Offers to Sell

Industry Aluminium Foil One of the most important applications of Industrial Aluminum Foil is insulation. For example, it is used as an insulation layer for pipelines and pipelines Foil shielding is a type of shielded cable that uses a thin layer of aluminum and polyester backing to wrap the cable to improve durability. The foil shield works in series with the tinned copper shielding wire to ground the shield.   Jumbo Roll Aluminium Foil Technical Data: Product Industry Aluminium Foil Contract No.   Dimension (mm) 0.06-0.2 Alloy & Temper 8011-O Techuique Standard GB/T3190--1996/EN   Chemical Composition(%)   Si Fe Cu Mn Mg Cr Ni Zn Ti Others Al Standard 0.20~ 0.35 0.1 0.1 0.45~0.9 0.1 - 0.1 0.1 0.15 Rest 0.6 Notice:Aluminum sheet not contains Pb、As and other Virose elements Mechanical Property   State Tensile Strength（Mpa） Strength(Mpa) Elongation% Cup Bulge Standard T6 ≥205 ≥180 ≥8 -

Aluminium Foil House Hold Jumbo Foil The aluminum foil roll will bring versatility to our kitchen and bring us a great cost performance. Can be used for grilling, retort cooking and oven. Our aluminum foil paper is of high quality. The thick aluminum foil is resistant to high temperature, not easy to break, effectively prevents oil stains, is easy to clean, and reduces cleaning troubles.   Household Aluminium Foil Technical Data: Product Aluminum Foil Contract No.   Lot No.   Dimension (mm) 0.06-0.2 Alloy & Temper 8011-O Piece Count   Techuique Standard GB/T3190--1996/EN Weight(kg)   Chemical Composition(%)   Si Fe Cu Mn Mg Cr Ni Zn Ti Others Al Standard 0.4~0.8 0.5~1.0 0.10 0.10 0.10 0.10 - 0.10 - 0.15 Remain Notice:Aluminum foil not contains Pb、As and other Virose elements Mechanical Property   State Tensile Strength（Mpa） Strength(Mpa) Elongation% Cup Bulge Standard H-O 50~105 _ 1 -

Aluminium Circle 1100 Customizable options *Alloy:1100 *Temper:H12, H14, H16, H18, H(O), H22, H24, H26, H28 *Thickness:0.3- 6.0mm, Diameter::150-1800mm, *Surface:nauture/plain or painted or anodized or brushed or in mirror. *Thickness tolerance:+/-2% or according to customer’s request *Width and Length toloerance:min.+/0.5mm *Kinds of surface:nature, silver, mirror, painted, brushed, anoized, etc. *MOQ:About 0.5tons each size   Aluminium Circle 1100 Technical Parameter ALLOY Si Fe Cu Mn Mg Zn Ti Others Al Single Total 1100 0.95 0.05-0.2 0.05 / 0.1 / 0.05 0.15 99.00   The mechanical properties of 1100 grade aluminum discs are slightly higher than those of 1050 and 1060 aluminum discs, al purity is min.99%.

The main alloys for 1000series aluminium coil including A1100, A1050, A1060 , A1235 and A1070. 1000 series premium aluminum coil have advantages of easy processing, stamping, spinning, good conductivity, low price, light weight, and excellent quality.Which is non-alloyed aluminium, have high puerity of aluminium, normally more than 99%, such as 99.5%min or A1050, 99.6% min.for A1060, 99.7min. For A1070 and 99% min. For A1100. 1000 series alumium sheets are widely used in fields such as cookware, utensils, traffic signs, industry manufacturing, building materials, and decoration materials For example, if you want to buy the building wall sheets, you can buy the A1100 aluminium plain sheets;if you want to buy the deep stamping materials, you can buy the A1050 aluminum sheet. If you need good conductivity, you can buy 1050, 1060 or 1070 aluminium sheets.Generally speaking, 1050 alu sheet or 1060 alu sheet or1100 alu sheet are cost-effective aluminium and very popular in the market.   Customizable options: *Alloy: 1050/1060/1070/1100/1235, Etc *Temper: H12, H14, H16, H18, H(O), H22, H24, H26, H28 *Thickness: 0.15- 6.0mm, width:150-2300mm, Length: max 12000mm *Usural Width: 500mm-2300mm *Surface: nauture/plain or painted or anodized or brushed or in mirror. *Thickness tolerance: +/-2% or according to customer’s request *Width toloerance:min.+/0.5mm *Kinds of surface:nature, silver, mirror, painted, brushed, anoized, etc. *MOQ:About 2tons each size

Buy 2024 BMC Kaius 01 THREE Road Bike from racyclesport store, because the purchase of products at racyclesport provides official genuine products and 100% money back guarantee. To purchase online visit us : www.racyclesport.com racyclesport.com selling Accessories, Helmets, Shoes, Components, Pedals, Saddles, Wheels, Frames, Road Frames, Triathlon Frames, Bikes. Price : USD 3,200.00 Min Order : 1 Pcs Lead Time : 7 Days Express Terms : Paypal, Xoom, Paysend, Remitly, Skrill, International Bank Transfer, Wise, Westernunion, Moneygram. Shipment : FedEx, DHL, UPS Product : 100% Product New Original and Ready in stock

