Electronics & Electrical

Model Number:UIYCC2525A5T6NF Frequency Range:5.0~6.0GHz Insertion Loss:0.4dB Isolation:20dB VSWR:1.25 Forwa , rd Power:300W Reverse Power:300W Connector Type:N-F Temperature:-20~+70℃ Dimension:25 , *25.5*18mm

Minimum Order: 1 bags

High Strength Foam filled Epoxy Resin Fiberglass Cross Knitting+ Pultrusion Insulation Tube was widely used for the live line tools and other insulation parts which need the better electrical performance and light weight. 1.Standard:GB13398, IEC 60855 2.Material:Fiber glass and epoxy resin. 3.Process:Continuous knitting fiberglass + pultrusion+foam fill process

Minimum Order: 1 bags

High Strength Epoxy Resin Fiberglass Cross Knitting+ Pultrusion Insulation Tube was widely used for the live line tools and other insulation parts which need the better electrical performance and light weight. 1.Standard:GB13398, IEC 60855 2.Material:Fiber glass and epoxy resin. 3.Process:Continuous knittingfiberglass + pultrusion process

Minimum Order: 1 bags

High Strength Costomized Insulating Solid Rod is made of High strengh fiberglass glass reinforced epoxy resin with Polymer Reinforcement and Toughening Agent .We use continuous pultrusion with knitting fiberglass technology in manufacture procss .The strength is about 1.2 times than standard insulation rod.The products fullfill The standard of IEC61109, IEC 60855 and GB13398.

Minimum Order: 1 bags

This is a simple, easy to use, portable glove inflator. The inflator provides a quality means of inspecting gloves in the field. The glove is secured to the inflator using a nylon strap and fastened with a hook and pile closure. Inflation is accomplished by pumping the bellows of the inflator against any surface.

Minimum Order: 1 bags

TID POWER multi-functional insulation clamp is made of small diameter high strength epoxy insulation pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The multifunctional insulating clamp is mainly used for gripping various tools on the live working line, mounting and fastening the shielding cover. Special attention: The Hand is forbidden to hold above the limit when using.

Minimum Order: 1 bags

TID POWER insulated clamp rod is made of small diameter high strength epoxy insulated pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The insulated clamp pole is mainly used for clamping or fixing the conductor, and the maximum can be clamped 240mm2 conductor. Special attention: The Hand is forbidden to hold above the limit when using. 219011 Total length mm:1500 Major rod dia.mm:26 Minor rod dia.mm:16 Max. Clamp wire dia.mm:240 Weight kg:1.9 219012 Total length mm:2500 Major rod dia.mm:26 Minor rod dia.mm:16 Max. Clamp wire dia.mm:240 Weight kg:2.5

Minimum Order: 1 bags

The wire pre-connecting insulating mounting rod is mainly used to fasten the lead line on the main lead line when the lead line is connected in live operation, which reduces the operation risk caused by the sloshing of the lead line and the lead line when the lead line is fixed in the clamp, easy and fast operation, high security. When working, just put the drain wire into the wire clip at the lower part of the operating head of the mounting rod in advance, tighten the screw to lock the wire, then hang the installation on the main wire, and then pull the mounting rod down, the lower part of the operating head of the installation bar will move up to the main line, and then clockwise screw the installation bar, the top of the drainage line clamp will lock the main line. After installing the clamp connecting the main lead to the drain line, the gun operator can be used to loosen the drain line by twisting the clamp lock ring of the lock drain line on the mounting rod. Then turn the mounting rod counterclockwise, loosen the locking mechanism of the mounting rod on the main lead wire, and push the mounting rod upward. The wire clamp at the lower part of the operating head of the mounting rod will move down, loosen the clamping on the main lead wire, and withdraw the mounting rod, live wire connection work completed.

