Offers to Sell

Desulfurization Pump Desulfurization pump is a kind of pump that can adapt to various working conditions, such as conveying acid, alkaline clear liquid or slurry; All kinds of corrosive pulp in smelting industry; All kinds of dilute acid in sulfuric acid industry; All kinds of sewage in environmental protection industry. The pump is not only corrosion-resistant and wear-resistant, the use of a very wide range.It has the following characteristics: 1、Desulfurization pump has strong wear resistance: all flow passage parts are made of steel lined ultra high molecular weight polyethylene (UHMW-PE). The wear resistance of UHMW-PE ranks first among plastics, which is 4 times higher than nylon 66 (PA66) and polytetrafluoroethylene (PTFE), and 7-10 times higher than carbon steel and stainless steel. 2、Desulfurization pump has strong impact resistance: the impact strength of UHMWPE ranks first among general engineering plastics, which is 5 times of that of (acrylonitrile / butadiene / styrene) copolymer (ABS), and can maintain stability at minus 196 ℃, which is a characteristic that no other plastics have. 3、Excellent corrosion resistance of desulfurization pump: the pump can resist all kinds of corrosive media (acid, alkali, salt) and organic solvents within a certain temperature and concentration range, and can be immersed in 80 kinds of organic solvents at 20 ℃ and 90 ℃ for 30 days. There is no abnormal appearance, and other physical properties are almost unchanged 4、No noise in desulfurization pump: the impact energy absorption of UHMWPE is the highest value in plastic, and the sound attenuation is good, so that the noise generated by liquid flow is minimized in the process of transportation. 5、Desulfurization pump Safe and reliable, no toxin decomposition: the pump used ultra high molecular weight polyethylene (UHMW-PE) chemical properties are extremely stable, so it is also suitable for use in the food industry. 6、Low friction coefficient of desulfurization pump: the internal friction system of the pump is only 0.07-0.11, so it has self lubrication. Under the condition of water lubrication, the dynamic friction coefficient is half lower than that of PA66 and POM. When working in the form of sliding or rotating, the lubricity is better than that of steel and brass with lubricating oil. 7、Good viscosity resistance of desulfurization pump: ultra high molecular weight polyethylene (UHMW-PE) has excellent viscosity resistance, and its adhesion resistance is equivalent to that of PTFE, so it is also outstanding in conveying some media with high viscosity. 8、Desulfurization pump can transport strong acid and other liquids, suitable for medium: sulfuric acid with concentration less than 80%, nitric acid with concentration less than 50%, hydrochloric acid with various concentrations, liquid alkali, both clear liquid and slurry.

Gravel Pump Gravel pump is mainly used for continuous transportation of strong abrasive materials which can not be transported by general slurry pump due to too large particles. It is suitable for dredging, sand absorption, river dredging, mining and metal smelting slag transportation. Structural features of gravel pump 1、This series of gravel pumps are mainly horizontal centrifugal pumps with single casing structure. Special clamp is used to clamp the pump body and cover. The outlet direction of the pump can be at any position of 360 degrees, so it is easy to install and use. 2、The bearing assembly of gravel pump adopts cylindrical structure, which is easy to adjust the clearance between impeller and pump body, and can be removed as a whole during maintenance. The bearings are lubricated with grease. 3、The shaft seal of sand gravel pump includes packing seal, impeller seal and mechanical seal. 4、The gravel pump has wide flow channel, good cavitation performance, high efficiency and wear resistance. 5、The main driving modes of gravel pump are V-belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, variable frequency drive, silicon controlled speed regulation, etc. 6、The flow passage parts of gravel pump are made of wear-resistant alloy cast iron with high hardness. 7、Gravel pump uses a variety of speed and a variety of variants, so that the pump runs in the best condition. It has long service life, high operation efficiency and can meet many kinds of harsh transportation conditions.

