Offers to Sell

Portable Acoustic Noise Barrier Temporary Fencing for Construction Site Frishine supplies high quality Noise Barrier Panels for construction site noise reduction and control of noise pollution caused by construction activities. Modular panels consist of a sound-absorbing layer sandwiched between two rigid outer metal sheet layers. The outer layers reflect sound waves back towards the source, while the inner material traps and dissipates the sound energy, effectively reducing noise transmission. Materials Filling material for noise absorption: The core of the noise barrier panel is typically made from high-density vinyl, polyethylene, or fiberglass with excellent sound absorption and insulation properties. Panels: The acoustic panels are encased in metal frame of aluminum or galvanized steel, to ensure durability and structural integrity. Features Easy Installation and Removal: Modular design allows for quick assembly and disassembly, making the panels ideal for temporary use on construction sites. Superior Acoustic Performance: Constructed from high-quality sound-absorbing materials, including mass-loaded vinyl, foam, and advanced composites, our noise barrier panels excel in reducing noise transmission, protecting surrounding areas from excessive sound levels. Weather Resistant: Made from materials that resist corrosion, UV damage, and harsh weather conditions, our acoustic panels ensures long-term durability and reliability of our noise barrier solutions. Standards Our noise barrier systems include: sound-absorbing perforated panels and soundproofing panels, supported by posts and base plates for installation. Noise Barrier Panels can be supplied with Vision Panels, according to EN1793 & EN1794 European standards. Manufactured meeting or exceeding industry standards for sound reduction, safety, and environmental impact. Noise Barrier Panels – Specifications Common range Panel sizes: 4 feet x 8 feet to 10 feet x 20 feet. Custom sizes available to fit specific project requirements. Panel Thickness: From 2 inches to 4 inches, depending on the level of noise reduction required. Sound Reduction Coefficient (SRC): Varies depending on materials and construction, with higher ratings indicating greater sound reduction capabilities. Export Specifications Noise reduction panel and corrugated steel fencing Metal Noise Reduction panel – 2000mm X 750mm X 33mm thickness Metal Noise Reduction panel – 2000mm X 500mm X 33mm thickness CORRUGATED STEEL – SINGLE SIDE, OFF WHITE x 1000mm width x 2400mm length Bi-absorbent Noise Barrier Panels for Sound Barrier Bi-absorbent Noise Barrier Panels with vision panel Specification: Bi- absorbent noise barrier panel with size of 3 mtr width x 3.5m height, with EN1793 &v EN 1794 European standards. Technical Specifications: Noise barrier shall compose of certified and tested panels according to the requirements of the European Standards. Material specifications: Posts: UC 152 type welded to a 20mm thk. base plate with all required gussets, cleats etc duly hot dip galvanized with a coat of primer and two coats of epoxy finish paint. Posts are fastened to the flyover with M 20 anchors and chemical grout. Construction: Bi–absorbent Aluminum perforated shells of 1.2 mm thk. duly assembled with self-drilling GI screws. Two slabs of water repellent mineral/rock wool of 40mm thk. and 90 kg/Cu.m density is sandwiched inside the Aluminum panel, duly separated by a 1.20 mm thick aluminum sheet separator to induce bi-absorbent effect. Aluminum panels shall be powder coated. Sound proofing transparent panels 15mm thk. PMMA sheets (of size 3m x 0.5 m) duly encased in a bolted steel frame with EPDM rubber gasket. The steel frame is to be hot dip galvanized with a coat of primer and two coats of epoxy finish paint. Portable Noise Barrier Fencing Noise barrier fencing panel wall This fencing barrier is designed for efficient noise control for construction sites, events and other sound reduction applications. Base Material: The core of our fencing combines vinyl sound insulation felt with a layer of sound-absorbing wool, available in thicknesses of 1.5mm, 2mm, or 3mm. Exterior Surface: The front is finished with a waterproof and UV-resistant PVC. Interior Lining: Fiberglass fabric adding an extra layer of sound insulation. Dimensions: Standard sizes range from 1-2 meters in width by 2-3 meters in height, with customization options available. Thickness: 20mm and 25mm. Construction: Available in designs of 3 and 4 layers for enhanced acoustic performance. Sound Reduction: Capable of reducing noise by 15db to 27db. Noise Barrier Panels for Airports: Our specialized Noise Barrier Panels can be used to provide effective temporary noise control for airports. Construction Project: Perforated Sheet Noise Barrier Fence Panel Size: Each panel 518mm in width, 120mm in depth, and 1000mm in height. Total Panels: 580 panels for temporary noise enclosure.

