Offers to Sell

Buy New Canyon Aeroad CF SLX 7 Di2 C46 2025 ( Semerubike )  Price : USD 2900 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment : Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty SEMERUBIKE is 100% safe, because purchasing products at SEMERUBIKE provide a 100% moneyback guarantee. SEMERUBIKE Address : Jl. Dr. Sumeru No.13, Bogor, Jawa Barat 16112 Site us : www.semerubike.com  Contact Purchase : order@semerubike.com  Phone/Whatsapp : +6281235792174

Minimum Order: 1 bags

Buy New Canyon Aeroad CF SLX 7 Di2 2025 ( Semerubike )  Price : USD 2700 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment : Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty SEMERUBIKE is 100% safe, because purchasing products at SEMERUBIKE provide a 100% moneyback guarantee. SEMERUBIKE Address : Jl. Dr. Sumeru No.13, Bogor, Jawa Barat 16112 Site us : www.semerubike.com  Contact Purchase : order@semerubike.com  Phone/Whatsapp : +6281235792174

Buy New Canyon Aeroad CF SLX 7 AXS 2025 ( Semerubike )  Price : USD 3300 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment : Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty SEMERUBIKE is 100% safe, because purchasing products at SEMERUBIKE provide a 100% moneyback guarantee. SEMERUBIKE Address : Jl. Dr. Sumeru No.13, Bogor, Jawa Barat 16112 Site us : www.semerubike.com  Contact Purchase : order@semerubike.com  Phone/Whatsapp : +6281235792174

Minimum Order: 1 bags

Liquid ring vacuum pump with flange or threaded end for suction and exhaust 2BV series liquid ring vacuum pump is suitable for suction gas and vapour ,and the suction pressure can reach 33mbar (97% vacuum degree ).When the liquid ring vacuum pump works under the condition that the suction pressure is near the limited vacuum (saturated pressure of the operating liquid )for a long time ,it should couple with the cavitation protection pipe in order to protect the pump .When it is used as a compressor ,the maximum pressure is 0.26mpa.As a new generation of energy-saving pump,2BV series liquid ring vacuum pump will replace the SK and 2SK series liquid ring vacuum pumps and W,WY,WL series reciprocating vacuum pumps completely with their superior performance and advantages . 2BV6 series liquid ring vacuum pumps and compressors are mainly used for pumping the explosive gas or working in the flammable and explosive environment. The technical parameter of each type is the same as the corresponding type of the 2BV2and 2BV5 series pumps. Advantages: 1. The direct-coupled design is easy installation, and it can save space. 2. The pump has the cavitation protection port opens (or connects with the separator) in the case of ensure maximum suction effect to eliminate the noise of cavitation and protect the pump 3. 2BV whole series are all use the bronze impeller with high strength and raise its corrosion resistance and durability .If the liquid flows parts adopt stainless steel ,the pump can work in the more hard condition . Application: Pulp & paper industry: black liquid evaporation, vacuum dehydrator, degassing system of raw materials and white water, suction tank, couch roll, absorption-shift roll and transmission roll, Anti-wind box. Chemical industry: methane gas recovery, petroleum recycles, gas collection, exhaust compression, vapor collection, filtration and decertation, polyester Production, PVC Production. Power plant: condenser exhausting, water box priming, flue gas desulfurization, fly ash conveying, geothermal gas removal, Vacuum Pressure impregnation for transformers. Sugar industry: Sewage filtering, CO2 production etc

Minimum Order: 1 bags

Bico Injetor Common Rail DSLA153P1710 Tina #Diesel Control Valve F00R J00 995# #Diesel Control Valve F00R J01 052# #Diesel Control Valve F00R J02 506# China-Lutong is the specialist Fuel Injection System Parts suppliers and manufacturers. PASSED ISO9001:2015 Certification Diesel Engine Parts Factory.. Contact Us: Whatsapp/Wechat/Viber /Facebook：+86-133/869/01379

