Offers to Sell

HongVadar company provides you the Lysine, Tryptophan, Threonine, Valine, Leucine, etc. fermentation products project. HongVader as agricultural processing plants play the roles of corn, sweet corn processing plant, potato processing plant, starch of corn and wheat processing plant, taking wheat, rice, cassava processing, msg project, and production lines of ethanol glucose, DMH, fructose, sorbitol. Multi-effect TMR Evaporator System HVD-EV-T series TVR vacuum evaporation equipment is a kind of compressor evaporator condenser system. The multiple effect evaporator working principle is using secondary steam many times according to the theory of vacuum low- temperature evaporation to save steam energy. According to the evaporation capacity and energy-saving requirements, it can be divided into single effects, two effects, three effects, four effects, five effects, and so on. The structure is divided into falling film, forced falling film, forced circulation, and so on. Multiple effect evaporators are used to evaporate heat-sensitive, high concentration, high viscosity, and corrosive materials, and suitable for concentration of corn steeping liquid and maltose syrup in starch & glucose industry, fruit juice and flavored semen in the food industry, liquid milk in the dairy industry, sugar juice in the sugar industry and distiller's grains filtrate in the alcohol industry. As one of the reliable evaporation equipment manufacturers, we make different types of multiple effect evaporator for sale, such as single effect evaporator and forward feed multiple effect evaporator with the best evaporation machine price. Main feature of Multi-effect TMR Evaporator System     The whole compressor evaporator condenser system is designed reasonably and beautifully, running stably, highly efficient and energy-saving, and low steam consumption. High concentration ratio, falling film evaporation, so that the viscosity of the material liquid easy to evaporation, and short time concentration. Special design, realize switching efficiency through simple operation to adapt to the production of different products. Low evaporation temp, suitable for the concentration of heat-sensitive materials. High heat transfer coefficient and high evaporation rate, which can prevent the "drywall" phenomenon.  High separation effect and greater flexible operation. Compact structure, small floor area, and simple & smooth layout. In and out of the material continuously. The material liquid can reach the required concentration after passing through the equipment once. If the material needs continuous sterilization treatment, the sterilization, and concentration of two processes can be completed at one time.  Equipped with CIP cleaning pipeline. The calandria type evaporator can be cleaned on the spot. The whole equipment is easy to operate without dead Angle. The power control is realized by the control cabinet, and the automatic control system can be installed according to the user's requirements. Special pump, reliable seal, stable performance, little maintenance, and smooth operation. MVR Evaporator System HVD-EV-M series MVR compressor evaporator condenser system compresses the secondary steam generated by the steam according to the principle of mechanical compression, so as to raise its temperature to a certain extent and return the heating system to replace the raw steam as the heat source of the heater, so as to make full use of the waste stream, recover the latent heat, improve the thermal efficiency, and achieve the purpose of saving steam energy. At the same time, mechanical recompression evaporator/mechanical vapour recompression evaporator/vapor recompression evaporator also reduces the demand for external cooling resources, reduces energy consumption, and reduces pollution. This product of mvr evaporator design and technology is mainly used in multi-effect evaporation and crystallization equipment.  Evaporator System Technical Parameters Multi-effect TMR Evaporator System Technical Parameters Comparison and Evaluation Table of MVR and Five-effect Evaporator

