Offers to Sell

Gearbox oil seals are crucial components that ensure the efficient and reliable operation of gearboxes. Their primary role is to prevent oil leakage and protect the internal components from dirt, water, and other contaminants. However, the material selection for gearbox oil seals plays a significant role in determining their performance, durability, and ability to withstand harsh operating conditions. In this article, we will explore the various materials commonly used in the manufacturing of gearbox oil seals, highlighting their advantages and application areas. 1. Why Material Selection is Crucial for Gearbox Oil Seals Gearbox oil seals operate in a highly demanding environment, exposed to various stress factors such as high pressures, temperature fluctuations, and friction from the rotating shaft. The right material is essential for maintaining the integrity of the seal and ensuring long-term, trouble-free performance. The material chosen must exhibit excellent wear resistance, high-temperature stability, and chemical compatibility with the lubricants used in the gearbox. Choosing the wrong material can lead to premature failure of the seal, resulting in oil leakage, contamination, and ultimately, gearbox damage. This can result in costly repairs and downtime, which is why selecting the right material is critical for both manufacturers and those involved in the B2B distribution of oil seals. 2. Common Materials Used for Gearbox Oil Seals There are several materials used in the construction of gearbox oil seals, each with specific properties suited to different operating conditions. Below, we will discuss some of the most commonly used materials and their unique characteristics. 2.1 Nitrile Butadiene Rubber (NBR) Nitrile rubber, also known as NBR, is one of the most widely used materials for manufacturing gearbox oil seals. This material is well-regarded for its excellent resistance to petroleum-based oils and fuels, making it an ideal choice for sealing applications in gearboxes that use mineral oils. Advantages of NBR: Oil Resistance: NBR is highly resistant to a wide range of oils, greases, and hydraulic fluids. Wear Resistance: It offers good resistance to wear and abrasion, which is essential in gearbox applications where constant movement occurs. Cost-Effective: NBR seals are generally affordable, making them a popular choice for many industrial applications. However, NBR does have limitations. It is not suitable for high-temperature environments and is prone to degradation in the presence of high heat, making it less ideal for applications in gearboxes operating at elevated temperatures. 2.2 Fluoroelastomers (FKM) Fluoroelastomers, often referred to by the brand name Viton, are high- performance materials known for their exceptional resistance to high temperatures, oils, and chemicals. FKM is often used in more demanding gearbox applications, particularly in industries where extreme temperature fluctuations or exposure to aggressive chemicals is common. Advantages of FKM: High-Temperature Resistance: FKM can withstand continuous exposure to temperatures up to 200°C (392°F), and intermittent exposures to even higher temperatures. Chemical Resistance: It is highly resistant to a variety of chemicals, including acids, solvents, and oils, making it suitable for harsh environments. Durability: FKM oil seals offer excellent longevity, even in severe conditions, reducing the frequency of replacements. While FKM is highly durable, it is also more expensive compared to other materials like NBR, making it a choice primarily for high-end applications where reliability and performance are paramount. 2.3 Polyurethane (PU) Polyurethane is a synthetic polymer that offers a combination of high strength, flexibility, and resistance to abrasion. It is increasingly used in oil seals for gearboxes, particularly in industries where seals need to withstand high pressures and mechanical stress. Advantages of Polyurethane: Abrasion Resistance: PU is incredibly resistant to wear and tear, making it an ideal material for gearboxes that operate under high pressure. Flexibility: Despite its toughness, PU retains flexibility even in low temperatures, ensuring a reliable seal in fluctuating conditions. Resistant to Chemicals and Oils: Polyurethane seals exhibit good resistance to oils, fuels, and chemicals, which are often found in gearbox lubricants. However, while PU offers excellent performance in high-pressure and abrasive conditions, it is not as resistant to high temperatures as FKM and may degrade in extreme heat. 2.4 Polytetrafluoroethylene (PTFE) Polytetrafluoroethylene, commonly known as PTFE or Teflon, is a material known for its excellent chemical resistance and low friction properties. PTFE is often used in oil seals for gearboxes that require a high degree of chemical compatibility and low friction to reduce wear on both the seal and the shaft. Advantages of PTFE: Chemical Resistance: PTFE is resistant to virtually all chemicals, oils, and solvents, making it ideal for gearboxes that use aggressive fluids. Low Friction: PTFE offers very low friction, which helps to reduce the wear and tear on both the seal and the shaft. Temperature Resistance: PTFE can handle a wide range of temperatures, making it suitable for both high and low-temperature applications. The main drawback of PTFE is its relatively poor wear resistance compared to materials like polyurethane, making it less suitable for high-pressure applications unless combined with other materials. 3. Choosing the Right Material for Gearbox Oil Seals When selecting a material for gearbox oil seals, it is important to consider several factors, such as: Operating Temperature: Choose a material that can withstand the temperature range of your application. Lubricant Compatibility: Ensure the material is compatible with the lubricant used in the gearbox, whether it’s mineral oil, synthetic oil, or grease. Pressure and Load Conditions: If the gearbox operates under high pressure or load, consider materials with superior wear resistance, like polyurethane. Chemical Exposure: For gearboxes exposed to chemicals or aggressive fluids, materials like PTFE or FKM are ideal due to their chemical resistance. Choosing the right material for gearbox oil seals is a critical decision that can directly impact the performance and longevity of the gearbox. Materials like NBR, FKM, PU, and PTFE each offer unique advantages depending on the operating conditions and environmental factors. Understanding these materials’ properties and how they align with the gearbox’s needs can help you make an informed decision, whether you’re a manufacturer, distributor, or wholesaler in the sealing industry.