Minimum Order: 10 long tons

Diesel Control Valve FOOR J03 556 Tina #Diesel Control Valve F00R J00 995# #Diesel Control Valve F00R J01 052# #Diesel Control Valve F00R J02 506# China-Lutong is the specialist Fuel Injection System Parts suppliers and manufacturers. PASSED ISO9001:2015 Certification Diesel Engine Parts Factory.. Contact Us: Whatsapp/Wechat/Viber /Facebook：+86-133/869/01379

Minimum Order: 10 long tons

Diesel Control Valve F00R J02 506 Tina #Diesel Control Valve F00R J00 995# #Diesel Control Valve F00R J01 052# #Diesel Control Valve F00R J02 506# China-Lutong is the specialist Fuel Injection System Parts suppliers and manufacturers. PASSED ISO9001:2015 Certification Diesel Engine Parts Factory.. Contact Us: Whatsapp/Wechat/Viber /Facebook：+86-133/869/01379

Minimum Order: 10 long tons

Generally speaking, it is not necessary to install a bottom valve because corrosion-resistant pumps usually have their own check valves at the inlet. After the corrosion-resistant self-priming pump is shut down, the liquid in the pump chamber cannot flow back to the original pool and is stored in the pump chamber. Therefore, there is no need to add liquid during the second use. However, it does not mean that the corrosion-resistant self-priming pump cannot be equipped with a bottom valve. Installing a bottom valve will improve the effect, because if the one-way valve is sometimes damaged, the bottom valve will serve as a guarantee and will not idle after installation. If a bottom valve is installed, the effect will be better, because if the one-way valve is sometimes damaged, the bottom valve serves as a guarantee and will not idle. After installing the bottom valve, it will also effectively ensure the effective suction range of the pump. Another special case, but if the difference in suction height is too large, or the diameter of the suction pipe is too large, and the volume exceeds the storage capacity of the corrosion-resistant self-priming pump chamber, it cannot work normally. At this point, a bottom valve must be installed to ensure safe and fast self- priming. Therefore, the self-priming pump does not require the installation of a bottom valve, but it does not mean that the bottom valve cannot be installed. After the installation of the bottom valve, the suction range of the pump will be more guaranteed, especially for some small corrosion-resistant self-priming pumps. Due to the fact that small corrosion-resistant self-priming pumps generally do not have one-way valves and achieve self-priming effect through the vacuum generated by the instantaneous pump body, the suction effect of the pump will be better after the bottom valve is installed.

