Electronics & Electrical

5W ~ 5000W Good high temperature load characteristics, strong overload capacity, moisture resistance, vibration resistance, and high power.

2W~200W Good moisture resistance, low noise, small temperature coefficient, large load power and high insulation.

1/4W 1/2W 1W 2W 3W 4W 5W 7W 10W The function is the same as the wire-wound resistor, and it can be installed by the chip mounter, which is more efficient and less costly.

1/8W 1/6W 1/4W 1/2W 1W 2W 3W 4W 5W Metal film resistors are the most widely used resistors so far. They have high precision, stable performance, simple and lightweight structure. They play an important role in the electronics industry and military aerospace fields with high precision requirements. They use high-temperature vacuum coating technology to tightly attach nickel-chromium or similar alloys to the surface of the porcelain rod to form a film, and then cut and adjust the resistance value to achieve the final required precision resistance value, then add appropriate joint cutting, and coat the surface with epoxy resin for sealing and protection.

1/4W 1/2W 1W 2W 3W 4W 5W It can be made into F type, FK1 type, FK2 type, FKK type, M type, MB type and MK type.

1/4W 1/2W 1W 2W 3W 4W 5W Glass glaze resistors are made of metal oxides such as silver, rhodium, ruthenium and glass glaze adhesive mixed into a slurry, coated on a ceramic frame, and sintered at high temperature. At present, resistors are mostly made of ruthenium oxide and glass glaze adhesive. Metal glass glaze resistors are available in ordinary and precision types. This type of resistor is resistant to high temperature, has good moisture resistance, good stability, low noise, small temperature coefficient, and a large resistance range. ① Moisture resistance, temperature resistance, and good stability. ② Wide resistance range, ranging from 4.7Ω to 200MΩ. ③ The rated power is generally 1/8W, 1/4W, 1 I2W, 1W, 2W, and the high-power type is 500W. ④ Low noise and good high-frequency characteristics. ⑤ Small size and light weight.

1/8W 1/6W 1/4W 1/2W 1W 2W 3W 4W 5W Carbon film resistor is a kind of film resistor. It is made by high temperature vacuum coating technology to attach carbon tightly to the surface of porcelain rod to form carbon film, then cut with appropriate joints, and apply epoxy resin on the surface for sealing and protection. Its surface is often coated with green protective paint. The thickness of carbon film determines the size of resistance, and the resistor is usually controlled by controlling the thickness of film and cutting grooves. Carbon film resistor is also called "thermally decomposed carbon film resistor". It is a kind of thin film resistor in which carbon is deposited on the substrate by high temperature thermal decomposition of hydrocarbon in vacuum. It is low in price, stable in performance, and has a wide range of resistance and power.

1/4W 1/2W 1W 2W 3W 4W 5W The resistance range of metal oxide film resistors is 1Ω~200kΩ. This type of resistor is made by decomposing and depositing a hydrolyzed metal salt solution (such as tin tetrachloride and antimony trichloride) on the surface of hot glass or ceramic. The performance of resistors varies greatly depending on the manufacturing conditions. The main characteristics of this resistor are high temperature resistance, an operating temperature range of +140~235℃, overload use in a short time, a resistance temperature coefficient of ±3×10-4/℃, and good chemical stability. This resistor has a low resistivity, and the resistance of a low-power resistor does not exceed 100 kilo-ohms.

1/4W 1/2W 1W 2W 3W 4W 5W Wirewound resistors are a type of fixed resistor. Wirewound resistors are made of resistance wire wound on an insulating frame. Resistance wire is generally made of nickel-chromium, manganese-copper and other alloys with a certain resistivity. The insulating frame is made of ceramics, plastics, metals coated with insulating layers and other materials into various shapes such as tubular and flat. The resistance wire can be wound on the frame in one layer or multiple layers according to needs, or non-inductive winding can be used. Wirewound resistors are mainly used for voltage division, voltage reduction, current shunting and load in AC and DC circuits such as precision instruments, telecommunication instruments, and electronic equipment.

The fusible resistor is applied to safety circuit in a wide range of electronic sets. Complete flame proof construction. Resistance range :0.1Ω to 1KΩ Resistance tolerance :±5% There are 5 color bands on surface. The 5th band is in white color means fusible metal film resistor.

Advanced Features and Controls: The Intelligent Light Control Solar Garden Lamp features timing and remote control functionality, allowing users to adjust the lighting schedule and intensity to meet their needs. It also supports dimming, ensuring energy efficiency and flexibility. Long-Lasting and Reliable: With a lifespan of 50,000 hours and a 3-year warranty, this solar garden light is a reliable and long-lasting solution for outdoor lighting needs, providing users with peace of mind and cost savings. Name Solar Garden Light Outdoor Solar panel Polycrystalline Silicon Charging time 4-6 Hours Battery Lithium Battery Lighting mode Light Control CCT 2700-6500k Optional Waterproof IP65 Outdoor