Minimum Order: 1000

When it comes to maintaining the optimal performance of industrial machinery, the role of gearbox oil seals cannot be overstated. These small components are often the unsung heroes, keeping vital lubricants in place while preventing contaminants from entering. Given their importance, it is crucial to select the right material for a gearbox oil seal, as the material directly impacts the seal's effectiveness and longevity. Over the years, I've seen how different materials perform under various conditions, and in this article, I'll provide a deep dive into the key materials used for gearbox oil seals and share practical insights on how to choose the right one for your application. Understanding the Role of Gearbox Oil Seals A gearbox oil seal serves two primary functions: to contain the lubricant inside the gearbox and to keep external elements like dirt, moisture, or contaminants out. If the seal fails, the gearbox can experience oil leakage, overheating, increased friction, and ultimately, failure. To perform their function reliably, oil seals need to withstand high speeds, pressure, and temperatures without losing their elasticity or strength. So, the material used for an oil seal must match the specific operating conditions it will be exposed to. Key Materials for Gearbox Oil Seals Over the years, I've worked with various oil seal materials, each offering unique advantages based on the working environment. Here’s a breakdown of the most commonly used materials for gearbox oil seals: Nitrile Rubber (NBR) Nitrile rubber is one of the most commonly used materials for oil seals, thanks to its excellent resistance to oil, grease, and fuel. It performs well in moderate temperatures and pressure conditions, making it a go-to for standard gearbox applications. However, it is less suited for high-temperature environments or chemical exposure. Fluoroelastomer (FKM) When the operating conditions are more extreme—particularly in high- temperature environments—fluoroelastomer (FKM) becomes the material of choice. FKM offers exceptional resistance to heat, oil, and chemicals, making it ideal for gearboxes operating at elevated temperatures or with aggressive fluids. It can easily withstand temperatures from -30°C to +250°C, making it versatile for various industrial applications. Polytetrafluoroethylene (PTFE) PTFE is often chosen for its outstanding chemical resistance and low friction properties. It’s particularly beneficial for gearboxes that require tight seals in highly corrosive environments or with specialized lubricants. PTFE seals are also very effective in extreme temperatures, operating smoothly up to 250°C. The material’s low friction helps reduce wear and energy loss, providing a longer lifespan for machinery. Silicone Rubber (VMQ) Silicone rubber is favored for its high-temperature stability, flexibility, and resistance to aging, making it suitable for gearboxes in environments where high temperatures are a concern. However, it’s not as resistant to oils and fuels as other materials like NBR or FKM. Silicone is more commonly used in less demanding applications or where sealing is required for a broader range of temperatures. Polyurethane (PU) Polyurethane offers excellent wear resistance and is perfect for high-load, high-speed applications. It’s used in gearboxes where the seal needs to handle heavy pressure and high-frequency movements. Polyurethane oil seals have excellent abrasion resistance, which makes them ideal for long-lasting performance in demanding environments. Selecting the Right Material: What to Consider Choosing the right material for a gearbox oil seal is not just about picking the most durable option—it’s about