Minimum Order: 1 bags

Mould Oscillation and Deflection Detection Instrument Overview The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table’s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the given amplitude, frequency and waveform deflection characteristics. The actual oscillation parameters of the mold oscillation table during the operation and production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould’s production process parameters in real time according to the real- time situation of the on-site production. The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range. The structure of the instrument Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system. There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users. The functions of the system 1. Adopting mould oscillation X/Y/Z three-dimensional data acquisition, using high-precision sensor system and high-sensitivity axial accelerometer, comprehensive detection of equipment oscillation state, including: 1) Detect the oscillation frequency of the mold oscillation table 2) Detect the amplitude of the mold oscillation table 3) Detect the deflection rate of oscillation 4) Detect the lateral deflection, longitudinal deflection, phase, and phase difference of the mold oscillation table 5) Three-dimensional display of the oscillation trajectory, and the oscillation table trajectory can be viewed from all sides of the oscillation table 6 (X-Y, X-Z, Z-Y) 2. The software system adopts the design of man-machine interactive graphic interface, which can display the mold oscillation state in real time. The software functions include: 1) Real-time data curve display: oscillation waveform, oscillation frequency, signal superposition analysis 2) Single-axis curve display, multi-axis curve display, amplitude, acceleration, three-dimensional graph 3) View historical curve 4) Generate test report 5) Give a warning prompt 6) Spectrum analysis function 7) Long-term storage of data 3. Portable measurement method, which can provide handheld detection equipment with wireless remote transmission, and the operation is simple. 4. Provide an overview of inspection parameters under the full screen, displaying all data including oscillation parameters and process parameters. At the same time, the calculation and display of the oscillation spectrum is completed in real time, which is used to evaluate the waveform distortion of the entire oscillation table, and to determine whether there is a problem with the installation of the oscillation device. 5. Alarm management. Record each alarm data under real-time alarm conditions to analyze the cause of the alarm and evaluate the impact of the alarm on production. 6. Parameter setting. Users can set the ideal oscillation value and normal working range of various steels online. We also can set the alarm limit, and the storage time of the database etc. 7. After charging the device once, it can work continuously for more than four hours. 8. Integrate embedded processing equipment to realize data collection, display, analysis, reporting and other functions. 9. According to the mold characteristics and user requirements, it can be flexibly configured, wich is suitable for all types of molds such as square billets, slabs, round billets and other mold oscillation tables. 10. Support wired and wireless data transmission functions, easy to use. 11. Use the laptop to receive the collected data, can be used for the operation test on site, and can analyze and process the data conveniently. The features of the system 1. The actual oscillation state replaces the ideal oscillation state. The actual oscillation state of the table is used to formulate a control strategy, so that the oscillation table can be used to produce products with more accurate oscillation. 2. Convenient detection method. The equipment can be used for on-site inspection at any time, and the production site can grasp the operating status of the on-site equipment in time, so that we can make production adjustments to the equipment at any time. 3. Efficient working methods and processing platforms. The high-integration equipment developed by embedded technology can work in high temperature and harsh environment. This system can comprehensively detect XYZ three-axis data, and realize real-time data analysis and processing with high-speed data operation and processing platform. 4. Powerful database function. The database adopts the mode of computer automatic management and operator's manual assistance management, and there are tables for recording historical data and alarm data and working parameter setting table of monitoring system inside the database. By adjusting the output range, the best output effect can be obtained.

Minimum Order: 1 bags

MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets’ quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production. The new-generation taper measuring instrument developed by Wuhan CenterRise M&C Engineering Co., Ltd. adopts imported high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths. Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports. The main features 1. Easy to calibrate, stable performance, easy to operate 2. Self-supporting, self-aligning, self-balancing 3. High measurement accuracy 4. LCD data reading 5. Fast response, real-time display reading 6. Adjustment of dynamic intelligent system 7. Lithium battery power supply, suitable for on-site use of mobile operations 8. The continuous measurement time is more than 36 hours 9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement 10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement 11. Applicable to various arc, parabolic and straight molds The performance and index 1. Measuring range: -3°~ +3° (measurement length can be customized according to users’ needs) 2. Measurement accuracy: 0.01mm 3. Temperature range: -25℃~+85℃ 4. Linearity deviation: -0.03mm ~ + 0.03 mm 5. The longest usage time after fully charged: > 36 hours 6. The longest storage time after fully charged: 2 months The main components 1. Measuring instrument: central measurement and control unit, measuring sensor 2. Measuring stand 3. Standard table: standard surface, support frame, spirit level

Minimum Order: 1 bags

Mould Online Width Adjustment and Taper Measurement Overview In order to meet the needs of producing various specifications of continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient continuous casting. The online mold width adjustment system enables the two narrow sides of the continuous casting slab mold to move inward or outward in small steps until the predetermined width is reached. During the production process, the adjustment of the mold’s width can be completed without stopping the machine. Generally, the online width adjustment of the mold needs to be connected with the online taper measurement of the mold. Only with adjustment and detection can the online adjustment range of the mold be accurately controlled. The components of the system Workstation: host system, system width adjustment control, taper detection. On-site operation box: real-time display of the current control status, manual operation to adjust parameters. Digital Electric Cylinder: Precise digital control of electro-hydraulic drive cylinder, which can achieve high-precision quantitative control. On-line measurement of taper: Install it on the narrow-face copper plate of the mold, and monitor the taper of the narrow-face copper plate in real time. Cooperate with the detection feedback control of the width adjustment system, so as to achieve high-precision adjustment. The technical parameters Adjustable range: 0-1250mm (unilateral) Control accuracy: 0.02mm/0.05mm/0.1mm Step resolution: 0.01mm/0.02mm Running speed: 0-10mm/s Power: 3.5KWl 16-bit encoder: 65536 pulses Weight: 25Kg Shell: high-strength aluminum alloy The functions of the system Realize online width adjustment function Realize the online real-time monitoring function of mold taper Continuous casting production adjustment and non-stop production One-key operation in the main control room, automatic completion High adjustment accuracy and fast speed The interlock control of the continuous casting steelmaking system can realize automatic steel pouring

