Brake Systems

√ Trailer Backing Plate √ Electric Drum Brake √ With Parking Brake √ Trailer Brake Assembly √ Off Road Electric Brakes √ With Handbrake √ 1400 KG – 1600 KG Axle √ 10” Brake Drum 10" x 2 1/4" offroad trailer electric brake assembly with handbrake is specifically designed for extreme rugged conditions in Australia. The 10” electric backing plate mounts on standard 4 bolt flange, and it is used to work with slimline and parallel 10” brake drums. The obvious difference between off road electric brakes and electric brakes with handbrake is the magnet, off road magnet has a high-tech plastic core and that will reduce vibration, wear and high temperature damage, in order to prolong the life of electric brakes. Features l 10” x 2 1/4” Trailer Drum Brakes are recommend replacing AL-KO off road electric brakes to the caravans, campers or trailers. l E-coated backing plates resist wear and corrosion. l Periodic manual adjustment required. l Fully assembled and easily installation, mostly used for Australian offroad trailers. l Electric backing plates are an extremely efficient and reliable braking system that require minimum maintenance. l Needs only an electric brake controller to work. l High grade brake linings provide smooth efficient braking. Specifications Ø Dimension: 10 inch x 2.25 inch Ø Axle Capability: 1400 kg (13”-14” wheel) to 1600 kg (15”-16” wheel) Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 10” x 2 1/4” Electric Brake Shoe Set x 1 ² E-coat Backing Plate x 1 ² Magnet Lever x 1 ² Green Wire Offroad Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 1

Minimum Order: 300

√ Trailer Brakes √ Manual Adjustment √ With handbrake √ 12 drum brake √ 12 inch electric brake √ trailer axle with brakes √ 6000 lbs trailer axle √ trailer brake kits ATM (Aggregate Trailer Mass) GTM (Gross Trailer Mass) In Australia, all trailers with ATM or GTM over 2000kg must have a Breakaway Brake setup that will immediately apply the trailer brakes in the event of the trailer becoming disconnected from the towing vehicle. Trailer axle with electric brakes always equipped with handbrake to meet the Australia Standard. Features l Electric brake assemblies with hand brake make you a better trip. l Needs only an electric brake controller to work. l 12" backing plate is electrophoretic-coated to resist corrosion. l Periodic manual adjustment required. l 12" x 2" Trailer Electric Brake Assembly with Parking can work with most electric trailer brake system 5200 lbs trailer axle, 6000 lbs trailer axle and 7000 lbs axle, including Dexter, Hayes and many others. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 5200 lbs/6000 lbs/7000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø White/Black Wire Magnet x 1 Ø Magnet Lever x 1 Ø Handbrake x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

√ Trailer Brakes √ Manual Adjustment √ Brake assembly √ 12’’ x 2’’ drum √ 12" electric brake √ 12 inch trailer brake √ 6000 lbs trailer axle √ 12" trailer drum brakes 12" drum brake assemblies are usually work with the same size brake drum for 6k lbs trailer axles. This basic trailer brake assembly are produced in huge quantity and sold million pcs per year to America and Canada. The original design for 12’’ electric brake assembly are fit for those trailer axles with the load of 6000 pounds, but with the reinforced black wire magnet, the brake assembly could work on 7000 lbs trailer axles. Features l Electric drum brakes are easy to install and control. l Needs only an electric brake controller to work. l No need actuator or hydraulic lines. l 12" electric backing plate is electrophoretic-coated to resist corrosion. l Periodic manual adjustment required. l Electric brake assembly can exchange with most 5 lug trailer axles 6000 lbs, including Dexter, Hayes and many others. Specifications Ø Dimension: 12 inch x 2inch Ø Axle Capability: 6000 lbs Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 12” x 2" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø White/Black Wire Magnet x 1 Ø Magnet Lever x 1 Ø Springs x 2 Ø Adjuster x 1

Minimum Order: 300

This trailer stub axle spindle with 4 hole flange is for 10" x 2 1/4" electric or hydraulic brake assembly. A varied trailer spindles and trailer axle components are provided for the OEMs, distributors, wholesalers.

Minimum Order: 200

We are a Chinese manufacturer specializing in trailer axles, brakes, drums and hubs. We offer a great range of trailer parts to choose from, such as spring/torsion axles, 10”/12”/12.25” electric drum brakes (standard/with hand brake/self-adjusting/off-road), 10”/12” hydraulic drum brakes (uni-servo/free backing), 9” hydraulic/mechanical drum brakes, hydraulic/mechanical disc brakes, brake disc rotors, brake drums and hubs etc. E-coat, dacromet and hot dip galvanize are available. What’s more, we are able to produce trailer parts according to customer’s drawings or samples.

