Offers to Sell

It's extracted from the seed of pomegranate by pomegranate co2 extract. Pomegranate essential oil is the only source of plants polyunsaturated conjugated fatty acid, and its main component is pomegranate acid, the content of which can reach 60-80%. This Punicic acid is Omega -3 polyunsaturated fatty acids, the content is more than 75%, it is the best nutrition oil for people who is short of Omega -3 series unsaturated fatty acids. Pomegranate Essential Oil Specifications Raw material: Pomegranate seed (Latin name: Punica granatum L.) CAS No.: 84961-57-9 Main active ingredient: Pomegranate acid ≥75% Appearance: Yellow transparent oil Flavor: Pomegranate seed characteristic odor, mild Lead: 0.0-10.0mg/kg Iron: 0.0-10.0mg/kg Mercury: 0.0-0.5mg/kg Aerobic plate count: 0-5000 cfu/g Coliform bacteria: 0-10 cfu/g Mold count: 0-100 cfu/g Yeast count: 0-100 cfu/g Pomegranate Seed Oil Benefits Bulk natural oils protect the body's immune system. Prevents atherosclerotic cardiovascular disease. Anti cancer and anti mutation. Natural botanical extracts has a therapeutic effect on Obesity, diabetes and heart disease. Antioxidant, senescence inhibition and skin whitening. Pomegranate Seed Oil Uses Pharmaceutical, health care food (Weight loss, protect cardiovascular system) Cosmetics, daily chemical Recommended Usage of Pomegranate Seed Oil Add appropriate amount according to product characteristics and appropriate method. This product is easy to oxidize and should be sealed and stored in a cool and dark place. There are many pomegranate seed oil manufacturers , but we are one of the best choices for you. Contact us to buy pomegranate seed oil. Kaiping Healthwise Health Food Co Ltd is one of the famous leading natural oil manufacturers, we provide Botanical Extract, natural oil, etc. Want to know more? Contact us.

Minimum Order: 25

Air Separation Unit refers to equipment which obtain oxygen, nitrogen and argon from liquid air at low temperature by difference of each component boiling point. Application Fields Oxygen, nitrogen, argon and other rare gas produced by air separation unit are widely used in steel, chemical industry,refinery,glass, rubber, electronics, healthcare, food, metals, power generation and other industries. Product Specification 1.Air Separation Unit with normal temperature molecular sieves purification, booster-turbo expander, low-pressure rectification column, and argon extraction system according to client’s requirement. 2.According to the product requirement, external compression,internal compression (air boost,nitrogen boost),self- pressurization and other processes can be offered. 3.Blocking structure design of ASU, quick installation on site. 4.Extra low pressure process of ASU which reduce air compressor exhaust pressure and operation cost. 5.Advanced argon extraction process and higher argon extraction rate.

The fish feed pelleting machine is feed processing equipment that uses corn, soybeans, and other grains as raw materials to produce floating fish feed pellets. The fish feed processed by our floating fish feed pelleting machine has the advantages of high hardness, smooth surface, complete internal ripening, good palatability, etc. It can effectively improve the digestion and absorption of nutrients in the feed pellet. Users can also choose different discharge apertures according to the needs of their own fish groups to obtain the best economic benefits. Get Price Now! WhatsApp Me Now! Over the years, our products have been exported all over the world and have been well received by our customers, especially those in Africa and Asia. After continuous communication with our customers, our R&D team has developed a new generation of fish food pelleting machines. This series of fish food pelleting equipment adopts a new structural design, which has the advantages of refined structure, wide adaptability, and low noise, which can meet the needs of different customers.

