Offers to Sell

　　Due to the unique nature of the work environment, oil seals have higher requirements in terms of sealing performance, temperature resistance, wear resistance, and pressure resistance to ensure their adaptability to different work environments. Therefore, oil seal products should have higher requirements in terms of appearance and materials to ensure their quality. A good oil seal product is not only reflected in its performance, but also in its packaging, quality inspection, and after-sales service. Therefore, to make a good oil seal, these points must be addressed. 　　To address these issues, the NQKSF factory does the following: 　　Independent production of oil seal metal shells: To ensure strong compressive ability, the metal framework must be thick enough to support the entire oil seal and ensure its service life. The company produces its own oil seal metal shells. Our shells are treated rigorously to prevent rust and increase adhesion. They are soaked multiple times in a prepared solution and dried at a reasonable temperature. 　　Use of high-quality materials: To improve wear resistance and temperature resistance, rubber is essential. We have always been committed to using high- quality raw materials, all of which are imported. Common materials used include NBR, FKM, hydrogenated NBRrubber, and silicone rubber. 　　Better machinery and vulcanization: The next step is vulcanization molding. Our NQKSF factory has a very mature vulcanization process. Our products have a longer vulcanization time and higher performance. Furthermore, our machines are regularly replaced, and we always strive for good quality. 　　High-precision quality inspection: We refurbish the products produced, add springs to ensure sealing performance, and conduct sampling and mixed inspections. NQKSF Sealing Component Factory products adopt the ISO9001 and TS16949 quality assurance systems. Through strict quality control, we continuously improve our product technology, research and development, and service quality. The strict treatment of material characteristics and the stringent requirements for mold accuracy ensure the product's qualification rate, enhancing its core competitiveness. 　　Better packaging and service: We carefully package our products to deliver them to our customers faster and better. After-sales service is also essential. A trustworthy brand is also a bonus for good oil seal products. NQKSF oil seals have always pursued products that customers can trust. 　　By addressing these points, not only will the brand's reputation continue to grow, but customers will also increasingly trust our products. A complete after-sales service is also necessary. Products that have earned the trust of customers are what NQKSF oil seals have always pursued.

