Offers to Sell

Corrugated board is also called profiled board. It uses colored coated steel plate, galvanized plate and other metal plates to roll and cold bend into various wave profiled boards. It is suitable for roof, wall and internal and external wall decoration of industrial and civil buildings, warehouses, special buildings and long-span steel structure houses. It has the characteristics of light weight, high strength, rich color, convenient and fast construction, earthquake resistance, fire prevention, rain proof, long service life, maintenance free and so on. Convenient construction and installation, reduce the workload of installation and transportation, and shorten the construction period; Profiled steel plate is an environmental protection building material, which can be recycled.

Minimum Order: 1 bags

PPGI & PPGL (prepainted galvanized steel & prepainted galvalume steel) It is a product made of hot-dip galvanized steel sheet, hot-dip galvalume steel sheet, electro galvanized steel sheet, etc. Aftersurface pretreatment, one or several layers of organic coating are applied on the surface, and then baked and solidified. Product Advantages 01.Anticorrosive:17 years in heavy industrial areas. 02.Cheap:The cost of hot-dip galvanizing is lower than that of other coatings. 03.Reliable:The zinc coating is metallurgically bonded to the steel and forms part of the steel surface,so the coating is more durable. 04.Strong toughness:The galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use. 05.Comprehensive protection:Every part of the plated piece can be galvanized,and is fully protected even in depressions,sharp corners,and hidden places. 06.Save time and energy:Galvanizing process is faster than other coating methods.

Minimum Order: 1 bags

Color coated steel coil referred to as color coated steel coil, this kind of plate surface color novel, strong adhesion, corrosion resistance and decorative good, and good processing performance, so it is widely used. It is used in building exterior wall clapboard, roof board, corrugated board, waterproof and air permeable board, corrosion resistant equipment and components as well as furniture, automobile shell, water baffle and so on. According to the different structure, color coated steel plate can be divided into the following types: 1. Coating steel plate: With galvanized steel plate as the base, the front and back of the coating, to ensure its corrosion resistance. The first coat on the front is primer, usually epoxy primer because of its strong adhesion to the metal, and the back is also coated with epoxy or acrylic resin; The second layer (surface layer) used alkyd resin, generally with polyester coatings or acrylic resin coatings. 2. PVC steel plate: PVC layer is thermoplastic, the surface can be hot processing, such as embossing can make the surface texture rich, but it also has flexibility, can be bent and other secondary processing, its corrosion performance is also better. There are two types of PVC steel plate, one is produced by coating paste PVC method, called coated PVC steel plate: the other is to have been formed and printed or embossed PVC film affixed to the steel plate, called coated PVC steel plate. 3, heat insulation coating steel plate: Heat insulation coating steel plate is pasted with 15-17 mm thick polystyrene foam or rigid polyurethane foam on the back of color coated steel plate, which is used to improve the performance of coated steel plate. It is mainly used for special fields that need heat insulation and sound insulation. 4, high durability coated steel plate: The durability and corrosion resistance of color coated steel plate can be improved by applying the high durability coated steel plate to the surface coating of steel plate with good aging resistance of fluorine plastic and acrylic resin.

Minimum Order: 1 bags

ID 8mm L 10m WP 20 BAR BP 60 BAR Rubber Air Hose , 1/4" BSP Quick Release Connectors Exported to: British, Portugal, etc. Hose Structure: Tube: NR& SBR synthetic rubber. Reinforcement: High tensile polyester fiber braided. Cover: NR & SBR or SBR& EPDM synthetic rubber. Temperature resistance Range: -30℃ - +70℃ Color Choice: Red, Yellow, Black etc. Hose Application: Mainly used for conveying of air for air compressor machine. Length: 10m, 20m, etc Specification of hose: Item code Inner Diameter Outer Diameter Working Pressure Burst Pressure Length Weight inch mm mm bar psi ba , r psi m/pc kg/pc HPR1　 1/4" 6 12 20 300 60 900 10 1.7 HPR2　 1/4 , " 6 12 20 300 , 60 900 20 3.3 HPR3　 5/1 , 6" 8 15 20 300 60 900 10 2.1 HPR , 4　 5/16" 8 15 2 , 0 300 60 900 20 4.1 HPR5　　 3/8" 10< , br> 17 20 300 60 90 , 0 10 2.5 HPR6　 3/8&q , uot; 10 17 20 300 < , br>60 900 20 4.9 Specification of fittings: German or Universal 3 in 1 quick coupler and plug. ID 8mm L 10m WP 20 BAR BP 60 BAR Rubber Air Hose , 1/4" BSP Quick Release Connectors 0ID 8mm L 10m WP 20 BAR BP 60 BAR Rubber Air Hose , 1/4" BSP Quick Release Connectors 1 Competitive Advantage of PASSION Hose: PASSION® Rubber air hose assembly, is popular in Europe market, made of non- recycled rubber, according to ISO-2398 standard. Hangzhou Paishun can crimp the specified fittings and quick released coupling on the rubber air hose. If you have some special request of size, Hangzhou Paishun can also customize for you.

