 |
Post an Offer to Sell New here? Please subscribe to post trade leads. It's FREE! |
Offers to Sell
Home > Offers to Sell
| Summary of 5/10/24 0:45 GMT: | >> Show Compact View |
)
Small temperature-controlled vacuum thermal evaporation coating machine CY-1700X-SPC-2 can set the program and precisely control the temperature to change within the range of 200℃-1500℃. During the evaporation coating of the sample, the sample stage can be rotated to obtain a more uniform film. This model of small program temperature control evaporation coating machine has a wide range of applications, can prepare a variety of metal film and organic film, so it is widely used in the preparation of electrodes and the preparation of organic light-emitting LEDs. The compact size of the instrument saves laboratory space; it is easy to operate and adaptable to different materials, so it is widely used in laboratories of universities and research institutes. Features: 1. This equipment uses a quartz chamber for easy cleaning and sample placement; 2. The sample stage can be rotated, and the coating effect can be more uniform; 3. Using tungsten wire as the heat source, the maximum temperature can reach 1700℃, and it is equipped with a special alumina boat loading sample (only used below 1600℃, if the evaporation temperature is greater than 1600℃, the sample should be placed directly in the tungsten wire basket); 4. The device can be switched to the manual adjustment state. The thermocouple is not installed inside, and the output current is directly adjusted by the manual. The temperature of the heat source can reach 2000℃, which can meet the experimental requirements for carbon plating of the sample. 5. The inert gas can be introduced into the vacuum chamber to clean the chamber, or the reaction gas can be introduced to carry out the reaction evaporation coating. 6. The air inlet is equipped with a needle valve for regulating the intake air flow.
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
DIN 61 FDA Polyethylene Anti-Glug Drum Faucet Spigot Art No.:DIN 61 Plastic Pail Tap Material:PP,HDPE,LDPE Applicable Can Neck:61mm Applications:20/25/30/50/60L jerrycans with 61mm neck Packing:100PCS/CTN G/N Weight:5.6/5.1KGS Carton Size:36 x 35 x 31cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
Small Vacuum Thermal Evaporation Coating Machine for Glove Box CY-EVP180G-GLV This small thermal evaporator can be used for vacuum evaporation deposition coating and the coating current can reach up to 100A. This type of small evaporation coating instrument has a wide range of applications and can prepare various metal thin films and some non-metal thin films, so it is widely used in electrodes and organic light emitting LED preparation. The instrument has a small size and a miniaturized design, which can effectively save laboratory space. It is specially designed for use in a glove box; it is simple to operate and has strong adaptability to different materials, making it very suitable for laboratory purchases. Characteristics: 1. Quartz chamber, easy to clean and put in samples; 2. Tungsten wire basket or tungsten boat is the heating source, the highest temperature can reach 1700℃; 3. Inert gas can be introduced into the vacuum chamber to clean the chamber, or reactive gas can be introduced to perform reactive evaporation coating. 4. The air inlet is equipped with a needle valve to adjust the air flow. Technical parameter Supply voltage AC220V，60Hz Max power 1000W Sample stage Diameterφ60mm； Quartz chamber O.Dφ180mm x I.Dφ166mm x 100mm Evaporation source Tungsten basket/tungsten boat Max temperature 1700℃ Thermocouple B-type,working temperature 200℃~1500℃ Vacuum gauge Resistance type vacuum gauge Vacuum interface KF16 Inlet interface φ6.35mm Bite type fittings Vacuum pump No, the customer provides it Dimensions 330x250x580mm
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
DIN 51 Breather Drum Cap / Tap for Drums / Jerrycans Art No.:DIN 51 Plastic Pail Tap Material:PP,HDPE,LDPE Applicable Can Neck:51mm Applications:5/10/12L jerrycans with 51mm neck Packing:100PCS/CTN G/N Weight:6.3/5.8KGS Carton Size:36 x 35 x 31cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
