Offers to Sell

Compatible GPON OLT SFP Class C+ TX 1490nm2.5G RX 1310nm 1.25G 20km SC DDM Transceiver Module Description The GIGAOPTO's GTS-SGT21-20DCC is a high performance transceiver module for single fiber communications using a 1490nm continuous-mode transmitter and a 1310nm burst-mode receiver. It is designed to meet ITU G.984.2 Class C+ requirements for optical line terminal (OLT) applications. The 1490nm DFB LD transmitter has automatic power control (APC) function and temperature compensation circuitry to ensure stable optical power and extinction ratio over all operating temperature range. The transmitter meets Class 1 eye safety per IEC60825 and CDRH standards. The receiver has a hermetically packaged APD-TIA (trans-impedance amplifier) pre-amplifier and a limiting amplifier with LVPECL compatible differential outputs. It features a Burst Packet Detect (SD) output which is LVTTL compatible. The SD output will come high after receiving the burst packet. The GPON OLT transceiver module provides digital diagnostic information of its operating conditions and status, including transmitting power, laser bias current, module temperature, and supply voltage. Calibration and alarm/warning threshold data are written and stored in the internal memory (EEPROM). This SFP transceiver module has done sampling test under most famous brands of routers, switches, servers. The hot swappable GPON SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Passive Optical Network (GPON) communication links, other optical links. Specification Product Packaging SFP Power Supply Voltage 3.3V Optical Connector SC UPC Maxim Distance 20km DDM Yes Fiber Type Single Mode Fiber Warranty 3 years Temperature Range 0 to 70°C (32 to 158°F) -40 to 85°C (-40 to 185°F) Data Rate (TX) 2.5Gbps RX Data Rate 1.25Gbps Center Wavelength 1490nm RX Wavelength 1310nm Power Consumption <1.5W Total Current 450mA Laser Type DFB PD Type APD TX Power +3 to +7dBm RX Sensitivity <-30dBm Extinction Ratio >8.2dB RX Saturation >-12dBm Protocols SFF-8472, ITUT-984. Features Single fiber bi-directional data links asymmetric TX 2488Mbps/RX1244Mbps application 1490nm continuous-mode DFB laser transmitter and 1310nm burst-mode APD-TIA receiver Small Form Factor Pluggable package with SC/UPC Connector Single 3.3V power supply DDMI function available with internally calibrated mode Digital burst RSSI function to monitor the input optical power level LVPECL compatible data input/output interface LVTTL transmitter disable control LVTTL transmitter laser fault alarm Fast LVTTL receiver Signal Detect (SD) indication response Low EMI and excellent ESD protection International Class1 laser safety certified Operating temperature range: Commercial: -5°C~70°C Industrial: -40°C~85°C RoHS6 Compliance Application Gigabit-capable Passive Optical Networks (GPON) Compatibility All of GIGAOPTO's GTS-SGT21-20DCC SFP optical transceiver modules are open sourced, can be coded to be fully compatible with worldwide popular brands' devices, e.g. HUAWEI MA5603T, HUAWEI MA5608T, HUAWEI MA5680T, HUAWEI MA5800T, ZTE ZXA10 C300, ZTE ZXA10 C320, ZTE C600, Alcatel-Lucent 7360, Nokia 7360, C-DATA, VSOL, BDCOM. please refer to the P/N correspondence table. If you are interested in knowing more compatibility, you are always welcome to contact us. Compatible Brand Compatible Part Number Compatible Brand Compatible Part Number GIGAOPTO GTS-SGT21-20DCC Huawei 34060694 Alcatel-Lucent 3FE53441BA01 ZTE 033030100160 Nokia 3FE53441BAAA Fiber Home FH-PON-GP-20-C+ Dashan Zhone MXK-GPON-SFP-C+-RSSI Hisense LTE3680P-BC+1DM Calix 100-03417 Eoptolink EOLS-GT-35-D-ZTE1-DM Calix 100-05071 TRUHAN THMPRS4343GDA-DM Calix BVL3AVHFAA HISILICON SSX1T1LTD Ubiquiti UF-GP-C+ Neophotonics 38J0-6537E-KC+ ADTRAN 1442540F1 WTD RTXM167-526 Cisco CGP-SFP-OC SourcePhotonics SPS-43-48H-CP-CDF-SD Generic SFP GPON OLT C+ Superxon SOGQ4321-PSGB BDCOM OLT-GSFP-C+ DON-3448C+ Broadex D34364-SSCB

