows and two-end connection pipes. The end connection pipe is directly welded to the pipeline, or the flange is welded and then connected to the pipeline flange. The tie rod on the compensator is mainly used for rigid support during transportation or for pre-deformation adjustment of the product. It is not a load-bearing part. This type of compensator is simple in structure and low in price, so it is preferred. The tie-down axial expansion joint consists of a single bellows element with an end connection and a tie rod system. Regardless of accessories such as liners and caps, this model can absorb all types of motion in any length of pipe, but is mainly used to absorb axial motion and a small amount of lateral motion. Common problems in choosing bellows compensator: Need to provide the manufacturer with working pressure, working temperature, size, medium, compensation amount, the use of working conditions environment, choose suitable conditions of the ripple compensator products.

Product Description The non-metallic compensator is composed of non-metallic skin, thermal insulation filler, diversion tube, pressure plate and metal structural parts. Also called non - metal flexible fabric compensator, non - metal expansion joint. It is a flexible connection used to release pipeline stress and seal gas medium. The function of non-metallic compensator: 1. Absorb the thermal expansion and contraction of the pipeline caused by the temperature difference; 2. The rigidity is low, the reverse thrust generated by the displacement is very small, and the strength requirements for the support and equipment are low; 3. Effectively isolate the vibration source equipment, prevent vibration transmission, avoid resonance, and reduce system noise; 4. The weight of the non-metallic compensator is lighter, and the larger diameter can be spliced on site. The non-metallic skin and metal components are mechanically connected. The non-metallic skin and insulation layer can be replaced easily and quickly on site, which can shorten the system downtime and reduce Maintenance costs.

Product Description The flexible fabric compensator is mainly composed of non-metallic loops, heat insulation materials and metal structural parts. The non-metallic loops are made of fiber fabric, silicone rubber, fluorine material and other flexible fabrics with good performance to be selected according to specific working conditions. The correct selection is essential to the safe use of flexible fabric compensation. Full consideration should be given to the use of flexible fabric compensator, displacement, interface conditions, etc., to determine the model, design pressure, temperature level, and interface of the fabric flexible compensator Dimensions, total product length and connection form. Fabric Expansion Joint According to the cross-section shape of the pipe, it can be divided into circular fabric compensator, rectangular fabric compensator and special-shaped fabric compensator. The fabric flexible compensator produced by Poitong, a non- metal compensator manufacturer, has the characteristics of good corrosion resistance, large displacement absorption, shock absorption and noise reduction, as well as convenient installation and maintenance.

Metal expansion joints are also called "metal corrugated compensators", which are composed of one or several bellows and metal components, which are used to absorb the dimensional changes of pipes and (or) equipment caused by thermal expansion and contraction. The role of Corrugated Expansion Joints: 1. Compensation for thermal displacement. Absorb the elongation or shortening displacement of the pipeline due to temperature changes, ensure the constant distance between the two fixed supports and release the temperature stress, so that the pipeline can operate safely. 2. Shock absorption and noise reduction. When the equipment vibrates, the expansion joint installed between the equipment and the pipeline is equivalent to a closed spring, which isolates the transmission of equipment vibration to the pipeline and reduces structural vibration and noise. 3. Protect the equipment. The installation of corrugated expansion joints at the inlet and outlet of equipment with strict requirements on forces can effectively reduce the force of the pipeline on the inlet and outlet of the equipment. 4. Improve the tightness of the flange connection. Effectively reduce the stress of flange connecting bolts and improve sealing performance.

Product Description Five elements for the selection of stainless steel metal hose: 1. Size: Nominal diameter of hose, joint type and size, hose length. 2. Pressure The actual working pressure of the hose. 3. Medium Enter the chemical properties of the medium. 4. Temperature The working temperature and range of the medium in the hose; the ambient temperature when the hose is working. At high temperatures, the maximum allowable pressure at the working temperature needs to be determined according to the temperature correction coefficient, and the correct pressure level has been determined to be selected. 5. Condition According to the condition of the hose when it is used, refer to the correct installation method of the hose, the calculation of the length of the hose in various motion states and the minimum bending radius of the hose, etc., select the hose length normally and install it correctly. In the selection of stainless steel metal hose, can choose one end of the loose flange connection mode.For the welded stainless steel metal hose, attention should be paid to protecting the surface of the metal hose during welding to avoid damage to the stainless steel metal hose caused by welding slag and arc ignition.The stainless steel metal hose shall be kept horizontal during installation and shall not be twisted.Do not have bends or dead bends.After the hydraulic test, should prevent the impact of rust block, sediment containing chloride ions deposition, resulting in corrosion and damage.