Minimum Order: 1 bags

HongVadar company provides you the Lysine, Tryptophan, Threonine, Valine, Leucine, etc. fermentation products project. HongVader as agricultural processing plants play the roles of corn, sweet corn processing plant, potato processing plant, starch of corn and wheat processing plant, taking wheat, rice, cassava processing, msg project, and production lines of ethanol glucose, DMH, fructose, sorbitol. In the starch separation process, HVD-SP-P series high speed starch disc separator produces very high centrifugal force due to high speed rotation, which improves the separation machine efficiency and maximizes the production efficiency. High speed separator has the advantages of all kinds of separator, small vibration, large handling capacity and stable operation. It is mainly used in pre-concentration of starch, separation of starch and gluten, concentration of gluten (protein) and clarification of water in the process. Disc Separator Features Large rotary drum diameter, large disc area, strong processing (separation) ability, good separation effect: Using the upper suspension drive, so that the high speed starch separator has a high degree of rotation stability, and greatly improved the service life of the bearing and spindle; Automatic control of lubricating oil circuit is adopted to protect the driving system and extend the service life of the driving system; Large nozzle is adopted to ensure the continuity of production with large feeding capacity and small blocking opportunity: Equipped with a drum lifting hydraulic system, which makes high speed starch disc separator more convenient to overhaul the drum and replace the nozzle; The drum is made of imported high-strength corrosion-resistant stainless steel, which ensures the safety and stable operation of the high speed starch disc separator ; The high speed starch disc separator can be started without load; Can handle materials of various concentrations without internal adjustment; The high speed starch disc separator has an internal circulation system to keep the separation stable and facilitate accurate adjustment and control. Simple operation, operators can quickly master the operating procedures. Disc Seperator Technical Parameters

Minimum Order: 1 bags

HongVadar company provides you the Lysine, Tryptophan, Threonine, Valine, Leucine, etc. fermentation products project. HongVader as agricultural processing plants play the roles of corn, sweet corn processing plant, potato processing plant, starch of corn and wheat processing plant, taking wheat, rice, cassava processing, msg project, and production lines of ethanol glucose, DMH, fructose, sorbitol. Desand Cyclone HVD-CY-DS series desand cyclone is mainly used in starch production to remove sediment, metal particles, and other impurities in starch milk. The desanding hydrocyclone for sale is also suitable for removing heavy phase impurities in other fluids. There are two kinds of cyclone particle separator bodies: stainless steel cyclone separator & ceramic and high-strength wear resistant plastic. Advanced design, easy installation, and high efficiency of sand removal. Desand Cyclone Working Principle Under the pressure of 0.5MPa, the starch milk enters along the tangent direction of the desander and generates centrifugal force due to the rotary movement. Due to the different specific gravity of the material, the heavy phase impurities such as sand are thrown to the periphery and discharged along the inner wall from the bottom. And the starch milk overflows through its upper overflow pipe into the next process. Desand Cyclone Technical Parameters HVD-CY-DS series desand cyclone Model Capacity, m3/h Feed pres., MPa Desand efficiency, % Remarks HVD-CY-DS1 30-35 0.5 ≥97 2+1 cyclones HVD-CY-DS2 60-70 4+2 cyclones HVD-CY-DS3 90-100 6+2 cyclones HVD-CY-DS4 120-130 8+2 cyclones HVD-CY-DS5 150-160 10+2 cyclones Degerm Cyclone HVD-CY-GM series germ cyclone separator use is mainly about separating the germ after the corn is coarsely broken. As one of the two types of single cyclone separator, this equipment is static with simple structure, advanced design, easy installation, and large production capacity range. Germ Cyclone Working Principle The crushed material enters from the tangent direction through the feeding inlet under a certain pressure. Due to the different specific gravity of the germ and the corn slurry, under the action of centrifugal force, the free germ discharge through the overflow outlet, and the corn slurry is discharged from the lower part. Germ Cyclone Technical Parameters HVD-CY-GM series germ liquid cyclone HongVadar relies on professional design, strict production management, the fine processing procedure, provides high efficiency and energy-saving equipment system for the customer. The manufacturing factory has passed the international ISO9001 quality system certification, and with the design and manufacturing capacity of pressure vessels. Customers can choose international ISO, EU CE, and other standards for equipment design and production according to their needs. Desand Cyclone and Germ Cyclone Parameters Desand Cyclone Technical Parameters HVD-CY-DS series desand cyclone Germ Cyclone Technical Parameters HVD-CY-GM series germ cyclone If you want to know hydrocyclone price and cyclone separator price, please contact us.