Yellow Powder-Coated Steel Wire Mesh Temporary Fencing Panels for Construction Scaffold Area, Barriers and Tem Control Frishine supplies high-quality Yellow Powder Coated Temporary Fencing Panels of various types and specifications. The modular framed wire mesh panel design ensures flexible and quick-installed safety fencing for construction, event boundaries and facility enclosure. Durable Construction and Finish Construction: The fence panels are firmly, strongly and precisely welded to a stable grid. Finish: The temporary fencing panels are galvanized and powder coated, with excellent resistance to moisture, chemicals, UV light, and extreme weather, used as an effective safety and warning barrier. Product Specifications Standard specification Wire Gauge: from 12 gauge (2.77 mm) to 6 gauge (4.88 mm) depending on the level of security needed. Thicker gauges are stronger and offer more resistance to cutting or breaching. Mesh Size: From 1/2 inch (12.7 mm) to 4 inches (101.6 mm). Smaller mesh sizes are often used where a higher level of security is needed. Sheet Size: From 3 feet (0.91 meters) to 8 feet (2.44 meters) and widths are often 8 feet (2.44 meters). Materials Mesh Material: Steel wire. Coating: PVC, or powder coating. Color: Bright Yellow Fence Panel Height Options: For areas requiring lower barriers, we offer panels with a height of 4 feet. For increased security and perimeter fencing, 6 feet high panels are recommended. Yellow Color Painted 1/2 x 1/2 Welded Mesh Temporary Fence Panel Barrier Wire diameter: 10 gauge Mesh: 1/2×1/2 square hole mesh Finish: Pvc coated, plastic soaked Yellow coated welded mesh temporary fence panel Yellow Powder Coated Galvanized Steel Fencing System for machine guarding and space isolation: including framed steel mesh panel, posts, connection parts. All component are galvanized and painted into yellow. Yellow color pvc coated welded wire mesh temporary fence panel for crowd control Customized Color Options for Mesh Fencing Panels: We also supply other coating colors while yellow color mesh panels are most popular for fencing barrier uses. Yellow coated wire mesh panels provide a highly visible boundary fencing. Features Quick Installation Modular Design Enhanced Visibility and Decoration: The panels feature a wire mesh design, making a high visibility decorative enclosure. Superior Corrosion Resistance: with a dual protection process of galvanizing and yellow powder coating. Eye-Catching Design: The bright yellow color increases visibility, beneficial for safety barriers around construction sites or hazardous areas. UV Protection: For PVC coated panels, the coating material may include UV inhibitors to prevent the color fading and the material degrading under sunlight. Applications Yellow coated welded wire mesh fence panels are widely used in various industrial and commercial applications, mainly: 1, Perimeter Fencing: Fencing barrier for industrial areas, parks, schools, and residential properties. 2, Safety Barriers: Yellow painted mesh panels are used to create safety barriers around machinery or hazardous zones, the yellow color coding is often used to indicate caution, making these barriers easily noticeable. 3, Shelving and Racks: Yellow coated welded wire mesh panels are used in making shelving units and racks in warehouses, retail stores, and workshops. 4, Construction safety: Yellow fence panels can be used for scaffolding guards, site fencing, and safety screens around work areas to ensure the safety of workers and the public in construction.

Construction Site Temporary Fence Panels: Chain Link, Panel Fencing, Barricade and Privacy Fencing Frishine supplies high quality temporary fence panels for construction site boundary, safety and security control, exported for projects in USA, Italy and other countries. Temporary construction site fence is a portable security barrier used for various construction site, building, infrastructure work sites to secure spaces and workers safety, to control pedestrian and vehicular traffic. Components: Temporary construction fence panels are made of various mesh fabrics to choose from, mostly galvanized wire mesh for corrosion protection. The fence panels are often used with hoarding system for privacy and noise reduction, reinforced with base for wind resistance. Types of Temporary Fences for Construction Sites: Chain Link Fencing: A popular and cost-effective fencing solution. Panel Fencing: Pre-assembled modular steel panels that can be quickly set up and removed. Barricades: Lightweight and portable panels for specific uses. Privacy Fencing: Including privacy screens and/or fabric attached to the fence to block visibility, reduce dust and noise. Specifications and Constructions 1)Temporary Fence Panels for Construction Site Isolation: 4 feet tall, made with black coated chain link mesh. 2)Temporary Fencings for Constructions Security: Available in two sizes, 3.50m x 2M and 2.50m x 1.20M, with either concrete-filled plastic feet or PVC feet. Construction site security fencing with plastic feet 3)2400mm Temporary Fence Panel of Galvanized Wire Mesh Panel and Mesh Specifications: Made from galvanized wire mesh, measuring 2400mm in width and 2100mm in height, offering a robust barrier for construction and event sites. Base and Stability: The fence is supported by a molded plastic base, providing flexibility and stability. Additional Support and Assembly: Fence panels with clamps and side bracing, ensuring a secure and reliable installation.