PRODUCT DESCRIPTION 304 Stainless Steel Pipe Large Diameter Thick Wall Pipe Industrial Pipe Best Buy Stainless Steel Tubes Seamless Pipes Hollow Section Grooved Cold Drawn ASTM A312 304 304L 316L Thickness 9.0mm​ 304 stainless steel pipe is not rust, corrosion resistance, heat resistance, high temperature and low temperature resistance, high hardness and high strength single length is generally 1meters --13 meters, the length is generally 6 meters, other length please consult delivery status: solid melt pickling, polishing surface, degreasing state, groove chamfering, etc. 2.Chemical composition and mechanical property Chemical composition Material C Si Mn P S Cr Ni 304 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.030 ≤18.0-20.0 ≤8.0-10.5 304L ≤0.030 ≤1.00 ≤2.00 ≤0.045 ≤0.030 ≤18.0-20.0 ≤8.0-10.5 Mechanical property Material YS(Mpa) TS(Mpa) EL(%) Hv 304 ≥205 ≥520 ≥40 ≤200 304L ≥175 ≥480 ≥40 ≤200 3.Product show 9.0mm Stainless Steel Tubes Seamless 09.0mm Stainless Steel Tubes Seamless 1 9.0mm Stainless Steel Tubes Seamless 2

Product Description CAS No. 922-67-8 Intermediates Pharma For Methyl Propiolate Methyl propiolate was used in the synthesis of polysubstituted 3- arylaminoacrylate and tetrahydropyrimidin-2-one derivatives. It was also used as a thiol derivatizing agent for capillary electrophoresis. Methyl propiolate is an organic compound with the formula HC2CO2CH3. It is the methyl ester of propiolic acid, the simplest acetylenic carboxylic acid. It is a colorless liquid that is miscible with organic solvents. The compound is a reagent and building block for the synthesis of other organic compounds, reactions that exploit the electrophilicity of the alkyne group. CAS No. 922-67-8 Methyl Propiolate Colourless To Pale Yellow Liquid 0 ITEM CONTENT Alias PROPARGYLIC ACID METHYL ESTER Purity 99% Molecular Weight 84.07 CAS No. 922-67-8 Appearance Clear, colourless to pale yellow liquid Molar mass 84.074 g·mol−1 Hazard classification Eye Irrit. 2 - Flam. Liq. 2 - Skin Irrit. 2 - STOT SE 3 Usage N-3 protective reagent for uridine and thymidine Boiling Point 103-105 °C (lit.) Storage Store at room temperature Personal protective equipment Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter Type Chemical intermediate Flash Ponit 16 °C - closed cup EINECS No. 213-083-5 CAS No. 922-67-8 Methyl Propiolate Colourless To Pale Yellow Liquid 1 Handling and Storage Handling: Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Storage: Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Product Description Chinese 0.8t Crawler Mini Excavator Small Digger Price for Sale Quick Detail: 1. Powerful Engine, KOOP diesel engine/Euro V engine/EPA certified gasoline /Kubota engine for your choices; 2. Adopt famous hydraulic Shut-off valve; 3. The boom and the bulldozer oil cylinder are equipped with high-strength cast steel protective plates; 4. Dig-to-blade and dozer float features are easy to clean up; Specifications: Preformance Parameter Rated Power 7kw-7.5kw Bucket Capacity 0.025m³ Bucket Width 300mm Engine Model Koop192f Optional Engine Briggs&Stratton Opeating Weight 800kg Pump Form Single Gear Pump Set Working Pressure 14Mpa Swing Speed 12rpm Travel Speed 2.2Km/h Gradeability 30° Ground Pressure 19Kpa Max. Digging Force 7.5Kn Dimensions Total Width 720-780mm Total Height 1300mm Total Length 2430mm Min.Ground Clearance 80mm Track Ground Length 1140mm Track Width 150mm Working Range Max.Digging Distance 2450mm Max.Digging Depth 1200mm Max.Digging Height 2350mm Max.Dumping Height 1600mm Min.Swing Radius 1100mm Max.upgrade Height of Bulldozer Blade 120mm Max.Digging Depth of Bulldozer Blade 200mm Notices: 1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm. 2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage. 3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car. 4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground. 5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off. 6. Do not lift materials with buckets. Applications: The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded. Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling. 