PHILIPS 55 inch Led Backlight Strip K55WDC2 for 55'' LCD TV Repair Parts kits Products Detail Item type PHILIPS 55 inch K55WDC2 tv backlight Original code    4708-K55WDC-A2113N01 Pcb Matetial Aluminum Size 545mm LED Source 3030/3535 TV backlight lens Original lens from Korea One complete set 8PCS/SET Package Packing with tray, Export carton Warranty 1 year, if any problem, refund full Are you looking for plenty of Philips TV Backlights for your TV? Browse through the wide range of the best backlights for Philips TVs to find the one that's right for you! More durable than the original (copper based) backlight in addition to the premium brand. You can also find great discounts when buying Philips TV backlights during the big sale.

49 inch 4 LED 49UJ 6300 6916L-1315A Led Backlight Strip kits Products Detail 1. 1:1 as original connectors 2. Original Korea lens 3. 1 OZ Aluminum PCB with V wear exposure technology 4. The lamp is 3V, power 1W, use 3030 EMC bracket 5. Original code:   NC490DGG-AAFX1-41CA GAN01-1256A-P1 NC490DGG-AAFX1-41CA GAN01-1255A-P1 1315A, 1316A, 49INCH LED ARRAY_A-Type_161212 6. Quality warranty is 1 year, we refund fully there's any problem with the led strip lights. LG TV Backlight buying tips: If you are replacing an LED in an LG TV, it is recommended that you install the latest TV software after installation to minimise the risk of repeated LED failures. On Smart TV models, update the software from the settings menu. For non-smart TV models, visit the LG TV Support website for software update instructions. Many TV models use a variety of different LED strips. Please match the strip shown in the photo to the original in the TV before ordering.

LB-PF3528-GJD2P5C435X10-H Led Backlight Replacement kits for AOC 43 inch LCD TV Products Detail : 1. AOC TV Backlight Strips 1:1 as original connectors 2. Original Korea lens 3. 1 OZ Aluminum PCB with V wear exposure technology 4. The lamp is 3V, power 1W, use 3030 EMC bracket 5. Original code:   GJ-2K15-430-D510 GJ-2K16-430-D510- , V4 LB-PF3528-GJD2P5C435X10-H LB-PF3528-GJD2P , 5C435X10-B EVERTOP LBM420P1001-DM-2 6. Quality warranty is 1 year, we refund fully there's any problem with the led strip lights. Part Number GJ-2K15-430-D510 GJ-2K16-430-D510-V4 LB-PF35 , 28-GJD2P5C435X10-H LB-PF3528-GJD2P5C435X10-B EVERTOP LBM420P1001-DM-2 Board Number 1 LB-PF3528-GJD2P5C435X10-H LB-PF3528-GJD2P5C435X , 10-B EVERTOP LBM420P1001-DM-2 Board Number 1 LB-PF3528-GJD2P5C435X10-H LB-PF3528-GJD2P5C435X , 10-B EVERTOP LBM420P1001-DM-2

SAMSUNG 39FH BN96-28764A BN96-29032A LED Backlight Strips for LCD TV 1.Item type: Samsung 39FH Led tv backlight 2.Original code: LUMENS D3GE-390SMA-R2 13.07.10 LUMENS D3GE-390SMB-R2 13.07.10 AMSUNG_2013SVS39_T2_3228N1_B2_12_REV1. , 7_131015 SAMSUNG_2013SVS39_T1_3228N1_B2_13_REV1 , .7_131015 3.Pcb Matetial: Aluminum 4.LED Source: 3030/3535 5.One complete set: 3pieces/SET Samsung TV Backlight Strip Products Detail Part Number BN96-28764A,BN96-28765A BN96-29032A,BN96-29033A , Board Number 1  CY-DF390BGMV1H Board Number 1 LUMENS D3GE-390SMA-R2 13.07.10  LUMENS D3GE-390SMB-R2 13.07.10 SAMSUNG_2013SVS39_T2_3228N1_B2_12_REV1 , .7_131015 SAMSUNG_2013SVS39_T1_3228N1_B2_13_REV , 1.7_131015

