Offers to Sell

Product Nmae:4-Amino-3,5-dichloroacetophenone MF:C8H7Cl , 2NO MW:204.05 CAS:37148-48-4 Contact me for more details! Patrick Telegram/signal+852 55133352 wickr:patrickehk Email:patrick@hkunitedchem.com https://www. , hkunitedchem.com/

Minimum Order: 1 bags

Product Name:4-Amino-3,5-dichloro-alpha-bromoacetophenone< , br>MF:C8H6BrCl2NO MW:282.95 CAS:37148-47-3 37148-47-3/4-Amino-3,5-dichloro-alpha-bromoa , cetophenone Contact me for more details! Patrick Telegram/signal+852 55133352 wickr:patrickehk Email:patrick@hkunitedchem.com https://www. , hkunitedchem.com/

Minimum Order: 1 bags

Our product Widely used in lighting shows, concerts, weddings, events, shopping malls, entertainment and sports venues, schools, government, trade fairs, exhibitions, press conferences, conference rooms, airports, hotels, stations, stadiums and various places PH2 SMD led screen Pixel pitch: 2mm LED:1515 Drive mode: 1/32Scan Module size: 256×128mm PH2 SMD led screen Pixel pitch: 2mm Pixel configuration: SMD Brightness: over 800cd/㎡ Refresh rate: over 3840Hz Drive mode: 1/32Scan Module size: 256×128mm Cabinet size:512x512mm Customized Designs You may find the screen in various designs, and you may also get a customize the design, LED screen resolution, pixel pitch and brightness for your unique requirements. Standard Cabinet Dimension The ultra-lightweight die casting aluminum cabinet features quick-lock system that makes it easy to transport and install.

Product name: 1-BOC-4-(4-BROMO-PHENYLAMINO)-PIPERIDINE Other names: tert-butyl 4-(4-bromoanilino)piperidine-1-carboxylate CAS: 443998-65-0 Molecular formula: C16H23BrN2O2 Molecular weight: 355.27 EINCES: 202-303-5 Density: 1.336±0.06 g/cm3 Boiling point: 439.1±40.0 °C Appearance: white crystalline powder Application: 1-BOC-4-(4-BROMO-PHENYLAMINO)-PIPERIDINE is used as a pharmaceutical intermediate, an organic intermediate, it is a raw material, not a finished product, and usually requires subsequent steps to produce the final product. Is it possible to start with a sample? Yes, the regular packaging of 1-BOC-4-(4-BROMO-PHENYLAMINO)-PIPERIDINE is 1kg/package, but we also have sample packaging, before the official order, if you are not sure about the quality of the product, we can start cooperation from the sample , our goal is to provide you with products that meet your requirements. We believe that good products can stand the test. Welcome your inquiry at any time. Contact me for more details! Patrick Telegram/signal+852 55133352 wickr:patrickehk Email:patrick@hkunitedchem.com https://www. , hkunitedchem.com/

Minimum Order: 1 bags

PRODUCT DESCRIPTION New Original Factory Parts IC Chip EP1K50QI208-2 Integrated Circuit In Stock​ Altera® ACEX 1K devices provide a die-efficient, low-cost architecture by combining look-up table (LUT) architecture with EABs. LUT-based logic provides optimized performance and efficiency for data-path, register intensive, mathematical, or digital signal processing (DSP) designs, while EABs implement RAM, ROM, dual-port RAM, or first-in first-out (FIFO) functions. These elements make ACEX 1K suitable for complex logic functions and memory functions such as digital signal processing, wide data-path manipulation, data transformation and microcontrollers, as required in high-performance communications applications. Based on reconfigurable CMOS SRAM elements, the ACEX 1K architecture incorporates all features necessary to implement common gate array megafunctions, along with a high pin count to enable an effective interface with system components. The advanced process and the low voltage requirement of the 2.5-V core allow ACEX 1K devices to meet the requirements of low-cost, high-volume applications ranging from DSL modems to low-cost switches. Specifications Product Attribute Attribute Value Manufacturer: Intel Product Category: FPGA - Field Programmable Gate Array RoHS: N Series: ACEX 1K EP1K50 Number of Logic Elements: 2880 LE Number of I/Os: 147 I/O Supply Voltage - Min: 2.5 V Supply Voltage - Max: 2.5 V Minimum Operating Temperature: - 40 C Maximum Operating Temperature: + 85 C Mounting Style: SMD/SMT Package / Case: QFP-208 Packaging: Tray Brand: Intel / Altera Maximum Operating Frequency: 80 MHz Moisture Sensitive: Yes Number of Gates: 199000 Number of Logic Array Blocks - LABs: 360 LAB Operating Supply Current: 5 mA Operating Supply Voltage: 2.5 V Product Type: FPGA - Field Programmable Gate Array Subcategory: Programmable Logic ICs Total Memory: 40960 bit Tradename: ACEX 1K Part # Aliases: 972623 EP1K50QI208-2 Integrated Circuit Chips 0EP1K50QI208-2 Integrated Circuit Chips 1EP1K50QI208-2 Integrated Circuit Chips 2EP1K50QI208-2 Integrated Circuit Chips 3

