Electronics & Electrical

HYJL-12 high voltage metering cabinet (box) (hereinafter referred to as "floor type metering box "), suitable for AC three-phase AC 50Hz, rated voltage 10kV power system as a high voltage cable into the user's electric energy metering, can be installed in parks, residential communities, industrial and mining areas of the roadside lawn, can directly open the door to see the bottom of the meter and local circuit breaker switching operation. The floor type measuring box is mainly composed of vacuum circuit breaker, cast type combined CT, lightning arrester, live display and intelligent control device, etc. The measuring mode is three-phase three-phase system and three- phase four-wire system, which can be configured with zero sequence current transformer for grounding protection. The floor type metering box conforms to GB/T 1984-2014 "High voltage AC Circuit breaker", DL/T 402-2016 "High voltage AC Circuit breaker", DL/T 403-2000 "12kV~40.5kV High voltage vacuum circuit breaker ordering technical conditions", GB/T 17201-2007 "Combined transformer" and DL/T 721-2013 "Distribution automation system remote terminal" and other technical standards. High Voltage Switchgear Cabinet Normal operating conditions Altitude: not more than 1000m, if the altitude is higher than 1000m, the rated insulation level should be corrected accordingly; Ambient temperature: upper limit +45℃, lower limit -40℃, maximum daily temperature difference 25K; Humidity: average daily relative humidity ≤95%, average monthly relative humidity ≤90%; Solar radiation intensity: 0.1Wcm2; Wind speed: 34m/ s; Wind pressure: 700Pa; Pollution grade: e level; Ice thickness: ≤10mm; Withstand earthquake resistance: horizontal acceleration 0.3g, vertical acceleration 0.2g.  Structural characteristics Small footprint, less investment, cost-effective; With automatic power supply, data processing, display, storage, alarm and automatic power off functions; Equipped with anti-theft device, can reduce unnecessary power loss for the power system; With pre-payment function to avoid users defaulting on electricity bills; The box is stainless steel floor structure, beautiful appearance and easy installation. https://www.cntdelectric.com/

Main circuit scheme number Auxiliary circuit scheme number Regular service condition The ambient air temperature shall not be higher than +40°C and not lower than -5°C, and the average temperature within 24 hours shall not be higher than +35°C. When the ambient air temperature is at +40°C, the relative humidity shall not exceed 50%. At lower temperatures, the relative humidity may be higher, for example, 90% at +20°C. However, due to temperature changes, moderate condensation may occur occasionally. It is for indoor use, and the altitude of the installation site shall not exceed 2000m. It should be installed in a place without severe vibration, shock, and where electrical components are not corroded. MNS Low Voltage Draw-Out Switchgear Structural Features This switchgear has been technologically improved based on its original design to better suit China's national conditions. The cabinet body uses C-shaped profiles with a modulus of 25mm, which are connected by connectors to form various frame structures and drawer units that can meet different requirements. In the MCC cabinet, high-strength flame-retardant engineering plastic components are used to make the safety performance more reliable. At the same time, foreign functional boards are modified and combined with a modulus of 200mm, making it more conducive to the design requirements of mixed PC and MCC cabinet bodies. The extraction unit (withdrawal unit) and the cabinet body are equipped with a reliable interlocking device to prevent load-breaking under energized conditions, improving safety. In addition, the cabinet body is generally assembled from cold-rolled steel plates after passivation treatment. It can also be made of aluminum-zinc coated steel plates according to different user requirements.

This Fall Restraint (Anchor Point Tool) adopts moisture-proof small-mouth closed-cell foam filled high-strength epoxy glass fiber tube as the insulating body, equipped with U-shaped hanging ring, and light weight and high strength aviation aluminum pole base and nylon ratchet holding rod locking system. This product can be used to fix the safety belt of line workers, and connect the anti-dropping device or light industrial equipment. Features: • The design meets the load of 250kg, and the insulation distance is 160mm; •Large U-shaped bolts are convenient for the operator to pass through the lifting ring easily; • 50mmx1300mm nylon belt ratchet assembly can be quickly and easily connected to the pole

Minimum Order: 10 long tons

Telescopic high-voltage conductor separated insulated pole is used to support different phases of conductors in live line work. The insulated support pole can be adjusted according to the line distance, it contains three fast conductor clip, which can hold up to three conductors。Hold on hot wire and release wire are simple and quickly.The main rod is made of high strength epoxy resin and pultrusion insulated tube. voltage resistance: 100kV/300mm, high mechanical strength, good insulated performance. It's safe and convenient to use.