Minimum Order: 1 bags

HongVadar company provides you the Lysine, Tryptophan, Threonine, Valine, Leucine, etc. fermentation products project. HongVader as agricultural processing plants play the roles of corn, sweet corn processing plant, potato processing plant, starch of corn and wheat processing plant, taking wheat, rice, cassava processing, msg project, and production lines of ethanol glucose, DMH, fructose, sorbitol. The production capacity is diversified from 10000 tons per year to 600000 tons per year. HVD-DM-P series degerm mill is a larger coarse crushing equipment in wet corn starch production process. The maize degerminator machine/corn degerminator machine is suitable for corn to break up once or twice after steeping so that the germ, skin, and endosperm are separated from each other. HongVadar relies on the professional design, the strict production management, the fine processing procedure, provides the high efficiency and energy saving maize degerminator machine/corn degerminator machine/corn degerminator for the customer. Manufacturing factory has passed the international ISO9001 quality system certification, and with the design and manufacturing capacity of pressure vessels. Customers can choose international ISO, EU CE, and other standards for equipment design and production according to their needs. Features of Degerm Mill Good grinding effect. Stable running and low failure rate. Easy operation and convenient maintenance. Compact structure and reasonable configuration. Degerminator/Degerm Mill Technical Parameter

Minimum Order: 1 bags

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. High Ingress Protection VFD Motor High Ingress Protection VFD motor is mainly used in excavators in the field of construction machinery, port bucket wheel stacker-reclaimer, and electric drive fracturing complete sets of equipment matched with fracturing skids and sand mixers in oil well sites. The company's series of products have AC and DC, of which AC power supply products adopt AC power supply and adopt integrated design, with small volume, compact structure, saving installation space, high efficiency and energy saving, and are mainly used in construction machinery, ports and other fields; DC power supply products adopt DC power supply, inverter part, and motor part are combined into a whole, with high protection level. This kind of VFD compatible motor is mainly used in oil well sites and other fields. Specifications of the High Ingress Protection VFD Motor Model Power（kW） Voltage（V） Current（A） Speed（r/min） Insulation Ingress protection YKVFT-450-6 400 600 450 580 H IP44 YKVFT-450-6 500 600 565 690 H IP44 YKVFT-630-6 1200 600 1337 580 H IP44 YVFT-500-6 1500 600 1750 750 H IP44 YKVFT-355-4 315 600 354 2200 H IP54 YKVFT-315M-4 110 380 200 1485 H IP44 YVFT-315M-4 132 380 260 1490 H IP44 YKVFT-315L2-4 200 380 355 1490 H IP54 YKVFT-315L3-4 280 380 500 1480 H IP54 YKVFT-355L-4 315 380 600 1800 H IP54 YKVFT-450-6 400 450 807 1000 H IP44 Features of the High Ingress Protection VFD Motor Optional AC or DC power supply Compact structure for space saving High VFD motor efficiency and energy saving High protection Application of the High Ingress Protection VFD in Motor Applications on electric frac spread for oil &gas and contruction equipment such as excavators,bucket wheel stacker.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. High Ingress Motor We can supply high ingress protection motors for excavators, bucket wheel stackers, reclaimers at ports, and fracturing machinery for oil and gas. Features of the High Ingress Motor High insulation performance and large starting torque; Small size and light weight; Long service life.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. The frequency converter is also called voltage and frequency converter. CCS has mastered the most advanced frequency conversion speed regulation technology. We can provide customers with high ingress protection converter, high ingress protection transformation converter, and explosion-proof variable frequency converters, which are widely used in special environments such as oil and gas, chemical industry, and coal mines. The VFD frequency cRonverter has the characteristics of high reliability, high protection, and high efficiency, and meets the needs of customized frequency converters. Frequency Converter Application 1. Voltage and Frequency Converter for Cooling Tower: The use of a voltage and frequency converter on a cooling tower fan is the most useful means to control leaving water temperature on critical process water applications. Frequency Converter can help save energy and reduce the noise of cooling tower in non- peak periods and benefit the life of the frequency converter components with fewer starts, smoother starts, and built-in motor diagnostics. 