selecting the one that matches the specific needs of your application. Here are a few key factors to consider when making this decision: Temperature: If the gearbox operates in a high-temperature environment, materials like FKM or PTFE are best. These materials maintain their elasticity and sealing properties even under extreme heat. Lubricant Compatibility: Different lubricants can affect the performance of certain seal materials. For example, NBR works well with petroleum-based oils, while FKM is better suited for synthetic oils and chemical applications. Pressure and Speed: In high-pressure or high-speed conditions, materials like polyurethane or PTFE are ideal due to their excellent resistance to mechanical stress and wear. Environmental Conditions: If the gearbox is exposed to corrosive elements or harsh chemicals, PTFE or FKM will offer better protection, as these materials are highly resistant to chemical attack. How NQKSF Oil Seals Stand Out As someone who has worked in the sealing industry for over 30 years, I’ve seen first-hand how essential it is to have a reliable supplier. NQKSF stands out for its comprehensive approach to sealing solutions. Here’s why many in the industry turn to NQKSF for their oil seal needs: Extensive Inventory and Fast Delivery NQKSF stocks over 10,000 different standard seal sizes, ensuring that you can get the parts you need quickly, without having to wait for custom production. This is especially important for urgent replacements. Tailored Seal Solutions For unique operational environments, NQKSF offers custom seal solutions that are tailored to your specific requirements. From material selection to design and testing, NQKSF ensures that your seals are perfectly matched to the working conditions of your machinery. Expertise in Sealing Systems With more than 30 years of experience, NQKSF’s technical team works closely with customers to optimize sealing systems, improve performance, reduce maintenance costs, and extend the life of the equipment. This kind of expertise can make all the difference in the long-term reliability of your gearboxes. Choosing the right material for gearbox oil seals isn’t just about ensuring the seal does its job—it’s about enhancing the overall performance and longevity of the gearbox. By selecting a material that can withstand the specific demands of your operational environment, you can prevent costly downtime, extend service life, and reduce maintenance costs.

Minimum Order: 1000

Model Number:5o04200860960 Frequency Range:860~960MHz Isolation Min:20dB VSWR Max:1.25 Insertion Loss Max:0.4dB Connector Type:SMT Forward Power:60W Reverse Power:10W Impedance:50 ohm Operating Temperature:-40~+85 degrees C Storage Temperature:-55~+125 degrees C Dimensions: Diameter 20.4 mm*Height 8.6 mm Applications: RF power amplifier protection in UHF communication systems Digital mobile and base station equipment Medical communication and security devices Military and commercial UHF applications IoT and M2M wireless modules Recommended Matching Products: SMT RF power amplifiers UHF transceiver modules PCB based base station hardware Test and measurement equipment for UHF bands Industrial and public safety communication systems 5o.com is a modern high-tech enterprise specializing in passive RF and microwave components, integrating R&D, production, and sales. The company focuses on technological innovation as its core and relies on technology leadership. The company's main products: Microwave RF isolators, circulators, coaxial terminations, coaxial attenuators, power splitters/dividers, waveguide to coaxial adapters, directional couplers, RF filters, and duplexers/multiplexers and other microwave passive components.

