Offers to Sell

This EFI Vutek ASM, Jetpack UV Print Head Grey Scale Platinum is suitable for VUTEk GS-series printers. This printhead includes the heating element and the smoothing electronic board. The jetpack also includes a set of two Jet Clamps (part number 45083572 / 45093679 / 45095093) and screws to install and aligne the printheads on the Vutek printer. This is the original VUTEk part (number replacing numbers 45083572 / 45093679 / 45095093 / 45093679 / 45084621). This is the latest upgraded head that comes with the connector.

Minimum Order: 1 bags

The JV34-260 Printhead ID Set can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the JV34-260 Printhead ID Set is 8 kHz.

Minimum Order: 1 bags

This Printhead Assy is suitable for the Mimaki UJV / JFX / UJF-706 Printers. This is the original Mimaki part (number KX-CE308644CS-Gen4). This part does not include the metallic bracket that can be easily re-used from the previous head. Technology: Multi-drop grayscale micro-piezo If the metallic bracket also needs to be replaced, part number M008386 should be purchased instead.

Minimum Order: 1 bags

The Dimatix StarFire SG1024/MA is compatible with solvent, UV-curable, and aqueous based inks and maintenance fluids.

Minimum Order: 1 bags

304 stainless steel has a high resistance to rust. It withstands corrosion from most oxidizing acids and is often used for kitchen and food applications. However, it is susceptible to corrosion from chloride solutions (notably saline environments with high amounts of sodium chloride). Chloride ions can create localized areas of corrosion, or what is also known as "pitting," which can spread beneath protective chromium barriers to compromise internal structures. Solutions with as little as 25 ppm of sodium chloride can begin to have a corrosive effect. 316 grade is the second-most common form of stainless steel. It has almost the same physical and mechanical properties as 304 stainless steel and contains a similar material make-up. The difference is that 316 stainless steel incorporates about 2 to 3 percent molybdenum, which increases corrosion resistance - particularly against chlorides and other industrial solvents. 316 stainless steel is commonly used in many industrial applications involving processing chemicals, as well as high-saline environments such as marine, coastal regions and outdoor areas where de-icing salts are common. Due to its non-reactive qualities, 316 stainless steel is also used in the manufacture of medical industry, surgical instruments, food industry, & pharmaceutical equipment.

This Seiko 508GS 12PL solvent / UV printhead is suitable for a range of printers, including Infiniti printers. The Seiko 508GS is a state of the art grayscale print head with a built-in damper assembly and a nozzle guard. This is the original Seiko.

Minimum Order: 1 bags

The SM-128 AA Spectra Printhead is a compact and lightweight 50 pL jetting assembly designed specifically for ink jet applications requiring multiple printheads packed tightly together SM-128 AA

Minimum Order: 1 bags

Inkjet printer 128/200 head Original XAAR 128 40 blue print head Compatible with a wide range of oil-based, solvent and dye sublimation inks, the Xaar 128 is extensively used across the coding & marking and wide-format graphics industries. It's a consistent and highly flexible inkjet solution for producing eye-catching marketing media. This is original xaar 128 360dpi 40pl print head. Product Specifications : Tag: Dark grey tag Active nozzles: 128 Print swathe width: 17.4 mm Nozzle pitch: 137.1 μm Nozzle density: 185 npi Drop velocity: 6 m/s Printhead weight: 15.5 g Dimensions: 37.2 x 40.8 x 11.3 mm Drop volume: 40 pl Typical firing frequency: 8.3 kHz Xaar 128 Techical Datasheet here

Minimum Order: 1 bags

The VJ-1628TD Printhead Assy solvent printhead is based upon the most recent Epson technology. This is the original Mutoh part (number DG-42771).

Minimum Order: 1 bags

Original Roland DX7 Eco Solvent Printhead for RE-640 / VS-640 - 6701409010 Product Specifications : Technology: Micro-Piezo Native resolution: 360 dpi Min. Droplet Size: 1.5 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: eco-solvent and mild solvent Damper type: requires DX6 Valve Dampers

Minimum Order: 1 bags

This Ricoh GEN6 head (MH5320 series) is compatible with UV based inks. The service life of the MH5320/MH5340 is more than double that of the MH5421/MH5441 that preceded it.

Minimum Order: 1 bags

This original Kyocera KJ4A-0300 printhead is designed for high speed single-pass applications with printers using aqueous ink, multi-pass using UV inks. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz.

Minimum Order: 1 bags

SureColor SC-T3000 SureColor SC-T3200 SureColor SC-T5000 SureColor SC-T5200D SureColor SC-T7000 SureColor SC-T7200 SureColor SC-T7200D SureColor SC-T5200 Printko provides a wide variety of orginal parts for Epson. See all Epson Spare Parts and Printheads , products at Our Epson section where you will find all spare parts for your machine and all other models. Most items are shipped same day with multiple shipping options which you can choose at Checkout. For technical information about your Epson equipment. We invite you to consult through Our Manufacturers Network

Minimum Order: 1 bags

3D Casting Glass Non-Toxic UV Resistant Epoxy Resin And Hardener 3:1 Or 1:1 Liquid Resin Epoxy For Coating Name Epoxy Resin 2467 Feature Non VOC,Non Odour,100% Solid, Solvent Free Mixing Ratio A: B = 3:1 (By weight) Curing time 10-12hrs;Can polish after 24-48hrs,(Different thickness will affect the curing time) Aorun Epoxy Resin is a two-component transparent epoxy resin potting adhesive with low viscosity,good fluidity, and easy penetration into the gap of the product.It can be cured at room temperature or medium temperature, and the curing speed is fast; after curing, there are no bubbles, the surface is smooth, and the gloss Good, high hardness The cured product has good acid and alkali resistance, moisture-proof, waterproof and oil-proof. This transparent epoxy resin for rough casting or deep casting is "top of the line", known for its high quality epoxy formulation that can be used in a huge range of applications, including: - Jewelry, Furniture, Promotional Products, Trophies, Flower Shows , Artwork of Art, Models Crafting, Decoration, "Disposable" Niche Products, etc. Quality multifunctional Thick Pour or even we called Deep Cast Clear Epoxy Resin for all those volumes you use on the job - And at no extra cost! Environmental , strong and long-lasting adhesion, good waterproof performance, fast curing, long service life. 1.Can cure at room temperature or heating curing, 2.Can automatic antifoaming 3.Can automatic leveling 4.Cured without ripples, no bubbles Items Units/conditions Technical Data Viscosity Shore-D 80-85 Volume resistivity 25℃/ Ω./ cm 4.3x1015 Surface resistivity 25℃/ Ω. 2.6x1014 Dielectric strength 25℃ KV/MM 25 Coefficient of linear expansion CM/K <6.1x10-5 Glass transition temperature ℃ >90 Temperature resistant ℃ -60~120 The above performance data is typical data measured in a laboratory environment with a temperature of 25°C and a humidity of 70%. It is for customer reference only