2. Voltage and Frequency Converter in Mining Applications: Voltage and frequency converter are now finding wide use in mining applications. 3. Voltage and Frequency Converter for Water Pumps: The installation of voltage and frequency converter on water pumps can be an effective energy saving measurement. Voltage and frequency converter can be installed on all water pumps, including those associated with HVAC systems. Benefits of Using Frequency Converters 1. Speed regulation and saving energy, which can save energy by lowering the motor speed when it is not necessary to run at full speed. 2. Soft start can be used to prolong the service life of the voltage and frequency converter. 3. The motor control system is simplified. 4. Reduce mechanical wear and loss. How does A Frequency Converter Work? The electric frequency converter mainly adopts AC-DC-AC mode, which first converts the power frequency AC power supply into DC power supply through the rectifier, and then converts the DC power supply into AC power supply with controllable frequency and voltage to supply the motor. The voltage and frequency converter converts a basic fixed-frequency, fixed voltage sine-wave power (line power) to a variable-frequency, variable-voltage output used to control speed of induction motors. Frequency Converter VS VFD 1.Power Supply: VFD is composed of AC-DC- AC (modulation wave) circuits. Voltage and frequency change proportionally at the same time and can not be adjusted separately, which does not meet the requirements of the AC power supply. In principle, it can not be used for power supply, and VFD is generally used for speed regulation of three phase asynchronous motor. The whole circuit of frequency converter consists of AC-DC-AC-Filter Circuit, so the output voltage and current waveform are pure sinusoidal, which is very close to the ideal AC power supply. Voltage and frequency converter can output the power grid voltage and frequency of any country in the world. 2.Load Test: VFD(variable frequency drive motor) can't use in load tests because of high vibration and electromagnetic noise, large temperature rise, and the instruments can't work normally. So the voltage to frequency converter that can provide a pure sine wave output becomes indispensable power equipment in the laboratory. 3. Converter: A VFD is not a typical converter though it has conversions inside it. A voltage frequency converter would typically convert a DC signal to an AC signal.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. Flameproof Permanent Magnet Motorized Pulley Flameproof Permanent Magnet Motorized Pulley is a further development of permanent magnet direct drive system, which integrates permanent magnet synchronous frequency conversion motor with belt conveyor drive drum and truly realizes mechatronics. The VFD compatible motor not only inherits the advantages of a permanent magnet direct drive system, but also has the characteristics of further eliminating low-speed coupling, occupying very little space, convenient installation, and construction, etc.. Features of the Flameproof Permanent Magnet AC Synchronous Motor Pulley The outer rotor structure has no reducer mechanism inside, the permanent magnet synchronous electric roller shaft is stationary and the outer rotor rotates when working; The outer rotor permanent magnet is embedded and installed, which effectively protects the permanent magnet, has no risk of falling off, and has high reliability; The low-speed coupling is omitted, and the transmission efficiency is higher; Ceramic encapsulation, good wear resistance. Application of the HP Explosion Proof Permanent Magnet Motorized Pulley Application on belt conveyors.