Minimum Order: 1 bags

Model Number:5o0415031003250 Frequency Range:3100~3250MHz Isolation Min:20dB VSWR Max:1.25 Insertion Loss Max:0.4dB Connector Type:SMT (Surface Mount) Forward Power:60W Reverse Power:10W Impedance:50 ohm Operating Temperature:-40 to +85 degrees C Storage Temperature:-55 to +125 degrees C Dimensions: Diameter 15.5 mm * Height 7 mm Applications: RF power amplifier protection in microwave systems Digital satellite and mobile communication equipment Medical communication and security devices Military space and commercial microwave applications 5G and wireless infrastructure Recommended Matching Products: SMT RF power amplifiers Microwave transceiver modules PCB based communication systems Test and measurement equipment for microwave bands Military and aerospace electronic systems 5o.com is a modern high-tech enterprise specializing in passive RF and microwave components, integrating R&D, production, and sales. The company focuses on technological innovation as its core and relies on technology leadership. The company's main products: Microwave RF isolators, circulators, coaxial terminations, coaxial attenuators, power splitters/dividers, waveguide to coaxial adapters, directional couplers, RF filters, and duplexers/multiplexers and other microwave passive components.

Minimum Order: 1 bags

Model Number:5o2654540863870NKNJ Pass Band:863 to 870MHz Insertion Loss Max:1.0dB Ripple Max:0.2dB VSWR Max:1.22 Rejection:55dB@DC~833MHz / 55dB@903~3000MHz Power:30W Connector Type:N-F to N-M Operating Temperature:-30 to +70 degrees C Applications: ISM band wireless communication systems RFID and IoT device signal conditioning Industrial scientific and medical frequency band applications Base station and repeater signal filtering Military and commercial secure communication systems Recommended Matching Products: RF transceivers and transmitters Signal amplifiers and repeaters Test and measurement equipment Antenna systems and multiplexers IoT gateway and base station hardware 5o.com is a modern high-tech enterprise specializing in passive RF and microwave components, integrating R&D, production, and sales. The company focuses on technological innovation as its core and relies on technology leadership. The company's main products: Microwave RF isolators, circulators, coaxial terminations, coaxial attenuators, power splitters/dividers, waveguide to coaxial adapters, directional couplers, RF filters, and duplexers/multiplexers and other microwave passive components.

Minimum Order: 1 bags

Model Number:5o1060605225400SK Frequency Range:225 to 400MHz Isolation Min:18dB (0 to +60C)/16dB (-40 to +85C) VSWR Max:1.3 (0 to +60C) / 1.4 (-40 to +85C) Insertion Loss Max:0.8dB (0 to +60C) / 1.0dB (-40 to +85C) Connector Type:SMA-K Forward Power:160W Reverse Power:160W Impedance:50 ohm Operating Temperature:-40 to +85 degrees C Storage Temperature:-55 to +125 degrees C Dimensions:60 mm*60 mm*28 mm Applications: RF power amplifier protection Digital satellite and mobile communication systems Medical communication and security equipment Military space and commercial applications UHF communication and public safety radio systems Recommended Matching Products: RF power amplifiers Transceiver modules Base station equipment Test and measurement instruments Land mobile and public safety radio systems