Slurry Pump Slurry pump can also be called metal pump, wear-resistant pump, industrial pump, accident slurry pump, ash filling pump and filter pump.The name of slurry pump is different. We can know that slurry pump is widely used in industry, mining and other large industries. Slurry pump can be widely used in mining, power, metallurgy, coal, environmental protection and other industries to transport slurry containing abrasive solid particles. For example, transportation of mineral slurry in metallurgical concentrator, hydraulic ash removal in thermal power plant, transportation of coal slurry and dense medium in coal preparation plant, dredging of river channel, river dredging, etc. In the chemical industry, it can also transport some corrosive slurry containing crystal.   First of all, about 80% of the applications in mineral processing plants are used in mineral processing plants in the mining industry. Due to the poor working condition of ore primary separation, the service life of slurry pump in this section is generally low. Of course, different ores have different abrasivity. If the relative abrasiveness of the concentrate conveying section is reduced, the overall service life of the pump will be longer. Therefore, when the general users often ask about the service life of the products of the suppliers in the procurement process, strictly speaking, any manufacturer will not promise an accurate service life cycle for the users without any basis, because the service life of the flow passage parts (wear-resistant and corrosion-resistant parts) depends on many different factors, The diversity and complexity of working conditions lead to different service life of materials with the same quality.   In thermal power plants, due to the use of a large number of coal-fired power generation, the slag or ash after coal combustion needs to be removed. The slurry pump is used to remove the ash. After mixing a certain amount of water, the slag is transported to the place where the ash is stacked by the slurry pump. Therefore, sometimes the slurry pump also becomes the ash pump in the power plant.   In the coal washing industry, due to different working conditions, large coal lump and coal gangue are easy to block, so the design requirements for slurry pump are very high   In the field of sea water sand selection, slurry pump application has gradually been recognized by customers. But in the sea water, sand in the river, slurry pump is more easily called sand pump, dredge pump. Although the method is different, it can be called slurry pump generally from the aspect of structure characteristics and pump performance principle. Therefore, in this sea water sand selection, we often call sand pump, in the river dredging is used to be called dredge pump. Although the application of slurry pump is wide, it is very important to apply it correctly. Because of the limitation of its name, some people who are not in this industry misunderstand it. In fact, mud pump, impurity pump, dredge pump, silt pump, etc. are all used in the application scope of slurry pump. In the application of slurry pump, it is very important to pay attention to the reasonable design, correct calculation and proper selection.

Tai Hing PET bristle filament fiber is the strongest toughness. It’s able to bear creep, resisting tiredness and friction. Its resisting chemical medicines ability and heat-resisting is good. It can be used in the temperature to reach 120℃ for a long time, keeping good physical mechanical performance within the range of wider temperature. PET bristle filament fiber is used in daily Household cleaning, make-up brushes, and paint brushes.

Minimum Order: 250

Tai Hing PET bristle filament fiber is the strongest toughness. It’s able to bear creep, resisting tiredness and friction. Its resisting chemical medicines ability and heat-resisting is good. It can be used in the temperature to reach 120℃ for a long time, keeping good physical mechanical performance within the range of wider temperature. PET bristle filament fiber is used in daily Household cleaning, make-up brushes, and paint brushes.

Minimum Order: 250

Tai Hing PA (Nylon) 66 filament bristle is the heat-resistant, good low temperature performance filament fiber. And it's also able to bear chemicals and oil. Usually it’s used for Hairbrush of famous brand Manufacturers, toothbrush and cleaning brush industrial use, etc.

Minimum Order: 250

HongKong Tai Hing PBT filament fiber has excellent toughness and fatigue resistance, high impact strength, heat and weather resistance, electrical properties and arc resistance. It is suitable for cleaning brushes, oral care brush, make-up brush, industrial brush, painting brush, outdoor cleaning brush, in the wet working environment due to low moisture absorption rate as well as suitable for making strings in music instrument because of its good tensile strengths and toughness.