The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, focuses on the development of the electrical power transmission equipment in the industrial automation area, including integrated VFD motor, special converter, special high-performance VFD motor, power control equipment, and power supply products. The asynchronous integrated VFD motor and the permanent magnetic integrated synchronous VFD motor, as the core products of CCS, organically integrate the frequency converter and the motor, which can replace the separated transmission type of “converter+motor”, obtaining the market-leading position in the high-end transmission equipment of minging industries of coal and oil&gas. Flame Proof Asynchronous VFD Motor The VFD motor can run in hazardous environments, such as Coal companies and chemical plants. Flameproof and intrinsically safe high-voltage integrated VFD Motor is a highly integrated product of the motor and the drive. It is widely applicable to belt conveyors, loaders, AFC's, emulsion pumping stations, and other equipment used in underground coal mining that matches with the motor and has the same size, to achieve a soft start under heavy load and dynamic speed control. We can provide all kinds of explosion-proof certification according to the needs of customers in different countries. Specifications of the Flame Proof Asynchronous VFD Electric Motor Voltage range 380V/400V/600V/660V/3300V/4160V/6000V/6600V/10000V , Frequency 50Hz/60HZ Voltage fluctuation range at grid -15%-10% Frequency fluctuation at grid ±0.2Hz Speed range 0-2200rpm Output frequency 0-120Hz Power rating 45kW-2000kW VFD principle Voltage source inverter Motor type Asynchronous motor Control method V/F or DTC without sensor Starting torque 2 times Frequency resolution 0.01Hz Ingress protection IP54 pr IP55 Installation IMB3 or IMB5 Communication CAN、RS485、Profinet、Ethernet IP etc Features of the Flame Proof Asynchronous VFD Motor Small impact to the grid and the the machinery Less maintenance cost Improve VFD motor efficiency Space saving Anti-interference Applications of the Flame Proof Asynchronous VFD Motor Our manufacturing programme for induction asynchronous squirrel-cage motors includes motors used, among others, for: belt and armoured conveyors longwall shearers and roadheaders pumps fans plow systems

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. Explosion Proof VFD The explosion proof VFD is ommitted to intelligent control of mining. Improve the efficiency of the explosion proof electrical equipment, reduce the maintenance of the complete set of equipment, reliable operation to ensure production safety. With advanced design concepts and independent intellectual property rights, it has reached the international advanced level in terms of functionality and reliability. Specifications of the Explosion Proof VFD Input Voltage 660V/1140V Input Frequency 50Hz/60Hz Output Voltage 0-660V/1140V Output frequency 0-50Hz/60Hz Power semiconductor IGBT, Diode Input side of VFD Standard:6 pulse diode rectifier Option:6 pulse IGBT rectifier Quadrant Standard:2-Q Option: 4-Q Frequency Resolution 0.01Hz Overload capacity 220% Communication Internet、CAN、RS485 IP IP54, water cooling. Features of the Explosion Proof VFD The software system has built-in control programs such as a scraper, conveyor, and pumping station; Direct torque control has high control precision, fast dynamic response speed, and output torque greater than 2.2 times rated torque, which is suitable for heavy load starting occasions. CAN bus communication is adopted to realize master-slave control and power balance of multiple devices, and optical fiber communication is supported to realize data transmission and control; Long-life thin-film capacitors are used; The frequency converter has various protection functions such as overload, overvoltage, under-voltage, phase shortage, overheating, power imbalance, short circuit, etc.

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. Electric Control Box The electric control box can realize the protection functions for the short- circuit, overload, phase loss, and overheating of the circuit and make the operation more intelligent. The electric control box in CCS Electric is of high reliability, strong anti-interference capability and is free of maintenance. Parameters of the Electric Control Cabinet Voltage Range 380V-1140V Current Range 400A-800A Circuit No 2-8 Circuits Features of the Electric Control Box Highly mature technology; High reliability and anti-interference ability; Easy maintenance; Good system compatibility; Deployable in hazardous environment with high vibration,high temperature and humidity and intense EMI. Application of Custom Electrical Control Panels Applications on the mining machinery and construction machinery for electrical control and protection against short-circuit, overload, phase-loss, over temperature.

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. In addition to motors and frequency converters, CCS can also provide control systems and power supply products, such as remote control systems, power supply units, electrical operation boxes, etc. Choosing a good power supply unit for the whole equipment is very important, as every component relies on the PSU. When selecting your PSU, weigh the benefits against the price of the power supply unit, and try to make a good investment. In case of the failure of the main power supply, you also need a backup power supply as a substitute. A power supply unit with battery backup and a power supply unit with generator backup are two types of backup power based on power sources. Nowadays, more types of backup power supply units are getting more and more popular and are up for sale. Electrical Power Supply Unit and Control System Applications The electrical power supply unit connects an electrical power source to a device using electrical energy. The electrical connection means are comprised of an electrically conducting liquid and an electrically conducting plunger. By dipping, the plunger can be in touch with the liquid for electrically connecting the liquid to the power source and the plunger to the device. The invention is suitable for electrically connecting an electrical source to the electrode of an oven for treating a charge such as a metal charge. As for electronic chemical discharge machining, it requires a DC power supply and 30 to 160 applied voltage. The main purpose is to design a low-cost programmable DC power supply unit for the electronics laboratory. Introduction to Control Systems A control system refers to a management system with its own goals and functions, which is composed of control subject, control object and control media. It means that it is possible to maintain and change in the desired manner any amount of interest or variation within a machine mechanism or other device.