Minimum Order: 1 bags

The FHDC-21AA-XX serires Armored 8K Fiber Optic HDMI 2.1 Active Optical Cables are supplied with protective caps and optional portable Roxtone PCD 235 & PCD 310 drum. They are ideal alternative replacement for #Klotz FOAUHW, #Kramer CRS- PlugNView,#TechLogix Networx MOFO-HD20ST, #Tripplite #Eaton P568FA series Armored High-Speed Optical HDMI Cable on portable but unbreakable drum reel. Crafted with high-quality hybrid optical fiber cable (4 Fiber & 7 Copper), the 8K Fiber Optic HDMI 2.1 Active Optical Fiber Cables are designed to extend the transmission distance between data source and display devices with a maximum length of 150 meters, which offer unmatched transmission capabilities with a maximum data rate of 48Gbps. These Fiber Optic HDMI 2.1 AOC cables deliver Ultra High Speed performance, ensuring pristine visual quality with resolutions up to UHD 8K/60p and 4K/120p. Highlight Features: Ideal replacement: for Klotz FOAUHW,Kramer CRS-PlugNView,TechLogix Networx MOFO- HD20ST,Tripplite #Eaton P568FA series Retractable & Extremely Durable Design: Durable Aluminum/Steel Construction for less than 25 Lbs; Stackable Frame Design; Protection Caps Included; Compliant with HDMI 1.4, 2.0 and 2.1 specification; High Resolution: Supports UHD 8K/60p and 4K/120p 4:4:4 video signals up to 150 meters for a high-quality viewing experience; High Bandwidth: 48Gbps capacity, ensuring fast and reliable transmission of multimedia content Lossless Transmission: Delivers 8K/60p and 4K/120p visuals, VR, and 3D display signals over long distances Fast Refresh Rate: 60Hz at 8K UHD resolution for crisp, sharp images; higher rates at lower resolutions Dynamic HDR: Optimizes contrast, depth, brightness, and color gamut on a frame-by- frame basis Enhanced eARC: Simplifies connectivity and audio optimization for multiple components High-Quality Audio: Supports up to 192kHz, 24-bit, uncompressed 5.1 and 7.1, Dolby lossless formats, and 32-channel audio VRR for Gaming: Fluid gameplay with minimal lag, judder, and frame tearing Advanced Features: Supports EDID, self-detecting function, ALLM, QMS, and QFT Durable Construction: Zinc-alloy housing, corrosion-resistant gold-plated connectors EMI Resistance: High resistance to electromagnetic interference, ensuring a safe, radiation-free environment Customizable: Up to 150m maximum length (30m max for eARC), custom length, logo, and packaging available

Minimum Order: 10 long tons

IVT-300E electrosurgical unit Generator is a radio frequency electrosurgical generator which is suitable for veterinary surgery.  Cautery may be hand or foot controlled with this unit. Intelligent Device System The intuitive design and user-friendly set-up of the Vet Electrosurgical Generator (diathermy) for us in the modern operating room, it features both Monopolar and bipolar functions to satisfy all the surgeries demands with safety, flexibility, reliability and convenience. REM (Return Electrode Monitoring) Return electrode contact quality monitoring system (REM). The REM system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected, which minimize the danger of burning incidents. Compatible with Other Equipments: Optimum Smoke Evacuation System Multilanguage Available: Language options: English, Spanish, Portuguese, Turkish and etc Application of Use General Surgery; Dermatology; Vascular Surgery; Obstetrics and Gynecology ORL/ENT; Minimally Invasive Surgery (MSI) Cerebral surgery；Neurosurgery, Orthopedics & Plastic Surgery. Low Frequency Leakage: Normal Polarity, Intact Chassis Ground: <10μA Normal Polarity, Ground open< 50μA Reverse Polarity, Ground Open< 50μA Sink Current, 140V Applied, All inputs < 50μA Power Readouts Agree with actual power into rated to within ±20% or 5W, whichever is greater, Dosage Error monitor. Technical Specification Main Frequency: 512 KHz Power Supply: 110V/60Hz；220V/50Hz Weight and Dimension: Weight: 4.00KG Dimension: 25*24*10 High Frequency Leakage: Monopolar: < 150mA; Bipolar <60mA

