Offers to Sell

Coil Winding Machine Magnetic Tensioner Tensioner is a necessary factor for keeping consistent winding accuracy. Selecting better tensioner provides a sophisticated winding machine with best performance. Stabilized tensioner improves winding problems and enhances productivity. For example, stabilized tensioner causes no breaking of wire, raises operation rate, secures the value of resistance, and increases credibility of the product. Perfect layer winding leads to material cost cutting and easy adjustment. Therefore, time and cost for machine maintenance can be decreased. QIANHE Engineering has a wide range of tensioner types, from basic Magnetic type tensioners to servo motor tensioners. Descriptions The coil winding magnetic tensioner can be used for tension control during the winding process of various wires such as enameled wire, nylon wire, metal wire etc. It can be used to produce coils ,transformer ,stator , motor ,and some other products when specifically matching with the winding machine. Comparatively speaking, this tensioner has a simple structure and low cost. It is one of the most widely used tensioners on the market. Features: Because of the non-contact method, stable tension can be obtained on a long- term basis. 2. Adoption of ferrite magnet, is a variation of the product is very low. 3. Have excellent follow-up with respect to high-speed winding. 4. To back tension can be adjusted freely, the windings of the square-shaped bobbin, it is also compatible with rapid change in the winding speed, does not have to be disconnected. 5. Tension is easy to set by direct reading scale with dial. 6.Disconnection of course, disconnection detection device which automatically stop the winding machine even if the wire is no longer is standard equipment. Model List Describe Model Tension Range (g) Wire Range (mm) Tension Arm Weight (kg) MTQ Series Horizontal Type QH-MTQSS 6-120 0.025-.012 CX- 1#,2# 0.5 QH-MTQ300S 14-400 0.06-0.25 CX-3#,4#,5# 0.55 QH-MTQS 30-800 0.08-0.40 CX-6#,7# 0.58 QH-MTQM 300-1500 0.35-0.8 CX-8# 0.8 Wire pass drawing Lightweight Wire 0.35-0.8mm Coil Winding Tensioner For Produce Air Core Coils 0 Picture show: Lightweight Wire 0.35-0.8mm Coil Winding Tensioner For Produce Air Core Coils 1 Lightweight Wire 0.35-0.8mm Coil Winding Tensioner For Produce Air Core Coils 2 Lightweight Wire 0.35-0.8mm Coil Winding Tensioner For Produce Air Core Coils 3 Motor Industry Inner Stator Winding Mechanical Tensioner Qh - Mtas Wire 0.08-.040mm All products have to pass strict inspection before packing ! Why do you choose us? 1.100% manufacturer In hardware tools, the wire winding machine training industry has more than 10 years of experience, we have more than and 100 skilled workers. 2. competitive price One-stop service, from the material of die cutting process, production, QC, packaging, delivery. We are sure we produce all the goods. And the quality is 100% rest assured. Many customers are very happy to cooperate with us, because we can provide a more competitive price as a factory. 3,The best choice of material All of our goods are the best material from the best suppliers, whether the material is qualified can be checked. 4. Quality Control Before shipment, there are specialized personnel checks, each product in the packaging before the inspection is qualified. We guarantee that each product shipment is perfect for sale. 5. Good service We promise to answer your question in 24 hours.