inquiry contact to below www.arenacamera.com order@arenacamera. , com ITEM INCLUDED LM-V1 LCD Touch Panel Monitor LA-V1 LCD Attachment Unit HDU-2 Handle Unit GR-V1 Camera Grip SS-1200 Shoulder Strap CA-A10 AC Adapter BP-A30 Lithium-Ion Battery CG-A20 Battery Charger CA-CP200B Compact Power Adapter Eyecup Mic Holder Unit 1 x Tape Measure Hook Thumb Rest Body Cap Limited 1-Year Warranty

Minimum Order: 1 bags

（Prices and details can be contacted by email or phone） Flange Parts are important joining function parts, which used in many important connection joint of devices and machinery. It normally connect pipe system with other equipment, valves, etc. while offering reliable connection effect and allows dismissing and changing to improve updating of the joint connection. So, in some way, flange parts are many choices of devices to replace welding connection. Normally Flange parts are made of metal materials, such as Aluminum, Steel, Stainless Steel, etc. It is made by CNC turning and milling process, or made by CNC machining center machine with multi processes combine. The finishing treatments on flange parts depends on the material used and the devices function. none-treatment, or anodizing, or passivation or coating are commonly used on flange parts surface. Asianstar produces flange parts for clients with long term experience. We understand the flange parts function and its key point of fixing positioning, our skillful team can produce small and large flange parts with best solution to make sure the products in qualified result. https://www.asianstarcnc.com/products/f , lange-parts

Minimum Order: 1 bags

inquiry contact to below www.arenacamera.com order@arenacamera. , com SPECIFICATIONS Digital SLR Information Effective Megapixels 100 Megapixels Sensor 53.4 x 40.0 mm CMOS sensor ISO Sensitivity 64-12800 Compatible Memory Card CompactFlash, SD, SDHC, SDXC Lens Mount Hasselblad H LCD Monitor Type TFT type, 24 bit color, 920K pixels LCD Screen Size 3.0" Connectivity USB 3.0 (5 Gbit/s) Type-C connector, Mini HDMI, Audio In/Out Shutter Speeds 60 minutes - 1/2000 sec Battery Rechargeable Li-ion battery (7.2 VDC, 3200 mAh) Dimensions 153 x 131 x 205mm Weight 2115g Continuous Shooting Speed Up to 30 fps Wi-Fi yes

Minimum Order: 1 bags

inquiry contact to below www.arenacamera.com order@arenacamera. , com SPECIFICATIONS Digital SLR Information Effective Megapixels 26.2 Megapixels Sensor CMOS, 35.9 x 24 mm ISO Sensitivity 100-40000 Compatible Memory Card Secure Digital (SD/SDHC, SDXC) Card Lens Mount Canon EF LCD Monitor Type Swivel Touchscreen LCD LCD Screen Size 3.0" Connectivity 1/8" Microphone, Canon N3, HDMI C (Mini), Mini-USB, USB 2.0 Lens Focal Length Multiplier Full-Frame (1.0x Crop Factor) Viewfinder Optical Exposure Modes Aperture Priority, Auto, Manual, Programmed Auto, Shutter Priority Built-in Sync Contact Hot Shoe Shutter Speeds 30 - 1/4000 Second , Bulb Mode Built-in Flash no Battery LP-E6N Rechargeable Lithium-Ion Battery Pack, 7.2 VDC, 1865 mAh Dimensions 5.7 x 4.4 x 2.9" / 144.0 x 110.5 x 74.8 mm Weight 1.51 lb / 685 g Focus Modes Automatic (A), Continuous-Servo AF (C), Manual Focus (M), Single-servo AF (S) Continuous Shooting Speed Up to 6.5 fps Image Stabilization Digital, 5-Way White Balance Auto, Cloudy, Color Temperature, Custom, Daylight, Flash, Fluorescent (White), Shade, Tungsten Video Resolution 1080 HD Focus Type Auto & Manual Wi-Fi yes

Minimum Order: 1 bags

FOR CHEVROLET N300 / N300P / N200 Aluminium Engine Assembly / B12D / Chevrolet N300 / N300P / N200 0 Aluminium Engine Assembly / B12D / Chevrolet N300 / N300P / N200 1 Aluminium Engine Assembly / B12D / Chevrolet N300 / N300P / N200 2 Aluminium Engine Assembly / B12D / Chevrolet N300 / N300P / N200 3

（Prices and details can be contacted by email or phone） Turning Shaft is one the most common CNC turning parts. It is made of metal or plastic materials by CNC turning process in high precision or by forging process in low-required tolerance. Turning shaft is normally made of steel, stainless steel, brass, aluminum or plastic materials. The material of turning shaft are chosen according to the function of the product. Shaft is a fixing center for rotating action of the product, which is key component for positioning and stability of product. Turning shaft is easily made out by CNC turning process, different material shaft use different cutter and turning lathes. And also different finishing treatments are applied due to its function demands. The concentricity, smoothness, strength, tolerances are most important indexes for turning shaft quality because it is working for rotating action. If the concentricity and accuracy requirements are low and demand in huge qty, we can also choose forging process to produce turning shaft shape and then CNC turning on the details of forged shaft. Asianstar produces many different kinds of turning shaft by long term with experiences. We understand very well on shaft materials, shaft functions and its quality standards and related finishing treatments. We have great advantages to produce turning shaft due to our abundant facilities and experienced skills. https://www.asianstarcnc.com/products/t , urning-shaft