Expandable FRP and Steel Temporary Barricades: Security Barrier for Schools, Transport, & Crowds Frishine supplies high quality Temporary Barrier Barricades, used for outdoor event management, construction, public safety, and crowd control. Temporary Barricades feature collapsable and expandable design, safety, and flexibility. steel and Plastic material expandable PE barricade in bright orange color, or yellow and black. Barracade types according to specific uses: Crowd control barriers, airport runways barricade, roadway safety barricades. Materials Metal Barricades: Constructed from high-grade steel and galvanized for superior rust and corrosion resistance, our metal barricades are ideal choice for high- traffic events and construction sites, providing steadfast physical barriers. FRP Barriers: FRP (Fiber Reinforced Polymer) barricades are known for their strength, lightweight design, and corrosion resistance, ideal for outdoor applications with excellent durability. Specifications and Dimensions Temporary Barricades are made with standard size and customized specifications, supply flexible protection for various applications: Length: Standard 2.5 meters (8.2 feet) in length. Height: Standing 1 meter (3.3 feet) tall. Frame Diameter: 38mm (1.5 inches) diameter for steel material, FRP frame comes with a 35mm (1.38 inches) diameter. Weight: Metal barricades weigh approximately 18 kg (39.7 lbs), FRP barracades are lighter at around 12 kg (26.5 lbs). Barricade with FRP frame Expandable Steel and Plastic Barricade- FRP Tube+Steel Panel Safety Mobile Guardrail for Construction and Kindergarden Isolation Heavy duty steel barricade of tube painted in color Steel Security Barrier: Temporary Barricade for transportation, schools, and isolation Applications Our barricades are suitable for: Event Management; Construction sites safety; Public crowds at exhibitions, trade shows, and public events; Traffic control temporary road closures. Features Convenience: Designed for easy assembly and disassembly; Stability: A wide base and optional anchoring system provide firm stability, ensuring the barricades remain in place under crowded conditions; Visibility: With high-visibility colors and optional reflective strips, these barricades are easily noticeable, enhancing overall safety. Customized styles: We offer customization of colors, logos, and reflective strips, to specific branding and safety requirements.