Custom Metal Hardware Industrial Accessories Parts Stainless Steel / Steel OEM Service Quick Detail: 1. Material: Carbon steel, alloy steel, stainless steel, brass, copper, aluminum & zinc alloy, etc. 2. Process: Cold head, die casting, CNC & machining, laser/line cutting, stamping, CNC punching, CNC bending, welding, assembling, casting, forging, etc 3. Surface Finish: Silver, zinc, nickel, tin, chrome plating, powder coating, hot galvanized, polishing, brushing, etc Description: We are professional Custom Machined Parts , Metal hardware products manufacturer, and we can make all kinds of metal parts, truck parts, loader parts, tractor parts, Metal turned, Milling Parts, metal hardware, Custom Welding parts, Flexible Couplings. Our machines includes: Stamping machines, CNC machines, small lathes, milling machines, shapping machine, screw rolling machine, CNC machining center, EDM, wire cut machine and grinding machines etc, which made us can make and develop all kinds of metal products for you. We manufacture Custom machined parts in compliance with customer's design. In short, we could make all the metal parts if you had drawing or samples. Specifications: Production process laser/line cutting, stamping, CNC punching, CNC bending, welding, assembling, casting, forging, etc Surface treatment Silver, zinc, nickel, tin, chrome plating, powder coating, hot galvanized, polishing, brushing etc Equipments 1. stamping machine, oil hydraulic pressing machine, riveting machine, welding machine 2. CNC milling and turning, grinding, lapping, honing, lapping, broaching and other secondary machine, meter lathe 3. Line-cutting machine, laser cutting machine Material available stainless steel, aluminum, copper, brass, zinc, bronze, carbon steel etc Certificates approched SGS, CE, ROHS, ISO9001-2008 Features 1. customized design 2. small order accepted 3. free samples provided 4. high quality competitive price Trade term FOB, CFR, CIF, EXW Payment method T/T, L/C, Paypal, Western Union Delivery time 7-10 days or depends on your order quantity Service 1. prompt reply 2. quick delivery 3. 24 hour after-sales service 4. every month production can reach 600,000 pcs Packaging cartons, wooden case or plastic case depends on customer's request Minimum order quantity it is negotiabled Applications: Cars Bikes Aircraft M , usical instruments Watercraft Optical devices Sensors Models Namepl , ates Electronic devices Enclosures Clocks Mac , hinery Engines Furniture Jewe , lry Jigs Telecom Lighting , Medical devices Photographic devices Robots Sculptures Sou , nd equipment Sporting equipment Tooling Toys and more Competitive Advantage: Competitive price Quality approvals Guarantee and warranty Small orders are accepted Best service and prompt delivery Good products performance International approvals Manuafacturer rich experience Custom Metal Hardware Industrial Accessories Parts Stainless Steel / Steel OEM Service 0

Product name : Factory Sale High DPI Tear Drop Flag Printing Machine Machine working speed: Printing resolution and speed Resolution(dpi) speed 360*1080dpi(3 pass) 80m2/h 720*1200dpi(4 pass) 65m2/h 720*1800dpi(6 pass) 45m2/h Digital Textile Printer Application: Our machine is CE certificated. What's more , our sublimation printer has been used most field such as flag printing, banner poster printing, textile digital printing, carpet digital printing, windows curtain digital printing and interior decoration printing ,indoor and outdoor printing etc. Advantage: ·Far Infrared Blackbody Tube Radiation 1· Electro thermal Heating 2· Intelligent PID Temperature Control 3· Digital Tension Control 4· Feeding and Taking up Are synchronous 5· Vacuum Fan Delivery Is Controllable 6· Quick Tail Gas Treatment 7· Convenient to Maintain 8· Easy to Set up and Operate 9. Easy to load the media in and out oven during your machine working Machine specification: Product parameter Model CSR3200 Print head Piezo technology, Epson print head Ink Sublimation ink,pigment ink and reactive ink Color model Dual CKMY Nozzles (400 nozzles x 8 lines ) x4heads Printer head higher 15mm / 6mm ( Adjustable ) Ink supply model Continuous ink supply Max materials width 3300mm Max printing width 3200mm (can custom the size ) Roll diameter 3 Inch Maximum weight for roll material 100kg Interface USB 3.0 RAM128 128M Printer power AC220-240V./AC220-240Adaptive 50/60Hz Sublimation machine AC220-240V. 16A. 50/60Hz Power consumption Direct dye sublimation heater 3500W Printer 5500w Temperature 20-32°C Humidity 40-60% Non-condensing Weight Net Weight : 800kg Gross Weight : 920kg Factory Sale High DPI Tear Drop Flag Printing Machine 0 Machine Details Picture: Factory Sale High DPI Tear Drop Flag Printing Machine 1 Factory Sale High DPI Tear Drop Flag Printing Machine 2 Factory Sale High DPI Tear Drop Flag Printing Machine 3 After Sales Service: 1. With one year warranty and lifelong technical support. 2. Offer Video and operation manul,and the professional technical staff online guidance. 3. Guarantee prompt warranty service for main parts repairment and replacement by international courier Usage: Factory Sale High DPI Tear Drop Flag Printing Machine 4

