Offers to Sell

Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxides from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standard and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns into liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emission gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH- GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by this system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.

Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology.During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be control to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standard and can be fully applied to burners, diesel engines, generators etc. This system is very safe because the temperature setting is rigorous and the machines is stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.

Minimum Order: 1 bags

Soft Drinks Netherlands BV is a solid and reputed international wholesaler and trader located in The Netherlands. We buy and sell fast moving consumer drinkable goods to a host of markets worldwide. We deal with A-brand luxury products focusing on Mineral water, beers, Whisky,Soft drinks, Energy drinks & Vodka drinks. Fanta Drinks 250ml Packaging : 250ml Can 24 Cans/Tray 108 Trays/Pallets 26 Pallets/20ft Container 32 Pallets/40ft Container Fanta Drinks330ml Packaging : 330ml Can 24 Cans/Tray 144 Trays/Pallets 17 Pallets/20ft Container 25 Pallets/40ft Container Fanta Drinks 500ml Packaging : 500ml PET 24 bottles/Case 54 Cases/Pallet 22 Pallets/20ft Container 32 Pallets/40ft Container Fanta Drinks 1000ml Packaging : 1000ml PET 12 bottles/Case 60 Cases/Pallet 19 Pallets/20ft Container 27 Pallets/40ft Container Sprite Drinks 250ml 1500ml Packaging : 1500ml PET 12 bottles/Case 60 Cases/Pallet 19 Pallets/20ft Container 27 Pallets/40ft Container -Multi Flavors -Available in Cans and Pet Bottles. -Shelf Life : 24 Months

Product Description 5KW Auto Spray Painting Machine For Wooden Door High quality automatic spraying machine for wooden door Product Application With the process of society, munal spraying has failed to meet the needs of modern industry. So, it is necessary to use automatic spraying take place of manual spraying. This spraying mchine is professional application for wooden door coating . Its design depend on the shape and size , coating process of wooden door. This machine spray a wooden door both two sides in 3 minutes. SPECIFICATIONS FOR SPRAYING MACHINE Control system 1. Japanese OMRON PLC 2.Taiwan WEINTEK Color industrial touch screen 3. Schneider Electric switch and Power Supply 4. Japanese OMRON relay 1.Precision divider 2.Taiwan CPG Gear motor 3. Japanese Mitsubishi frequency converter Product rotation platform 1. Precision divider 2. Can be 90 degrees, 180 degrees rotation, continuous rotation 3. multi-station rotation Spray gun 1. Japanese ANEST IWATA Paint supply system 1. Amercian GRACO 308 diaphragm pump 2. Pneumatic agitator produce from Taiwan,China 3. Taiwan AIRTAC Solenoid valve, Pressure regulating valve, Pressure gauge Power supply AC220V50HZ, Single phase three wire

Details Material: Semiconductor ceramics/High temperature film Applicable temperature range：-30~90℃ Output signal: analog signal output Advantages 1. The product is a thin film thermistor 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -30~+90℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as copiers, printers, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General parameters ResistanceR25℃： 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a sensors suppliers, we provide sensor solutions, smd thermistor, thermistor resistor and etc. Want to know more? Please contact us.

Temperature Sensor For Home Appliance For Pellet Grill For Food For Instrumentation For Pet Box & Tank For Printer & Copier For Vehicle Electronics For Green-car For Fire Alarm For Medical For HVAC Thermistor NTC Thermistor PTC Thermistor Digital Thermistor Other Sensors Temperature And Humidity Sensor/Detector/Probe Temperature Switc Gas Sensor Dust Sensor TOPOS is a thermistor suppliers and sensors factory, we provide termistor ntc ptc, two types of thermistors, ntc and ptc thermistor, ptc and ntc thermistor, ntc ptc thermistor, thermistor resistor, ntc resistor and etc. Want to know different types of thermistors or more? Please contact us.