ASTM A392-06 Compliant Temporary Chain Link Fence Panels for Construction, Schools, and Large Events Frishine supplies high quality temporary chain link fencing ideal for various perimeters safety. Chain link temp fence panel is a cost-effective and flexible fencing material with simple installation, perfect for time and budget- sensitive projects. Chain link mesh fabrics are highly corrosion resistant durable materials, treated with galvanized zinc coating, powder coated, and galfan coated options. Chain link temporary fence panels mainly work by two ways: Chain Link Fence Panels with Security Gates and Panel Stand; Chain Link Partition Panels with Security Gates and Panel Stand. Portable Chain Link Fence Panels Chain link mesh style temporary fence panel galvanized Our temporary chain link fencing panels can be installed on diverse terrains such as sand, soil, asphalt, and concrete, a perfect choice for any event or site condition. Chain link fence panels are made of galvanized chain link mesh framed with tubes, powder coating and aluminized coating available for additional corrosion protection. Quality Assurance All our temporary chain link fencing products are manufactured according to ASTM A392-06 standards. This certification attests to the superior resistance our fences offer against exposure and corrosion. Heavy zinc coating enhances durability, ensuring long-lasting performance and security. Features Our chain link fencing can be supplied in various materials and finishes. Portable fence panels can be quickly installed, maintained, and removed. Customized sizese: Available in options of 4′, 6′, and 8′ heights, with a 1 5/8″ line post, meeting specific security fencing needs. Common Export Specifications 1)1000 feet of 6-foot-tall temporary chain link panels and posts for the Albuquerque, NM area. 2)Black coated chain link temporary fence panels, 8 feet tall and up to 10 feet wide, total 130 linear feet. 3)Temporary chain link fence panels with 1 3/8″ and 1 5/8″ tubing, 1200 panels 6 ft by 12 ft, shipping to Seattle, WA, USA. 4)Temporary fence panels available in 6ftx10ft and 8×10 sizes, featuring welded wire and chain link with bases, gate hardware, and clamps. 5)Chain Link Temporary Fence Panels with Braces: 6’H x 8’W Panel, 11-1/2 gauge chain link with 1 vertical and 1 horizontal brace. 6’H x 10’W Panel, 11-1/2 gauge chain link with 1 vertical and 1 horizontal brace, includes walk gate. 6’H x 8’W Panel, 11-1/2 gauge chain link, no braces. 6)Temporary Fencing Chain Link Type of Galvanized Mild Steel: Total Coverage: Approximately 1800ft, including 3 gates with all necessary hardware for assembly and installation. Areas to Enclose: RHEN II (65PLT) West: 370ft with a gate. RHEN II (65PLT) East: 540ft with a gate. RHEN III (69PLT): 870ft with a gate. Specifications: Frame and Middle Pipe Diameter: 25mm. Chain Link Mesh Size: 100x100mm. Wire Diameter: 4mm. Surface Treatment: Galvanized. Panel Width: 3.65m. Height: 1800mm. 7)Temporary Chain Link Mesh Construction Fencing for South Africa Project Dimensions and Structure Size: 10 feet in length and 6 feet 7 inches in height. Mesh Hole Size: 2 inches by 2 inches. Wire Diameter: 0.09 inches. Post Specifications: Posts 1.89 inches in diameter with a wall thickness of 0.1 inches and a height of 6 feet 7 inches. Central and Ledger Components Diameter of 1.26 inches and a wall thickness of 0.08 inches. Base and Installation Base Specifications: The base is sized at 1.89 inches in diameter, 2 feet 11 inches in length, and 1 foot 4 inches in width. Foot Coupling Tube: 1.26 inches in diameter, with a wall thickness of 0.08 inches and a height of 5.91 inches. Finishing and Coating Zinc Coating: The components, including the foot, posts, beam post, central ledger, and ledgers, are pre-hot dipped with a zinc coating thickness of 0.59 mils (15μm), while the chain link mesh features a zinc coating thickness of 0.335 mils (8.5μm), with enhanced corrosion resistance. Packaging and Weight Packaging: Each set is carefully packaged on a pallet and secured with stretch film, ensuring safe transportation and storage. Weight: Each fencing set weighs 97 pounds, reflecting its robust construction and durability. Parts and Accessories The fencing material includes chain link mesh, posts, central beam post, central ledger, plastic caps, U-clips, connectors/clamps, bolts and nuts, and all necessary components for assembly and installation.

DEAR INVESTORS CONTACT(WHATSAPP: +14699887807) There are two types of trading organizations: Private and Banking. We partner with a Private Trade Organization that offers a program to assist with large business projects in diverse industries. Please see details below. *****$135+ Million Trading Program Options available to Investors 1. Investor can have their Fund ready for Trade in the following forms: Fund on Deposits, Sovereign Bonds, or Gold Bullion “Block Fund Guarantee” via MT760 Swift to the Trader (or Monetizer) Bank. (135 Million is the minimum to be in the program with no limit.) 2. If preferred, Investor can also use their SBLC, BG and MTN that are blocked via Swift MT760 or MT542 to the Trader/Monetizer Bank. *****Documents needed to participate in the Trade Program 1. For Cash Fund, Gold Bullion, and/or a Bank Instrument such as: SBLC, MTN, or BG that has been issued, the Investor needs to provide the following items: CIS (Customer Information Sheet) and Bank Confirmation Letter or RWA Letter including 2 business bank officers’ cards that signed the letter. If you already have a KYC, you may submit it. ******Investor’s profits from theTrade Program 1. First, the Trade Desk does a 75% LTV (Loan-to-Value) of $135+ Million Ex. ($135M x 75% = 101.25M) 2. Commission paid to Investor is structured as follows: a. 90% - Client Profits (Paid out Monthly or Weekly, Client’s choice) b. 10% - Trade Desk Profits (Paid the same time as the Client) 3. Client monthly earnings = $101.25M x 90% = $91.125M a. 10-Month earnings = $91.125M x 10 mo. = $911,250,000.00 b. Weekly earnings = $91.125M divided by 4 = $22,781,250.00 *****Please contact me to speak to our liaison to get started.