Description: 1. The 130 kW modular unit saves investments on water systems. Compared with two 65 kW modules, one 130 kW modular unit saves the investment on the pipeline and accessories of one water system. 2. Compared with a combination of two 65 kW modules, one 130 kW, modular unit saves the land area by 14%. 3. The 130 kW modules support seamless installation and save the land area by 30% compared with 65 kW modules when multiple modules are combined during installation. 4. Sixteen 130kW modules may be combined, which easily expands the capacity of an air-cooled modular unit from 130 kW to 2080 kW. 5. The unit inherits the advantages of the 65 kW module, and uses the precise flow control technologies by using electronic expansion valves and efficient plate-type heat exchangers. The system performs optimal matching to ensure that the energy efficiency of the unit is above the energy performance certification standard of. 6. The RoHS certified environment-friendly galvanized steel sheet and 120μm- thick orange-peel spraying endow the unit shell with anti-erosion, hard fall- off, and slow fading. This makes the unit work a long time. 7. The unit adopts high-performing inner grooved copper pipes provided by well- known suppliers, which help the refrigerant form liquid film on the inner walls of the pipes, greatly increasing the heat exchange efficiency. 8. Compared with the traditional air-cooled modular unit that uses a thermal expansion valve, EK air-cooled modular unit uses 500-step PMV electronic pulse for precise adjustment to implement precise PID control. The system implements real-time matching and precise water temperature control, fully improving the optimal performance of each component inside the system. This makes the unit operate steadily at any workload and automatically adapt to varying ambient temperatures, solving the oscillation issue of a cooling system. In addition, the temperature output of the system is more steady, and the indoor temperature is more balanced, improving comfort. 9. The genuine dual-system panel-type heat exchanger can bear a 3.0 MPa pressure at the water side, and provide the pressure bearing capability for a water system in a high building. Compared with a shell-and-tube heat exchanger, this heat exchanger delivers higher heat exchange efficiency, and provides a cleaner internal environment. Compared with a traditional back-to-back heat exchanger, it provides higher heat exchanger efficiency and delivers higher anti-freeze capability at partial workload. When operating at partial workload, it provides higher heat exchange efficiency. A standard configuration provides a water pressure drop switch to monitor the unit water flow in real time as well as precise anti-freeze control. 10. Different from a traditional secondary pumping system, the primary Pumping Variable Flow System features variable flows at the refrigerant side and workload side and shares one transducer pump group. Its flow may drop with the workload of the air conditioner, greatly saving the operating expenses for the chilled water pump of the air conditioning system. 11. The unit may send out 2-way valve water control signals to cut off chilled water. This enables automatic flow control for pumps in line with the transducer, which helps easily implement primary Pumping Variable Flow System. 12. It is applicable to projects where the cooling workload of the air conditioner changes greatly, and the air conditioner works at partial workload for a long time. 13. Compared with the secondary pumping system, it saves the initial investment on the cooling water pump and pipes at the primary pumping system and on the power distribution system, and requires a smaller area of the equipment room. 14. EK test center is accredited by the CNAS national test lab. The EKAC modular air-cooled heat pump units pass the tests for extreme conditions by the national test lab, including anti-erosion, exhaustion, and frequent start. This endows the unit with extremely high reliability. Each unit passes 100% reliability test before factory delivery for quality assurance. A standard configuration provides a water sieve and a water pressure drop switch, which ensures that the unit does not run when the water supply is short or cut off. 15. The unit provides 13 powerful built-in protection functions, including protection against high/low voltage of compressors, protection against phase loss or inversion of the power supply, protection against frequent startup, compressor over-current protection, compressor air exhaust temperature protection, protection against unit overheating, sensor fault protection, anti- freeze protection for cooling, anti-freeze protection for the water system in winter, water flow protection, and ambient temperature protection. 16. The fan uses low-noise axial blades driven by the motor in direct connection. The blades pass dynamic balance and static balance tests. The whole unit is designed with shock isolation and multi-plenum noise reduction. Fully hermetic volute low-noise compressors from famous vendors and efficient low- noise fans ensure leading-edge noise and vibration levels. With the help of noise spectrum analysis, components such as fan and motor are carefully compared, selected, and improved, and noises of the structure and pipes are reduced. 17. The unit adopts intelligent defrosting technologies for precise defrosting settings, which help make comprehensive judgment based on the ambient temperature and suction temperature. The unit saves energy as much as possible by automatically correcting the conditions for defrosting based on the change curve of the coil temperature and by taking defrosting conditions in previous periods into account. In this manner, the unit implements precise defrosting based on the actual conditions, ensuring maximum operation time for normal heating, and minimizing the fluctuation of hot water temperature due to defrosting. 18. Any EK slave module may become a master module upon switchover. Damage to the master module does not affect running of other modules. In addition, any combination may be formed by using modules of the same or different models. A system may consist of 16 modules. Products of other vendors support only a specific unit as the master module. Once the master module is damaged, the whole system cannot work properly. As a result, debugging and maintenance are difficult. 19. The unit adopts a micro computer control system with a large screen LCD, facilitating use. Each control system can dynamically monitor the running status of 16 units, and supports RS485 communication interfaces. The control system runs the Modbus protocol for cluster control.

