Offers to Sell

Bio-Con® auto dilution system is to mix various concentrated buffer solutions, including acid, alkali, salt, etc., with injection water online to prepare the required buffer solution. Different concentrations can be accurately prepared according to specific usage situations. The online dilution and preparation system can quickly achieve stable control parameters. It can also be integrated with the Bio-Pro® pilot & process chromatography system or Bio-TFF tangential flow filtration system as a whole, continuously completing the process of "preparation + chromatography or preparation + tangential flow filtration", overall control and data recording. The overall system is based on DCS+BATCH system control, which can achieve centralized management, centralized control, batch processing, and batch control of the system, with a higher degree of automation. The Difference Between Dilution And In-Line Dilution The Inline Dilution System is similar to the two-pump gradient mode and allows for buffer dilution within a certain range. However, given the solubility of the mother liquor, pH shift after dilution and other phenomena, the robustness of buffer formulation is limited in large-scale applications. The in-line conditioning system uses a single component mother liquor of acid system, base system, salt system, water and additive system to perform buffer formulation, simulating the traditional laboratory formulation mode, with corresponding pH and conductivity feedback adjustment added during the formulation process for improving buffer preparation stability. The in-line buffer configuration is a single-component buffer concentrate with high solubility and can therefore be diluted up to a hundred times, which allows the volume of the buffer tank to be reduced a hundred times and can really solve the efficiency of room utilisation in the dispensing room or between uses. It is possible to obtain an in-line buffer configuration system that has obvious advantages over in-line dilution systems in terms of scalability and adaptability, and at the same time provides a better solution for modern buffer preparation. The Need For In-Line Automatic Buffer Conditioning Systems Buffer preparation for chromatography and filtration steps in bioprocessing is a challenge in terms of providing timely buffer delivery, reproducibility, and good process economics. Traditionally, buffer preparation relies mostly on manual work, which is labour-intensive and makes it difficult to avoid human errors, such as inaccurate weighing or deviations in the dosing of injection water for dilution. In addition, the target buffer must pass various quality control tests before it can be used in production, resulting in long dispensing cycles. The tanks must also be thoroughly cleaned and validated if they are used for other liquids. Another issue that should not be overlooked is that these large dispensing and storage tanks take up a lot of money and plant space. We provide dilution system cleaning, dilution equipment, automated dilution machine, dilution control, dilution dispenser, etc. For more information about preparation of pharmaceutical buffer solution, please feel free to contact us!

Minimum Order: 1 bags

Bio-TFF tangential flow filtration tff system is an easy-to-use automatic ultrafiltration UF/DF system suitable for biopharmaceutical process development, pilot studies, and small-scale production. The benchtop tff system adopts innovative and intelligent design, which not only improves process performance, but also achieves extremely low minimum operating volume, maximum ultrafiltration concentration multiple, and optimal product recovery function. Features of Bio-tff filtration system 01. Hygienic design, compliant with GMP and ASME BPE requirements; 02. Use sanitary grade quaternary diaphragm pump or rotor pump, low shear force, low pulse; 03. Automatic TMP control, automatic concentration, equal volume filtration and other functions; 04. Equipped with a built-in integrity detection module, without the need for an external integrity detector; 05. Chinese and English operating system complies with the requirements of FDA 21 CFR Part 11; 06. Customization can be customized according to different customer requirements; 07. Provide a complete set of GMP verification documents and services. BIO-TFF TANGENTIAL FLOW FILTRATION SYSTEM SPECIFICATIONS Model No. Bio-TFF600 Bio-TFF1200 Bio-TFF2500 Bio-TFF4400 Bio-TFF9000 Bio-TFF20000 Circulating pump Sanitary quaternary diaphragm pump Sanitary rotor pump Pump rate（L/H） 6~600 10~1200 50-2500 150~5000 300~9000 600~20000 Filtration area（m2） 0.1~2.5 0.5~2.5 0.5~5 0.5~10 1~20 2~40 Pipeline 1/2"TC 3/4"TC 1"TC 1"TC 1½" TC 2" TC 3" TC pH range 0~14 CD range（mS/cm） 0.1uS/cm~300mS/cm Tubing materia SS316L(ASME BPE), Ra≦0.4µm Solvent mixing tank（L） Optional (20/30/50/100 and others) Fluid infusion pump Optional System pressure（bar） ≤6 Power 220/380VAC 50Hz Compressed air（bar） 5~7 For more information about tangential flow filtration system price and tangential flow filtration equipment, please feel free to contact us!