LG 47LN 6916L-1174A Led Backlight Replacement kits for LG 47 inch LCD TV Products Detail 1. 47LN Led tv backlight 1:1 as original connectors 2. Original Korea lens 3. 1 OZ Aluminum PCB with V wear exposure technology 4. The lamp is 3V, power 1W, use 3030 EMC bracket 5. Original code: 47'' ROW2.1 REV 0.7 R1-TYPE 6916L-1174A 47'' ROW2.1 REV 0.7 L1-TYPE 6916L-1175A 47'' ROW2.1 REV 0.7 R2-TYPE 6916L-1176A 47'' ROW2.1 REV 0.7 L2-TYPE 6916L-1177A 6. Quality warranty is 1 year, we refund fully there's any problem with the led strip lights. Part Number 6916L-1174A  6916L-1175A   6916L-1176A 6916L-1177A  6916L-1359A   6916L-1360A 6916L-1361A  6916L-1362A Board Number 1 47'' ROW2.1 REV 0.7 R1-TYPE 6916L-1174A 47'' ROW2.1 REV 0.7 L1-TYPE 6916L-1175A 47'' ROW2.1 REV 0.7 R2-TYPE 6916L-1176A 47'' ROW2.1 REV 0.7 L2-TYPE 6916L-1177A Board Number 1 LC470DUE-SFR1  LC470DUG-JFR1  LC470DUE-SFR2  LC470DUE-SFR3  LC470DUE-SFR4  LC470DUESFU1    LC470DUE-SFU2  LC470DUE-SFU3 LC470DUE-SFU4

Floor Checker Plate, sized as 4500 X 2230 X 5.00 mm thickness of which will be 4-4.5 mm without checker and with checker the thickness will be 5-5.2 mm. Length of checkers will be 35 mm and width will be 5 mm and distance between the checkers will be 8 mm. Checkered Plates 12 mm : Material Grade : ASTM A36. Thickness : 12 mm. Shape/Dimensions : two-way raised pattern, pattern shall be conform to ASTM A786 Bearing bar for flooring : plate 6 mm x 50 mm or 12 mm x 25 mm. Trim band for flooring : plate 6 mm x 25 mm or 12 mm x 25 mm. Backing plates for flooring: plate 3 mm x 25 mm. Toe plate around opening : plate 6 mm x 100 mm. Checkered Plates 8 mm (optional): Material Grade : ASTM A36. Thickness : 8 mm. Shape/Dimensions : two-way raised pattern, pattern shall be conform to ASTM A786 Aluminium Checker Plates for following Items Chequerd Plate, Raised pattern type: Five bar Size: 8’ x 4’ x 5 mm Thk. Material Al. 6061 Chequerd Plate, Raised pattern type: Five bar Size: 8’ x 4’ x 5 mm Thk. Material : Al. 3003 Chequerd Plate, Raised pattern type: Five bar Size: 8’ x 4’ x 5 mm Thk. Material : Al. 1060 Aluminium Checker plates ( 5 Pattern ) Grade 5754 H114 - 5 mm thickness We offer stainless steel, steel, and aluminium checker plate 1000x20000 Plates steel Checkered Quality ASTM size 6.35 x 4' x 8' the mill has to deliver ISO 9001 certification 3mm and 6mm Checker plate (5 bar) raised pattern height for a 3/8" thick ASTM A36/786 checkered plate 1 bar and 2 bar checke plate sheets an d size of sheet to use it on cupboards 2mm thk galvanised/zinc coated steel chequer plate.