Product Description Popular RJ45 Connector with 10/100/1000 Base-t Transformers MECHANICAL: 1. HOUSING MATERIAL:glass-filled polyester(UL94V-0). 2. CONTACT MATERIAL:phosphor bronze T=0.46mm (C5 100). 3. PLATING: gold plating over nickel. 4. DURABILITY:750 cycles min. 5. PCB RETENTION PRE-SOLDER:1 LB min. 6. PCB RETENTION POST-SOLDER:10 LB min. Product Information Categories Connectors, Interconnects Modular Connectors Application-LAN ETHERNET(non-POE) Connector Type RJ45 Number of Positions/Contacts 8p8c Number of Ports 1x1 Mounting Type Through Hole Orientation 90° Angle (Right) Termination Solder Height Above Board 0.537" (13.65mm) LED Color Green - Yellow Shielding Shielded, EMI Finger Features Board Guide Tab Direction Up Contact Material Phosphor Bronze Packaging Tray Operating Temperature 0°C ~ 70°C Contact Material Plating Thickness Gold 6.00µin/15.00µin/30.00µin/50.00µin Shield Material Brass Housing Material Thermoplastic RoHS Compliant YES-RoHS-5 WIth Lead in Solder Exemption ELECTRICAL: 1. VOLTAGE RATING:125 VAC RMS. 2. CURRENT RATING:1.5 AMP. 3. CONTACT RESISTANCE:50 milliohms max. 4. INSULATION RESISTANCE:500 megohms min @ 500V DC. 5. DIELECTRIC WITHSTANDING RESISTANCE:1000V AC RMS 50Hz. 1min. ENVIRONMENTAL: 1. STORAGE:-40℃ TO +85℃. 2. OPERATION:0℃ TO 70℃ 3. WAVE SOLDER TEMPERATURE:230-250℃(5-10 seconds) MATES WITH MODULAR PLUG CONFORMING TO FCC PART F. Drawing: Female RJ45 Modular Jack Connector With 10/100/1000 Base -T Transformers Yellow / Green LED And EMI Finger 0 Production&Testing PHC have more than 30 units automation equipments to product as possible PHC Every Magnetic RJ45 tested 3times (not just batch tested) PHC Every SMT part used Automation testing and packing. Lead Time With large Popularity of 450 Workers distributed in 4 subsidiary corporations, PHC can offer the fastest Lead time,and the particular case is according to the situation. Case.1 Stock 25% Case.2 3-4 Weeks 70% Case.3 5-6 Weeks 5% Service PHC Offer good pre-sales & after-sales service &Strong technical support New Project: Strong technical and ideal support your new design Existing projects: Try to help customer to save the cost to offer the good quality product and save time. Free Samples:3-5 PCS of each part number Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping safe and fast. Customer complaint:24-48 hours reply 8D report Warranty : 24 months ( Merchandise are promised to be promptly returned, replacement,,or repair kits if customers are not satisfied) Why Choose Us What can we do for you? 1. We can offer free samples. 2.Various operation force, height, and color for your choice. 3. large quantity discount Why us? 1. Excellent quality with competitive price We are a manufacturer making RJ45 for more than 15 years. 2.Quality guaranty Check quality one by one before shipping, We have a good quality-control team and precision testing machine to control the quality seriously 3. Customize acceptable according to your design to produce a quality product.