Minimum Order: 10 long tons

EIS-037T-0013/EIS-055T-0016 Integrated Hydraulic Servo System for Injection Molding Machine 1. Name:Integrated Hydraulic Servo System for Injection Molding Machine 2. Introduce:Integrated Hydraulic Servo System,th pressure and flow controlled double closed-loop,by control the motor speed to control the oil supply of hyrauluc power unit. 3. Model:EIS-037T-0013/EIS-055T-0016 4. Application:Can be used on Injection molding machine,Lathe,CNC,Hydraulic Press,Vulcanizing Machine,Shoe Machine,Bending Machine,Pipe Bender,wood-working machine and so on. 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 0 4.Feature: (1)Compare with the tranditional Injection Molding Machine hydraulic power unit the noise and temperature is lower. (2)Power Saving:Compare with the tranditional Injection Molding Machine hydraulic power unit can save 70% power. (3)Easy assemble and operate convenience.Before delivery out the engineer will set all the parameters according to customer's equipment.After get the system customer only need to connect the power cable.If customer want to adjust some parameters only need to re-set on the keyboard(include keyboard type and terminal type) or PLC of system accroding to the manual document. (4)High Efficiency. 5.Parameter of Motor: EIS Model EIS037T-0013 EIS055T-0016 EIS075 , T-0020 EIS090T-0025 EIS110T-0032 , EIS150T-0040 EIS185T-0050 EIS220 , T-0063 Basic Data Carrier Frequency 2kHz~16kHz；Can adjust the Carrier Frequency according to overload Control Way close-loop vector control Speed Ratio 1 :1000 Rotating Speed ±0.02% Overload Capacity 150% rated current 60S,180% rated current 3S Starting Torque 0Hz/180% Power Voltage Frequency 3 Phase,50/60Hz Voltage Range 380V Rated Power 3.7kW 5.5kW 7.5kW 9.0kW 11kW 15kW 18.5kW 22kW Rated Output current 9A 13A 17A 20A 25A 32A 37A 45A Rated Input current 10A 14A 18A 21A 26A 35A 38A 46A Control Terminal Input Terminal LP12-8/7 Air Plug,can customized Output Terminal LP12-8/7 Air Plug,can customized Communication Terminal Integrated LP12-7 Air Plug,include 485 Power Out put 10V/13V/24V Power Output Keyboard LED Display Parameter Key 8 Keys Environment altitude 0~2000m,Over 1000m derating,increase 100m derate 1% Application Place indoor,avoid direct sunlight,non-corrosive,flammable gas,Wihout oil mist,water vapor and so on Environment Temperature -10℃~40℃,40~50℃ derating,increase 1℃ derate 1.5% Vibration Lower 0.6g Store Temp -20℃~60℃ Humidity Under 90%RH (non condensing) Cooling Way forced cooling 6.Parameter of Servo Pump(Internal gear pump): Serial No. Size mL/r Working Pressure(Mpa) Speed Range(r/min) Weight(KG) Rated Max Max Min HG0 8 8.2 31.5 35 3000 600 4.6 10 10.2 31.5 35 3000 600 4.8 13 13.3 31.5 35 3000 600 4.9 16 16.0 31.5 35 3000 600 5.2 20 20.0 25 30 3000 600 5 . 6 25 24.0 25 30 3000 600 6 HGl 25 25.3 31.5 35 3000 200 14.5 32 32.7 31.5 35 3000 200 15 40 40.1 31.5 35 3000 200 16 50 50.7 31.5 35 3000 200 17 63 63.7 25 30 3000 200 18.5 HG2 63 64.7 31.5 35 3000 200 42 80 81.4 31.5 35 3000 200 43.5 100 100.2 31.5 35 3000 200 45.5 125 125.3 31-5 35 3000 200 48 145 145.2 25 28 3000 200 50 160 162.8 21 26 3000 200 52 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 1 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 2 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 3 7.Case for Power Saving(All-Electric Injection Molding Machine--Neutron Hydraulic Power Unit): Name 200 Tons All-Electric Injection Molding Machine Hydraulic Power Unit Model HIS-037 Pressure 14MPa Oil Tank 20L 3.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 43.7kW 5.5kW Integrated Hydraulic Servo System For Injection Molding Machine EIS-037T-0013 EIS-055T-0016 5 Tranditional Hydraulic Power Unit Hydraulic Servo System Test Time(Hour) 24 24 One Day Power Consumption(kW.h) 40 2.4 One Hour Power Consumption(kW.h) 1.67 0.1 One Year Power Consumption(kW.h) 14629 876 One Day Electric Charge(RMB) 14629 876 Energy Saving 94 Oil Temperature(℃) 55 30 The tranditional single pump system injection molding machine,single pump system can only control one action of the pressure and flow,die sinking and push out can not Synchronize,so the production efficiency is very low. Only need to add a compact structure &cost-effective Hydraulic Servo System: (1)Improving production efficiency 3S. (2)Low thimble pressure . (3)Not need to change the oil-way and Electrical Cabinet,save time to produce.