Five Bar Stainless Steel Checkered Plate offers excellent physical and chemical properties as well as functional anti-slippery properties. Stainless steel checkered plate sheet with five bar pattern has a bigger density of embossed pattern compared with single bar, two bar or three bar designs, hence, this kind of checkered ss plate offers superior anti skidding force over checkered plates with less bar number pattern. Stainless steel checkered plate five bar sheets are mainly used for food industry equipment, ordinary chemical equipment, building, householdeffects, dinnerware, cupboard, water heater, bathtub and architectural designs. Features: 1. Corrosion resistance and alkaline resistance. 2. Strong. 3.Antirust 4.High temperature resistant 1000-1200 degrees. 5. A variety of patterns both for anti skidding and decorative effects. Standard followed: AISI, ASTM, JIS, SUS,GB Material: SUS304 304L 316 316L 317 317L 309S 310 430, etc. Plate or Sheet Width: 1219mm,1250mm,1500mm,2000mm or as request Plate or sheet thickness: 0,3mm-12mm Length: 2000mm,2438mm,3000mm,6000mm or as request

Galvanized Chequer Plate refers to hot rolled steel plate or coil chequered in one side surface and hot dipped galvanised for anti corrosion and anti rusting protection. Chequer plates - galvanized mild steel or aluminum? Aluminum chequered plate is more expensive and mainly used for interior and outer building decoration, ceiling panels, etc. Galvanized steel chequered plate is less expansive and mainly used for various factory and industrial flooring uses.

SS checker plates are commonly made of SUS 304, 304L, 316 and 316L material types, also low colbalt stainless steel and 430 materials. 304 Grade Stainless Steel Checker Plate 5mm stainless steel chequer plate sheet Cut plates: 40" x 40" 5 bar AISI304 stainless steel checkered plate Sheet size 1,250 x 2,500 x 3 mm. Checkered Plate SS304 10mm x 1220MM W x 2440mm L Stainless Steel Checker Plate SUS304 4.5mm*1219*2438 Destination: Japan Stainless steel checker plate 304L. Cut plate size: 1/5*3*.004 SS 304 Chequered Plate Size: 2500MM x 1250MM x 6MM Deviation to the extent of +1.14 mm &-0.25 mm in thickness AISI 304 hot-rolled checkered plates 3x1250x2500 4x1250x2500 Checkered ss plates with different embossed images 6/5mm tear drop pattern plate in AISI 304 Sheet size: 5mm x 1219mm x 5800mm 5mm x 1500mm x 3000mm AISI 304 Checker Plate Plate AISI 304 Checker (flat bottom) 3 x 1000 x 3000MM 2 bars Stainless Steel Diamond Plate Stainless steel checker plate 3mm thick for architectural wall lining Sheet size:1600 mm High Material 304 Stainless steel chequered cut plate Sheet size 4 to 4.5mm x 36" x 80" Material Garde-304. For wall protection AISI 316L Grade Stainless Steel Checker Plate Sheet Press type Sheet size: 3.5mm x 1219mm x 2438mm Prime stainless steel checker plate sheet AISI 316L 3.0mm x 1219mm x 2438mm 316 Stainless Steel Chequer Plate Material 316 or 316L Thickness: 8 mm Sheet size: 6 m x 2 m Low Cobalt Stainless Steel Checker Plate Stainless Steel Plate SS 304L EN 10088 1.4307 Equivalent to ASTM A240 304L With chemical impurities limitation as Cobalt (Co) – max 0.050 wt. %, Niobium (Nb) – max 0.10 wt. %, Tantalum (Ta) – max 0.01 wt. % of different thickness of plate. Sheet thickness: 2 mm, 5 mm, 20 mm The standard sheet / plate: 4 feet by 8 feet while a variety of sheet sizes available to meet various applications. 430 Stainless Steel Sheet Plates Thickness 0.5 mm, 0.7 mm, 0.8 mm, 1mm, 1.2 mm, 1.5mm, 2mm Surface: 2B (Cold rolled flat Steel) and Grindling and pvc. Sheet plates dimensions: 1000x2000 mm, 1250x2500 mm, 1500x3000 mm