Offers to Sell

Application blowing sand and dust test chamber is capacity of 1000 liters. Considering that some specimens are smaller, following the marketing demand and customer required that we designed and produced this small sand and dust chamber. Feature ASTM B117 chamber dust sand test chamber dust proof chamber is made for the simulation of dust and sand conditions. These sand and dust chamber used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Blowing sand and dust test chamber door attached to the window, the door to the lower part of the electrical control area,Simulated sand dust of talc in the lower hopper of the test chamber. Use the of circulating fan and automatic jar will be blown into the upper network studio talcum powder through a 75 micron square hole,The test space form high density dust shape, test specimen. Technical Specifications Concentration: Adjustable 1–20 g/m³ (±0.5 g/m³ precision). Temperature Range: -30°C to +80°C (±2°C stability). Airflow Velocity: 1–20 m/s (variable for static/dynamic testing). Volume: 0.6 m³ (standard) to 2.5 m³ (custom), with reinforced acrylic observation windows. Test Duration:Programmable cycles (1–999 hours), IP5X/IP6X compliance modes.

Minimum Order: 1 bags

Greentech International (Zhangqiu) Co., Ltd is the professional blower supplier. Multistage Centrifugal Blower has the advantage that capacity is easy removed, so is widely used in sewage waste water treatment, metal, chemical etc. The profile curve of rotor is advanced, As a result, the effciency of blower is up to 80%. Integrated welded horizontal split type is applied to casing and return channel; which makes the blower lighter and simple.As far as weight, only 1/3-1/2 of other similar product. Casting aluminum alloy is adopted to impeller.After strict dynamic balance,low vibration,low noise, longworking life and high reliability is attained. The structure is advanced.Easy-worn parts are few.Installation, operation and maintenace is convenient. Adjusting capacity is convenient At the specified pressure, the blower has the wide range of capacity, so it can be applied in varied conditions. The blower is attached with anchor bolts, coupling and protective cover. Motor, electric controler, bend pipe,flexible connectiong,suction and discharge silencer, the common base of moter, filter, non-return valve, relief valve, adjustable calve and noise insulator are supplied. Special requirements, if any, please contact with our technique department. Features of Centrifugal Blower: 1. The profile curve of impeller is advanced. As a result, the efficiency of blower is up to 80%; 2. The casing and return channel, which makes the blower lighter and simple, the performance of blower is steady and reliable; 3. After strict dynamic balance, impeller is low vibration, low noise, long working life and high reliability is attained; 4. The structure is advanced. Easy-worn parts are few. Installation, operation and maintenance is convenient; 5. Adjust capacity is convenient. At the specified pressure, the blower has the wide range of capacity, so it can be applied in varied conditions; 6. The product mainly used in the fields of sewage waste water treatment, coal separation, furnace boasting, electricity plant and oil refinery, and even transport other innocuous, non-corrosive gas Model NO. C50-1.6 Pressure Low Pressure Color Blue Drive Motor Con , nect Direct Model No. C Series Transport Package Wooden Case Specification C series Trademark greentech Origin Chin , a HS Code 8414 Production Capacity 1000sets/Months

Minimum Order: 17829

HALT (Highly Accelerated Life Test) and HASS (Highly Accelerated Stress Screening, or high accelerated stress screening, is two reliability testing methods used to quickly expose potential defects in products and is widely applied in fields such as electronics, automobiles, and aerospace. HALT: It is used in the R&D stage to quickly identify design weaknesses through extreme stress (temperature, vibration, voltage, etc.) and optimize product reliability. HASS: It is used in the production stage to screen manufacturing defects and ensure the quality of products leaving the factory.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Combine temperature and vibration for stress testing Capacity：215 to 1100L Temperature Range：-100 to +200℃ Consistency: ≤20%(Higher than the industry standard) Heating &Cooling Rate (average)：70℃/min Vibration Frequency Range：5 to 1,000Hz Vibration range：5 to 100GRMS Vibration Overshoot：≤2GRMs Patent Number: CN201520670413.0