EC 380V/220V High power variable speed 500W-2200W BLDC motor for farm duty fan Introduction This page shows a high power EC/BLDC fan motor used in fan blower or air conditioner units and similar applications, which need to drive fan blowers. Till now, Hengsheng has a various of specifications of AC BLDC motors, and different induction motor, geared motor, PM motor with gearbox. Because of its long working life, stable performance and low failure rate, our products are well received by customers. We have got the certification of CCC, RoHS and ISO9001:2008. Features of BLDC motor 1. Rated Voltage:200-240V 50Hz/60Hz 2. Output power range: 750W-2.2KW 3. Speed 300-1000 adjustable 4. The driver adopts the structure of aluminum shell completely closed, which has high protection level and is safe and reliable. 5. The driver adopts independent installation structure, which is convenient for disassembly and maintenance after sale. 6. The driver is integrated with three-speed, VSP10V,AC24V,PWM/PWF, RS485 control mode, and the function of speed feedback is optional. 7.Using infrared remote control, adjustable constant speed,constant torque, fan coil unit load, cassette fan coil unit load.clockwise or counterclockwise rotation 8.Using the same structure and installation method as the single-phase electric power, it is more convenient to replace and popularize 9.Rated speed 1070 RPM, rated output power 750W, Max Torque 6.5 Nm. Specification 140&160mm motor specification PN A B C D E F G H K Specification Rotation 12411001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-220V-1.2KW-450rpm CCW 12511001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.2KW-600rpm CCW 16911006 6 φ24 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.5KW-940rpm CCW 13411003 8 φ24 M12*P1.75 35 35 49 84.7 102 325 160-220V-1.5KW-940rpm CCW 16311001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-1.8KW-950rpm CCW 14711001 6 φ25.4 M12*P1.75 35 35 49 84.7 102 325 160-380V-2KW-1400rpm CCW 16411001 8 φ24 M16*P1.5 26 40 70 93 110 333 160-380V-2.2KW-950rpm CCW 12411003 8 φ24 M20*P1.5 30 45 78 95 112 335 160-220V-1.1KW-600rpm CW 12411005 8 φ24 M20*P1.6 30 45 78 95 112 335 160-110V-1.1KW-600rpm CW 12811003 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-220V-0.375KW-730rpn CCW 13011001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-380V-0.375KW-500rpn CCW 12811001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-220V-0.55KW-560rpm CCW 12911001 6 φ25.4 M12*P1.75 35 35 49 51 72 289 140-380V-0.55KW-890rpm CCW 12911003 8 φ24 M12*P1.75 35 35 49 51 72 289 140-380V-0.55KW-940pm CCW 12811006 8 φ24 M12*P1.75 35 35 49 51 72 289 140-220V-0.75KW-940rpm CCW 16911003 14 φ15 M10*P1.5 21 30 53 71 88 304 140-380V-1.1KW-940pm CCW 16311001 14 φ15 M10*P1.5 21 30 53 71 88 304 140-380V-0.75KW-940pm CW 500-2200W AC BLDC Motor Brushless EC 380V/220V High Power Variable Speed For Farm Duty Fan 0 More information of Brushless DC Motor A brushless direct current motor (BLDC: Brushless Direct Current Motor), also known as an electronic commutation motor (ECM or EC motor) or synchronous DC motor, is a synchronous motor that uses direct current (DC) power supply. The brushless DC motor is essentially a permanent magnet synchronous motor that adopts DC power input and becomes a three-phase AC power supply with an inverter. There are various types of motors, and brushless DC motors are the most ideal speed control motors today. It integrates the advantages of DC motor and AC motor, not only has the good adjustment performance of DC motor, but also has the advantages of simple structure of AC motor, no commutation spark, reliable operation and easy maintenance. Therefore, it is well received by the market and is widely used in automobiles, home appliances, industrial equipment and other fields.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

With Ce Certification Abs 3 Function Electric Hospital Bed For Patient Functions * 5 Functions * The height adjustment range from 500mm-1000mm, can fit the C-arm * Bed extension: The integrated bed extension adjusts the mattress platform length to the individual’s height * Cardiac Chair position * Reduce the pressure on the patient's heart * Weighing system,accurate to 0.01Kg, with data storage system store 10times datas * CPR- quick release back part * Electric CPR—one key to release of backpart * Dural side handle to release of backpart with damping device which can let the back rest fall down slowly to ensure the safety of the patient, single-hand operation. * One button Trendelenburg, release Abdominal pressure and prevent shock * Nurse lock funtion, one button flat. * Alarm Away System * Used to monitor the movement of patient during transitional rehabilitation * 5" directional wheels,during the movement can well control the direction. * Night light underneath the bed helps patient getting up at night Technical parameter Model YA-D5-5 Size 2200*1060*510-800mm Lying surface 1960*900mm Overall Height 510-800mm Back section adjustable 0° to 75° Knee section adjustable 0° to 40° Trendelenburg 0～12° Reverse-trendeleburg 0～12° Safe working load 225kg

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications & , lt; , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.