Minimum Order: 1 bags

2024 MODEL MINI EXCAVATOR 1.8 TON RATED KUBOTA ENGINE 10.2KW XHD 1.8 *Hydraulic *Expandable Tracks *Custom Made By Top Brand Manufacturer! * Swing Boom *Free 200mm, 420mm, 600mm Bucket and Hydraulic Quick Hitch and Tool Box *2Years Full Warranty Specification: Operating weight: 1800kg Overall dimension(L*W*H):3100 *1100*2280mm Engine:Kubota D722 Max digging depth: 2050mm Max digging height 3010mm Max dumping height 2285mm Max vertical digging depth 2010mm Max digging radius 3260mm Extras- 8X4 2.8 ton rated Trailer with loading ramps (Electric Brakes )

Minimum Order: 300

If you have any questions, please feel free to contact me：Skype：+852 62290079 WhatsApp：+852 62290079 Telegram：Heise420 Signal：+852 62290079 Gmial：tombrt666@gmail.com Threema , ：HWS5AVAB We sell directly from the factory, with the best prices and abundant inventory. Cas： product name; Synthetic cannabinoid 5cladba precursor Adbb precursor JWH018 SGT78 UR144 5cl、6cl , 、5cladba、5cl-adb-a, 5CLADBA, ADBB, jwh-018 Opioids 71368-80-4 Bromazolam 40054- 69- 1 Etizolam 14680-51-4 Metonitazene Benzos Powder Flubromazolam CAS 613526-40-6 Nitrazolam CAS 28910-99-8 Flubrotizolam CAS 57801-95-3 Flubromazepam CAS 2647-50-9 Protonitazene CAS 119276-01-6 N-desethyl Etonitazene/N-desethyl isotonitazene CAS 2732926-26-8 Isonitazene CAS 191790-79-1 High quality Eutylone, eutylone etonitazepyne CAS 148553-50-8 Pregabalin EUtylone NEW EU KU New Etizolam Pmk oil/powder Cas 28578-16-7 BMK Oil/Powder cas 20320-59-6 BMK Powder cas 5449-12-7 BMK 16648-44-5 CAS 52190-28-0 Cas1451-83-8/cas 1451-82-7 Cas 49851-31-2 2-Bromo-1-Phenyl-1-Pentanone Cas 101-41-7 CAS 69673-92-3 cas123-75-1 Pyrrolidine Cas 236117-38-7 1-Propanone, 2-iodo-1-(4-methylphenyl)- cas 5337-93-9 Methylpropiophenone Cas 1009-14-9 Valerophenone BDO CAS 110-63-4 / 1,4-Butanediol liquid 1 4BDO ,GBL Pure Iodine Prilled Iodine Balls Activated Carbon Iodine CAS: 7553-56-2 A. Own factory, controllable quality, stable supply B. Provide sample testing C. Ex-factory price, no middleman to make the difference D. We have nearly twenty years of industry experience, as well as transportation experience 1.With many years of experience in export shipping, we have professional and experienced cooperative forwarders to ensure that goods can be delivered safely and efficiently in a variety of ways. Our advantage 2.High quality, competitive price. 3.All purity >99%. 4.We are a manufacturer and can provide high quality products at ex-factory prices Fast and safe delivery. 5.Rich experience in mass container handling in Chinese seaports. 6.Fast delivery by shipping company. 7.According to the buyer's special requirements, pallet packaging is adopted. 8.The best service after delivery. We are willing to provide first-class products to meet the needs of every customer. If you are willing to provide the specific specifications of the required products and the place of delivery, we will provide you with a competitive price. K2 spice

Minimum Order: 1 bags

Jinggong Cast Iron Base plates / Bed Plates, are one of the modern industrial gauges. It is suitable for a variety of inspection, precision measurement of the reference plane. Used for mechanical testing benchmarks of machine tools, dimensional accuracy or shaped inspect parts for deviation, and as close crossed, is an indispensable basic tool in the machinery manufacturing. Cast Iron Base Plates is widely used in machining, tool shop, machine (the seizure) repair workshop, large equipment base, measuring rooms and precision machining of the inspection, measurement and grinding, and can accurately measure, test workpiece flatness, straightness and tolerance of the angle.