Minimum Order: 1 bags

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product (CCD) Overview The surface quality inspection of high temperature cast product is of great significance to the repair of cast product’s defects and the hot delivery of hot cast product. The ZSQ-T series of online surface quality inspection equipment for casting billets developed by Wuhan CenterRise M&C Engineering Co., Ltd can detect the defects such as scratches, cracks, holes, pits, edge cracks, edge defects on the surface of the cast products, and meet the customer's requirements for the quality inspection of the surface of the cast product. The principle of the system The ZSQ-T200 online surface quality inspection system for continuously cast products adopts the principle of optical imaging and uses a CCD image sensor to input the surface image of the cast products to be detected into the computer, and then the obtained image is processed by special image processing software to find out whether there is any defect in the image. After the defects in the image are obtained, the obtained defects are classified through a special self-learning system, and finally the requirements of the computer to automatically identify the surface defects of the cast products are achieved. The composition of the system 1. Optical part: The optical part is composed of multiple fixed-focus lenses and linear CCD, which mainly realizes scanning and imaging of the surface of the cast products. 2. Lighting part: The lighting part is composed of a high-brightness LED array and a cylindrical lens, which realizes high-brightness and high- uniformity lighting on the surface of the cast products. 3. Mechanical structure part: The mechanical structure part mainly realizes the adjustment, installation and fixing of the optical part and the lighting part, and consists of the imaging head (optical part), light box (lighting part), bracket and control cabinet. The structure is required to be stable and reliable. 4. Real-time processing: The real-time processing part is completed by the multi-CCD data real-time sampling processing unit (high-speed DSP) independently developed by Wuhan CenterRise M&C Engineering Co., Ltd. 5. Hardware part: The hardware part consists of high-speed storage controller and storage hard disk array, Gigabit InternetMAC controller, Gigabit Ethernet PHY. Rj45, and multiple high-speed workstations. 6. Detection software: The detection software mainly realizes the functions of collection, storage, transmission, processing of CCD scanning images, extraction of defects, analysis of defect characteristics, calculation of defect size and position, storage of defect images, generation of cast product’s surface quality analysis reports. etc.