Minimum Order: 1 bags

Bio-Pro® pilot& industrial chromatography systems is suitable for pilot and large-scale production of biopharmaceutical purification processes. The automated chromatography systems is designed with integrated modules according to ASME BPE and GMP requirements, and can be configured in various ways according to customer specific usage requirements. The system can manually or automatically achieve processes such as balancing, sampling, rinsing, elution, automatic collection, clean in place, and can provide customers with verification documents that comply with GMP regulations. Features of Bio-Pro® Pilot & automated gas chromatography systems 01. High Quality with Stability Key components of the system adopt internationally renowned brands, which are stable and reliable; The pipeline design adopts ASME BPE standard, with inner wall electric polishing, Ra ≤ 0.4um, and automatic welding; Provide FDA or USP Class VI material certification for non-stainless steel materials in contact with the material liquid; All stainless steel materials in contact with the material have a serial number, serial number/furnace number to ensure traceability; The instrument adopts digital communication to overcome the problems caused by analog signals; The control software adopts self-developed software on the C # platform, which meets the requirements of FDA 21 CFR Part 11; Using a database to store data and having mature and reliable solutions to interface with various DCS systems; Provide complete GMP verification documents and services; Can achieve double-column position series-parallel connection. BIO-PRO® PILOT & PROCESS CHROMATOGRAPHY SYSTEM SPECIFICATION Model No. Bio-Pro 60 Bio-Pro 180 Bio-Pro 600 Bio-Pro 1200 Bio-Pro 2500 Bio-Pro 4400 Infusion pump High-accuracy constant-flow pump Sanitary quaternary diaphragm pump Flow range(L/h) 1~60 1~180 6~600 10~1200 50-2500 150~5000 Flow accuracy(L/h) 1% or 5ml/min 1% or 0.5L/h 1% or 1.5L/h 1% or 3L/h 1% or 5L/h 1% or 10L/h Tubing 1/4"TC (OD6.35 X ID4.57) 3/8"TC (OD9.53 X ID7.75) 1/2"TC (OD12.7 X ID9.4) 3/4"TC (OD19.05 X ID15.75) 1"TC (OD 25.4 X ID 22.1) 1½" TC (OD38.1 X ID34.8) Tubing material SS 316L(ASME BPE)， Electro polishing Ra≤0.4um System pressure(bar) 6 UV-Vis Detector(nm) Fixed wavelength 280nm / adjustable wavelength with 4 channels 200-400/200-800nm Conductivity range 0.1uS/cm~300mS/cm（ 0.1uS / cm~500mS / cm ） pH range 0~14 Working temperature 4~40 ℃ Compression air(bar) 5~7 Size(mm) 1400x750x1300/ 1100*700*1200 1370x700x1200 1470x750x1350 1470x750x1350 1800x1200x1800 Weight(kg) 265 /220 230 280 295 630 700

Minimum Order: 1 bags

Biopharm purification equipment independently developed by Hanbon includes Chromatography columns, Chromatography system, In-line buffer dilution system, Filtration system, Single-use system, etc. The device software meets the requirements of GLP/GMP regulations and FDA 21CFR part 11 requirements and has a complete IQ/OQ/PQ verification file system that can provide document support for user GMP/FDA certification. Basic Characteristics Of Chromatography Resins Resin matrix: the finer and more uniform the particle size, the higher the resolution, but also the higher the backpressure (with the exception of the Source matrix); Physical stability: new generation resins are more robust and can withstand high flow rates while maintaining a stable column bed volume and structure, eliminating the need for frequent column loading operations and improving reproducibility; hemical stability: the new generation of resins can withstand extreme pH, high salinity, pro-solvents and organic solvents, facilitating the development of separation conditions and in-situ cleaning (CIP), greatly extending resin life and improving reproducibility. Different packing materials can be used for different sample separations, requiring different columns and systems to be used with them. Application Of Chromatography And Filtration Techniques In Vaccine Purification Antibody drugs (mono-, di-, poly-, and ADCs) are novel therapeutics with high efficiency, low toxicity, and low side effects, and are widely used in cancer, autoimmune diseases, infectious diseases, and other fields. Antibody-drug purification protocols need to be optimized and adjusted according to specific antibody types and requirements, and downstream links usually include the following steps: Cell harvesting and fragmentation Affinity chromatography Ion exchange chromatography Size exclusion chromatography Regeneration and concentration Hanbon's chromatography systems, filtration systems, in-line dosing systems, and other products are inextricably linked to the separation and purification of antibody drugs and are essential tools for the preparation of high-quality antibody drugs, both in the process development and production stages. Application Of Chromatography And Filtration Techniques In Antibody Purification Vaccines are an effective means of preventing infectious diseases. In the process of vaccine preparation, viruses or bacteria need to be produced first by cell culture, etc., and then inactivated and lysed to obtain the vaccine stock solution. Next, the vaccine stock solution needs to be isolated and purified to obtain a high-purity vaccine product. In this biopharma purification process, Hanbon's chromatography system and ultrafiltration system can be used to separate and purify the target proteins in the vaccine stock solution to obtain a high-purity vaccine product. Specifically, affinity chromatography, ion exchange chromatography, and gel chromatography can be used to remove impurities from the vaccine raw material solution to obtain high purity vaccine products. For more information about biopharma downstream processing, please feel free to contact us!

Minimum Order: 1 bags

FRAME FACT 11m carbon chassis and rear-end, S-Sizing Enduro Race Geometry, SWAT™ Door integration, threaded BB, internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 170mm of travel SEAT BINDER Alloy, 38.6mm REAR SHOCK FOX FLOAT X2 Factory, Rx Trail Tune, 2-position adjustment, high and low speed rebound and compression adjust, Trunnion mount, 205x60mm

Minimum Order: 1 bags

Frame Advanced-Grade Composite front and rear triangles, 100mm FlexPoint Pro suspension, 12x148mm thru-axle Headset NA Front Suspension RockShox Sid, 110mm, Boost 15x110, 44mm offset, remote lockout, custom tuned for Giant Front Suspension Travel 110 Shock Fox Float DPS Performance, 165/45, custom tuned for Giant Rear Suspension Travel 100 Hub Spacing Front: 110mm Boost; Rear: 148mm Boost Hubs [F] Giant MTB alloy, 6-bolt, [R] Giant MTB alloy, 3-pawl driver, 6- bolt Rims Giant XCR 2 29 Carbon WheelSystem Spokes Sapim Inflation Type Tubeless Tyres Maxxis Recon Race 29x2.4, foldable, TLR, EXO, tubeless Brakeset Shimano Deore MT410, hydraulic, Shimano RT-26 rotors [F]180mm, [R]160mm w/brakelevers Shimano Deore MT401 Shifters Shimano Deore SL-M6100, 1x12 Rear Derailleur Shimano Deore RD-M6100 Crankset Praxis Cadet, 32t, 55mm chainline S:170mm, M:175mm, L:175mm, XL:175mm Bottom Bracket Shimano, press fit Cassette Shimano Deore M6100, 10x51 Chain KMC X-12 Pedals Not Included Saddle Fi'zi:k Antares R7 with S-alloy rails Seatpost Giant Contact Switch dropper, remote S: 125mm travel / 30.9 x 395mm Stem Giant Contact SL XC, 35mm S:60mm, M:70mm, L:70mm, XL:70mm Handlebar Giant Contact XC Flat, composite, 760x35mm Grips Giant XC Pro S:32mm, M:32mm, L:34mm, XL:34mm

Minimum Order: 1 bags

Frame: SPIRE DISC Frame material: Carbon Wheel size: 28" Fork: RADON SPIRE DISC Full Carbon Brakes: Shimano 105 BR-R7070, flat mount Brake discs: Shimano SM-RT54, 160/160mm, center-lock Headset: VP, IS42/IS52 Stem: Newmen Evolution 318.4, Ø31.8mm (48cm: 90mm, 51cm: 100mm, 54cm: 100mm, 57cm: 100mm, 60cm: 110mm, 63cm: 120mm) Handlebar: Newmen Evolution Wing Bar, Ø31.8mm (48cm: 400mm, 51cm: 400mm, 54cm: 420mm, 57cm: 420mm, 60cm: 440mm, 63cm: 460mm) Saddle: Selle Italia Model X Superflow Seatpost: Newmen Evolution, 27.2 x 350mm Crankset: Shimano 105 FC-R7000, 50/34T (48cm: 170mm, 51cm: 172,5mm, 54cm: 172,5mm, 57cm: 172,5mm, 60cm: 175mm, 63cm: 175mm) Bottom bracket: Shimano BB-RS500PB, Pressfit Rear derailleur: Shimano 105 RD-R7000-GS, 11-Speed Gear shifters: Shimano 105 ST-R7020, 2x11 Front derailleur: Shimano 105 FD-R7000, braze-on Cassette: Shimano 105 CS-HG700, 11-34 Chain: Shimano 105 CN-HG601 Tyres: Continental Grand Sport Race, foldable, 28" x 28mm Wheelset: Fulcrum Racing 400 DB, 100/142mm, Felgenhöhe: 34mm, Maulweite: 19mm Pedals: not included

Minimum Order: 1 bags

FRAME Teammachine SLR 01 Premium Carbon with Aerocore Design • ICS Technology, Stealth Cable Routing • Integrated Aerocore Bottle Cages • Stealth Dropout Design • TCC Race Compliance Level • PF86 Bottom Bracket • Integrated Seatpost Clamp • Flat Mount Disc FORK Teammachine SLR 01 Premium Carbon • ICS Technology, Stealth Cable Routing • TCC Race Compliance Level • Stealth Dropout Design • Flat Mount Disc • 12x100mm Thru-Axle • 48mm Offset (Size 47-51), 43mm Offset (Size 54-61) GEARS 2x12 CHAINWHEEL SRAM FORCE AXS 48-35T CASSETTE SRAM FORCE XG-1270 10-28T CHAIN SRAM FORCE 12 Speed FRONT DERAILLEUR SRAM FORCE eTap AXS REAR DERAILLEUR SRAM FORCE eTap AXS SHIFTERS SRAM FORCE eTap AXS HRD BRAKES SRAM FORCE eTap AXS HRD, Centerline XR Rotors (160/160) HANDLEBAR BMC RAB 02, Ergo Top Shape, Compact Bend STEM BMC ICS2 - Integrated Cockpit Design SEATPOST Teammachine SLR 01 Premium Carbon D-Shaped Seatpost • 15mm Offset SADDLE Fizik Argo Vento R5 (140mm) HUBS CRD-351 SL RIMS CRD-351 SL Carbon, Tubeless Ready, 35mm TIRES Vittoria Corsa, 25mm TIRE CLEARANCE 30mm (Measured Width) EXTRAS Aerocore Bottle Cages

Minimum Order: 1 bags

FRAME URS Premium Carbon with Micro Travel Technology, Tuned Compliance Concept Gravel • Gravel+ Geometry • Internal Cable Routing • Fender and Rack Mounts • PF86 Bottom Bracket • Flat Mount Disc • 12x142mm Thru-Axle FORK Micro Travel Technology Suspension Fork, Premium Carbon Blades, • 20mm Travel • Coil Spring & Hydraulic Damper • Fender Mounts • Flat Mount Disc • 12x100mm Thru-Axle CHAINWHEEL SRAM FORCE 1 AXS 38T CASSETTE SRAM XG 1275 EAGLE 10-52T CHAIN SRAM X01 Eagle REAR DERAILLEUR SRAM X01 EAGLE AXS SHIFTERS SRAM FORCE eTap AXS HRD BRAKES SRAM FORCE eTap AXS HRD, Centerline X Rotors (180/160) HANDLEBAR Easton EA70 AX STEM BMC MSM02 SEATPOST URS 01 Premium Carbon D-Shaped Seatpost • 0mm Offset SADDLE WTB SL8 Titanium Medium HUBS CRD-400 RIMS CRD-400 Carbon, Tubeless Ready, 40mm TIRES WTB Raddler, 40mm TIRE CLEARANCE 45mm (Measured Width)

Minimum Order: 1 bags

Trough Deck Roof is a type of roof that is made up of a series of steel panels that are joined together to form a trough shape. The panels are typically corrugated to increase their strength and rigidity. The trough shape helps to prevent rainwater and other debris from accumulating on the roof and allows it to drain away easily. This type of roof is commonly used for tanks that are located in areas with high levels of rainfall. ADVANTAGES TROUGH DECK ROOF Offers excellent protection against weather elements, particularly rainwater. Provides a flat surface for maintenance activities on the roof. Can be used for larger tanks with a wide span. APPLICATIONS TROUGH DECK ROOF Used to store potable water and process water and other liquids. Used in a multitude of applications within municipal, industrial, and agricultural market sector applications. For more about flat roof tank and water tank china, Contact us.

Minimum Order: 1 bags

Tank Cone Roof is a type of roof that is shaped like a cone. It is typically made from steel and is bolted to the top of the tank shell. It is suitable for use with a variety of mixer types. It can be designed for use on pressurized structures and offer excellent resistance to corrosive process atmospheres. ADVANTAGES TANK CONE ROOF Simple and cost-effective design. Provides good protection against weather elements. Provide a suitable means to control the odor of tank contents. APPLICATIONS TANK CONE ROOF Tank cones can be used in a wide range of different market segments, from municipal potable water to industrial anaerobic digesters. As a internal floating roof manufacturer, we provide supported cone roof tank, self supporting cone roof, cone roof storage tank, conical roof tank, cone roof tank design, fixed cone roof tank, cone roof tank, bolted water tank, etc. For more, Contact us.

Minimum Order: 1 bags

oil tank roof and covers are critical components of storage tanks designed to protect the stored media from the elements while ensuring safe operation. Roofs and covers play a vital role in preventing evaporation and reducing product contamination. YHR offers a range of customizable options for our concrete water tank roof and covers to meet specific customer requirements, including access points, vapor and gas-tight seals, and additional safety features. Our roofing systems are ideal for a wide variety of applications, including chemical processing, water and wastewater treatment, and oil and gas production. TYPES OF TANK ROOFS AND COVERS Tank Cone Roof Tank Cone Roofs are sloped, conical roofs that provide structural stability to tanks while also preventing water from collecting on top of the roof. This type of roof is often made of steel and is commonly used for tanks storing liquids like petroleum, chemicals, and water. Geodesic Dome Tank Roof Geodesic Dome Tank Roofs, also known as aluminum geodesic domes or aluminum geodomes, are spherical, self-supporting structures made of aluminum struts that intersect to form triangles. They offer excellent protection against harsh environmental elements such as wind, snow, and rain, making them ideal for tanks containing hazardous chemicals or other sensitive materials. Trough Deck Roof Trough Deck Roofs are flat, horizontal roofs with a slight slope that allows for water runoff. These roofs are typically made of aluminum and feature a series of troughs and ridges that create extra strength and rigidity. Like Cone Roofs, they are commonly used for tanks storing liquids but are preferred for tanks that require frequent cleaning or inspection. As a internal floating roof manufacturer, we provide external floating roof storage tank, storage tank roof design, floating roof type storage tank, storage tank roof, floating roof oil storage tank, etc. For more, Contact us. There are many bolted tank manufacturers, but we are one of the best choices for you.

Minimum Order: 1 bags

Ground mounted biogas holder is a storage system that is used to collect and store biogas produced from organic waste in a biogas plant. The holder is mounted on the ground and is designed to withstand the pressure of the gas produced. They are an important component of biogas plants and play a crucial role in the efficient and effective management of biogas production. ADVANTAGES GROUND MOUNTED BIOGAS HOLDER Cost-effective and easy to install. Space-efficient and does not interfere with other plant components. Durable and low-maintenance, designed to withstand pressure and require minimal upkeep. APPLICATIONS GROUND MOUNTED BIOGAS HOLDER Widely used in various applications where biogas is produced as a byproduct of organic waste. Can be used in wastewater treatment facilities to store biogas produced during the treatment process. As a floating gas holder type biogas plant, we provide floating gas tank, floating fuel tank, floating gas holder, floating gas holder digester, etc. For in floating type biogas plant gas holder is made of. Contact us. There are many bolted tank companies, but we are one of the best choices for you.

Minimum Order: 1 bags

Glass fused to steel (GFS) tanks are a type of storage tank made from two materials: glass and steel. High strength TRS (titanium rich steel) plates and enamels are perfectly fused at high temperatures to form a highly inert inorganic glaze layer. This coating system has excellent anti-corrosion properties and is the best choice for tank and silo. TYPES OF GLASS FUSED TO STEEL BOLTED TANKS GFS-1500V Glass Fused To Steel Tanks GFS-1500V glass fused bolted steel tanks area high-quality, corrosion-resistant coating system for tanks and silos. It combines the strength of steel with the durability of glass, providing excellent protection against chemical and environmental factors. It is ideal for various applications, including seawater, liquid leachates and chemical industrial effluent etc. GFS-900V Glass Fused To Steel Tanks GFS-900V glass-fused-to-steel tanks are an economical option for those looking for a durable and corrosion-resistant storage tank. They are made of high- quality steel plates coated with a layer of glass enamel and are suitable for storing water, wastewater, and other liquids. USES OF GLASS FUSED TO STEEL TANKS Glass fused to steel water tanks have a wide range of uses in various industries such as water treatment plants, wastewater treatment plants, biogas plants, agriculture, food processing plants and many more. The excellent corrosion resistance, durability, and easy maintenance features make them suitable for storing and processing of various liquids, chemicals, and gases. They are also used for rainwater harvesting, firefighting, and storage of various industrial liquids. The modular design makes them easy to install and expand, and the various color options available make them aesthetically pleasing in any environment. GLASS FUSED TO STEEL BOLTED TANKS MANUFACTURING PROCESS Glass fused water tanks dopts high strength glass fused special steel as the base material, and uses the honing technology at high temperature of 800 degrees Celsius to fuse the anti-corrosion glaze layer with high inertia onto the surface of the base material to make standardized steel plate module. Compared with other tanks (Carbon Steel Welded Tank/Reinforced Concrete Tank), Glass-Fused-To-Steel Tank realizes breakthrough innovation in materials, anti- corrosion technology and installation mode, and is an advanced tank manufacturing technology. There are many glass fused to steel tank manufacturers, but we are one of the best choices for you. For more information about bolt together water tanks, please feel free to contact us!

Minimum Order: 1 bags