Minimum Order: 10 long tons

Our company grounding copper wire made by 0.2 mm diameter high-purity oxygen-free electrolytic copper wire multi-strands woven, copper purity of 99.9% , external by transparent PVC pipe insulation protection. The product has low resistance and large current carrying capacity, and is a special cable for portable short-circuit grounding wire in power system. Advantages: High copper content, purity of 99.9% . High conductivity, low resistance, low loss, strong current load. Covered with transparent insulating layer, waterproof, sunscreen, antifreeze, wear-resistant, anti-aging. Smart Printing: customizable, not easy to fade.

Minimum Order: 10 long tons

TID POWER insulated clamp rod is made of small diameter high strength epoxy insulated pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The insulated clamp pole is mainly used for clamping or fixing the conductor, and the maximum can be clamped 240mm conductor. Special attention: The Hand is forbidden to hold above the limit when using.

Minimum Order: 10 long tons

The shotgun stick is mainly used for live installation of wire clamps and grounding wire clamps, and is also suitable for installation of overhead and underground circuits and various terminal fittings. The shotgun stick is mainly characterized by good work applicability and convenient operation. The rod body is made of high-strength epoxy resin knitted + pultrusion tube , and all products have passed the power frequency test of 100kV/300mm. All insulated parts of the shotgun stick are easy to wipe clean for easy maintenance and do not require on-site disassembly for cleaning, The shotgun sticks are available in orange and yellow colors and are available in single type or sectional type.

Minimum Order: 10 long tons

Switch Sticks also named disconnect sticks, used for opening and closing disconnect switches or cutouts and also used for installing and removing open-link fuse links. Switch stick are made of foam filled epoxy fiberglass tube and cast bronze in 3 types : standard Prong head ,Heavy duty prong head or insulation prong head. It is also can be made by customer ordered head.

Minimum Order: 10 long tons

Round telescopic insulation cargo height measuring rod is metric scale, the main insulation rod is made of high strength epoxy glass tube, the product has excellent electrical and mechanical properties, the height of the rod light weight, easy to operate, can be measured from the ground height of goods, but also the height of overhead power lines, communication lines, etc. Reading method: Pull out from the joint of the crossbar one section at a time, stretch to the point where the two sections meet, make the scale line between the two sections align, and the locating pin will pop out automatically until the crossbar is on the object to be measured, then the eye and the elevation ruler outside the base rod on the upper end of the rod button to maintain a level, the number shown above is the height of the measured object value. Closing method: After using the goods stick ruler, hold the thick section of the bottom handle with the left hand, press down the pin with the thumb, hold the upper western section with the right hand, push back while twisting the edge, loosen the chimera of the two sections in turn, take it back section by section

Minimum Order: 10 long tons

The DEWALT MAX XR Lithium-Ion Jig Saw features 4-position orbital action for cutting control and lever-action keyless blade change for quick and easy blade changes. Powered by high-capacity XR 4.0Ah lithium-ion batteries for extended run time. Kit includes jig saw, one 20V MAX XR premium Li-ion battery, charger, jig saw blade and kit box. What's Included (1) Jig saw (1) 20V MAX XR premium Li-ion battery (4.0Ah) (1) Charger (1) Jig saw blade (1) Kit box Features + Benefits All-metal lever-action keyless blade change allows for quick and easy blade changes All-metal keyless shoe bevel with detents at 0°, 15°, 30° and 45° provides versatility for easy bevel cutting 4-position orbital action provides control of cut quality and speed Adjustable dust blower keeps line of cut clear of chips Variable speed 0–3000 SPM for versatility in a multitude of materials and applications Anti-slip comfort grip for increased comfort and control Accepts T-shank jig saw blades for professional results Key Specs Item# 41601 Brand DEWALT Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 12.25 lbs Cordless Yes Volts 20 Battery Type Lithium-ion Batteries (qty.) 1 Stroke Length (in.) 1 Strokes Per Minute (SPM) 0–3,000 Total Orbital Settings 3 Variable Speed Yes Blade Included Yes Trigger Lock No Tool Weight (lbs.) 5.1 Storage Type Plastic case More Information Please Visit our website Official ATLAS DEPOT MACHINERY for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