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 0 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 1 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 2 Our Service: We support OEM/ODM service, we have professional develop research department, like designs, colors, and also products all can be acceptable customized, we have 3 times supervise on quality control through production line before send out. And quality and service is our first principle of company.We keep 12 months warranty, beyond the warranty period, all spare parts offered to you with our cost price (not including freight).By the way, we support 24Hour customer service by email or phone. Please feel free to contact, we are willing to become your friend and business partner. 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 3 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 4 Company Brief Introduction: Mini Excavator, Full Energy, You will become a Big Winner! Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes! And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well. All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated. 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 5 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 6 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 7 Our Company: Mini Excavator, Full Energy, You will become a Big Winner! Qingdao Fullwin Machinery Co., Ltd. is established in 2012, which is a professional dedicated Manufacture of Construction machinery and building equipment, which is affiliated with Hong Kong Hope LLC. Our Headquartered located at Hong Kong, the Export department is located at Qingdao city Shandong Province. The factory is located in Jining city Shandong Province, Until 2022, where we have 9876 square meters, and over 2000 professional experienced l workers here. Our business scope has from Mini Excavator manufacturing from China to Global Agent now. Welcome to Join us as Agent!! 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 8 0.8 Ton Crawler Flexible Operation Mini Digger Excavator 9 Team profile: Fudewang Machinery Co., Ltd. has a production team consisting of highly educated and high-quality talents that integrates factory and foreign trade. Its leader, Mr. Shen, has 30 years of experience in foreign trade, and was once the first enterprise in Qingdao's foreign trade export volume. As one of the first teams to contact with the export of building materials in China, it witnessed the rapid rise and development of construction machinery and engineering machinery, accumulated rich experience in excavator export and production skills, and became a scientific and efficient management system. The team members are young and full of vitality, innovative and brave to meet challenges. With a good sense of social responsibility, he is willing to contribute to improving the status quo of China's machinery technology and safety. Innovation: The most influential excavator manufacturer in China; It is the first company in China to develop and practice a new B2B B2C e- commerce socialized marketing model, and lead the new trend of excavator development based on the needs of large customers, medium and large customers, and small consumers. Looking ahead: With the successful experience of other industries, we pay more attention to service and bring consumers a winning championship experience.

Product Description Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV Quad core 64 bit 4K HDR Android TV Box Android base TV system H.264 1080p 60fps Video encoding H.264/H.265 10bit HDR decoding up to 4K@60fps HDMI 2.0 max to 4K60 output Decoder: • H.265 Main10@L5.1 decoder up to 4K@60fps • VP9 Profile 2 decoder up to 4K@30fps • AVS2 JiZhun 10bit decoder up to 4K@30fps • H.264 BP/MP/HP@L4.2 decoder up to 4K@30fps • Multi-format 1080p@60fps video playback formats, including H.264 BP/MP/HP, H.263 BP, VP8, MPEG-1 MP/HL, MPEG-2 MP/HL, MPEG-4 SP/ASP@L5, AVS+/AVS JiZhun, WMV9/VC1, etc Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 0Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 1Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 2Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 3Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 4Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 5Smart 4k OTT Google Tv Box Quad Core Allwinner H313 Android10.0 ATV 6