Minimum Order: 1 bags

Product Description Commercial Accordion Sliding Soundproof Thermal Break Glass Aluminium Bifolding Doors Technical Information Product Name Aluminum Alloy Floding Doors Material Aluminum Alloy 6063-T5 Open Type Horizontal Folding Profile Thickness 1.2mm / / 1.6mm / 2.0mm Profile Color White / Matte Brown / Gray / Bronze / Wood / Custom Surface Treatment Powder Coating / Anodizing / Electrophoresis / Wood Grain / Custom Glass Type Single glass / Double glass / Tempered glass / Low-E glass / Laminated glass / Floated glass Glass Color Clear / Gray / Green / Obscure / Custom Glass Thickness 4MM-12MM / Custom Double Glass 5MM+12A+5MM / 5MM+20A+5MM / Custom Hardware Made in China Packing Air Bubble bag+Wooden frame or depend on customer requirement Application Residential and commecial projects About Us BUNGE Company always provides our clients with quality and budget movable partition and sliding folding door solutions. We offer considerate services like video calls for effective communication; Photos inspection before delivery; Updates during and after production, delivery, shipment schedule etc. Packing & Shipment Sliding folding door when we finished production, we will use carton packing and MDF board to pack movable panels and folding door. And we will also make one or more packing boxes for clients. It can reduce damage during transportation. We usually transport movable panels by sea, such as CIF price.

RUBBER ANTIOXIDANT RTENZA TMQ (RD) Chemical Name 2,2,4-Trimethy1-1,2-Dihydroquinoline content Molecular Formula (C12H15N)n Molecular Structure Molecular Weight (173.26) n CAS No. 26780-96-1 Specification Item Specification Appearance Amber to brown flake or Granular Softening Point,℃ ≥ 80.0-100.0 Loss on Drying, % ≤ 0.50 Ash, % ≤ 0.50 Properties Amber to light brown flake or granular. Not soluble in water, soluble in benzene, chloroform, acetone and carbon disulfide. Micro-soluble petroleum hydrocarbons. Application The product is particular excellent ammonia antioxidant of heat resistant , anti-aging agent. Particularly suit to full-steel, semi-steel radial tire and it apply to many kings of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber producers and also suits to emulsion products. Package 25kg kraft paper bag. Storage The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.

Minimum Order: 1 bags

Flange Slewing Bearing & Light Slewing Bearing, Compared with normal type slewing bearing, the slewing bearings with flange has less weight but the same flexible when rotate, so when the machines have space limit and weight limit, then the slewing bearing with flange is the best choice. when produce this kind of slewing ring bearing, the key quality control is the run-out of the surface, SWBTEC engineer is with rich experience in such problem, we have keeping received order from German, Spain, Sweden, France customers, this help prove the quality stability. Features and Benefits of Flange Slewing Bearing & Light Slewing Bearing Due to the overall deformation of the flanged slewing bearing we produce is very small and the product quality is stable, we often receive repeated orders from old European customers. As one of slewing ring bearing manufacturers, we can produce flange slewing bearings that satisfy European customers is because we have mature flange processing technology. Generally speaking, our product raceway hardening treatment is intermediate frequency quenching and the large internal stress generated by temperature difference fusion cannot eliminate internal stress due to the large size of the flange but small cross-sectional area, resulting in excessive deformation. In order to solve this deformation problem, we adjusted the production process- adjusted the turning stop after quenching, so that the amount of deformation is reduced. Our company has been constantly adjusting the process according to different products to meet the product changes in the market.

Minimum Order: 1 bags

（Prices and details can be contacted by email or phone） Brass Pipe Fittings are common connector for devices and products, it is made of brass material by CNC machining process or forging process. Brass is one of the most important material for CNC machining parts. Due to brass material features of durable and non-rust and resilient soft and enough strength, it is most suitable to produce as fitting parts. Brass fittings are easily machined because of its material soft feature, so it is easy to make different structures of fittings which meeting various demands on connection structure. Our custom-made brass fittings totally follow clients technical drawings in structure and tolerance. Brass fittings brings many advantages on connector using: Beautiful looking of its gold color; Long durable using; Corrosion resistance; Complex structures available; Multi processes compatible; Surface treatment applicable, etc. Asianstar produces brass pipe fittings for clients with long term experience. We use turning or turning-milling or forging processes to carry out brass pipe fittings, we also apply electroplating or other finishing treatments on brass fittings surface according to components requirements. https://www.asianstarcnc.com/prod , ucts/brass-fittings

Minimum Order: 1 bags