Minimum Order: 250

Product parameter Series: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225; Capacity: 0.2p-100uF 10V-5000V 0.2Pf--10Uf full range; Deviation: B=±0.1pF, C=±0.25pF, D=±0.5pF, F=±1%, G=±2%, J=±5%, K=±10%, M=±20%, Z=-20%+80%. Features ★ The product has high dimensional accuracy, which is convenient for high- efficiency assembly of the automatic placement machine; ★ The terminal electrode is a three-layer electrode, suitable for wave soldering and reflow soldering; ★ The dielectric body and the surface are made of the same material, with little influence from environmental conditions, high insulation resistance, and high reliability; ★ Containing various temperature characteristic media from COG to Y5V, suitable for common electronic equipment such as communications, computers, household appliances and instruments. Product advantages 1. Small size, easy for SMT processing, good solderability, compared with other traditional plug-in capacitors, it greatly solves the problem of small space on the circuit board. It is a representative product of high-tech products. 2. Long life span, the product life span is ten years. 3. Good stability, which is reflected in a stable requirement for the capacitance and withstand voltage of the smd capacitor. 4. Green environmental protection requirements, because the smd capacitor are made of ceramics as raw materials, they have achieved environmental protection and energy saving. 5. Good heat insulation performance. Because it is made of ceramics as raw materials, it is a natural good material for heat insulation. The above advantages are not available in traditional plug-in resistors. SMD ceramic capacitor ▲ Physical anatomy Applicable industry Suitable for LED lighting related products,power products,household appliances,computer side office products, large industrial equipment controllers, network equipment, communication products, digital products, automotive electronics, security monitoring systems and other fields.

Minimum Order: 20000

Product parameter Series: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225; Capacity: 0.2p-100uF 10V-5000V 0.2Pf--10Uf full range; Deviation: B=±0.1pF, C=±0.25pF, D=±0.5pF, F=±1%, G=±2%, J=±5%, K=±10%, M=±20%, Z=-20%+80%. Features ★ The product has high dimensional accuracy, which is convenient for high- efficiency assembly of the automatic placement machine; ★ The terminal electrode is a three-layer electrode, suitable for wave soldering and reflow soldering; ★ The dielectric body and the surface are made of the same material, with little influence from environmental conditions, high insulation resistance, and high reliability; ★ Containing various temperature characteristic media from COG to Y5V, suitable for common electronic equipment such as communications, computers, household appliances and instruments. Product advantages 1. Small size, easy for SMT processing, good solderability, compared with other traditional plug-in capacitors, it greatly solves the problem of small space on the circuit board. It is a representative product of high-tech products. 2. Long life span, the product life span is ten years. 3. Good stability, which is reflected in a stable requirement for the capacitance and withstand voltage of the smd capacitor. 4. Green environmental protection requirements, because the smd capacitor are made of ceramics as raw materials, they have achieved environmental protection and energy saving. 5. Good heat insulation performance. Because it is made of ceramics as raw materials, it is a natural good material for heat insulation. The above advantages are not available in traditional plug-in resistors. SMD ceramic capacitor ▲ Physical anatomy Applicable industry Suitable for LED lighting related products,power products,household appliances,computer side office products, large industrial equipment controllers, network equipment, communication products, digital products, automotive electronics, security monitoring systems and other fields.

Minimum Order: 20000

Diode details Pingshang provides services for you M7 large chip patch rectifier diode Product parameter Model: IN4001—IN4007 SS12 SS14 SS16 SS24 SS26 SS34 SS36 SS54 SS110 SS210 SS310 SS320 SS510 etc. Package: SMA (DO-214AC), SMB (DO-214AA), SMC (DO-214AB) Voltage: 400V, 600V, 1000V, 800V Features ★ Fast switching, low leakage; ★ High current capability and low forward voltage drop; ★ High surge capacity, surge overload rating to 30A peak value; ★ Low reverse leakage current, high reliability; ★ Comply with ROHS directive requirements. Diode anatomy ▲ Physical anatomy diagram Applicable industry Suitable for LED lighting related products, power products, household appliances, computer side office products, large industrial equipment controllers, network equipment, communication products, digital products, automotive electronics, security monitoring systems and other fields.