Temperature Sensor For Home Appliance For Pellet Grill For Food For Instrumentation For Pet Box & Tank For Printer & Copier For Vehicle Electronics For Green-car For Fire Alarm For Medical For HVAC Thermistor NTC Thermistor PTC Thermistor Digital Thermistor Other Sensors Temperature And Humidity Sensor/Detector/Probe Temperature Switc Gas Sensor Dust Sensor TOPOS is a temperature transducer suppliers, we provide sensor products, sensors used for temperature measurement, temperature transducer, thermistor sensor, negative coefficient resistor and etc. Want to know temperature sensors types or more? Please contact us.

Details Material: Semiconductor ceramics Applicable temperature range：-40~120℃ Output signal: analog signal output Advantages 1. The product is smd ntc thermistor 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -40~+120℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as copiers, printers, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General parameters ResistanceR25℃： 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a sensors suppliers, we provide surface mount thermistor, smd thermistor, ntc smd, thermistor resistor and etc. Want to know more? Please contact us.

Details Material: semiconductor ceramic resistor chip / high-efficiency conductive Dumet wire/glass Applicable temperature range: -45~500℃ Output signal: analog signal output Advantages 1.MTG2-1/2/3/4 series products are radial lead single-ended glass package type 2. Good stability and high reliability 3. Wide resistance range: 2KΩto500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under harsh conditions such as high temperature and high humidity 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -50℃to+300℃ 8. Fast heat induction and high sensitivity Application 1. Temperature control and temperature detection of household appliances such as induction cooker, electric pressure cooker, rice cooker, electric oven, disinfection cabinet, water dispenser, microwave oven, electric heater, etc. 2. Temperature detection and temperature compensation of medical equipment (such as 3d printer bed thermistor, copier, etc.) 3. Temperature control and testing of industrial, medical, environmental protection, meteorological, and food processing equipment 4. Temperature protection of rechargeable battery pack and charger 5.Temperature compensation of instrument coils, integrated circuits, quartz crystal oscillators and thermocouples General Parameter 6.ResistanceR25℃： 7.5K 8.10K 9.15K 10.20K 11.50K 12.100K 13.200K 14.B value(R25/R50) 15.3380 16.3950 17.3470 18.4200 19.3977 20.4100 21.4200 22.Tolerance 23.1% 24.2% 25.3% 26.5% 27. 28. 29. Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a industrial sensor suppliers, we provide 3d printer thermistor, ntc thermistor, temperature sensors and etc. Want to know more? Please contact us.

Details Material: NTC glass-sealed thermistor/plastic cable tie/Teflon wire Applicable temperature range：-30~150℃ Output signal: analog signal output Advantages 1. Fast cable tie shell, which can be quickly installed and used. 2. Good stability and high reliability 3. Wide resistance range: 2~500KΩ 4. High resistance and B value accuracy 5. Glass package, can be used under high temperature and severe change 6. Small size, sturdy structure, easy for automatic installation 7. Operating temperature range -30~+150℃ 8. Fast heat induction and high sensitivity Application Applications of fire alarm using thermistor include temperature measurement of fire-fighting corridors, school fire-fighting temperature monitoring, school high-temperature smoke detector and fire alarm heat detector for the dormitory, etc. General parameters ResistanceR25℃： 5K 10K 15K 20K 50K 100K 200K B value(R25/R50) 3380 3950 3470 4200 3977 4100 4200 Tolerance 1% 2% 3% 5% Note: What is the B value: A material constant that describes the resistance-temperature relationship. The value of B can reflect the scale of resistance to temperature change between two specific temperatures. As the temperature changes, the resistance value of a product with a large B value under the same conditions changes more, that is to say, it is more sensitive. TOPOS is a industrial sensor manufacturers, we provide thermistor temperature sensing alarm mini project, thermistor temperature sensing alarm pdf, applications of fire alarm using thermistor, fire alarm using thermistor ppt, high temperature smoke detector, smart heat detector, wireless heat detector for garage, ntc thermisto and etc. Want to know heat detector price or more? Please contact us.