Product Description Painter Felt Abdeckvlies Floor Protection Grey Painter Fleece Nonwoven Thick, heavy-duty felt plate for maximum protection of various surfaces. Prevents mechanical damage from debris, pressure load, rolling stock, etc. Due to the large size, even larger surfaces can be efficiently protected. Characteristics: 100% vapor permeable, so also suitable for damp surfaces, natural stone and parquet Easy to customize Very high protection against mechanical and point loads Reusable Virtually lint-free Dimensions: approx. 120 x 80cm. Thickness: approx 4mm. Technical Specifications Color Blend grey Material Recycled 15% cotton/ 85% synthetic fiber Sheet Size 100cm x 120cm Thickness App 4mm H.S code: 5603949019 Mechanical protection Wherever mechanical protection of the substrate is required, you can use it. This prevents repair costs and damage from rubble, wheelbarrows, scaffolding, ladders, construction stamps, etc. Both inside and outside. During installation work, it provides reliable protection against the sharp ends of pipes. This is especially important when it comes to sensitive floors that can be easily damaged. Think of design concrete, cast floors and parquet. Laying the felt plates Laying the felt plates is done quickly and efficiently. This right-angle felt plates are pressed to a thickness of no less than 4 millimeters. You can apply them tightly together. With scissors or knife you can easily cut them to size if needed. You can also connect them by taping the seams with a suitable tape. The felt plates can be used several times. You can take them individually after use or stack them on a pallet. Ready for the next project. Vapor-open Because It is 100% vapor-open, this product is suitable for application on floors that have not yet fully dried. The moisture can then escape from the floor while the surface is protected against dirt, debris, climbing materials and other mechanical damage. This prevents unnecessary waiting times during the execution of your work. As a rule of thumb: as soon as you can walk on the floor, you can get started. That is a big plus from construction to finishing phase. This makes it an ideal covering material for painters, plasterers, installers and interior builders. Packing Details : 1. Inner packing: Plastic core or paper core 2. Outer packing: carton box for small rolls, Corrugated papercraft paper, for jumbo rolls, water-proof film wrapped outside the pallet 3. Wooden boxes if necessary. Shipping Term: Shipping by: Air Freight, Sea Freight, Express Delivery (DHL, UPS, FedEx, TNT, EMS, etc) Shipping time: 1. Air shipping: around 3-7 working days 3. Sea: around 4 weeks to arrive (depending on destination port) Loading Port: Shanghai, Ningbo Port, China Delivery Details 7-30 days after confirming the order, the detail delivery date should be decided according to the order quantity. FAQ Q. Are you a manufacturer with your own factory, or a trading company with a strong factory relationship? A. We are a manufacturer with our own factory. Q. Do you have the whole production process? A. We have two blown film machine, printing machines, three coating machine, rewinding machine, three two cutting machine, one glue reaction kettle Q. Why choose you? A. We have the price advantage and quality assurance. Q. Why your prices are competitive? A. We have a complete set of production equipment (cost savings), we are close to Qingdao port (Save Freight Cost)