Products Description The FDPC-14AA-XX serires DisplayPort 1.4 AOC-Active Optical Cableare provide an ideal solution for various applications requiring uncompromised Ultra High Definition video at extended distances. With a transmission range of up to 150 meters, these cables flawlessly transmit uncompressed, full Ultra HD 8K video signals. The all-in-one cable design eliminates the need for additional components, ensuring a plug-and-play experience without signal loss or degradation. Simply connect the cable between your source and display, and enjoy seamless audio/video transmission. The cable is unidirectional, connecting the source side to the source and the display side to the display. Highlights feature: • High-Quality Resolution: Supports 8K (7680×4320)@60Hz resolution, 5K (5120×2880)@60Hz, 4K@120Hz, backward compatible. • High Bandwidth: 32.4Gbps capacity,High Bit Rate 3 (HBR3). • Lossless Transmission: Delivers 8K@60Hz visuals, VR, and 3D display signals over long distances. • Fast Refresh Rate: 120Hz at 4K resolution for crisp, sharp images; higher rates at lower resolutions. • Dynamic HDR: Optimizes contrast, depth, brightness, and color gamut on a frame- by-frame basis. • Enhanced eARC: Simplifies connectivity and audio optimization for multiple components. • High-Quality Audio: Supports up to 192kHz, 24-bit, uncompressed 5.1 and 7.1, Dolby lossless formats, and 32-channel audio. • VRR for Gaming: Fluid gameplay with minimal lag, judder, and frame tearing. • Advanced Features: Supports EDID, self-detecting function, ALLM, QMS, and QFT. • Durable Construction: Zinc-alloy housing, corrosion-resistant gold-plated connectors. • EMI Resistance: High resistance to electromagnetic interference, ensuring a safe, radiation-free environment • Customizable: Up to 70m maximum length (30m max for eARC), custom length, logo, and packaging available applications: , • LED Digital signage. • Home Theater Applications (Blue-Ray, 3D Video, Projectors, DVR, Game Consoles and Computers). • Medical imaging equipment. • Airport boarding video information system. • Security monitoring system. • Conference Room Video Equipment. • TV Broadcast Station. FAQ Q1: Are you a factory or trading company? A1: Shenzhen Fiberlink Tech Co., Ltd is a manufacturer specializing in fiber optic connectivity solutions. Q2: Where is your factory and can I visit? A2: Serious customers are always welcome to visit us at: 5th Floor, Building One, Lebao Industrial Zone, Guangqiao Road, Guangming District, Shenzhen, Guangdong Province, China. Q3: Can I get a sample to test the quality? A3: We are happy and confident to provide samples for testing and approval. Regular items in stock can be shipped within 24 hours, while customized items may take longer. Initially, customers are requested to pay the express fee, which can be deducted from the cost of bulk orders. Q4: What’s your warranty? A4: As a reputable manufacturer, we offer worry-free technical support and a 12- month quality assurance. Extended repair services are available for an additional fee. Q5: What payment methods do you accept? A5: We accept T/T (Bank Transfer), Western Union, Money Gram, PayPal, and Alipay. Q6: What are the trading terms? A6: We offer EX-WORKS, FOB, CFR, CIF, DDU, and DDP terms. We have reliable and cost-effective solutions for DDP (Delivery Duty Paid) to most countries in North America, Europe, and APAC, helping numerous customers save time and costs. Q7: What shipping methods do you offer? A7: International express: DHL, UPS, FedEx, TNT. You can provide your express account or we can quote you with our rates. By Sea: Shanghai, Shenzhen, Hong Kong,Ningbo Port. By Air: From Shenzhen, Guangzhou, Hong Kong, Shanghai to global destinations. By Rail/Truck: From Shenzhen,Zhengzhou,Xi'an,Chongqing,Chengdu,Uru , muqi to Central Asia, Eastern Europe, Western Europe etc. Q8: Can we print our LOGO/Brand on the products? A8: Yes, we use laser marking to customize your logo on zinc alloy, plastic, and metal housings at no extra cost.

Minimum Order: 1 bags

Economical UFO type LED High Bay Light, the radiator is made of high quality aluminum alloy die-casting, has a very good heat dissipation effect, the use of high luminous efficiency LED chips, the whole fixture efficiency reaches 190lm/W, here are high lumen high bay lights, as an industrial lighting lamp, it can be combined with motion sensor and daylight sensor to achieve the maximum energy saving. · 50 watts to 200 watts · High bay light Light Efficiency up to 150lm/w · Black color body · IP66&IK10 · Special module design easy for maintenance · Customized frame is available · Recessed mounting · CE, ROHS certified

High mast LED Stadium Flood Light and LED Sports Lighting that is great for indoor and outdoor sports arenas and stadiums. LEDs offer a number of advantages over traditional metal halide and HID fixtures.  Hongzhun Waterproof IP65 Warehouse Outdoor Stadium Light Aluminum 200w~1200w AC LED Flood Light • The Stadium Led Flood lamp body adopts high purity aluminum die-casting and aluminum profile. • Excellent heat dissipation design. • Convenient operation of open connection cavity, efficient and energy-saving drive power supply. • Which can be lit at night to illuminate the whole darkness LED Flood Light   Name LED Stadium Led Flood Light Light source SMD3030 or SMD5050 Voltage AC85-265/AC100-240V Waterproof IP66 Lifetime > 50,000h Beam angle 25°、60° Material Aluminum Warranty 3 years Luminous efficiency 150-170LM/W PF >0.95 IK 08 Color 3000-6500K Working temperature -45~65°