36" 6-Wheel Low Profile Plastic Creeper Material:HDPE Color:Red < , br>Caster:PP+ PVC 2" x 6PCS Overall Size:92 x 41 x 9.5cm Bear Weight:135KGS Packing:Individual Packing G/N Weight:4.3/3.4KGS Carton Size:93 x 42 x 11CM Features:Economy -------------- , ---- 40" 6-Wheel Molded Plastic Creeper Material:HDPE Color:Red < , br>Caster:PP+ PVC 3" x 6PCS Overall Size:101 x 47.5 x 11.5cm Bear Weight:150KGS Packing:Individual Packing G/N Weight:6/5KGS Carton Size:103 x 50 x 10CM Features:Tool grooves included ------------------ 40" 6-Caster Low Profile Plastic Creeper with Light Material:HDPE Color:Red Caster:PP+ PVC 3" x 6PCS Overall Size:101 x 47.5 x 11.5cm Bear Weight:150KGS Packing:Individual Packing G/N Weight:6.7/5.7KGS Carton Size:103 x 50 x 10CM Features:A mulit-function light included ------------------ 44" 6-Caster Low Profile Plastic Car Repair Creeper Material:PP ( 100% new ) Color:Red Caster:PP+ PVC 3" x 6PCS Overall Size:112.8 x 55.3 x 11cm Bear Weight:200KGS Packing:Individual Packing G/N Weight:6.9/5.9KGS Carton Size:115 x 58 x 11.5CM Features:A mulit-function light available as requested ------------------ 48" , ; Large Wheel Low Profile Plastic Creeper Material:HDPE Color:Red < , br>Caster:PP+ PVC 3" x 6PCS Overall Size:119 x 60 x 12cm Bear Weight:200KGS Packing:Individual Packing G/N Weight:7.6/6.4KGS Carton Size:123 x 62 x 10CM Features:Oversized up to 48",confortable for good breath ------------------ 48" Large Wheel Low Profile Plastic Creeper With Light Material:HDPE Color:Red Caster:PP+ PVC 3" x 6PCS Overall Size:119 x 60 x 12cm Bear Weight:200KGS Packing:Individual Packing G/N Weight:7.6/6.4KGS Carton Size:123 x 62 x 10CM Features:Oversized up to 48",confortable for good breath
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
Aeroflow 71mm Dispensing Drum Lid with Tap for Containers Art No.:DIN 71 Plastic Pail Tap Material:PP,HDPE,LDPE Applicable Can Neck:71mm Applications:30/60L containers with 71mm neck Packing:100PCS/CTN G/N Weight:6.3/5.8KGS Carton Size:36 x 35 x 31cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
DIN 61 FDA Polyethylene Anti-Glug Drum Faucet Spigot Art No.:DIN 61 Plastic Pail Tap Material:PP,HDPE,LDPE Applicable Can Neck:61mm Applications:20/25/30/50/60L jerrycans with 61mm neck Packing:100PCS/CTN G/N Weight:5.6/5.1KGS Carton Size:36 x 35 x 31cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
This type of small plasma sputtering coating machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage. This equipment is equipped with a rotatable heating sample stage, which can improve the uniformity of the coating and the adhesion of the film.This small plasma sputtering instrument uses a PLC control system, all touch screen operation, easy to learn and use. The equipment is small in size and beautiful in appearance, making it the best choice for laboratory coating experiments. Technical parameter Sample stage size 100mm Distance from sample stage to target surface 20~35mm height adjustable Rotating speed 1~20rpm adjustable Heating temperature ≤500℃ Temperature control accuracy ±1℃ PID temperature control Plasma sputtering source 2 inches x3 water cooling Vacuum chamber Chamber size φ180mm x 210mm Observation window Omnidirectional visibility Chamber material High purity quartz Open method Top cover removable Upper and lower cover material 304 stainless steel Pumping port KF16 Intake port 1/4 inch ferrule connector DC power supplyx1 Output power Max. 150W Sputtering power 1200V Max. sputtering current 50mA Vacuum pump type Dual-stage rotary vane vacuum pump Pumping port KF16 Exhaust interface KF16 Pumping rate 1.1L/s（4m3/h） Ultimate vacuum ≥0.1Pa Vacuum measurement Resistance vacuum gauge Power supply AC 220V 50Hz Total power 1.5kW/2kW Dimension 500mm x 320mm x470mm Weight 30kg
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
DIN 51 Breather Drum Cap / Tap for Drums / Jerrycans Art No.:DIN 51 Plastic Pail Tap Material:PP,HDPE,LDPE Applicable Can Neck:51mm Applications:5/10/12L jerrycans with 51mm neck Packing:100PCS/CTN G/N Weight:6.3/5.8KGS Carton Size:36 x 35 x 31cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
Small plasma sputtering coating machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low- temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage. This small plasma sputtering coater uses PLC control system, all touch screen operation, easy to learn and use. This model machine is also equipped with a rotatable sample stage, which can effectively improve the uniformity of the coating. Technical paremater Sample stage size 100mm Distance from sample stage to target surface 20~35mm height adjustable Rotating speed 1~20rpm adjustable Plasma sputtering source 2 inches x3 Natural cooling Vacuum chamber size φ180mm x 210mm Observation window Omnidirectional visibility Chamber material High purity quartz Open method Top cover removable Upper and lower cover material 304 stainless steel Pumping port KF16 Intake port 1/4 inch ferrule connector DC power supplyx1 Output power Max. 150W Sputtering power 1200V Max. sputtering current 50mA Vacuum pump type Dual-stage rotary vane vacuum pump Pumping port KF16 Exhaust interface KF16 Pumping rate 1.1L/s（4m3/h） Ultimate vacuum ≥0.1Pa Vacuum measurement Resistance vacuum gauge Power supply AC 220V 50Hz Total power 1.5kW/2kW Dimension 500mm x 320mm x470mm Weight 30kg
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
3/4" BSP Polyethylene Drum Tap / PE Barrel Faucet Art No.:3/4" BSP Polyethylene Drum Faucet Material:PE ( Polyethylene ) Spout Dia:0.6" Bung Thread:3/4" Applications:Most Acids,Caustics and Oils Packing:250PCS/CTN G/N Weight:9.3/8.8KGS Carton Size:36 x 35 x 31cm Remarks:Nature color is available