CCS products are mainly oriented to coal mine, petrochemical, shipbuilding, metallurgy, electric power, large loading test bench and other fields. The electrical power transmission and control equipment have the characteristics of high protection, high efficiency, safety, environmental protection and energy saving. The electrical control devices integrates motor, frequency conversion control, system control and data transmission, and can provide customized products and solutions according to customer needs. CCS's is a power control equipment company that offers VFD motor products and transmission substation equipment are in a leading position in the world. We at CCS can provide customers with a variety of electrical transmission equipment and electrical control solutions, which can meet the needs of various working conditions. We strictly control the quality, from raw material procurement to factory test, and all is in accordance with IEC standards. As a professional power control equipment company, CCS has been providing mining with highly reliable electrical transmission equipment for more than 10 years. Recently, our customers have gradually expanded to oil and gas, port, steel, and other fields. Why Choose Electrical Transmission & Power Control Equipments in CCS Electric Professional Manfacturer The company, with a complete system for R&D, design, manufacturing, marketing, and maintenance service, is professional in the manufacturing of high-quality electrical transmission equipment & electrical control equipment. Well-equipped Production Facilities We have a large-scale motor assembly machine, motor automatic assembly machine, intelligent CNC winding machine, iron core automatic stacking equipment, solid insulation vacuum casting equipment, inverter production line, vertical machining center, and other production equipment. Complete Test Platform CCS has an advanced 12MW loading test platform, high-precision power analyzer, power frequency, and turn to turn to withstand voltage tester, torque tester, and other facilities of the test and inspection center, and has obtained ISO9001 quality management system certification. Good Development Prospect With the increasing demand for electrification and intelligence in the industrial field, CCS electrical control devices have a broad market prospect in the industries of engineering, port, shipping, metallurgy, cement and other industries.

CNC Anodized Aluminum 6061 Sheet Metal Automatic Products provided by Forlong are made of 6061 aluminum using the method of CNC milling, turning, and drilling machines by different equipment. From design to final production of custom cnc machined aluminum parts, we have the capability to assist you all the time. The small or large quantity of cnc aluminum parts / cnc aluminium parts can be achieved in the shortest time and sent to you hand. The process of aluminum cnc machining service is applied on the CNC machined aluminum parts. The technology of machining aluminum parts makes the thickness of the natural oxide layer higher on the surface of aluminum components, and improves its capacity of corrosion and wear resistance. Different colors can be dyed on custom machined aluminum and custom milled aluminum during the course of the process. More advanced surface treatments available to give your cnc aluminum drilling parts or milling parts a smooth surface finish. Advantages of Our OEM Anodized Aluminum Milling/Turning/Drilling Machine Parts Resist peeling, flaking, chipping, and falling off Easy to clean and maintain, no-fading, non-contaminating Full quality control system tracking each stage throughout the process High consistency, improved efficiency, and short lead time Advanced hi tech CNC technologies Country of Origin: CHINA Certs: ISO9001, CE Material: AL6061 Dimension: Customized Sample: Free Surface: anodizing Tolerance: 0.01-0.02mm Payment & Shipping Terms: MOQ: 100pcs Packaging Details: Customized L/T: 7-30 workdays Payment Terms: T/T, Paypal Supply Ability: 2000PCS/M Forlong Precision Machining is a professional cnc turning company, we provide custom cnc machining, custom cnc aluminum parts, bike parts for sale, oem cnc machining parts, cnc turning and etc. Contact us to buy our products or know more.

Minimum Order: 500