Fast trigger Dual lens 4K Trail Camera full HD photo and video Outdoor waterproof CE FCC ROHS Hunting Camera The KW698A-4K trail camera offers dual sensors for high quality images day and night and checks all the boxes successful hunters want the most: The highest picture resolution with dual sensors for the best image quality at day and night, plus optimized battery life for maximum image captures and more time in the field without checking batteries. All in a compact design to stay hidden from eyes you don't want to alert–animal and human. Model Number KW698A Effective Pixels Day Sensor:15M; Night Sensor: 5M Lens Night Sensor lens (at night): f=7.36mm F/NO:2.8 FOV=55°,HOV=42°; Day Sensor lens(at day) : f=8.45mm F/NO:2.8 FOV=50°,HOV=40.5° IR-Flash Range IR LED: 6*940nm LEDS(25m-30m) Display Screen 2.4 inch HD Color Display Image Size DAY: 30M;13M;8M; NIGHT: 8M;5M;2M; Video Size 4k@30fps;1920*1080@60fps; 1280*720 @60fps; PIR Sensitivity PIR with 4 sensitivity levels:High/ Normal/ Low/Auto Response Time Picture trigger: < 0.4 s, Video trigger: <0.6s Triggering Interval 1sec-60min programmable Shooting Numbers 1-9 programmable Video Length 5-60sec. programmable Power Supply 8×AA recommended; DC12V Operating Temperature -20-60℃(Storage temperature:-30-70℃) Operating Humidity 5%-90% Waterproof IP67 30MP Outdoor Hunting Trail Camera Kw6981 Dual Sensors 4k Ip67 Infrared PIR 0 30MP Outdoor Hunting Trail Camera Kw6981 Dual Sensors 4k Ip67 Infrared PIR 1

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety and automation system. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal isolators, surge protection device, safety relay, automation direct safety relay, intrinsically safe barrier relay, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. Safety relay is mainly applied to the safety control circuit, connecting the safety sensing elements and mechanical equipment motion controller. When there is a fault in the safety circuit, the safety relay automatically detects the fault and stops the machine movement, to protect equipment and personnel safety. Chenzhu safety relay is the first product to get PLe/Cat.4, SIL3 certified in China mainland. Automation and safety is the main character of the product that you can be assured. Safety Relay Types CZSR Classic Series Safety Relay CZSR Classic Series Safety Relay is a classic general-purpose safety relay with high cost performance, suitable for various industrial automation applications. Including E-stop buttons, safety gates, light beam devices, two hand control safety relay, safety mats and safety relay module. E-Stop Button, Safety Gate Safety Relay Light Curtain Safety Relay Two-hand Push Buttons Safety Relay Safety Mat Safety Relay Extension Module Safetu Relay CZSR Process Series Safety Relay Since the beginning of the industrial age, examples of critical processes have been common. Safety instrumented systems are most commonly used in process (such as refineries, chemical, nuclear power) facilities to provide protection. DO Signal (SIS) 24V DC 3A Safety Relay DO Signal (SIS) Input 24V DC 5A Safety Relay CZSR Smart Series Safety Relay CZSR Smart range is a smart safety controller product that can be flexibly configured with logic, and is suitable for small stand-alone automation equipment.