Product Description: Rotomoulding Mold is an innovative molding solution with a one-year warranty that can be customized to suit any specific needs. Heat treatment such as annealing is applied to ensure the highest quality of the product, while CNC machining and 3mm thickness guarantee the utmost accuracy and durability. This Rotomoulding Mold is an ideal choice for any application, from bulk production to intricate and detailed designs. It is reliable, cost-effective and easy to use, making it the perfect option for any molding project. Features: Rotational Molding Mold: Customized design, 3mm thickness, 8-10mm wall thickness, customizable weight and 1 year warranty. Rotomoulding Molding Mold: Customized design, 3mm thickness, 8-10mm wall thickness, customizable weight and 1 year warranty. Rotational Mold Molding: Customized design, 3mm thickness, 8-10mm wall thickness, customizable weight and 1 year warranty. Technical Parameters: Property Value Heat Treatment Annealing Tolerance ±0.1mm Warranty 1 Year Size Customized Package Wooden Case Color Silver Surface Smooth Design Customized Shape Vertical / Horizontal Wall Thickness 8-10mm Applications: Rotomoulding Mold, also known as Rotational Molding Mold, is a highly versatile and effective method of manufacturing products. It is often used to create custom-made items with unique shapes, such as plastic containers, fuel tanks, and toy figurines. The process involves heating a mold containing a molten plastic material, which is then rotated at a consistent speed in order to evenly distribute the molten plastic throughout the mold. The production process requires a specific heat treatment to ensure the product is properly formed, with Annealing being the most commonly used technique. The mold is then cooled before being removed from the mold. The resulting product is typically lightweight, with wall thickness ranging from 8-10mm, and is usually made from a strong aluminum alloy. The surface of the product is typically smooth, allowing for excellent product performance. Furthermore, the weight of the product can be customized according to the customer's requirements. Customization: Customized Rotomoulding Mould Service We offer customized Rotomoulding Mould services with excellent quality and competitive price. Our Rotomoulding Moulds are made of aluminum alloy and suitable for rotational molding. We can provide vertical and horizontal shapes with a thickness of 3mm and a smooth surface. We are sure to be your reliable partner for Rotomoulding Moulds, Rotational Molding Moulds, Rotational Molds and Aluminum Alloy Rotational Moldings. Our excellent design and manufacturing capabilities will meet your specific requirements. Support and Services: Rotomoulding Mould Technical Support and Service Rotomoulding Mould is a versatile product that can be used in a wide variety of applications. We provide comprehensive technical support and service to ensure the smooth functioning of your Rotomoulding Mould. Our technical support consists of providing assistance in the selection, use, and maintenance of the moulds. We can also provide advice on the best materials, processes, and tools to use, as well as troubleshooting any issues that may arise. Our team of highly experienced engineers is available to answer any questions you may have. In addition to technical support, we also provide service and maintenance for Rotomoulding Moulds. This includes periodic inspections and maintenance of the moulds, as well as repair and replacement of any damaged or worn parts. We also offer a range of upgrades and modifications to ensure that your moulds are always working at their best. We are committed to providing the best possible service to our customers. If you have any questions or concerns, please feel free to contact us at any time.

12305 - 0T020 Rubber Engine Mounting For Toyota COROLLA 2004 - 2016 Product Description The engine mount is used to fix the engine to the frame. They are made of steel and rubber. The engine side part is connected with each part of the frame. The central rubber section is used to isolate and absorb vibration and road impact. Quick Detail PRODUCT INF ORMATION Brand Name Ivan Zoneko Item Name Engine Mount Model Number 12305 - 0T020 Car Model For Toyota Size OEM Standard Warranty 1 Years Packing Ivan Zoneko Brand Packing or as Customer's Requirements Place of Origin Guangdong China MOQ Sample or trial order is accepted Delivery Time Within 7 days after payment Certificate IS09001, TS16949, SGS Car Model Toyota COROLLA(_E12_) 2004- 2016 2004-2016 Toyota COROLLA Engine Mounting Motor Mounts 12305-0T020 0 Our Advantage 1. We are a modern enterprise technology R&D, production and sales. 2. We have complete production equipment, advanced technology and perfect testing facilities. 3. We have a large stock of RUBBER AUTO PARTS & CHASSIS PARTS. Packaging & delivery Packaging details: 1. Neutral packaging 2. According to customer requirements Port: Guangzhou, China Lead time: Shipped in 20-35days, depond on the QUANTITY.