OEM LDPE HDPE Poly Plastic Bag For Clothes Handle Shopping Bags Custom High Quality Plastic Die Cut Patch Handle Shopping Bags Benefits of Custom Die Cut Plastic Bags. Our printed custom die cut handle bags can hold a wide range of items that minimize the risk of ripping and tearing. They are ideal for storing and carrying both small and large items and can be manufactured in a wide range of colors and styles. Added benefits of custom printed die cut handle plastic bags with logo, include: Reminds previous customers of your business/captures repeat customers Custom printed carryout bags are often reused, which generates free advertising until the bag is recycled or thrown away Cost-effective advertising Helps build brand loyalty Item: Custom High Quality Plastic Die Cut Patch Handle Shopping Bags Size&Thickness: Custom based on customer's requirement Design Printing: Custom Design Gravure Printing(11 Colors MAX) Feature: Heavy Duty, Eco-friendly and Perfect Printing Material: HDPE/LDPE/Bio-Pla , stic(EPI, D2W, Cornstarch), etc Application: Shopping/Promotion/ , Boutique/Grocery, etc Quality Control: Advanced Equipment and Experienced QC Team will check material, semi-finished and finished products strictly in every step before shipping Samples: 1). Free & Nice stock samples offered 2). Customized samples 5-10 working days (Send by Express) 3). Refund Part/Full sample fee after deposit received MOQ: 20,000pcs Deliv , ery Time: 10-15 working days after design confirmed. Shipping Port: Guangzhou/Shenzhen/Hongkong Pa , yment: T/T, Paypal,Western Union, Trade Assurance accept 50% deposit,and 50% balance before shipment OEM LDPE HDPE Poly Plastic Bag For Clothes Handle Shopping Bags 0 OEM LDPE HDPE Poly Plastic Bag For Clothes Handle Shopping Bags 1

Sino-VR is vacuum units create vacuum in transformers and other equipment. Sino-VR is a double-stage vacuum system. The first stage is a rotary-vane vacuum pump achieves 0.5mbar vacuum. And the second stage booster could achieves 0.0005mbar. Besides, vacuum gauge, controller, buff, etc to ensure the stable performance

Minimum Order: 1 bags

NSH-HLC is a recycling and charging device for Sulfur Hexafluoride Gas(SF6). it is suitable for on-site installation and maintenance of 110KV-220KV GIS switch and 110KV-800KV GIS switches. NSH-HLC is equiped with recovery system, inflatable system, pressurized inflatable system, vacuum system, purification system and so on. Sino-NSH-HLC maintains: -Adopting the international advanced design of refrigerated liquid, reducing the working pressure, meanwhile greatly improving the recovery efficiency. -Equips self-regeneration drying-and-filtering device. One recovery could reduce water down to less than 80ppm(ratio by volume). -Able to evaporate liquefy the SF6 gas then transfer to device. -Flow chart on operation broad, easy handling. -The electrical system has phase protection, phase disable protection. -Adopting air cooling, mobile type, could be operation without water. -Light weight, low noise.

Minimum Order: 1 bags

Sino-NSH-ADK is an air drying system. It is also named dry air regenerator. Sino-NSH-ADK is widely used for various transformer drying application. It can purge clean, dry air into a confined transformer while maintenance personnel carry out routine repairs. It is an alternative to the traditional transformer hot oil circulation drying and nitrogen filling methods. It is applies to air dry and cycle dry for warehouse, packaging, electronics and other industries. Sino-NSH-ADK maintains: -New technology with recycling sorbent flow. Sorbent serves long life. -Dew point: ≤-55℃ —-70℃ -Air pressure: adjustable from 0.02-0.8MPa -Air supply time: with no time limit -Minimum regeneration air consumption -Easy operation and maintenance -Safe and reliable

Minimum Order: 1 bags