Minimum Order: 1 bags

JL Series Portable Oil Purifier is equipped with three-stage filtration system, simple structure and easy operation, requires no filter paper and causes no contamination. The filtration system is with gradual increasing precision, so JL oil purifier can effectively remove mechanical impurities from various industrial oil, improve oil quality. Besides JL oil purifier can be used as oil filling or oil pumping equipment, it is widely used for various industries such as power, petrochemical, metallurgy, mechanics, railway, etc. 1. Two types optional As you can see from the photos, we can supply you two types of JL oil purifier, you can choose either type 1 or type 2, the price is same. 2. With electric control cabinet Our JL oil purifier is equipped with electric control cabinet, safe and easy for operation, many suppliers don't have. 3. Better oil pump We use Low Noise Gear Pump, which is imitated product of famous Germany brand KRACHT, with internal safety valve. 4. Larger filters and Higher precision For our JL-50, the size of filter element is 150MM (Diameter) × 480MM (Height), larger filters can hold more impurities and have longer service life. 5. Custom electric motor The voltage of electric motor can be customized as per your requirement.

Minimum Order: 1 bags

CAT7 FTP PATCH CORD CABLE 26AWG*4 OD 6.5mm MOQ 5000 Meters Raw Cable Packed By Roll CAT7 FTP PATCH CORD CABLE 26AWG*4 OD 6.5mm MOQ 5000 Meters Raw Cable Packed By Roll Wire Color: 4P: Green&White+Green,Blue&White+Blue, Orange&White , +Orange,Brown&White+Brown

KTJ-2 Hand-held Pneumatic Tire Spreader features: Hand-held type Easy operation Pneumatic type KTJ-2 Hand-held Pneumatic Tire Spreader technical specification: Max enlargment: 260mm Pressure: 0.6-0.8Mpa G.W/N.W: 4/3.5kgs Packing size: 435*250*75mm

IEC 61089 Xlpe Aluminum Cable Pvc Insulated Aluminium Conductor Cable Product Name Aluminum conductor XLPE PVC insulated cable underground cable Conductor Aluminum Construction Aluminum Stranded & Aluminum Alloy Reinforce Colors Assorted upon request Voltage 600-1000V, 1KV-35KV Application Used as bare overhead conductor for power distribution lines Standards GB/T 1179, IEC 60889, IEC 61089,BS,DIN and ICEA upon request

Origin: Ningbo Model: φ2~φ200 Whether standard parts: Standard Parts product name: Knife seat oil seal Material: Fluorine rubber + cold rolled plate + stainless steel spring Nature: Wear-resistant and high-temperature resistant shape: TC Scope of application: Juicer, soy milk machine, grinder, coffee machine, etc. use: Dust seal, fixed seal, shaft seal

Minimum Order: 1000

The scope of application: Applied to illumination of water dripping, water spattering, water coagulating place in ships, such as oven cabin, dry cabin, tunnel, pipeline, weather deck and etc. Products characteristic: 1. The shell adopts good quality stretch-formed steel plate, lampshade is injection molded by PC, and has the seal structure. 2. In order to prevent from electric shocking, equipped with a copper earthing rod with the mark in the lights. 3. Plug-in type lamp holder, equipped wiring terminal inside, convenient to connect. 4. The lamp equipped B15d lamp holder, used for 24V/15W emergency bulb, there is mark on th edge of lampshade, remark clear that need the emergency device when order. 5. Equipped with compensating capacitance inside, start rapidly.

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability, noise reduction, wear resistance, quietness, lubrication and antistatic. Processing Detail of PA66 GF20 (A2000D) Other Details of  PA66 GF20 (A2000D) Physical Property Ash (20.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1285Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.9 % 1 ISO294-4) Shrinkage Vertical Flow (0.8-1.1% I ISO294-4) Mechanical Properties Tensile strength (145.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 5mm/min Notched Impact Strength (8.5KJ/m2 I ISO179) Conditioned 1.0J Flexural Strength (235MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (6876 MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (245*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyethylene or buy pa6 6 gf50, contact us.