Minimum Order: 1 bags

The principle of the crafting route of the marking platform The formulation of the machining process of the cast iron scribing plate can generally be divided into two steps. The first is to formulate the process route of cast iron scribing and plate processing, and then determine the equipment used in each process, process size and process equipment, working hours quota, cutting specifications, etc. These two steps are interrelated and should be analyzed comprehensively. cast iron scribing plates The formulation of the cast iron slab process route is to formulate the overall layout of the process. The main task is to select the processing method of each working surface, determine the processing sequence of each working surface, and the number of processes in the entire process. The general principles for establishing a process route for cast iron scribing plates are as follows. 1. Process the datum surface first During the processing of the part, the surface as the positioning reference should be processed first, so as to provide a precise reference for the subsequent processing as soon as possible. It is called "benchmark first". 2. Divide the processing stages Surfaces with high processing quality requirements are divided into processing stages, which can generally be divided into three stages: rough processing, semi-finishing and finishing. The main purpose is to ensure the processing quality; facilitate the rational use of equipment; facilitate the arrangement of the heat treatment process; and facilitate the discovery of blank defects. 3. Hole first, then surface For parts such as square boxes, brackets and connecting rods, the plane should be processed first and then the holes should be processed. In this way, the holes can be positioned on the plane to ensure the position accuracy of the plane and the holes, and it is convenient to process the holes on the plane. 4. The main surface finishing (such as honing, grinding, fine grinding, etc.) should be carried out at the last stage of the process route to prevent the finishing surface from being damaged due to the transfer and installation between processes. Jinggong Measuring Tools Producing Co., Ltd is specializing in manufacturing and exporting all kinds of cast iron products，especially for cast iron floor plates, cast iron surface plates, cast iron clamping plates, cast iron angle plates, cast iron box table and other machine tool castings. Our engineering enables us to design the cast iron plates and tables according to DIN Standards, Indian Standards and Chinese Standards, machining by CNC machine tools and install in the world market.

Minimum Order: 1 bags

The casting methods of cast iron tables Small cast iron tables generally use resin sand. On the one hand, it is to facilitate sand removal. There are also the following reasons: 1. Relatively speaking, lost foam casting has great advantages over traditional sand molds for the production of single or small batches of automobile covering parts, machine tool beds and other large molds. It not only saves expensive wood mold costs, but also facilitates operation. , It shortens the production cycle, improves the production efficiency, and has the advantages of high dimensional accuracy, small machining allowance, and good surface quality. 　 2. The resin sand mold has good rigidity and high sand mold strength in the initial stage of casting. This makes it possible to use the graphitization expansion of the cast iron solidification process to effectively eliminate shrinkage and shrinkage defects, and achieve fewer and no risers for gray cast iron and ductile iron. 3. In the production of solid casting, polystyrene foam is used to form furo resin self-hardening sand. When the molten metal is poured into the mold, the foamed plastic pattern quickly vaporizes under the action of the high- temperature molten metal, burns and disappears. The molten metal replaces the original foamed plastic position, and cools and solidifies into a solid casting with the same shape as the pattern. cast iron table Jinggong Measuring Tools Producing Co., Ltd is specializing in manufacturing and exporting all kinds of cast iron products，especially for cast iron floor plates, cast iron surface plates, cast iron clamping plates, cast iron angle plates, cast iron box table and other machine tool castings. Our engineering enables us to design the cast iron plates and tables according to DIN Standards, Indian Standards and Chinese Standards, machining by CNC machine tools and install in the world market.

Minimum Order: 1 bags

Jinggong Cast Iron Layout Plates are used in the dynamic test and debugging of equipments, engines, electric motors and so on. They have well plane stability and tenacity. T-slots are available on their surface for fixing the experimental equipment. Usually the layout plates installed at the ground level. If need large-scale, joint several pieces together is ok. l Material: GG20-GG30 (HT-200-HT-300). l Standard: flatness according to DIN876 and T-slots according to DIN650. l Specification: 750x1000-3000x8000mm or customize.

Minimum Order: 1 bags

The automotive air intake system is an important part of the car, it is an important part of the engine function, collecting air and directing it to the various cylinders. Main material: Grey cast iron/ cast steel/ aluminum alloy… We can manufacture all kinds of automobile air intake system parts according to your specified drawing.

Minimum Order: 1 bags

Sintering Pallets are of important parts of sintering machines. The pallets are consists of pallet body, roller cover, wheel, axle, side wall plates, side sealing plates of ignition furnace, grate bars, bolt insulating pieces, wearing plates etc. Jinggong Sintering Pallets are made of nodular cast iron or special steel, have the features of reasonable design, reliable performance and low energy consumption. The Sintering Pallets, as serial products for updated sintering machines, could meet needs of new made sintering machines, as well as current sintering machines with areas of 18m2, 24m2, 27 m2, 33m2, 36m2, 39 m2, 50m2, 75m2, 90m2, 105m2, 110m2, 130m2, 180m2, 265m2, 300m2, etc.

Minimum Order: 1 bags