PRODUCT DESCRIPTION 1xxx Series Pure hot dipped galvanized aluminum coil 0.8mm Alloy Metal Aluminum Coil Folding Sheet Table 5000 series Represents the 5052.5005.5083.5A05 series. 5000 series aluminum plate belongs to the more commonly used alloy aluminum plate series, the main element is magnesium, and the magnesium content is between 3-5%. Also known as aluminum-magnesium alloy. The main features are low density, high tensile strength and high elongation. . It is also widely used in conventional industries. The processing technology is continuous casting and rolling, which belongs to the series of hot-rolled aluminum plates, so it can be deep- processed by oxidation. Specification Item Name 1xxx Series Pure Aluminum Coil 0.8mm Aluminum Coil Alloy Metal Aluminum Coil Folding Sheet Table Alloy Sheet Roll Standard JIS G3141, DIN 1623, EN 10130 Material 1050,1060,3003,3A21,5052,5005 , ,5083,5A05,6061,etc. Sheet Thickness 0.2-200mm available Certificate ISO:9001,SGS Lead time 10-15 working days Package Standard exporting packing Payment term T/T, L/C,Cash,Western Union acceptable Advantage One-stop purchase, competitive price, excellent service, OEM&ODM Cases 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 0 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 1 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 25005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 3 About us 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 4 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 5 5005 6061-T6 Pure Aluminum Sheet Metal Coil Hot Dipped Galvanized Folding Table 0.8mm 6 Jiangsu Shengyilu Metal Material Company.is experienced manufacturer trading verified supplier of stainless steel for over 10 years in China.Our factory is located in Wuxi City,Jiangsu Province.The company's products include ss sheets/plates,ss strips,ss pipe,ss coil,ss bar, In order to meeting different customer requirements of quality,our company keep long term cooperation with Famous brand Tisco, baosteel, posco etc.under 100ton regular goods,7-15 work days Max delivery.Skilled worker have at least 6 years of experience operating various machines.such as uncoilershearing/oil film drawing/laminating/laser cutting machine etc.Most of our sales has over 5 vears experience to help customer avoid trouble. If you are looking for professionalreliable company,we are the better one.Welcome to visit us. FAQ 01 WHAT KIND OF WORK DOES YOUR COMPANY DO? (1) Our company is a professional manufacture (2) We mainly produces stainless steel plate/pipe/coil round barsas well asaluminumplate/pipe/coil/bar 02 WHAT ARE THE ADVANTAGES OF YOUR COMPANY? (1) Prime quality and reasonable price (2) Wide excellent experiences with after-sale service (3) Every process will be checked by responsible QC which insures every products quality (4) Professional packing teams which keepevery packing safel (5) Trialorder can be done in one week (6) Samples can be provided as yourrequirements 03 WHAT IS YOUR TERMS OF PAYMENT? (1) Payment<=1000USD 100%in advance Payment>=1000USD,30% T/Tin advance,balance based on BLcopy or LC at sight (2) If you have another question please contact us as below 04 WHAT ABOUT YOUR PRICE? (1) Our price is very competitive because we are a factor Pls feel free to contact us if you are interested in our products 05 HOW LONG IS YOUR DELIVERY TIME? (1) Different products have different delivery time.The products will be delivered as soon as possible on the basis of the quality assurance.Usually the delivery timeis within15 days after we received your deposit

PRODUCT DESCRIPTION HDPE Smooth Textured Perforated Geocell CE Certificate Gravel Grids Paver Product Introduction Typical cellular confinement systems are geosynthetics made with ultrasonically welded high-density polyethylene (HDPE) strips or novel polymeric alloy (NPA)— and expanded on-site to form a honeycomb-like structure—and filled with sand, soil, rock, gravel or concrete Specifications Index Properties Test Method Units Values Material - - 100% Virgin HDPE Carbon Black content ASTM D 1603 % ≥1.5 Density ASTM D 1603 g/cm3 0.935-0.965 Sheet Thickness ± 3% ASTM D 5199 mm 1.5 Seam Peel Strength USACE GL-86-19 KN/m ≥14.2 Tensile strength at Yield ASTM D 1603 KN/m ≥22 Environmental stress crack resistance ASTM D 1603 hrs ≥5000 OIT oxidation induction time ASTM D 1603 min ≥150 Type GM330 GM356 GM400 GM432 GM445 GM500 GM660 GM712 Welding Distance(mm) ± 3% 330 356 400 432 445 500 660 712 Cell Depth(mm) ± 3% 50,75,100,150,200,250 Dimensions Expanded Cell Size (width×length) (mm) ± 3% 250 x 210 260 x 225 290 x 260 320 x 275 315 x 300 360 x 300 470 x 450 510 x 475 Expanded Cell numbers(width×length) 10 x 34 9 x 34 8 x 34 8 x 34 8 x 34 7 x 34 5 x 34 5 x 34 Expanded Section size (width×length) (m) ± 3% 2.50 x 7.14 2.34 x 7.65 2.32 x 8.84 2.56 x 9.35 2.52 x 10.2 2.52 x 11.22 2.35 x 15.3 2.55 x 16.15 Expanded Section Area (m2) ± 5% 17.85 17.9 20.5 23.94 25.7 28.74 35.95 41.18 Application Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 0 SOIL REINFORCEMETN Geomax®(Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. ♦ 50% reduction in roadbed thickness ♦ 70+ years service life ♦ 10 times the bearing capacity Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 1 SLOPE PROTECTION Geomax®(Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. ♦ Environmentally friendly ♦ Green vegetation planted on it ♦ Excellent drainage with a perforated surface Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 2 CHANNEL PROTECTION Geomax®(Geocell) delivers stability and protection of channels exposed to erosive conditions ranging from low to high flows, either intermittent or continuous. ♦ Prevent seepage and reduce water loss ♦ Resistance to higher velocity and continuous flows. ♦ Less costly, smaller aggregate (up to 10 times) for the same protection. Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 3 RETAINING WALLS Geomax®(Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. ♦ Naturally-Vegetated, Green Retaining Wall Systems ♦25-30% installation faster than MSE block walls. ♦ No heavy equipment required. HCNS Manufacture Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 4 Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 5 Our Certificates and HDPE Geocell Testing reports Smooth Textured Perforated HDPE Geocell Gravel Grids Paver CE Certificate 6