　　Skeleton oil seals also known as radial shaft seals, play a pivotal role in various mechanical systems. They prevent the leakage of lubricants and the intrusion of contaminants. But what sets skeleton oil seals apart? This article aims to explore the unique structural characteristics of skeleton oil seals. 　　Understanding Skeleton Oil Seals: 　　Skeleton oil seals are named for their distinctive structure, which includes a metal casing or “skeleton” that provides rigidity and shape to the seal. This metal casing is usually coated with an elastomer for better sealing. 　　Structural Characteristics of Skeleton Oil Seals: 　　1. Metal Casing: The metal casing provides the seal with its basic shape and rigidity. It helps the seal maintain its form under pressure and during installation. 　　2. Elastomer Coating: The elastomer coating on the metal casing enhances the sealing capability of the oil seal. It is designed to be flexible and conform to the shape of the shaft or bore it is sealing. 　　3. Sealing Lip: The sealing lip is the part of the seal that comes into direct contact with the shaft. It is typically made from a material that is resistant to wear and tear and compatible with the lubricant. 　　4. Garter Spring: Some skeleton oil seals feature a garter spring. This spring helps maintain the sealing force of the lip against the shaft, especially during periods of no or low pressure. 　　The unique structural characteristics of skeleton oil seals, including the metal casing, elastomer coating, sealing lip, and optional garter spring, contribute to their effectiveness in preventing lubricant leakage and blocking contaminants. Understanding these characteristics can help in selecting the right oil seal for your needs.

Minimum Order: 100

Product Description Cough Monitor with Particle Size ≤4μm and Battery Capacity of 7 Days Product Description: Our Portable Mesh Nebulizer is a must-have device for those suffering from a chronic cough. Its incredibly compact size and low power consumption of only 1.5W make it easy to carry and use, giving you cough relief wherever you go. With an atomization rate of ≥0.3ml/min, this nebulizer releases fine particles to effectively relieve your cough and asthma symptoms. It also produces minimal noise at a level of ≤40dB, allowing users to have a comfortable and restful experience. And with a particle size of ≤4μm, you can be sure that the nebulizer is effectively delivering the relief you need. Get the Portable Mesh Nebulizer and experience fast and effective relief from coughing and asthma. Cough Monitor with Particle Size ≤4μm and Battery Capacity of 7 Days 0 Cough Monitor with Particle Size ≤4μm and Battery Capacity of 7 Days 1 Features: Product Name: Portable Mesh Nebulizer Power Consumption: 1.5W Weight: Lightweight Material: Medical ABS PC Plastic Power: DC 5V USB Ideal for relieving symptoms of cough with a mesh nebulizer. Compact, lightweight, and medical grade design. Technical Parameters: Product Attribute Specification Capacity 9-18ml Material Medical ABS & PC Plastic Size Portable Power Consumption 1.5W Power DC 5V & USB Particle Size ≤4μm Atomization Rate ≥0.3ml/min Weight Lightweight Noise Level ≤40dB Battery Capacity 7days Applications: The Sunrise B9 Portable Mesh Nebulizer is a medical device designed to help you breathe easier. It is a lightweight and compact nebulizer that fits easily into your pocket or purse, making it ideal for on-the-go use. The nebulizer is powered by a DC 5V USB connection and has a capacity of 9-18ml. It atomizes medication into tiny particles of ≤4μm, quickly and efficiently delivering medication into the lungs. The B9 is certified by ISO13485 and CFDA and is available in minimum order quantities of 10. Its delivery time and price are negotiable. Packaging is provided with 30PCS/Carton and the supply ability is 1000PCS/10days. The Sunrise B9 Portable Mesh Nebulizer is ideal for those who have respiratory conditions, such as asthma or COPD. It is also suitable for anyone who wants to improve their breathing and overall health. With its easy portability and fast atomization of medication, this nebulizer is the perfect medical device for any patient. Customization: Portable Mesh Nebulizer with Fine Particles for Cough Relief Product Overview Sunrise B9 Portable Mesh Nebulizer is a device designed to help with cough relief. It is designed to create a fine mist of particles with the help of atomization. It has a 7-day battery capacity and can be powered through a USB cable or DC 5V. It has a noise level of ≤40dB for quiet operation. Product Attributes Brand Name: Sunrise Model Number: B9 Place of Origin: China Certification: ISO13485, CFDA Minimum Order Quantity: 10 Price: Negotiable Packaging Details: 30PCS/Carton Delivery Time: Negotiable Payment Terms: T/T Supply Ability: 1000PCS/10days Particle Size: ≤4μm Atomization Rate: ≥0.3ml/min Battery Capacity: 7days Power: DC 5V, USB Noise Level: ≤40dB Features & Benefits Provides relief from coughing due to its ability to atomize particles into a fine mist. Long-lasting battery capacity of 7 days. Quiet operation with noise level ≤40dB. Portable and easy to use. Support and Services: Portable Mesh Nebulizer Technical Support and Services Our commitment to customer satisfaction means that we strive to provide comprehensive technical support and services for our Portable Mesh Nebulizer. We provide a variety of resources to answer any questions you may have about the product, including: 24/7 technical support and troubleshooting assistance via phone and email Online knowledge base and FAQs User guides and manuals Video tutorials Live chat support We also offer a comprehensive warranty for our Portable Mesh Nebulizer, which covers manufacturing defects and any unexpected malfunctions. Our warranty also includes a free repair or replacement if necessary. If you have any questions or concerns about the product, please don’t hesitate to contact us. Packing and Shipping: Portable Mesh Nebulizer Packaging and Shipping The Portable Mesh Nebulizer comes with a box for easy storage and transport. The box is made of cardboard and is designed to be lightweight and durable. Inside the box, the Portable Mesh Nebulizer is carefully wrapped in bubble wrap to ensure it is secured from any potential damage during shipping. The Portable Mesh Nebulizer is shipped with a tracking number for easy tracking and delivery, and is usually delivered within 2 to 3 business days. The package includes a user manual with instructions for usage and cleaning.