Minimum Order: 1 bags

The round teles coping hot sticks have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks. The sticks are short,so that it can be easy carried on most trucks.The spring-loaded buttons can keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons into right place to make sure the linemen well done the job. 1. Applied Standard: IEC60855, ASTM F711. 2. Parts Material：Universal head with hook: Aluminum alloy in nature color Tube : Top section: Foam filled fiberglass tube in yellow, Other sections: Fiberglass tube in yellow Handle: Insulation rubber in black Bag: Water-proof Nylon bag in green

Minimum Order: 1 bags

Product Features ： Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from a victim. Indoor and outdoor use. Product Character ： 1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards Top tube - Φ28 round foam filled tube to prevent penetration of humidity Outer tube - pentagonal tube is not easy to slip and increases torque Environmentally friendly paint free process can avoid paint damage or paint peeling 2. Hook: Φ18 steel tube, U shaped fitting, can be used for high voltage detector. 3. Dielectric strength: 100kV/300mm 4. Adapter: Insulation material for universal end fitting 5. Push button: Simply operation 6. Handle: Rubber material to protect the tip

Minimum Order: 1 bags

Product Features ： Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from a victim. Indoor and outdoor use. Product Character ： 1. Fiberglass Stick: meets ASTM F711 , IEC 60855-1 and IEC61235 standards Tube - Φ32 tube with humidity-proof seals on each end Environmentally friendly paint free process can avoid paint damage or paint peeling 2. Hook: Φ10 steel tube, U shaped fitting 3. Dielectric strength: 100kV/300mm 4. Adapter: Insulation material for universal end fitting 5. Push button: Simply operation 6. Handle: Rubber material with insulating ring Products Size: 216101 Sections:1 Length (mm):1790 Hook size（mm):430 Load（kg):100 216102 Sections:1 Length (mm):2290 Hook size（mm):430 Load（kg):100 216103 Sections:1 Length (mm):2790 Hook size（mm):430 Load（kg):100

Minimum Order: 1 bags

The shotgun stick is mainly used for live installation of wire clamps and grounding wire clamps, and is also suitable for installation of overhead and underground circuits and various terminal fittings. The shotgun stick is mainly characterized by good work applicability and convenient operation. The rod body is made of high-strength epoxy resin knitted + pultrusion tube , and all products have passed the power frequency test of 100kV/300mm. All insulated parts of the shotgun stick are easy to wipe clean for easy maintenance and do not require on-site disassembly for cleaning, The shotgun sticks are available in orange and yellow colors and are available in single type or sectional type.

Minimum Order: 1 bags

TUV certificated bridge-rectifiers, ensure electrical safety UV protecting and high-transparent PVC Double-side lighting, high brightness LED source, lifetime>30000hours Super-flex PCB,  can be easily installed, or wrapping on trees and column. Protection grade IP65, suitable for outdoor decoration lighting Maximum length upto 100m, every 1m cuttable,  perfect for long-distance projects LED Rope Light Packaging & Delivery 1. Trade Term: Ex-work, no tax. 2. Delivery date: 30 work days after all requirments comfirm. 3. Payment Terms:T/T 30% before production,banlance before delivery. 4. Packing: Factory general exporting packing. 5. Shipping Marks: Customer Required sticker on 2 sides. Zhongshan Joineonlux is a renowned LED strip lights manufacturer. , we pride ourselves on innovation and quality. Our LED strip lights are CE, RoHS, and ISO9001 certified, ensuring reliability and excellence.

TUV certificated bridge-rectifiers, ensure electrical safety UV protecting and high-transparent PVC Double-side lighting, high brightness led source, lifetime>30000hours Super-flex PCB,  can be easily installed, or wrapping on trees and column .  Protection grade IP65, suitable for outdoor decoration lighting Maximum length upto 100m, every 1m cuttable,  perfect for long-distance projects  AC110V Series COB LED Strip Light Packaging & Delivery 1. Trade Term: Ex-work, no tax. 2. Delivery date: 30 work days after all requirments comfirm. 3. Payment Terms:T/T 30% before production,banlance before delivery. 4. Packing: Factory general exporting packing. 5. Shipping Marks: Customer Required sticker on 2 sides.