Minimum Order: 300

We can find an axlewith drum brakes in this photo, this10" electric brake assembly with handbrakeis one of our hot products.Other hot products are trailer torsion/spring axles, electric/hydraulic/mechanical brakes, rotors, hubs and drums. Our products exchange with many namebrand trailer parts suppliers, such as AL-KO, Dexter, Trojan, Axletek, Lippert,etc.We´re a Chinesemanufacturer with over 10 years’ export experience that specializes in supplying trailer chassis parts to United States, Canada, Australia and New Zealand. We´ve worked with manytrailer manufacturers, distributors and wholesales to expand their productrange and reduce their costs without sacrificing quality.Please don’thesitate to send me the product specifications for inquiry If you areinterested, I am sure you will get prompt attention.

Minimum Order: 300

Trailer electric drum brakes are used for utility trailer, enclosed trailers, camper trailers, caravans, flat trailers, livestock trailers, custom trailers etc. And boat traielrs use hydraulic drum brakes and mechanical brakes. Mechanical brakes are for light duty trailer and electric brakes and hydraulic brakes are for light, medium and heavy duty trailers.

Minimum Order: 400

√ RVH √ 10 x 2.25 inch drum √ With Handbrake √ Electric Brake Assembly with Parking √ utility trailer axle kits √ trailer axle repair √ 3500 lb trailer axle √ trailer axle parts Parking brake also known as hand brake or e-brake (emergency brake). 10 inch electric drum brakes will become much safer with handbrake for light duty trailers, especially box trailers, caravan and flat trailers etc. Meanwhile trailer brake kit with handbrake will make the trailer braking system stronger. RVH is very hot in Australia for Recreation Vehicles. Enjoy a better holiday. Features l 3500 trailer axle equipped with RVH will offer you a better trip. l 10 inch trailer brake is easy to install and control. l Needs only an electric brake controller to work. l No need actuator or hydraulic lines. l Backing plates and the lever are E-coated to resist corrosion. l Periodic manual adjustment required. l World class brake linings provide smooth efficient braking . l Exchange with most trailer axle 3500 lb, including Dexter, AL-KO, Hayes, and many others. Specifications Ø Dimension: 10 inch x 2 1/4 inch Ø Axle Capability: 3500 lbs Axle Ø Mounting Flange Bolt Pattern: 4 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition Ø 10” x 2 1/4" Brake Shoe Set x 1 Ø E-coat Backing Plate x 1 Ø Oval Magnet with Green Wire x 1 Ø Lever Arm x 1 Ø Long Springs x 1 Ø Adjuster x 1

Minimum Order: 300

√ Electric Backing Plate √ Trailer Axles √ Trailer Electric Brakes √ For 2500 kg Axle √ Electric Brake Assembly √ 15” – 16” Wheel √ 12 Inch Drum √ Trailer Brake System This 12” x 2” electric brake assembly with handbrake is designed for the trailers, caravans and campers in Australia market, it is operated by a trailer controller and they can provide an ability for the driver to apply the trailer brakes manually. It is used for 15”-16” wheel, and the axle capacity is 2500 kg. Features l 12” x 2” electric brakes with hand/parking brake are very popular in Australia. l E-coated backing plates resist wear and corrosion. l Trailer electric brake assembly with parking brake is more independent and more reliable than the without parking brake version in some circumstances. l This 12 inch electric brake magnet is different from 12” off road electric brake. l Includes brake shoes, magnet, mechanical parking brake lever and backing plate, ready for installation. l High grade brake linings provide smooth efficient braking. Specifications Ø Dimension: 12 inch x 2 inch Ø Axle Capability: 2500 kg (15”-16” wheel) Axle Ø Mounting Flange Bolt Pattern: 5 bolts Ø Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH Product Composition ² 12” x 2” Electric Brake Shoe Set x 1 ² E-coat Backing Plate x 1 ² Magnet Lever x 1 ² Black Wire Magnet x 1 ² Brake Adjuster x 1 ² Long Spring x 1 ² Short Spring x 1