Christmas antler mickey children hairpin creative flower hair accessories cute hair clip Attaches securely with alligator hair clips Enjoy putting beautiful outfits together with these cute and colorful accessories for your little princess. Cute Hair Accessories for Baby girls, toddlers, little girls.Comfortable for daily wear, can also be worn at sleepovers, parties, and class or school events. Product name Hair Clip Usage Hair Accessary Style Fashional Lovely Occasion Daliy Life Packing opp Bag Size 5.5*5cm Weight 7g Gender Kids Baby Girls Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 0 Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 1 Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 2 Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 3 Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 4 Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 5 Package Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 6 our certificate Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 7 Our production Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 8 about logistics Childrens Christmas Hair Accessories For Hair Pins Clip Antler Mickey Creative Flower Cute 5.5x5cm 9 The goods must be delivered to the designated location intact, to prevent damage to the product during handling and transportation, and to avoid unnecessary trouble for enterprises and consumers.

Electronic IC Chip AD8184 Video Switch IC AD8184ARZ 1 Channel 700MHz 14-SOIC Applications For Video PRODUCT DESCRIPTION Part number AD8184ARZ is manufactured by TI Technologies and distributed by Stjk. As one of the leading distributors of electronic products, we carry many electronic components from the world's top manufacturers. For more information on AD8184ARZ detailed specifications, quotations, lead times, payment terms and more, please do not hesitate to contact us. In order to process your enquiry, please add the quantity AD8184ARZ to your message. Send an email to stjkelec@hotmail.com for a quote now. Product Status Active Applications Video Multiplexer/Demultiplexer Circuit 4:1 Switch Circuit - Number of Channels 1 On-State Resistance (Max) - Voltage - Supply, Single (V+) - Voltage - Supply, Dual (V±) ±4V ~ 6V -3db Bandwidth 700MHz Features Buffered Operating Temperature -40°C ~ 85°C (TA) Mounting Type Surface Mount Package / Case 14-SOIC (0.154", 3.90mm Width) Supplier Device Package 14-SOIC Base Product Number AD8184 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 0 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 1 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 2 AD8184 Video Switch Electronic IC Chip AD8184ARZ 1 Channel 700MHz 14-SOIC 3