Minimum Order: 20000

PRODUCT DESCRIPTION Flocking TableCloth Pvc Printed Flower Fruit Vinyl Tablecloth Table Cover Plastic Pvc Table Cloth Oilcloth Polyester Yarn Fabric Backing Tablecloth Flower Design,Waterproof,Oilproof,Stain- resistant Plastic-Tablecloth. Embossing PVC Table Cloth Roll Factory.Wipe-Clean Tablecloth that Protects Your Wood Table.137cm Width and 20 Meters Length one Roll,each roll package by plastic film with Customized Label. Flocking Table Cloth Yarn Fabric Backing Product Description High Quality PVC Emboss Printed Tablecloth In Wholesale Factory Material 100% PVC/100% Polyester Thickness 0.22mm-0.45mm PVC,30g/m2 polyster Backside Yarn fabric backing Package One Roll in Clear PVC Bag,Two Customized Label at both end of the roll,Hard paper tube core,Rubber plug to enclose each end of the roll. Size 137cm*20m/Roll or 137cm*30m/Roll(Can be Customized) Weight 300g/m2-330g/m2 Width 1.37m MOQ 2000 Meters/Design OEM Yes New Design No 20" Container 20 meter/ Roll 2000Rolls around Oilcloth Vinyl Flocking Tablecloth 0.22mm Thick 20m ROll Anti Static 0 Oilcloth Vinyl Flocking Tablecloth 0.22mm Thick 20m ROll Anti Static 1 Oilcloth Vinyl Flocking Tablecloth 0.22mm Thick 20m ROll Anti Static 2

LS-A4-5L full automatic oil plastic bottles machine factory can produce different shapes from 2L to 7L water bottles,edible oil bottles and other plastic PET containers. High speed,low defect rate,stable running and easy operation. Machine Parts a.PLC controller touch screen : Mitsubishi （Japan） b.Pneumatic parts:AIRTAC(TAIWAN) c.Controller of stretch ,shift ,clamping servo motor : Mitsubishi（Japan） d.Other parts are world-famous brands https://www.bottleblowingmachinery.c , om/product/full-automatic-pet-stretch-blow-mouldin , g-machine/lsa45l-special-for-2l-to-7l-pet-bottles. , html

LS-A1-5L full automatic pet bottle making machine can produce different shapes from 1L to 7L water bottles,edible oil bottles and other plastic PET containers. High speed,low defect rate,stable running and easy operation. Machine Parts a.PLC controller touch screen : Mitsubishi （Japan） b.Pneumatic parts:AIRTAC(TAIWAN) c.Controller of stretch ,shift ,clamping servo motor : Mitsubishi（Japan） d.Other parts are world-famous brands https://www.bottleblowingmachinery.c , om/product/full-automatic-pet-stretch-blow-mouldin , g-machine/lsa15l-special-for-1l-to-7l-pet-bottles. , html

https://www.chinaaerator.net/product/multi-impelle , r-paddle-wheel-aerator- drove-by-diesel.html Diesel engine driven multi-impeller waterwheel aerator is developed by Jinhulong Company for aquaculture in power-deficient areas.Impeller aerator. The machine uses a small diesel engine as the power source, and shifts through the gearbox to drive 10~16 sets of waterwheels.Splashing water, driving water to flow, dissolving oxygen, decomposing harmful substances, improving pond water quality, is aquaculture A good helper for the family. The main power part of the diesel engine driven multi-impeller waterwheel aerator is placed on the pond base and powered by the universal joint. It is transmitted to the rotating shaft to drive the impeller. The working speed of the impeller is better at 100~130 rpm.

Minimum Order: 100