Minimum Order: 1 bags

Infrared/Laser Cut-to-Length Cutting System Overview The all-digital non-contact infrared automatic cut-to-length cutting system developed by Wuhan CenterRise M&C Engineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-48 billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging and operation, and basically maintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is ±1mm, and the system can support 12 strands high-definition CCD image measurement. The features of the system 1. The system adopts advanced digital image processing technology (non- contact type) to identify the length of hot billet online, automatically controls the flame cutting machine to cut the hot billet to a certain length, detects and displays the running status and casting speed, and collects the image information of the moving billet from a long distance through an infrared camera. 2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so that the hot billet can be cut by the actuator. The system can cut the 1-48 billets to length at the same time with an infrared camera. 3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1. The functions of the system 1. Applicable to all kinds of continuous casting machine flame cutting system. 2. Adopt advanced digital image pickup technology. 3. It is not sensitive to other high-intensity light interference, and overcomes the influence of light sources such as sunlight and arc welding. 4. The system provides abundant interfaces, which can communicate with the PLC control. 5. The fixed-length parameters and data can be directly modified by the secondary system to optimize the fixed-length cutting. 6. Historical cutting data is automatically stored, and the system can set rules for historical data. 7. Support the free transformation of fixed length, and a variety of operation modes are available for the operator to choose. 8. Each stream can send out signals such as pre-clamping, clamping, cutting, roll-up, roll-down and return of the cutting car according to the user's requirements. 9. The monitor displays the running status of the current hot billet in real time and displays the corresponding parameters. 10. Data management can be carried out according to shifts, pouring times, days, weeks, months, etc., as well as data management according to specifications, production capacity, quality, etc. 11. Provide automatic, upper and manual cutting control. 12. The detection and cutting precision is high, and the controllable precision is ±3mm. The extension of the system The system can install 1 to 12 cameras. Generally, when one camera cannot meet the requirements, the system can be equipped with 2 to 12 cameras. The camera can be fixed inside and outside the operating room perpendicular to the roller line, and the setting height is generally 3-5 meters, so that the camera can clearly and completely capture the image of the moving billet. High-definition line scan cameras can also be provided to perform high- precision positioning of each strand of cast products. Line scan cameras are used to support up to 12 strand systems, which ensures that the center of the viewing angle, the billet head, and the fixed-length mark are vertical to improve the cutting and fixed-length accuracy. The technical parameters 1. Numbers of caster stands: maximum 12 strands 2. Measurement accuracy: ±1mm 3. Cutting method: flame cutting 4. Fixed length range: 6-12m 5. Matching casting speed: 1.5~4.2m/s 6. Fixed length range: 6-12m 7. Temperature range of cast products: <1000℃ 8. Number of signals: pre-cut, cut

Minimum Order: 1 bags

ZSQ-T100 Online Surface Quality Inspection System for Casting Billet (Eddy Current) The principle of the system The ZSQ-T100 online surface quality inspection system for casting billet adopts the principle of eddy current non-destructive testing. According to the section of the continuous casting machine and the shape of the casting billet, the eddy current sensors of different structures can be used to realize the non-contact surface defect detection on the surface of the billet, and draws the surface defect graph of the billet in real time according to the detection results. The composition of the system Detection frame: The detection frame is used to support the central detection sensor. The height of the detection frame can be adjusted automatically by the motor, so that the central detection sensor is aligned with the casting billet to be inspected. Front and rear vertical nip roll device: The front and rear vertical nip rolls are used to make the inspected billet pass through the central detection head at an even and stable speed. The pressure roller is double pushed by the cylinder and the spring. Central testing host: The central testing host is placed on the testing table. It has a four-sided control disc that scans the surface of each casting billet. Descaling device: It is used to remove the oxide scale on the surface of the casting billet and eliminate the influence of noise on the eddy current flaw detection. System console: used to control the equipment and the entire testing process, control the mechanical actions of each unit and adjust the instrument parameters. It can realize automatic flaw detection online detection. Sensors: Slabs generally use eddy current sensor arrays to test the surface quality of the casting billet. Square billets, round billets and shaped billets generally use through-type eddy current probes to test the surface quality of the casting billets. The main technical index of the eddy current testing on the surface of continuous casting billets 1. The objects of flaw detection: slabs, round billets, square billets and shaped billets of various sizes. 2. The steel grade of the casting billet: ordinary low-carbon steel or alloy steel. 3. Detection temperature: 400~1000℃. 4. Detection speed: ≤3~40m/min. 5. Allowable speed fluctuation range: 0~40m/min. 6. Detection of defect types and sizes: scratches with a depth or height greater than 1.5mm, wrinkled skin lines, cold splashes, bumps, pits and longitudinal facial cracks, transverse cracks, mesh cracks, and subsurface inclusions with a depth greater than 3mm. 7. Blind spot for flaw detection at the end of the casting billet: 25mm. 8. Detection frame area: ≤3m (transmission line direction)

Minimum Order: 1 bags