The DEWALT® Fixed Base Router is an excellent woodworking tool featuring a 12 Amp motor with the power to rout smoothly through the toughest hardwoods. Electronic variable speed with full feedback control for constant speed under load from 8000–24,000 RPM and soft start to reduce start-up torque for enhanced control. Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking. What's Included (1) Motor pack (DW618M) (1) Fixed base (DW6184) (1) Plunge base (DW6182) (2) 1/4in. and 1/2in. collets (1) Wrench (1) Large hole sub-base (1) Vacuum adapter (1) Heavy-duty kitbox Features + Benefits Micro-fine ring depth stop in 1/64in. increments Spindle lock Integral, through-the-column dust collection collects 95% of the dust Quick-release motor latches for fast and easy motor pack removal for bit and base changes Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance and control Dust-sealed switch provides durability and long switch life Heavy-duty, precision-machined, die-cast aluminum base and motor housing for durability Nickel-plated motor housing for a smooth, long-lasting depth adjustment Right or left switch and cordset location provides the ability to have the switch in your right or left hand Self-releasing slotted collets for better bit retention and eliminating frozen bits 5-position adjustable turret stop assists in stepped or repeated plunge cuts Micro-fine depth adjustment on plunge base 5/128in. per turn for precise routing in veneer and inlays Key Specs Item# 399559 Brand DEWALT Manufacturer's Warranty 12 months parts / 12 months labor Ship Weight 12.0 lbs Base Type Fixed, plunge HP 2 1/4 Speed (RPM) 8,000–24,000 Amps 12 Collet Diameter (in.) 1/4, 1/2 Variable Speed Yes Storage Type Plastic case More Information Please Visit our website Official ATLAS DEPOT MACHINERY for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

Model NO.: UIYDDCP5555A3T4NF Type: Dual Directional Coupler Brand Name: UIY Freq. Range (GHz): 3.0~4.0GHz Insertion Loss(dB) : 0.4dB Nominal Coupling(dB) : 50±1.5dB VSWR Max: 1.3 Power: 300W Connector Type: N Female Dimension: 55×55×20mm Certification: ISO9001,ISO14001,RoHS Warranty: 1 year

Minimum Order: 1 bags

Lithium-ion heavy truck dual purpose battery is specially designed for applications that require both strong cranking power and low-amp cycling service to meet the extended auxiliary power needs of electrical accessories such as air conditioners.  Lithium-Ion Heavy Truck Starter Battery Special Features Longer service life: 5+ years of service life.  Extended parking time power supply: over 9 hours during the day and longer at night.  Faster charging: strong charging receiving capacity. Charging from 20% to 95% in just 1-2 hours.  Intelligent power management: BMS intelligent management keeps 20% of the minimum starting power to avoid excessive power loss. Instant low-temperature starting: ultra-low temperature (- 40 ℃) Zero Delay continuous starting. High and low temperature resistance: discharge working temperature range "- 40 ℃ ∽ 65 ℃". Password anti-theft and positioning: double security with password and Bluetooth protections.

Super capacity  High deep cycle capability Over-charge resistance  High rate discharge Vibration resistance. Application of Marine Battery Camel Battery offers customized solutions for marine applications, providing personalized product selection and design expertise. Our marine battery is designed with waterproofing, dust resistance, and a strong battery structure to offer expertise for your solution. The marine battery from Camel fits for starting, lighting, communication, emergency and other uses in vessels. Type Part No. CCA (-18℃) RC(min) Dimensions(mm) L*W*H Terminal (Layout/Type) Hold Down Weight (kg) MRV24 90D26 800 155 256*170*246 1/Marine B00 20.6 MRV27 70MF 800 160 305*171*246 1/Marine B01 21.8 MRV31 G31(B) 950 209 332*174*236 1/Marine B01 27.2 MRV24DP 90D26 625 157 256*170*246 1/Marine B00 20.9 MRV27DP 70MF 700 213 305*171*246 1/Marine B01 26.6 MRV31DP G31(B) 800 242 332*174*236 1/Marine B01 27.8