Fiber optic pressure sensor PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so as to eliminating the environment temperature influence, and get the accurate pressure measurement. The PT-01 is embedded in hydraulic structures, bedrock or installed in piezometric pipes, boreholes, dams, pipes and pressure vessels to measure water pressure of pores or liquid level, it can also be used for dam seepage and seepage pressure monitoring, pressure vessel measurement, oil, water, gas pressure measurement, water level monitoring. Features Of optical pressure sensor PT-01 High precision and reliability Intrinsically safe Wide measuring range Quasi-distributed measurement Built-in temperature compensation Application Of FBG Pressure Sensor PT-01 Pore water pressure, water table depth Dam seepage and seepage pressure Dangerous goods storage tank pressure Tunnel, underground building water level Slope, tailing reservoir groundwater level Specification Of FBG Pressure Sensor PT-01 Parameter Unit Value Center Wavelength nm 1460 ~ 1610 Range MPa 1 ~ 60 Resolution MPa 0.05% F.S. Accuracy MPa 0.5% F.S. Temperature Compensation -- Built-in Material -- Stainless steel or Inconel Dimension mm Φ26 x 137 Installation -- Bolted, Embedded Pigtail Length m Φ3mm armored cable, 1m at single end (dual fiber), or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 As one of the fiber optic sensing companies, AtGrating offers fiber optical switch, fiber bragg grating pressure sensor, fbg pressure sensor, fiber optic pressure, fiber bragg grating pressure sensor, fibre optic pressure, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Surface mounted optical strain gauge MS-02 is mainly used to monitor the stress and deformation of various structural surfaces. The sensor is packaged with high-performance stainless steel material, and is installed on the surface of the monitored object by gluing or spot welding without causing any damage to the surface of the measured object. Due to its small size and convenient installation, it is more suitable for small spaces and laboratories, and occasions where the object to be measured is not easily damaged. Features Of optical fibre strain gauge MS-02 l High precision, reliability, and stability l Minimal temperature drift l All-optical measurement, intrinsically safe l Long-term zero point stability l Easy to install Application Of FBG Strain Sensor MS-02 Surface strain measurement of steel structure Bridge structural health monitoring Surface strain measurement of polymer materials Pre-stressed load measurement Strain measurement of pipes and storage tanks Specification Of FBG Strain Sensor MS-02 Parameter Unit Value Center Wavelength nm 1460 ~ 1610 Range με ±1500 Resolution με 0.01% F.S. Accuracy με 0.1% F.S. Material -- Stainless steel Dimension mm 82(L) x 13(W) x 7(H) Installation -- Paste or welding Pigtail Length m Φ3mm armored cable, 1m at both ends, or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 The sensor accuracy does not contain error sources originating from the read- out equipment. AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic displacement sensor, fiber bragg grating pressure sensor, fiber optic sensing solutions, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Surface mounted FBG strain sensor MS-01/MST-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces. The external strain transmits the strain to the internal fiber grating through the sensor mounting base, and the high-precision fiber grating converts the sensed tiny strain into a sensitive optical wavelength, which is analyzed by an FBG interrogator. Features Of FBG Strain Sensor MS-01/MST-01 High precision, resolution, and stability Buit-in Temperature Compensation (MST-01) Anti-electromagnetic interference Long-term zero point stability Easy to set up distributed sensor network Easy to install and reusable Application Of FBG Strain Sensor MS-01/MST-01 lSuitable for strain monitoring of bridges, gas pipelines, etc lLarge steel structures such as transmission line towers, cranes, hoists lStrain monitoring of rail surface lSteel structure & concrete surface strain measurement Specification Of FBG Strain Sensor MS-01/MST-01 Parameter Unit Value MS-01 MST-01 Center Wavelength nm 1460 ~ 1610 Range με ±1500 Resolution με 0.01% F.S. Accuracy με 0.1% F.S. Temperature Compensation -- No Yes Material -- Stainless steel Dimension mm Φ12 x 126 Installation -- Welding Pigtail Length