Minimum Order: 1 bags

The temperature and humidity highly integrated test chamber is an indispensable testing device in the fields of aviation, automobiles, home appliances, scientific research, etc. It is used to test and determine the parameters and performance of electrical, electronic and other products and materials after being subjected to high temperature, low temperature, alternating humidity and heat, or constant temperature environment changes. 1. Environmental simulation and testing The temperature and humidity highly integrated test chamber can simulate various climatic conditions ranging from extremely cold to high temperatures, as well as environments with different humidity levels. So as to evaluate the performance and reliability of the product under these conditions.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ 2. Material and product testing It is applied in industries such as electronics, automobiles, aerospace, military industry and medicine, and is used to test the reliability of materials and products.

Minimum Order: 1 bags

The environmental test chamber is suitable for the adaptability tests of electrical and electronic products, components and other materials under different humidity conditions. It can simulate different environmental conditions such as temperature, humidity, vibration and low air pressure to test the performance and reliability of the products. Working principle: The environmental test chamber system adopts a method of balancing heating and cooling, as well as humidification and dehumidification for temperature and humidity control. The controller compares the temperature and humidity values detected by the temperature and humidity sensor with the set values of the controller. After a series of operations, it adjusts the on- off time of the heating and humidifying solid-state relay, thereby achieving the purpose of regulating the heating and humidifying power.If you need more models about our test equipment, please reference our https://www.chamber- testing.com/ Technical Specifications Benchtop environmental test chambers Capacity: 22.5 to 64L Temperature Range：-65℃ to +150℃ Temperature Fluctuation：≤ ±0.5℃ Temperature Deviation：≤ ± 2.0℃ Humidity Range： 20% to 98%R.H Humidity Deviation：± 3.0% RH(>75%RH) Noise test：≤ 68dB

Minimum Order: 1 bags

Pressure deviation: Atmospheric pressure ~40KPa: ±1.8KPa; 40 kpa to 4KPa: ±4.5% 4KPa to 0.5KPa: ±0.1KPa Temperature range: B: -20℃ to 150℃ -40℃ to 150℃. Pressure range: Atmospheric pressure to 0.5KPa. Blood pressure reduction time: <45 minutes (normal pressure to 0.5KPa). Temperature fluctuation: ±0.5℃ (normal pressure, no-load) Temperature uniformity: <±2℃ (normal pressure, no-load) Temperature deviation: <±3℃ (normal pressure, no-load) Heating rate: 1.0-3.0℃/min. Cooling rate: 0.7-1.0℃/min It is mainly applied in fields such as aerospace industry, national defense research and development, and scientific research in universities and research institutes. It can be used to confirm the environmental adaptability and reliability tests of components, electrical and electronic components, instruments and meters, materials, complete machines and related products during storage, use and transportation under the single or combined effects of low pressure, high temperature, low temperature and damp heat.If you need more models about our test equipment, please reference our https://www.chamber- testing.com/

Minimum Order: 1 bags

The principle of the composite salt spray test chamber is to test the corrosion resistance of salt spray by simulating climatic conditions such as salt spray environment and hot and humid environment. The functions of the composite salt spray test chamber include: Salt spray system: Composed of a solvent tank, a variable-speed peristaltic pump, a pneumatic system, a foam tower, nozzles, etc., it is used to simulate a salt spray corrosion environment. 2. Drying system: Composed of a blower, air heater, diffusion plate, pipes, etc., it is used to simulate a drying environment. 3. Automatic water replenishment device: Ensures that the water level in the laboratory and pressure tank remains within a specific height range; 4. Programmable controller: Set functions such as salt spray, drying, and humidification. The sequence of these processes can be arranged arbitrarily and repeated in a cycle. 5. Spray method: Tower-type spray, with mist particles naturally settling and evenly distributed. Either periodic or continuous spray can be chosen. 6. Box body: Made of PVC board, it is corrosion-resistant, lightweight and has high strength.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ 7. Heating method: Direct heating method, fast heating speed, reduced standby time, temperature control, and low power consumption. The composite salt spray test chamber is used for product testing in industries such as aerospace, electronics, automobiles, chemicals, metals, and transportation. It helps improve product performance through test result data.