Minimum Order: 10 long tons

PRODUCT DESCRIPTION Methyl alkenyl polyoxyethylene ether Product Name: Polyether monomer polycarboxylate water reducer macromonomer  Chemical name: methyl olefin polyether monomer HSHP-propyl polyoxyethylene ether  chemical structure: CH2C(CH3)CH2O(CH2CH2O)nH  Product performance: This series of products adopts international advanced external circulation spray B (C) oxy plus It is a device and adopts advanced catalytic technology. It has high double bond retention rate, stable quality, narrow molecular weight distribution, low impurity content and high polymerization activity. This product is suitable for the synthesis of water- reducing agent mother liquor with higher requirements on water-reducing rate. The polycarboxylate water-reducing agent mother liquor produced by this product has high-efficiency particle dispersion performance and retention ability, and has high water-reducing rate and good plasticity. The characteristics of this product are sheet-like, water-soluble, stable in aqueous solution, and can be formulated into various concentrations of aqueous solution, which is more convenient to use.  We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Quality Index:          Indicator  model  ,              Product appearance  (25 ° C)                  Hydroxyl value  mgKOH/g   Unsaturation degree  mmol/g, ≥    pH  1% aqueous solution        HPEG White to yellowish flake 20.5~26.5 0.30 5.5~7.5 Packing specification: 25kg woven bag  Storage and transportation: This series of products is non-toxic, non- flammable, and can be handled according to the general chemical transportation regulations. Store in a dry, cool, ventilated place. Avoid direct sunlight and rain during transportation. The storage and transportation temperature should not be higher than 40 °C.  Product shelf life: Under the specified storage and transportation conditions, the shelf life is one year.

Product Name: Fatty Alcohol Ethoxylates CAS 37335-03-8 Pesticide Emulsifier AEO/JFC Series Synonyms: Fatty Alcohol Ethoxylates Ethoxylated Fatty Alcohols Fatty Alcohol Polyglycol Ethers Fatty Alcohol Polyoxyethylene Ethers Polyethylene Fatty Alcohol Ethers Fatty Alcohol Polyglycol Ethers Chemical Composition: Fatty Alcohol Ethoxylates+3EO,5EO,7EO,9EO CAS Register No.：37335-03-8 Molecular Weight:  Not Available. EINECS No.Not Available. HS Code:34021300 We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Properties and Uses: 1. Fatty Alcohol Ethoxylates is colorless transparent liquid or white cream.  2. Soluble in water and many kinds of organic solvents.  3. It has good emulsification, dispersion, moisturing and decontamination capacity; Resistant to acid and alkali; Can be used to produce emulsifier, defoamer, solutizer and degreaser. Packing and Transport: Fatty Alcohol Ethoxylates is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing. Storage: Storage period: 1 year. Should be kept in dry and ventilated place

Tristyrylphenol Ethoxylates Synonyms: Tristyrylphenol Ethoxylates Ethoxylated Polyarylphenol Polyethylene Glycol Mono(Tristyrylphenyl)Ethers Chemical Composition: Tristyrylphenol Ethoxylates +15EO,16EO,19EO,20EO,36EO,54EO CAS No.:99734-09-5  HS Code: 34021300.90 Molecular Weight: Not available. Molecular Formula: C30H24O.(C2H4O)n  Chemical Code: CC5-CZ40 EINECS No. Not available. Structural Formula: Not available. We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Properties and Uses: 1. Light yellow liquid or white cream. It becomes solid when the temperature is low. 2. Soluble in water and many kinds of organic solvents. 3. It has good emulsification, decontamination and moisturizing capacity. And it is an important hydrophilic group for compound agrochemical emulsifier. Packing and Transport: This product is flame resisting and nontoxic which can be shipped as an ordinary chemical product. Upload and handle with care to avoid collision.   As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc…  Storage: Quality guaranty period for the product is 1 year. Should be stored in dry and ventilated place.