Minimum Order: 1000

PA66 GF 15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property enhancements such as high tensile strength, heat stabilized and flame retardant make it suitable for injection molding.  Other percentages glass-filled nylon is also available on a custom-order basis. Typical Application of pa66gf15 (A2000C) Nylon 66 GF15, mainly used in internal and external structural parts around the engine, electrical switches, and electronic connectors. Processing Detail of PA66 GF15 (A2000C) Other Details of pa6 6gf15 (A2000C) Physical Property Ash (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1245Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.7-1.0% 1 ISO294-4) Shrinkage Vertical Flow (1.0-1.4% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.0% I ISO527) Conditioned 5mm/min Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned 1.0J Flexural Strength (188MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5350MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (240*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyolefin or more, contact us.

Minimum Order: 1000

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this PA6 plastic material has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry.  Typical Application of PA6 GF45 (A1011I) PA6 GF45 is used in turbines, propellers, screws, nuts, washers and other components with high rigidity and dimensional stability and heat-resistant aging, as well as fishing tackle reels, racket frames and other components with high mechanical strength, good toughness, higher tensile and compressive strength. Other Details of PA6 GF45 (A1011I) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ As one of engineering plastic manufacturers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1000

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables, household appliances, automobiles accessories, etc. The carrier of the special color masterbatch is the same as the plastic of the product, and it has good matching. After heating and melting, the pigment particles can be dispersed in the product plastic well, and it has good chemical stability. From a functional point of view, the products of color masterbatch material include antistatic masterbatch, antioxidant masterbatch, light stable masterbatch, lubricating masterbatch, open masterbatch, flame retardant masterbatch, matte masterbatch, pearlescent masterbatch, filler masterbatch, conductive masterbatch and antibacterial and anti-mildew masterbatch. Some masterbatches are comparable to European and American materials like DATE company with stable product quality and high-cost performance. As a reliable masterbatch supplier/masterbatch exporter, Anmei produces the low-shrinkage PBT masterbatch for optical fiber and cable, which is one of our special masterbatch products. Types of Masterbatch Material in Anmei We offer a wide range of white masterbatches based on carriers such as TPU, PE, PS, ABS, and more. An antimicrobial masterbatch is supplied in carriers suitable for most polymers including PVC, pe masterbatch, HDPE, pp masterbatch, PA, PET, abs masterbatch and PC. What is Antimicrobial Masterbatch? It can be used in most general plastics such as ABS, PP, PE, PC, as well as injection molding, extrusion, blow molding and other conventional plastics. For products that have high requirements for pro... The Advantage of PBT Additive Masterbatch in Anmei Low-shrinkage PBT masterbatch is one of Anmei's best-selling products mainly used for 5G fiber jackets. Anmei PBT can bring: Your satisfaction is important to us! Email us your questions about engineering plastic and masterbatch products and more. As a plastic engineering inc, Anmei provides pa6 plastic material, modified polyolefin, master batches, polypropylene masterbatch, slip masterbatch, masterbatch compound, abs and pc material and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material are LG Chemical, Toray and Denka. Transparent ABS Typical Application Many chemicals will corrode the rubber phase in the ABS resin, causing the transparent ABS to fog. MABS plastic material is widely used in household appliances and kitchenware, consumer goods, automotive and packaging industries. At present, transparent ABS resin is mainly used in small appliances such as TVs and air conditioners, refrigerators, washing machines, floor scrubbers, window cleaners, etc., and parts of transparent windows, double-shot molding TV front frames, and air-conditioning panels sprayed on the back are also made by transparent ABS (MABS plastic). Transparent ABS Processing Detail Here are the processing details of transparent ABS（MABS plastic material）, a kind of ABS engineering plastic. Other Details of Transparent ABS (MABS plastic) Physical Property of Transparent ABS  (MABS plastic) Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties of Transparent ABS  (MABS plastic) Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property of Transparent ABS  (MABS plastic) Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions of Transparent ABS  (MABS plastic) Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As a masterbatch factory, Anmei provides pa6 plastic material, modified polyolefin, master batches, pa6 gf 15 and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags