Offers to Sell

Application IPX1-6 rain test chamber, ip test chamber, water spray test equipment Applied to plastics, rubber, paint, coatings, printing ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, building materials, electricity and the electrical products; it provide an important testing data for scientific research, product development and quality control. Description When testing products in IPX1-6 water spray test chamber, place the sample on the turntable of the test chamber. After the test chamber is started, the water flow is controlled by the flowmeter and pressure, and enters the pendulum pipe through the pipe. According to the test requirements, the pendulum tube swings back and forth to pour water into the test object.  the pendulum tube swings 60° on both sides of the vertical line, a total of 120°. It's 15 cents a stick. The test lasted five minutes. Then rotate the case horizontally 90° and test for 5min. Structure: The door frame of the water spray chamber  is insulated with high temperature and aging resistant silicone rubber door seals, the outer shell is coated with rust-resistant cold-rolled sheet, and the outer box is made of SUS304 stainless steel, which has a long service life and is not easy to rust The rotary table is made of SUS304 stainless steel, which has good corrosion resistance. The height of the turntable can be adjusted, because the height of the test sample and the height of the Spiracle must have corresponding fixed values.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ rain spray test chamber swing tube is also made of 304 stainless steel. The swing tube drive adopts a stepper motor, which has the advantages of low noise, fast speed, and accurate angle. The standard water tank of the rain testing equipment has an automatic water intake function and is equipped with high and low water level alarm detection, which can effectively prevent the water pump from being damaged due to water shortage. The stress free door handle can open and close the test door with one hand, making it convenient and labor-saving.

Minimum Order: 1 bags

Features of product development · Rapid Temperature Cycling: Achieves rates up to 100°C/min for accelerated stress screening hass. · Multi-Axis Vibration: Combines pneumatic (6-DOF) and electrodynamic vibration for multi-stress accelerated life testing halt simulations. · Precision Control: halt process ±0.5°C temperature uniformity and real- time monitoring. · Customizable Profiles: Supports stress levels user-defined stress protocols (step-stress, dwell times). · Durability: Robust construction with corrosion-resistant materials If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Testing Standards · MIL-STD-810: Environmental engineering considerations for military equipment. · IEC 60068: International standards for environmental testing. · IPC-9701: Reliability testing for electronic assemblies. · SAE J1211: Automotive component validation guidelines.

Minimum Order: 1 bags

Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric temperature changes under the condition of rapid change in the basic safety test of electronic components, parts and products (whole machine) to provide reliability test, product screening, and so on, at the same time through this test, product quality control. Meet Standards GB/T 2423.1 (IEC60068-2-1);GB/T 2423.2 (IEC60068-2-2);GB/T2423.22;GJB 150.3A; GJB 150.4A; GJB 150.5A;GB/T10589; GB/T10592;GB/T11158.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ DESIGN FOR THIS THERMAL SHOCK TEST CHAMBER  thermal shock test chamber because of its excellent performance and reliability, has become the country's leading products, its export quantity is far ahead, favored by the international market, as thermal shock test chamber manufacturers, will continue to uphold the concept of innovation, quality and customer first, to provide partners with more advanced and more reliable products and services. Thermal shock test chamber (Two Zone) is suitable for testing equipment for solar photovoltaic modules, batteries, automotive parts, LED optoelectronics, semiconductors, aerospace, automobiles, home appliances, scientific research, etc., for testing and determining electrical, electronic and other products and materials. Parameters and performance of temperature and environmental shock changes in high and low temperature tests. Thermal shock test chamber (2 Zone) structure can be divided into two parts.  1.High temperature tank (preheating zone); 2.Cryogenic tank (pre-cooling zone).

Minimum Order: 1 bags

Application field Aerospace field: Application field of thermal vacuum test equipment. During the development and testing of spacecraft, it is used to simulate the high vacuum and extreme temperature environment in space to verify the performance and reliability of spacecraft and their components under these conditions. For instance, satellites, spaceships, detectors and other spacecraft all need to undergo thermal vacuum tests before being launched to ensure their normal operation in space. The electronics and semiconductor industry: Electronic components and chips need to be tested and packaged under specific temperature and vacuum conditions to ensure product quality and reliability. Materials Science: This device studies the physical and chemical properties of materials under extreme conditions, which is conducive to the development of new materials, such as high-temperature superconducting materials and radiation-resistant materials, to meet the needs of specific fields. The automotive industry: Automotive components (such as engine parts, sensors, etc.) need to be tested under specific temperature and vacuum conditions. Thermal vacuum testing equipment provides the necessary conditions for such tests, ensuring their performance and reliability in various environments. Military and national Defense: The military and national defense fields have extremely high requirements for the reliability and durability of equipment. Thermal vacuum test equipment can test the performance of military equipment (such as missiles, radars, etc.) under extreme conditions, ensuring their reliability on the battlefield.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Technic , al Specifications Capacity：0.5 m³ to 2.65 m³(Customizable) High Vacuum Level (mbar)：5.0×10−7 No-load Vacuum Level (mbar)：5.0×10−7(Room temperature) Vacuum Cube Leak Rate：1×10−9std/cc/sec Pressure Regulation in Multiple Ranges (mbar/Torr)：Adjustable Temperature Range： -190°C(LN2 cooling) to 150°C Temperature Uniformity：±2℃

Minimum Order: 1 bags

DESCRIPTION How can you make sure that aeronautical materials and components function properly even at high altitudes? Airplanes are designed to fly over land and water carrying people and goods, reaching very high altitudes and withstanding shocks and turbulence. For this reason, the reliability of their components and materials is - literally - of vital importance! You need to make sure that any elements function properly at high altitudes and withstand sudden changes in pressure. If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ solutions for altitude testing To meet all testing needs, the range of altitude chambers is available in both thermostatic (temperature and pressure control) and climatic (temperature, pressure and humidity control) versions.   Structure: Heated inspection window: a fully transparent double heating film allows the test compartment to be easily and clearly inspected and prevents condensation from forming on the glass. Self-levelling feet with excellent adherence and stability. Rounded corners allow better drainage of condensation drops and easy cleaning. A simple and reliable cooling Technical Specifications Temperature Range: -70°C to +180°C Altitude Simulation: Sea level to 43,000m (110-0.1 kPa) Rapid decompression: Achieve 16,800m pressure differential (4,550m → 21,350m) within 15 seconds Humidity Range: 10% to 98% RH Chamber Capacity: 10 to 100 m³ (customizable) Noise test：≤ 75dB Patent Number: CN201520670413.0

Minimum Order: 1 bags

The climate test chamber is a device that simulates various environmental climates, as well as transportation, handling, vibration and other conditions, to verify the quality of raw materials, semi-finished products and finished products. It is widely applied in numerous fields such as colleges and universities, aviation, aerospace, military, shipbuilding, electrical engineering, electronics, medical care, instruments and meters, petroleum instruments, petrochemicals, automobiles and motorcycles, etc. Working principle: It consists of two parts: temperature regulation (heating and cooling) and humidification. The air is discharged into the box by the rotating fan installed at the top of the box to achieve gas circulation and balance the temperature and humidity inside the box. The data is collected by the temperature and humidity sensors built into the box.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ Functio , nal features: It has the functions of setting the fixed temperature and slope. It has the functions of holding, segment skipping, waiting box and two sets of time signal output. It has the function of cold box/hot box start-up selection; It has an RS-232 communication interface, allowing for program design, monitoring, etc. on a computer. The precision range of some products is set with a precision of ±0.1 for temperature and ±0.1%R-H for humidity, and the indication precision is also ±0.1 for temperature and ±0.1%R-H for temperature. An imported microcomputer integrated humidity and temperature controller is adopted (the temperature directly displays the percentage).

Minimum Order: 1 bags

Application  Altitude Chamber for Electrical,electronic,military industry and household products. Design team according to GB,GJB and IEC standard,to do Low pressure altitude testing chamber high low temperature,humidity thermal,low pressure and other environmental and reliability test. General introduction:  Altitude Chamber  is composed of test room formed by pressure-containing box shell and insulation structure, refrigeration system, add wet system,vacuum system and electric control system and other components. can simulate temperature, humidity, altitude and vibration simultaneously to the maximum extent, to conduct a combined environmental system. Mainly used to simulate plateau climate or aviation and aerospace industry.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Standards GB10590-89 Low-temp/low-pressure testing GB15091-89 High-temp/low-pressure testing GB11159-89 General low-pressure testing GB/T2423.25-1992 Temp/pressure combined testing MIL-STD-810H Military equipment environmental engineering RTCA DO-160G Avionics equipment testing IEC 60068-2-41 Combined temp/low-pressure testing IEC 60068-2-13 High-temp/low-pressure testing ASTM E595-07 Outgassing under thermal vacuum ISO 7137:1995Aircraft environmental conditions