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
This type of small plasma sputtering coating machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage. This small plasma sputtering instrument uses a PLC control system, all touch screen operation, easy to learn and use. The equipment is small in size and beautiful in appearance, making it the best choice for laboratory coating experiments. Technical parameter Sample stage size 100mm Distance from sample stage to target surface 20~35mm height adjustable Plasma sputtering source Quantity 2 inches x3 Cooling method Natural cooling Vacuum chamber Chamber size φ180mm x 210mm Observation window Omnidirectional visibility Chamber material High purity quartz Open method Top cover removable Upper and lower cover material 304 stainless steel Pumping port KF16 Intake port 1/4 inch ferrule connector DC power supplyx1 Output power Max. 150W Sputtering power 1200V Max. sputtering current 50mA Vacuum pump type Dual-stage rotary vane vacuum pump Pumping port KF16 Exhaust interface KF16 Pumping rate 1.1L/s（4m3/h） Ultimate vacuum ≥0.1Pa Vacuum measurement Resistance vacuum gauge Power supply AC 220V 50Hz Total power 1.5kW/2kW Dimension 500mm x 320mm x470mm Weight 30kg
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
2" BSP Polyethylene Drum Tap / PE Barrel Faucet Art No.:2" BSP Polyethylene Drum Faucet Material:PE ( Polyethylene ) Spout Dia:2" Bung Thread:2" Applications:Most Acids,Caustics and Oils Packing:50PCS/CTN G/N Weight:15/14KGS Carton Size:56 x 43 x 33cm
Minimum Order: 100
Phone:
Fax:
Email:
86-514-87955800
86-514-87850800
3/F,Foreign Trade Mansion.No.18,West Wenchang Road.Yangzhou,China
Yangzhou 225012
China
)
This type of small plasma sputtering coating machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage. This small plasma sputtering coater uses PLC control system, all touch screen operation, easy to learn and use. This model machine is also equipped with a rotatable sample stage, which can effectively improve the uniformity of the coating. Technical parameter Sample stage size 100mm Distance from sample stage to target surface 20~35mm height adjustable Rotating speed 1~20rpm adjustable Plasma sputtering source Quantity 2 inchesx2 Naturalcooling Vacuum chamber Chamber size φ180mm x 210mm Observation window Omnidirectional visibility Chamber material High purity quartz Open method Top cover removable Upper and lower cover material 304 stainless steel Pumping port KF16 Intake port 1/4 inch ferrule connector DC power supplyx1 Output power Max. 150W Sputtering power 1200V Max. sputtering current 50mA Vacuum pump type Dual-stage rotary vane vacuum pump Pumping port KF16 Exhaust interface KF16 Pumping rate 1.1L/s（4m3/h） Ultimate vacuum ≥0.1Pa Vacuum measurement Resistance vacuum gauge Power supply AC 220V 50Hz Total power 1.5kW/2kW Dimension 500mm x 320mm x470mm Weight 30kg
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
)
This type of small plasma sputtering coating machine adopts two-stage sputtering method, which is widely used for SEM sample preparation or metal coating experiment. Using low-temperature plasma sputtering process, there is no high temperature during the coating process, and it is not easy to produce thermal damage.This equipment is equipped with a rotatable heating sample stage, which can improve the uniformity of the coating and the adhesion of the film.This small plasma sputtering instrument uses a PLC control system, all touch screen operation, easy to learn and use. The equipment is small in size and beautiful in appearance, making it the best choice for laboratory coating experiments. Technical parameter Sample stage size 100mm Distance from sample stage to target surface 20~35mm height adjustable Rotating speed 1~20rpm adjustable Heating temperature ≤500℃ Temperature control accuracy ±1℃ PID temperature control Plasma sputtering source Quantity 2 inchesx2 Cooling method Natural cooling Vacuum chamber Chamber size φ180mm x 210mm Observation window Omnidirectional visibility Chamber material High purity quartz Open method Top cover removable Upper and lower cover material 304 stainless steel Pumping port KF16 Intake port 1/4 inch ferrule connector DC power supplyx1 Output power Max. 150W Sputtering power 1200V Max. sputtering current 50mA Vacuum pump type Dual-stage rotary vane vacuum pump Pumping port KF16 Exhaust interface KF16 Pumping rate 1.1L/s（4m3/h） Ultimate vacuum ≥0.1Pa Vacuum measurement Resistance vacuum gauge Power supply AC 220V 50Hz Total power 1.5kW/2kW Dimension 500mm x 320mm x470mm Weight 30kg
Minimum Order: 1 bags
Phone:
Fax:
Email:
+8637155199322
No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China
Zhengzhou 450000
China
SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
| Post an Offer to Sell |
| HomeOffers to BuyBusiness OpportunitiesCompany Profiles |
© 1996-2024 IMEXBB.com. All rights reserved.
 |
|