Minimum Order: 1 bags

Thermal shock tests must comply with a series of international standards, which are widely used in the testing of different industries and products: Iec 60068-2-14: For temperature change testing. MIL-STD-810: Mainly for environmental testing of military equipment. ISO16750: Applicable to automotive electronic testing JESD22-A104: Used for testing electronic components. GJB150.5: It stipulates the calculation of the temperature stabilization time in the test. If the temperature stabilization time is less than 1 hour, the time should be set at 1 hour. If the temperature stabilization time is greater than 1 hour, the actual temperature stabilization time shall be used for calculation. GB2423.22: It stipulates five time periods ranging from 10 minutes to 3 hours. The holding time should be selected based on the stabilization time of the product temperature in the cold and heat shock test chamber being tested, and a similar or optional time period grade should be chosen. Method 503.4 of the 810F specification: Directly adopt the time required for the product to reach a stable temperature or the exposure time of the product in the actual environment, without specifying a specific time or an optional time grade.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ The equipment is usually divided into three parts: high-temperature zone, low- temperature zone and test zone. It adopts a special heat insulation structure and heat and cold storage effects. The cold and hot air paths are switched to introduce them into the test samples for cold and heat shock tests. Generally, the test samples do not move.

Minimum Order: 1 bags

Micronized wax is a vital functional additive in industrial paint processing, with primary functions and mechanisms as follows: Enhancing abrasion resistance and scratch resistance: Micronized wax particles migrate to the paint film surface during film formation, creating a protective layer that reduces direct external force impact, significantly increasing the number of passes in RCA abrasion resistance testing. ‌Improved slip and tactile feel: Reduces surface friction coefficient, delivering a refined, smooth-to-the-touch finish. ‌Anti-blocking and anti-marring: Prevents coating adhesion during stacking or compression, suitable for packaging, woodwork, automotive interiors, and similar applications. ‌Matting and gloss control: Certain micro-waxes achieve a matt effect without compromising transparency. Dispersion stability and rheology modification: Polyamide wax micropowders form network structures to prevent pigment settling and enhance application levelling.

Application TESTEQ ESS Chamber suitable for testing the quality of electronic, electrical, communication, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace, and other products. If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Descri , ption (ESS Chamber) Rapid rate temperature test chambers are meant to test the durability of your product for long-term storage or operation in these environments. Temperature cycling between high and low temperatures will create accelerated thermal fatigue of solder joints, seals, and connections in your product. The ramp rate of the chamber is 3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min, 20℃/min, linear or non-linear type.  As a professional Rapid Temperature Change Test Chamber in China, We can provide you with different types of high quality climatic test chamber. Chambers Feature 1.Integral structure, the inner wall special process rolling molding, the whole using TIG seamless welding, beautiful appearance; Door lock device adopts lever power opening mechanism. 2.The use of Chinese+English color LCD touch man-machine interface + high- performance programmable controller (PLC), with TESTEQ test box special software, with automatic, intelligent, human control and other characteristics. 3.Control mode: constant operation mode, program operation mode. 4.Patented "Cold and heat balance technology”, low temperature constant temperature season can be more than 30%. 5.Refrigeration compressor and key accessories are selected international and domestic well-known brands, long-term and reliable operation; Environmentally friendly refrigerant, in line with the requirements of international environmental protection conventions. 6.Configure RJ45 communication interface, remote control system (open data transmission protocol support Modbus/OPC). 7.Surface electrostatic powder spraying; Box color "TESTEQ White ", controller panel color "TESTEQ Blue ". 8. TESTEQ patent cold well adsorption anti-condensation function (optional).