m Φ3mm armored cable, 1m at both ends, or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 The sensor accuracy does not contain error sources originating from the read- out equipment. AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic temperature sensor, fiber bragg grating pressure sensor, fiber optic sensing, fbg strain gauge, fiber optic strain gauge, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Embedded FBG strain sensor ES-01&EST-01 is specially used for the internal strain measurement of concrete, reinforced concrete or plastic materials, so as to observe the change of internal stress of the structure for a long time, conduct state analysis, and achieve the purpose of warning and object health status diagnosis. The sensor is small in size and easy to install. It is connected in series or in parallel, and it is easy to form a quasi-distributed sensor network. Features Of FBG Strain Sensor ES-01&EST-01 Anti-electromagnetic interference, lightning strike, corrosion resistance High measurement accuracy and reliability Built-in temperature compensation for EST-01 Easy to set up distributed sensor network Easy installation for long-term monitoring Application Of FBG Strain Sensor ES-01&EST-01 Health monitoring of civil engineering structures such as bridges, dams, tunnels, buildings, etc. Reinforced concrete stress and strain monitoring Transportation industry (rail, road, aerospace) Structural health monitoring of oil, gas pipelines and offshore oil platforms AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic sensor, fiber bragg grating pressure sensor, distributed strain sensing, fiber sensing, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Fiber Bragg gratings are very sensitive to stress and temperature. No matter whether the FBG is subjected to stress or the ambient temperature changes, it is reflected in the fiber grating that the grating pitch has changed, that is, the fiber grating sensor has corresponding strain. This means that when you want to use FBG strain sensors for accurate testing, you must consider whether the ambient temperature has changed, you must deduct the effect of temperature on the reflected wavelength from formula Strain(μɛ)=((λS-λS0）-（λT-λT0） *KT)/ , Ks, that is to say, let (λT-λT0)=0 or the value of (λT-λT0) is numerically known, this process is called FBG Temperature Compensation for Strain sensors. Types of FBG Strain Sensor FBG Strain Sensor MS-01/MST-01 Mountable Strain Sensor MS-01 made of stainless steel, the sensing part adopts elastic structure, and the mounting base is a separate component, which can be easily installed. FBG Strain Sensor MS-02 Mountable Strain Sensor MS-02 made of stainless steel, elastic structure of the sensing part fixes the optical fiber in the stainless steel plate in the form of non-glue, which can be used permanently. FBG Strain Sensor ES-01&EST-01 Embedded Strain Sensor ES-01 is used for strain detection of structural safety, such as the internal strain detection of concrete in bridges, reservoirs, dams, highway tunnels, and other buildings. FBG Strain Sensor MST-03 Mountable Strain Sensor MST-01 adopt the technology of temperature compensation, two FBG inside the housing, which can eliminate the influence of the temperature from strain monitoring. Principle and Method of Temperature Compensation for FBG Strain Sensor The best way for AtGrating to compensate the temperature for the FBG strain sensor is to inscribe double gratings in one fiber, and then package it into the FBG strain sensor with temperature compensation, one FBG is used to measure the strain, and the other is used to measure the strain. Since the strain FBG and temperature FBG are in the same temperature environment, the temperature value measured by temperature FBG can be regarded as the temperature of strain FBG. Hence we can deduct the influence of temperature on the reflected wavelength from formula Strain(μɛ)=((λS -λS0)-(λT-λT0)*KT)/Ks, so as to obtain an accurate strain change value. AtGrating is a professional supplier for optical fiber sensing. AtGrating offers bragg filters, fiber bragg grating pressure sensor, fbg sensing, bragg grating strain sensor, fiber strain sensor, optical strain sensor, fbg strain sensor, fiber bragg grating strain sensor, fiber optic strain sensor, optical fiber strain gauge, optical strain gauges, etc. For fiber optic strain gauge price or more information, please feel free to contact us!