Minimum Order: 1 bags

Air Damper RD-V118 Characteristics SOC Free, For Glove box, one-way Component Parts Less honorary seat: PC Upper cover: PC O-RING: Oil-emitting silicone Tie rod: PP Technical Requirements 1. Damping and Cushioning Direction: V - Unidirectional 2. Torque Testing Standard: 23±2°C, speed of 2400 r/min 3. Torque Range: 1.0-4.5 kgf.cm 4. Effective Damping Stroke: 60mm 5. Static High and Low-Temperature Requirement: -40°C to 90°C 6. Damping Durability Requirement: >20,000 cycles

Push Push Latch RD-08 Component Parts Less honorary seat: POM Lock cylinder: POM Deadbolt: POM Spring: stain , less steel Steel needle: stainless steel Technical Requirements 1. Storage Temperature: -40°C to 90°C, Operating Temperature: -35°C to +80°C. 2. At room temperature, the door lock operation pressing force should be 6N ±1. Insertion force into the opponent's mounting hole: ≤20N. Extraction force: ≥50N (subject to customer hole design). In the locked state, the clamping force applied to the opponent's component should be ≥20N. 3. Durability Requirements: (1) At room temperature, with the product initially in the locked position, wait for 0.5 seconds, then unlock. After unlocking, wait for 0.5 seconds. This constitutes one cycle of operation. The product should undergo more than 50,000 cycles of continuous testing without any functional failure. (2) At room temperature, under a continuous 6N load, follow the same steps as in (1) above, and the product should undergo more than 30,000 cycles of continuous testing without any functional failure.

Axial/Barre Damper RD-T138 Characteristics SOC Free, Screw, two-way, No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM O-RING: VMQ Oil:

Gear/Rotary Damper RD-T068/V068 Characteristics SOC Free, Screw, two-way, One-way,No angle limit Component Parts Less honorary seat: PC Upper cover: PC Rotor: POM Gear: POM O-RING: ,  VMQ Oil: silicone oil Durability Ambient temperature: normal temperature 23° Conditions: One rotation (1 turn) / 1s - pause / 1s - Reverse rotation (1 turn) / 1s - pause / 1s Lifetime: 30,000 times Technical Specifications Type 12 / / / Number of teeth 12 / / / Tooth width Product height 19 Module 1.05 / / / Pitch circle diameter Φ14.7 Pressure angle 20° / / / Material POM / / /

GTPG- (1-8) group buffing machine, mainly to meet the different requirements of surface finish of the heaters by heater factories. There are 1 - 8 groups buffing machines to choose. Polishing wheel is driven by motor high-speed rotation. The pressure wheel is driven by another motor through the reducer. The diameter can be adjusted conveniently, and the axis inclination of polishing wheel can meet the needs of different tube diameter.

Function: The machine combine with different functions on one machine. For example, machine combine pull plug + cut pin, machine combine trim+cut pin, machine combine cut pin+ pin chamfering, machine combine stretching+cut pin; To make sure machine maintain easy and with high efficiency, recommend machine with 2 functions on the machine. Main features: *** Max length of heater: 1000mm or according to order; *** Diameter to process: according to order; *** Function of the machine: 2 function according to order, such as pull plug+cut pin, trim+cut pin, cut pin+pin chamfering. *** Auto feed material, auto work, auto unload. Application: Tubular heater production; Information need for order GT-MF01 Pull Plug + Cut Pin Machine : *** Diameter of heater, such as 8mm; *** Max length of heater, such as 1000mm (Recommend heater within 2000mm) *** Function need, such as plug + cut pin; *** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Minimum Order: 1 bags

GT-LS202 Semi Auto Stretching Machine use to stretch long tubular heaters after shink, to let all heaters in same length. Function: Stretching heater after shrink, to make all heaters in target length. Main features: 1. auto or manual load heater, auto stretch, auto or manual unload finished heater; 2. with touch screen, easy debug the machine; Application: Tubular heater production Information need for order GT-LS202 Semi Auto Stretching Machine（for long heaters）: ** Diameter of heater; ** Length of heater, If for long heater, recommend load and unload heater by manual; ** Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Function: Shrink small hot runner heater, such as small round heater, small square heater, small flat heater. Main features: *** high efficient； *** Heater shrink with round edge, if need sharp edge, need to match with swaging machine ; *** with touch screen, easy debug the machine; *** machine in nice design small size. Application: Suitable for hot runner heater reducing, such as 2.2*4.2mm heaters; Information need for order GT-JYH12 Hot Runner CNC Shrinking Machine: Tube diameter before and after reduce, such as2.2*4.2mm Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)；

Minimum Order: 1 bags

Function: Reduce heater to increase density; Main features: 1. whole casting for body of the machine, ensure stable use in future.; 2. According to different diameters and orders, can make in uniform speed or un- uniform speed; 3. change related rollers can reduce different diameters heaters; 4. When the heater is blocked, the machine will automatic shutdown; 5. with small size, less noise, easy adjustment; 6. suitable for different materiall metal tubes; 7. change rollers, can reduce round, square, flat heaters. 8. can make in 12 station, 16 station, 18 station and 21 station. Application: Round heater reduce, such as tubular heater, cartridge heater, cable heater; Oblate heater reduce, such as railway heater reduce, fryer heater; Information need for order GT-JY16 roll reducing machine: Tube diameter before and after reduce, such as Φ10-8.5mm Length before reduce； Electrical supply (for example, 1 phase in 220v , 3 phase in 380V, 50hz)； speed: uniform speed or un-uniform speed;

Minimum Order: 1 bags