Minimum Order: 300

Product Description SQCS Rubber Radiator Hoses A2045019682 2045019682 Coolant Water Hose For Mercedes W204 W212 W207 k20 swap hose for 1980 bmw e21 fuel tank crossover hose 2inch w211 e300 e350 car radiator hose kia cerato 20132015 hoseclutch master cylinder hose for bmw e46 n54 water hose 58190484 deutz intercooler hose tank hose hose cover mercedes w210 mercedes w203 mercedes w203 coupe e- class-w211-amg mercedes cl 500mercedes benz w203 amg 1998 w202 mercedes Size Same as original, Standard Size Car Model C230 C260 E450 E500 Material Rubber OEM NO. 2045019682 Color Black Product Name Radiator Hose Fit For W204 W212 W207 Application Automotive Cooling System Payment Method T/T, Westerm Union Quality Warrantee for 6months ~1 year ! Delivery time 15~45 Days A2045019682 W212 Rubber Radiator Hoses EPDM 2045019682 2 Inch For Mercedes W204 0A2045019682 W212 Rubber Radiator Hoses EPDM 2045019682 2 Inch For Mercedes W204 1

Commercial Vehicles Brake Pads Features 1. Offers longer brake life and reduces disc wear 2. Provides superior braking in all temperatures and conditions 3. Features a minimum brake-in and bedding-in period 4. Excellent NVH properties 5. Uses 100% asbestos-free formulation 6. Specific to meet Transit, Coach, Heavy Duty & Trailer vehicles requirements Advanced Back Plate Process Kamien CV Brake Pads are 100% produced with the most advanced back plate processing, including Steel Wire-drawing, Casting, Steel Mesh etc. To guarantee the shear force between the friction material and the back plate, under both the normal qty and above 800 degrees.  Multiple Compounds Kamien CV Brake Pads are marketed with 3 different semi-metallic compounds: Premium & Performance & Ultra. With the strong technical team, we can also develop different compounds to meet the requirements of Truck Racing Games. Warranty We offer 12 MONTHS or 20.000 KM replacement warranty, based on some terms & conditions. Kamien Products lifespan varies from 50.000 KM to 300.000 KM in normal driving conditions. https://www.kamienbrake.com/cv- , brake-pads/commercial-vehicles-brake-pads.html

Minimum Order: 50

Brake Repair Kits Kamien can provide varies of brake repair kits products, including Clips, Guide Pin Set, Piston Repair Kit, Brake Shoe Spring Kit, Adjusters etc. Warranty We offer 12 MONTHS or 20.000 KM replacement warranty, based on some terms & conditions. Kamien Products lifespan varies from 50.000 KM to 70.000 KM in normal driving conditions. Free Sample Policy 1 Set of FREE Sample are always available, shipping cost is requested. Certificate IATF 16949 https://www.kamienbrake.com/brake-repair- , kits/brake-repair-kits.html

Minimum Order: 50

Car Brake Discs and Drums All Kamien Discs and Drums are reverse engineered from OEM Drawings. Precise Machining & Casting All Kamien Discs and Drums are reverse engineered from OEM Drawings. brake disc manufacturers:Kamien Machining Specification: Disc run out is within 0.0015mm, and DTV Tolerance specification is within 0.005mm. All discs and drums are mill balanced. Optional Surface Treatment Smooth / Drill Holes / Slots / Hook Shape Slots Geomet Painting, Phosphorization etc. https://www.kamienbrake.com/car-brake-discs-an , d-drums/car-brake-discs-and- drums.html , Warranty We offer 12 MONTHS or 20.000 KM replacement warranty, based on some terms & conditions. Kamien Products lifespan varies from 50.000 KM to 70.000 KM in normal driving conditions.

Minimum Order: 50

Kamien Premium Brake Shoes are manufactured to match OE specifications, ensuring the ultimate in vehicle stopping power and durable performance. OE Style Design Kamien Premium Brake Shoes are manufactured to match OE specifications, ensuring the ultimate in vehicle stopping power and durable performance. Combined with high quality friction materials, our brake shoes are made from 100% high-caliper carbon steel that will enhance your vehicle’s braking capabilities while eliminating chatter and rear-wheel lock up. Multiple Compounds Kamien Brakes provides multiple Low-Metallic, Semi-Metallic, Ceramic, Organic compounds for customers’ choice, based on different market and different types of cars, special hand brake compound is available. Warranty We offer 12 MONTHS or 20.000 KM replacement warranty, based on some terms & conditions. Kamien Products lifespan varies from 50.000 KM to 70.000 KM in normal driving conditions. https://www.kamienbrake.com/car , -brake-shoes/car-brake-shoe.html

Minimum Order: 50