Minimum Order: 1 bags

Application TESTEQ industrial vacuum heating oven mainly used in chemical industry, electronic communication, plastics, cable, electroplating, hardware, automobile, optoelectronics, rubber and other industries. Products, molds, painting, printing, medical, aerospace, military scientific research and other fields, the temperature can be operated between 40C and 500C, generally below 200C or below 300C to meet 80% of the factory customers. Description TESTEQ industrial Vacuum heating oven adopts forced air circulation heat treatment, effectively ensuring temperature balance inside the box, helping to achieve good temperature uniformity inside the box, reaching±1%. That's why hot air  industrial heating oven are also known as precision pharmaceutical oven. In order to improve the user experience,  TESTEQ Vacuum industrial heating oven has changed its traditional structural design, and now all TESTEQ heating oven have external chamber temperatures below 40 degrees Celsius. If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Feature Digit , al display controller or touch screen controller. Industrial heating oven temperature can be customized up to 500 ℃. The heating method adopts hot air circulation, with rapid heating and uniform temperature distribution, ensuring that the entire sample is exposed to the same temperature to obtain consistent and reliable results. Multifunctional: The hot air stove has a wide range of applications, including sterilization, drying, and solidification. Vacuum degree control: The digital vacuum meter automatically controls the vacuum degree, and the temperature control is precise and reliable. The vacuum degree can be easily controlled through the panel, with a control accuracy of ±1%. vacuum degree of the TESTEQ vacuum heating oven door can be adjusted by the user at will, and the silicone rubber door sealing ring ensures a high vacuum degree inside the oven.

Minimum Order: 1 bags

Industry-Leading Contamination Removal for Lithography, Optics & Wafer Processing This equipment adopts an innovative inclined sealing structure (patented design-Thermal Vacuum/Lithography/UHV). Through the gravity-adaptive cover plate and double-ring sealing ring interlocking technology, it can maintain a stable vacuum level (≤10⁻⁶ Pa), solving the problem of reduced cleaning efficiency caused by sealing failure in traditional equipment. It integrates a dual-fluid spray system (sodium hydroxide + deionized water), supporting non-destructive cleaning in a high-temperature (350℃) vacuum environment, avoiding thermal stress deformation. It is suitable for the maintenance of high-precision components such as mask plates, lens groups, and vacuum pump components of lithography machines, significantly improving chip yield and equipment lifespan.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/a/d/Thermal , -Vacuum-Cleaning-System.html

Minimum Order: 1 bags

temperature humidity chamber is used to simulate the combination of temperature and humidity of the product in a climatic environment (high and low temperature operation, storage, temperature cycling, high temperature and high humidity, low temperature and low humidity, dew testing, etc.). Suitable for aerospace products, information electronic instruments, materials, electrical, electronic products, all kinds of electronic components at high and low temperatures to test their performance indicators.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Features: < , br>1.Monolithic structure with inner walls formed by special rolling technology and seamless TIG welding, ensuring an aesthetically sleek design. The door lock employs a 2.-driven opening mechanism. 3.Chinese-language color LCD touchscreen HMI paired with a high-performance programmable logic controller (PLC) and custom-developed software by Hardy Test Chambers, offering automated, intelligent, and user-friendly control. 4.Control modes: Constant operation mode, program operation mode. 5.TEST EQ patented "Cold and heat balance technology” reduces energy consumption by over 30% during low-temperature stabilization. 6.Refrigeration compressors and critical components sourced from internationally and domestically renowned brands ensure long-term reliability. Uses eco-friendly refrigerants compliant with international environmental conventions. 7.Humidification system incorporates TEST EQ patented technology. 8.Equipped with an RJ45 communication interface and remote control system (supports Modbus/OPC protocols for open data transmission). 9.Exterior finished with electrostatic powder coating; body in "TEST EQ White" and door in "TEST EQ Blue." 10.TEST EQ patented Cold Well Adsorption Anti-Condensation Function (optional).

Minimum Order: 1 bags

1.Electronics: • Environmental chamber accelerated aging tests for PCBs, semiconductors, and batteries (e.g., ESS per GJB 1032). 2.Automotive: •Validation of sensors, seals, and adhesives under thermal cycling (e.g., -40°C to +85°C). 3.Pharmaceuticals: •Stability testing for drugs, vaccines, and medical devices (ICH Q1A- compliant). 4.Materials Science: •Testing applicantions of thermal expansion analysis of polymers, metals, and composites.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ 5.Acdemic Research: •Climate chambers simulation for biology (plant growth chambers) or aerospace (component fatigue studies).

Minimum Order: 1 bags