Minimum Order: 1 bags

The performance of the thermal vacuum test chamber is used to measure the working parameters and environmental parameters of the spacecraft or its components under simulated space conditions, so as to ensure their proper operation in the actual space environment. This includes monitoring the internal and external temperatures of the spacecraft, recording changes in working parameters, and evaluating the effectiveness of the thermal control subsystem. Through these tests, the rationality of the spacecraft's design can be verified, potential defects can be identified, and its reliable operation in the actual space environment can be ensured. Cycle frequency and duration Thermal vacuum tests usually involve multiple temperature cycles, each cycle including a holding stage of high and low temperatures. For example, the cycle frequency requirement for the qualification level test is at least 9.5 times, while the cycle frequency requirement for the acceptance level test is at least 3.5 times. In each cycle, the duration of the high and low temperatures is typically 8-12 hours.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/

Minimum Order: 1 bags

Industry-Leading Contamination Removal for Lithography, Optics & Wafer Processing This equipment adopts an innovative inclined sealing structure (patented design-Thermal Vacuum/Lithography/UHV). Through the gravity-adaptive cover plate and double-ring sealing ring interlocking technology, it can maintain a stable vacuum level (≤10⁻⁶ Pa), solving the problem of reduced cleaning efficiency caused by sealing failure in traditional equipment. It integrates a dual-fluid spray system (sodium hydroxide + deionized water), supporting non-destructive cleaning in a high-temperature (350℃) vacuum environment, avoiding thermal stress deformation. It is suitable for the maintenance of high-precision components such as mask plates, lens groups, and vacuum pump components of lithography machines, significantly improving chip yield and equipment lifespan.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/a/d/Thermal , -Vacuum-Cleaning-System.html

Minimum Order: 1 bags

The FHDC-21AA-XX serires Armored 8K Fiber Optic HDMI 2.1 Active Optical Cables are supplied with protective caps and optional portable Roxtone PCD 235 & PCD 310 drum. They are ideal alternative replacement for #Klotz FOAUHW, #Kramer CRS- PlugNView,#TechLogix Networx MOFO-HD20ST, #Tripplite #Eaton P568FA series Armored High-Speed Optical HDMI Cable on portable but unbreakable drum reel. Crafted with high-quality hybrid optical fiber cable (4 Fiber & 7 Copper), the 8K Fiber Optic HDMI 2.1 Active Optical Fiber Cables are designed to extend the transmission distance between data source and display devices with a maximum length of 150 meters, which offer unmatched transmission capabilities with a maximum data rate of 48Gbps. These Fiber Optic HDMI 2.1 AOC cables deliver Ultra High Speed performance, ensuring pristine visual quality with resolutions up to UHD 8K/60p and 4K/120p. Highlight Features: Ideal replacement: for Klotz FOAUHW,Kramer CRS-PlugNView,TechLogix Networx MOFO- HD20ST,Tripplite #Eaton P568FA series Retractable & Extremely Durable Design: Durable Aluminum/Steel Construction for less than 25 Lbs; Stackable Frame Design; Protection Caps Included; Compliant with HDMI 1.4, 2.0 and 2.1 specification; High Resolution: Supports UHD 8K/60p and 4K/120p 4:4:4 video signals up to 150 meters for a high-quality viewing experience; High Bandwidth: 48Gbps capacity, ensuring fast and reliable transmission of multimedia content Lossless Transmission: Delivers 8K/60p and 4K/120p visuals, VR, and 3D display signals over long distances Fast Refresh Rate: 60Hz at 8K UHD resolution for crisp, sharp images; higher rates at lower resolutions Dynamic HDR: Optimizes contrast, depth, brightness, and color gamut on a frame-by- frame basis Enhanced eARC: Simplifies connectivity and audio optimization for multiple components High-Quality Audio: Supports up to 192kHz, 24-bit, uncompressed 5.1 and 7.1, Dolby lossless formats, and 32-channel audio VRR for Gaming: Fluid gameplay with minimal lag, judder, and frame tearing Advanced Features: Supports EDID, self-detecting function, ALLM, QMS, and QFT Durable Construction: Zinc-alloy housing, corrosion-resistant gold-plated connectors EMI Resistance: High resistance to electromagnetic interference, ensuring a safe, radiation-free environment Customizable: Up to 150m maximum length (30m max for eARC), custom length, logo, and packaging available