Minimum Order: 10 long tons

10 Inch 1024*768 Hsd100ixn1-A10 Touch Screen Panel Lcd Display Tft Module HSD100IXN1-A10 is a 10.0 inch diagonal a-Si TFT-LCD display screen product, with an incorporated WLED lighting system, without backlight driver, without touch screen. Based on datasheet with version of Rev1.0 which was released out on 4 27 2010, HSD100IXN1-A10 supports display 1024(RGB)×768 (XGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 202.752(W)×152.064(H) mm, outline size of 215.5(W)×166.5(H) mm, viewing area size of 205.8(W)×155.1(H) mm, with surface treament of Antiglare, Hard coating (3H), net weight of 330g (Typ.). As a TN, Normally White, Transmissive LCM product, HSD100IXN1-A10 can provides 250 cd/m² display brightness 600:1 transimissive contrast ratio, 75/75/60/70 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 2.4/5.6(Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit gray scale signal for each dot, thus presenting a palette of 262K colors, also with performance of color gamut 60% (NTSC). This product adopted 3S11P WLED as it's backlight systerm which was placed as Edge light type (Bottom side) and have a working life time of 20K hours, external backlight driver is additionally needed. HSD100IXN1-A10 utilizes TTL (1 ch, 6-bit) as it's signal inputting systerm, which connected by 60 pins Connector with power supply voltage of 3.3/9.48/17/-7V (Typ.)(VCC/AVDD/VGH/VGL). It's typical vertical frame rate (Fv) is 60Hz. product details Module number HSD100IXN1-A10 Resolution 1024(RGB)×768, XGA, 128PPI Pixel Format RGB Vertical Stripe Display Area 202.752(W)×152.064(H) mm Bezel Opening 205.8(W)×155.1(H) mm Outline Size 215.5(W)×166.5(H) mm Surface Antiglare, Hard coating (3H) Brightness 250 cd/m² (Typ.) Contrast Ratio 600:1 (Typ.) (TM) Viewing Angle 75/75/60/70 (Typ.)(CR≥10) Display Mode TN, Normally White, Transmissive Best View on 6 o'clock Response Time 2.4/5.6(Typ.)(Tr/Td) Display Colors 262K 60% NTSC Lamp Type 3S11P WLED , 20K hours , Without Driver Signal Interface TTL (1 ch, 6-bit) , 60 pins Connector Environment Operating Temp.: -20 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C features The panel parameters displayed on this web page are entered by the electronic engineer of the company according to the specifications. Efforts have been made to reduce the errors, but the parameters are not fully correct. Please refer to the specifications! Hsd100ixn1-A10 TFT Color LCD Display 16:9 250cd/M2 Touch Screen Panel 15in 0 faq 1.Q: Which sizes is available for the LCD Display in your factory? A: Normally, we supply3.5“4.3”5“5.6” 7'' 8''9“ 10.1'' 10.2'' 13.3'' 14'' 15.6'' 18.5'' 21.5'' 23.6'' 24'' 27'' 32'' 43'' 49'' 55'' 65''. If customers need others size, we also supply such as 75'' 86''. 2.Q: Is the lcd display can make touch screen? A: Yes, normally we have 3 kinds of touch for options, IR touch, capacitive touch and resistive touch. 3.Q: If the customized do you support? A: Yes, we can do OEM and ODM. We can provide other accessories such as touch panel, control board, etc. of different sizes and types according to customers' requirements. 4.Q: How long is the delivery time? A: Normally about 5-15 working days for standard version. If customized product, need about 15-20 working days. 5.Q:How about the warranty? A: We supply one year warranty. 6.Q: What is the MOQ? A: We supply 1pcs MOQ for testing and qualification. 7.Q: What package do you have? A: Different kinds of package for options: Wooden case, Honey comb case, and Flight case.