4G GPS Tracker 4G TK401 Fuel Monitor Remotely Engine Stop and Resume For Car & Motorcycle tracking            Model  : 401 A & B & C & D GPS-401A/B for Electric motorcycle/car tracking  GPS-401C/D for motorcycle car tracking with relay oil engine stop function *B & D with remote control   1. Summary This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker Vehicle GPS tracker with built-in GPS/GSM antennas ,Anti-theft GPS car tracker 2. Specifications < , br>Content Specification DIM 6.78×4.1×2.15cm Weight 50g Network GSM/GPRS/GPS Band 4G (B1/B2/B3/B4/B5/B7/B8/B28/B40) 2G (1900/1800/900/850 MHz) GPS sensitivity -165dBm GPS accuracy 5m GPS start time Cold status  45s Warm status  35s  Hot status  1s Car power supply 9V -100V Back up battery Chargeable 3.7V 450mAh Li-ion battery Storage Temp -40°C to +85°C Operation Temp. -20°C to +65°C Humidity 5%--95% non-condensing Product Description Please ask a qualified engineer to install it. The installation environment should ensure that the GSM and GPS signals are good  Please do not install it in a dusty and humid environment. Find the 5PIN wiring harness provided with the product, insert it into the corresponding wiring hole of the product, and connect to the original car circuit as shown in the following Wiring Diagram: Wiring Diagram Electric motorcycle/car Application: , * Electric motorcycle/car * Motorcycles,Vehicles * Private car anti-theft * Fleet management * Car rent * Insurance company  Functions: 1 Changing password 2 Authorization 3 Single tracking 4 Tracking Scheme 5 Smart angle updating 6 Location based service (LBS) / Cell-ID tracking 7 Listen 8 Forwarding incoming SMS messages 9 SIM Card Balance Enquiry 10 ACC ON/OFF Alert 11 Lock motor(For A/B model) 12 Remote boot/off motor(For A/B model) 13 Remote immobilizing(For C/D model) 14 Configure times of alarm SMS 15 Alarms 16 Remote control function(For B/D model) 17 Arming 18 Silent Arming 19 Disarming 20 Alarm function in arming state 21 Check Status 22 Check IMEI 23 Local time setting 24 Reset Hardware 25 TCP / UDP switch 26 SMS Mode 27 Configure SMS monitoring center number 28 Configure heartbeat package interval 29 Initialization , FAQ Q:What is the MOQ? A:10pcs for your own available designs Q:Can i mix different designs A:Yes Q:Can i get a lower price if I order large quantities? A:YES,cheaper prices with more bigger size orders Q:Can i get the pre-production sample ? A:yes ,for OEM order,it is ok to send samples for confirmation before mass  production Q:When you ship my order ? A:Normally 3-5days after receiving deposit,but it can be negotiated based on order  qty and production schedule Our Services Warranty 1. All products have been strictly Quality Checked in house before packing. 2. All products have been well packed before shipping. 3. One year warranty is provided for all models. We will bear maintenance cost during warranty. Delivery DHL/Fedex , /UPS/TNT/ARA/EMS/By air/By sea and so on are optional, we can send goods by shipping ways you want. 1. Sample and mini order will be delivered within 1-2 working days after the receipt of payment. 2. For order over 500pcs or customized order, lead time will be 3-15 days after the receipt of payment. Please contact our sales to make sure the current inventory. OEM&ODM Service 1.Customize logo and brand print on the device 2.Customize box 3.Offer firmware modification service 4. Customize design in bulk order We are at your service within 24 hours. Contact Person: Annie Huang   Company Information Company profile Shenzhen Coban Electronics co., Ltd is a private export-oriented enterprise founded in 1999, 90% of the products are exported, and we have many years of research and development, production and management experience in automotive electronics, security products, wireless communications terminal equipment, and other fields.As a high-tech enterprises,we have a strict management system, and have obtained the authentication of CCC, CE, FCC and UL ISO9001, etc. So far, our products have been well marketed in 107 countries and regions in the world. Our company has set up research and development centers, including GPS R & D department,  GSM R & D department and system integration Department. All the products are developed independtly and obtained a number of national patents. So the professional R  D team, efficient production team provide good foundation with high-quality products. Quality has always been part of the company's most stressed. Before all the products entering the market, they have been tested rigorously such as high and low temperature aging test, vibration test, the noise tests, audio and video indicators decomposition tests.Our company specialized in GPS tracker, car anti-theft alarm system.