Minimum Order: 10 long tons

temperature humidity chamber is used to simulate the combination of temperature and humidity of the product in a climatic environment (high and low temperature operation, storage, temperature cycling, high temperature and high humidity, low temperature and low humidity, dew testing, etc.). Suitable for aerospace products, information electronic instruments, materials, electrical, electronic products, all kinds of electronic components at high and low temperatures to test their performance indicators.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Features: < , br>1.Monolithic structure with inner walls formed by special rolling technology and seamless TIG welding, ensuring an aesthetically sleek design. The door lock employs a 2.-driven opening mechanism. 3.Chinese-language color LCD touchscreen HMI paired with a high-performance programmable logic controller (PLC) and custom-developed software by Hardy Test Chambers, offering automated, intelligent, and user-friendly control. 4.Control modes: Constant operation mode, program operation mode. 5.TEST EQ patented "Cold and heat balance technology” reduces energy consumption by over 30% during low-temperature stabilization. 6.Refrigeration compressors and critical components sourced from internationally and domestically renowned brands ensure long-term reliability. Uses eco-friendly refrigerants compliant with international environmental conventions. 7.Humidification system incorporates TEST EQ patented technology. 8.Equipped with an RJ45 communication interface and remote control system (supports Modbus/OPC protocols for open data transmission). 9.Exterior finished with electrostatic powder coating; body in "TEST EQ White" and door in "TEST EQ Blue." 10.TEST EQ patented Cold Well Adsorption Anti-Condensation Function (optional).

Minimum Order: 1 bags

Pressure deviation: Atmospheric pressure ~40KPa: ±1.8KPa; 40 kpa to 4KPa: ±4.5% 4KPa to 0.5KPa: ±0.1KPa Temperature range: B: -20℃ to 150℃ -40℃ to 150℃. Pressure range: Atmospheric pressure to 0.5KPa. Blood pressure reduction time: <45 minutes (normal pressure to 0.5KPa). Temperature fluctuation: ±0.5℃ (normal pressure, no-load) Temperature uniformity: <±2℃ (normal pressure, no-load) Temperature deviation: <±3℃ (normal pressure, no-load) Heating rate: 1.0-3.0℃/min. Cooling rate: 0.7-1.0℃/min It is mainly applied in fields such as aerospace industry, national defense research and development, and scientific research in universities and research institutes. It can be used to confirm the environmental adaptability and reliability tests of components, electrical and electronic components, instruments and meters, materials, complete machines and related products during storage, use and transportation under the single or combined effects of low pressure, high temperature, low temperature and damp heat.If you need more models about our test equipment, please reference our https://www.chamber- testing.com/

Minimum Order: 1 bags

The principle of the composite salt spray test chamber is to test the corrosion resistance of salt spray by simulating climatic conditions such as salt spray environment and hot and humid environment. The functions of the composite salt spray test chamber include: Salt spray system: Composed of a solvent tank, a variable-speed peristaltic pump, a pneumatic system, a foam tower, nozzles, etc., it is used to simulate a salt spray corrosion environment. 2. Drying system: Composed of a blower, air heater, diffusion plate, pipes, etc., it is used to simulate a drying environment. 3. Automatic water replenishment device: Ensures that the water level in the laboratory and pressure tank remains within a specific height range; 4. Programmable controller: Set functions such as salt spray, drying, and humidification. The sequence of these processes can be arranged arbitrarily and repeated in a cycle. 5. Spray method: Tower-type spray, with mist particles naturally settling and evenly distributed. Either periodic or continuous spray can be chosen. 6. Box body: Made of PVC board, it is corrosion-resistant, lightweight and has high strength.If you need more information about the models of our testing equipment. Please contact me.https://www.chamber-testing.com/ 7. Heating method: Direct heating method, fast heating speed, reduced standby time, temperature control, and low power consumption. The composite salt spray test chamber is used for product testing in industries such as aerospace, electronics, automobiles, chemicals, metals, and transportation. It helps improve product performance through test result data.

Minimum Order: 1 bags

Application blowing sand and dust test chamber is capacity of 1000 liters. Considering that some specimens are smaller, following the marketing demand and customer required that we designed and produced this small sand and dust chamber. Feature ASTM B117 chamber dust sand test chamber dust proof chamber is made for the simulation of dust and sand conditions. These sand and dust chamber used to test the exposure of test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal.Dust ingress test methods included IEC60529, ISO20653 and many others. The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.If you need more models about our test equipment, please reference our https://www.chamber-testing.com/ Blowing sand and dust test chamber door attached to the window, the door to the lower part of the electrical control area,Simulated sand dust of talc in the lower hopper of the test chamber. Use the of circulating fan and automatic jar will be blown into the upper network studio talcum powder through a 75 micron square hole,The test space form high density dust shape, test specimen. Technical Specifications Concentration: Adjustable 1–20 g/m³ (±0.5 g/m³ precision). Temperature Range: -30°C to +80°C (±2°C stability). Airflow Velocity: 1–20 m/s (variable for static/dynamic testing). Volume: 0.6 m³ (standard) to 2.5 m³ (custom), with reinforced acrylic observation windows. Test Duration:Programmable cycles (1–999 hours), IP5X/IP6X compliance modes.

Minimum Order: 1 bags