Minimum Order: 200000

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety automation system. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal conditioner, surge protection device, safety relay,signal arrester, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. Electronic devices are always threatened by power surges and transients caused by power failures or nearby lightning strikes. Signal SPD was born to protect electronic devices in automatic control systems. It is signal surge protector for field equipments such as sensors, transmitters, flow meters, solenoid valves, thermocouples, thermal resistance, devices with RS485 or RS232 interface and for I/O interfaces such as Al, AO, Dl, DO, Tl, Pl in PLC, DCS, FGS, ESD control systems. It was widely used in petrochemical, gas, environmental protection and new energy industries. Chenzhu also provides signal surge protection device in intrinsical safety circuits that meet the same design and structural standards as intrinsic safety equipment, which requires certification and approval of them.

Minimum Order: 200000

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in automation safety. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal conditioner, surge protection device, safety relay, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. CHENZHU SPD (surge protection device) has a fast and powerful surge current leakage capacity. In the lightning surge interference, the surge protection equipment ensures the safety of the industrial automation control system a variety of field equipment and control equipment. The SPD protection device created by Chenzhu, one of the most professional spd factory, has integrated lightning-proof technology, intrinsic safety explosion- proof technology, and functional automation safety technology. As a result, the SPD electrical device is the first 20kA anti-surge capacity of the leading products in China. The SPD surge protector is also an important part of the safety automation system like the intrinsic isolated barrier, signal conditioner, safety relay, etc. Now the spd for sale is very cheap, so if you want buy spd, please contact us quickly.

Minimum Order: 200000

Main Use for automobile, agricultural machine, heavy vechiles,and so on All Terrain Vehicle,transmission shafts, cardan shaft, drive shaft Use for automobile, agricultural machine, water machine,and so on 1: Competitive price, good quality and perfect service 2: Produce according to the drawing, sample and other requirement. 3: Heat treatment, rust prevention 4: High precise 5: Casting or forging; machining 6: Heat treatment; rust prevention

Minimum Order: 1 bags

Main Use for automobile, agricultural machine, heavy vechiles,and so on All Terrain Vehicle,transmission shafts, cardan shaft, drive shaft Use for automobile, agricultural machine, water machine,and so on 1: Competitive price, good quality and perfect service 2: Produce according to the drawing, sample and other requirement. 3: Heat treatment, rust prevention 4: High precise 5: Casting or forging; machining 6: Heat treatment; rust prevention

Minimum Order: 1 bags

Features: 1: Material: ZG35CrMo 2: Customized according to your sample or drawing or demands 3: High quality,competitive price 4: Brand name: according to each other customers requests to engrave it on the products 5: ISO certificated 6: Pure hearted services 7: Flexible minimum order quantity 8: All of our products are wildly used in Metallurgy Industry,Iron and Steel Industry,Petroleum Industry,Chemical Industry and Paper Making,such as metal machinery, rolling mills, mill machines, cranes,non ferrous metal, oil machinery, and plastic machines.

Minimum Order: 1 bags

Features: 1: Material: Steel 35CrMo, casting, forging or as per customer requires. 2: Excellent performance and long using life 3: High intensity and rigidity. 4: Heat resistant and Distortion resistant 5: Meet ISO quality system 6: With R D dept., OEM orders are welcomed. Other relevant parts for cars or machinery we have made in our workshop are as follows: Drive shaft parts and assemblies, Universal joint parts and assemblies, PTO drive shafts, Spline shafts, Slip yokes, Weld yokes, Flange yokes, Steering columns, Connecting rods,

Minimum Order: 1 bags

1: Used in industry and heavy equipment 2: OEM manufacturer We are universal joint,drive shaft,cross joint and cardan shaft coupling manufacturer. Features: 1: Material: 35CrMo 2: Customized according to your sample or drawing or demands 3: High quality,competitive price 4: Brand name: according to each other customers requests to engrave it on the products 5: Pure hearted services 7: Flexible minimum order quantity 8: All of our products are wildly used in Metallurgy Industry,Iron and Steel Industry,Petroleum Industry,Chemical Industry and Paper Making,such as metal machinery, rolling mills, mill machines, cranes,non ferrous metal, oil machinery, and plastic machines. 9: Contact us for more information.

Minimum Order: 1 bags