It has good emulsification, moisturing, dispersion, detergency and solubilization capacity and high hard water and alkali resistance capacity. It can be widely used in cleansing, pesticide, papermaking, petroleum, leather process industries. PRODUCT DESCRIPTION Product Name:    Alkylphenol Ethoxylates(APEOs) Pesticide Emulsifier NP/OP/TX Series    Synonyms:    Alkylphenol Ethoxylates(APEOs)  Alkyl Phenol Ethoxylates(APE) Alkylphenol Polyoxyethylene Ethers Nonyl Phenol Ethoxylates(NPE) Octyl Phenol Ethoxylates(OP)    Keywords:   Pesticide Inert Ingredients pesticide emulsifier NP/OP/TX series,APEOs, APE surfactants, alkylphenol ethoxylates, Alkylphenol Polyoxyethylene Ethers,NPE surfactants,NPEOs,NP-NPEO, nonyl phenol ethoxylates,OP, nonionic surfactants,surface active agent, agrochemical auxiliary agents,pesticide inert ingredients,agrochemical intermediates,agrochemical adjuvants    We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Property and Uses:    1.It’s transparent liquid or white cream or plate 2.Soluble in water and many kinds of organic solvents. 3.It has good emulsification, moisturing, dispersion, detergency and solubilization capacity and high hard water and alkali resistance capacity. It can be widely used in cleansing, pesticide, papermaking, petroleum, leather process industries.   

It has good performance in emulsification, dispersion and moisturizing. It’s an important monomer in pesticide emulsifiers.Packing and Transport:Alkylphenol Formaldehyde Resin Ethoxylates is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. PRODUCT DESCRIPTION Product Name: Alkylphenol Formaldehyde Resin Ethoxylates Pesticide Emulsifier 700# Series Chemical Composition: Alkylphenol Formaldehyde Resin Ethoxylates CAS Register No.:Not Available. Molecular Weight:  Not Available. Molecular Formula: Not Available. EINECS No.Not Available. HS Code:34021300 Structural Formula:Not Available. We have manufacturing plants annual capacity 5000tons for CDBS(hydrous/anhydrous calcium salts); 5000tons capacity for nonionicsurfactant;10000tons capacity for Polycarboxylicacid cement water- reducer. Anionic Surfactant, Calcium Dodecyl Benzene Sulfonate CAS No.26264-06-2, Calcium Pheny Sulphonate 70 %, calcium salt, Ca LAB Sulfonate, oilfield auxiliary chemical, Phosphate Esters, Nonionic Surfactant, Organic Phosphorus Emulsifier, Castor Oil Ethoxylates, Fatty Alcohol Polyglycol Ethers, Polyethylene Fatty Alcohol Ethers, Pesticide Inert Ingredients, Polycarboxylate, Polycarboxylate Superplasticizer, Polycarboxylate Superplasticizer For Cement. Properties and Uses: 1.Alkylphenol Formaldehyde Resin Ethoxylates is light yellow or yellow liquid and it turns to wax like solid when cooled.  2. Soluble in water and many kinds of organic solvents. 3. It has good performance in emulsification, dispersion and moisturizing. It’s an important monomer in pesticide emulsifiers.Packing and Transport:Alkylphenol Formaldehyde Resin Ethoxylates is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing. Storage: Storage period: 1 year. Should be kept in dry and draughty place.

Micronized wax is a specially processed wax powder with an extremely fine particle size. Due to its unique physical form and chemical properties, it has extensive and significant applications across numerous industrial sectors and everyday products. Paint and Ink Industry Slipperiness Enhancement and Scratch Resistance: When incorporated into paints and inks, it forms a uniform, fine wax film on the cured coating surface. This significantly reduces the coefficient of friction, enhancing surface smoothness, scratch resistance, and abrasion resistance. Commonly employed in high-end furniture lacquers, automotive paints, and electronic casing coatings. Anti-adhesion: Prevents coating films from sticking together during stacking or rolling, particularly suitable for coil coatings, can coatings, and leather finishes. Matting effect: By creating microscopic surface roughness through micro-wax particles, light scattering is induced to achieve a matt or semi-gloss finish. Used in formulating matt paints and matt inks. Texture and tactile enhancement: Can impart distinctive surface sensations to coatings, such as silk-like or velvety textures.