Product Description Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg Yaskawa YASKAWA-UP6 is a small industrial robot with a load of 6kg. It was produced and launched by Japan Yaskawa Shougang Robot Company in 2001-2003. It is mainly used in arc welding, packaging and other fields. Yaskawa UP6 has the following characteristics. 1. Takt time shortened Yaskawa UP6's new compact wrist is equipped with a powerful motor, which can move quickly and reliably without getting in the way of the swinging cable, and maintain the speed at all times. 2. Excellent welding quality Arc welding applications have increasing requirements for high quality and consistent quality, which requires improved wire feeding control near the arc to ensure high-volume production. As an arc welding robot, Yaskawa UP6 has a stronger and stronger upper arm with a load of 6kg, which can handle heavier welding torches. The repeating path accuracy can reach 0.06mm, presenting a satisfactory welding effect. 3. High reliability Fast, agile and reliable loading and unloading The Yaskawa UP6 robot can move with large acceleration and speed without damaging other parts, so the compact hollow wrist can move quickly and reliably, while also eliminating the risk of collision in a confined space. Brand Yaskawa Installation method floor, upside down Body weight 130kg Repeatability ±0.06mm Working range 1373mm Model UP6 Payload 6kg Place of Origin Japan Condition Used Yaskawa Robot Application fields welding, cutting, loading and unloading, handling, etc. Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 0 Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 1

Wholesale High Glossy Auto-Repaired TPU PPF Car Paint Protection Wrapping Body Film High Glossy Automotive Paint Protection Film PPF 5 Layers 0 Material: TPU Position: Body Function: Self healing, UV block, Infrared rejection, Anti scratch, Sand proof Structure: 5 layers Application: TPU PPF car paint protective film Standard Size: 1.52x15m Pet film: 75um ksm Release film: 75μm Thickness: 7.5mil Adhesive: Removable glue OEM/ODM: Available Warranty: 5-10 years High Glossy Automotive Paint Protection Film PPF 5 Layers 1 High Glossy Automotive Paint Protection Film PPF 5 Layers 2

Introduction ER-TS-22800 protocol is a wireless tilt sensor with ultra-low power consumption, small size and high accuracy, for users without power supply conditions or real-time dynamic measurement of object attitude Angle industry applications. Powered by lithium battery, based on the Internet of Things technology Bluetooth, Zigbee (optional) wireless transmission technology, the use of industrial-grade MCU, triple-proof PCB boards, imported cables, wide- temperature metal shell and other measures to improve the product’s industrial level, good long-term stability and zero drift small, Low power sleep mode can be automatically entered, thus getting rid of the dependence on the use environment. Compact product structure, precision design, for temperature and linearity compensation again, Integrated with short circuit, instant high pressure, polarity, surge and other comprehensive protection functions, simple and easy to use, and wireless digital signal transmission mode eliminates the tedious wiring brought by long cable transmission, noise interference; Industrial-grade design has extremely high measurement accuracy and anti-interference ability, wireless sensor nodes can form huge wireless networks, supporting thousands of monitoring points for simultaneous inclination monitoring, supporting the professional computer software, no need for field survey, real-time data measurement and record the state of the measured object; Suitable for the industrial site, old dilapidated houses, ancient buildings, civil engineering, various tower tilt deformation remote real-time monitoring and analysis of the needs of the safety monitoring system. Product property Biaxial monitoring (uniaxial optional) Measurement Range: ± 30° Accuracy: 0.005°, resolution: 0.0008° Volume (94*74*64mm) (customizable) Ultra-low power consumption Built-in rechargeable lithium battery power supply Wide temperature work:-40~+ 85℃ IP67, protection level Product application Billboard monitoring Bridge construction Cloud platform levelling Ship attitude measurement High Speed Rail Roadbed Tunnel Monitoring Satellite solar antenna positioning Medical equipment Various engineering machinery angle control