Offers to Sell

The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil. The flexible current sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. It is suitable for large current measuring. They combine the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of voltage output 100mV/kA. Models range from 1A to 100,000Arms with an accuracy of 1% of reading. Rated EN 61010, 600V CAT IV, 1000V CAT III. Low cost AC current measurement probe designed to plug into digital multimeters, oscilloscopes, power quality analysis and power or harmonic meters. The length of the flexible current sensor can be selected from 40cm to 100cm. Fits around large or small conductors. Capable of getting into tight or difficult spaces. Ideal for measuring AC current in a group of conductors. FEATURES  Flexible and light weights  Easy & quick installation in tight spaces  No danger from open-circuited secondary  No core saturation or damage if overloaded  Excellent linearity 0.2% for current measurement; Multi-size are available  GENERAL DATA  Ambient operating temperature: -30~+80°C  Ambient storage temperature: -40~+90°C  Standards safety：EN 61010-1, EN 61010-2-032, EN 61010-2-031, IEC60044-1, & IEC61869-2, 1000V CAT III APPLICATIONS  Power quality monitoring  Power meters  Smart logger  Energy sub-meters  Distributed measurement systems DMMs, oscilloscopes

Minimum Order: 3 bushels

pplications - Laser hair removal - Acne treatment - Photo rejuvenation - Skin whitening - Spider vein treatment - Pigmentation treatment - Tattoo removal - Carbon peeling - Wrinkle removal - Body lifting Working Principle Diode laser Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now. It is performed using gold standard 808nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse- per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire Dual- Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. IPL Intense Pulse Light("IPL") used broad spectrum of white light and with filters to marrow the spectrum to target specfic chromophores and structures. IPL is a non-invasive skin treatment that emits powerful bursts of light energy to treat unwanted hair, sun damaged skin, and wrinkles, etc. without damaging the surface of your skin, IPL systems use flash xenon lamps to emit micro pulses of light across a broad band of visible wavelengths. IPL work by using particular wavelengths of light that is called by melanin which colors the hair and brown skin and black. Since melanin absorbs light to be warm or hot, that the production of cells called melanocytes and melanin are denatured more produce more melanin. By using gentle pulses of light momentarily to create heat, IPL can permanently disable hair follicles, preventing hair follicles` future growth. The melanin in the hair (which gives it its colour) absorbs the light, which is then converted into heat. This heat is transferred to the growth cells surrounding the root of the hair, disabling them. By the IPL, pigments are Shattered and eliminated out of body via metabolism. At the same time,IPL also helps increase collagen production, which rejuvenates the skin leading to a more youthful, radiant, bright and few fine wrinkle skin. The light with long wavelength can pass through epidermis to the hair follicles deep underneath the skin. At the targeted area, IPL occurs heating to destroy follicles and hair structures leading to permanent hair removal. 1064&532nm Q-Switched Working Theory The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling. The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system. The 1064nm wavelength will shatters and removes the black and blue pigments while the 523nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue. Specialty of QM-230+ Independent power supply for each system. This well ensures each system has strong and stable energy.Inside structure is very reasonable and every line is clear. All the spare parts are fixed to metal shelf. * 3000W power supply for diode laser system * 2000W power supply for E-light (IPL E-light) system * 500W power supply for ND yag laser system

Minimum Order: 1 bags

Applications - Laser hair removal - Acne treatment - Photo rejuvenation - Skin whitening - Spider vein treatment - Pigmentation treatment - Tattoo removal - Carbon peeling - Wrinkle removal - Body lifting Specialty of QM-230 Independent power supply for each system. This well ensures each system has strong and stable energy.Inside structure is very reasonable and every line is clear. All the spare parts are fixed to metal shelf. * 3000W power supply for diode laser system * 2000W power supply for E-light (IPL E-light) system * 500W power supply for ND yag laser system * 100W power supply for RF system Spare parts we use * UK lamp, US laser bars * 8L big water tank with water level monitor * 2 Korea imported water filters * 4 Japan imported big fans + 2 big radiator * Latest brushless DC water pump with lift 15m * Pulse water switch to monitor water flow * Stainless steel board between connector and internal

Minimum Order: 1 bags

Application: 1.Epidermal pigment removal: Body tattoo, Eye line and brow tattoo. 2.Dermal pigment: Nevusof Ota ,birth mark, Coffee spot, Age spot,Freckle. 3.Vessels disease?: varicosity removal,capillary hemangioma. 4.Laser facial: oil control, skin rejuvenation,skin pore improvement. Picosecond Laser Description: The PicoSecond Laser uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with a great pressure, the melanin shatters into tiny dust-like particles. Because the particles are so small, they are more readily absorbed and eliminated by body. This can mean better clearance of the melanin and less treatments overall. PicoSecond Laser is a quick and easy non-surgical, non-invasive laser skin treatment for the body including. Advantages 1. High-Tech Picosecond laser machine used unique Honeycomb Focused technology to form a skin effect vacuolization,which can protect skin from damage during treatment. 2. Fast Effective Picosecond laser machine make tattoo & pigment removal treatment process from 5 to 10 times reduced to 2 to 4 times,greatly reduce the treatment and recovery time,with fast and obvious effective. 1).The arm is imported from Korea. 2).Flat top hat output mode:makes the spot more round. 3).Double lamps & bars. 4).Cellular type laser. 5).Energy: 1064nm/ 2000mj 532nm /800mj 755nm /1200mj

Minimum Order: 1 bags

Model:Hally III Applications 1.Non-ablative Laser Rejuvenation (NALR-1320nm) using carbon peel for skin rejuvenation 2.532nm: for treatment of epidermal pigmentation such as freckles, solar lentiges, epidermal melasma, etc. (mainly for red and brown pigmention) 3.1064nm: for treatment of tattoo removal, dermal pigmentation and treating certain pigmentary conditions such as Nevus of Ota and Hori's Nevus. (mainly for black and blue pigmention) Treatment 1.Wash blue, black embroider eyebrow 2.Wash coffee embroider eyebrow 3.wash red soal lip 4.Wash coloful tatoo 5.Remove freckle, age pigment 6.Remove nevus of Ota/Congenital-birthmark.. Working Theory: The PicoSecond Laser uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with a great pressure, the melanin shatters into tiny dust-like particles. Because the particles are so small, they are more readily absorbed and eliminated by the body. This can mean better clearance of the melanin and less treatments overall. PicoSecond Laser is a quick and easy non-surgical, non-invasive laser skin treatment for the body including chest or decollete, face, hands, legs, and more.

Minimum Order: 1 bags

Hally II Application: 1.Epidermal pigment removal: Body tattoo, Eye line and brow tattoo. 2.Dermal pigment: Nevusof Ota ,birth mark, Coffee spot, Age spot,Freckle. 3.Vessels disease?: varicosity removal,capillary hemangioma. 4.Laser facial: oil control, skin rejuvenation,skin pore improvement. Picosecond Laser Description: The PicoSecond Laser uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with a great pressure, the melanin shatters into tiny dust-like particles. Because the particles are so small, they are more readily absorbed and eliminated by body. This can mean better clearance of the melanin and less treatments overall. PicoSecond Laser is a quick and easy non-surgical, non-invasive laser skin treatment for the body including. Advantages 1. High-Tech Picosecond laser machine used unique Honeycomb Focused technology to form a skin effect vacuolization,which can protect skin from damage during treatment. 2. Fast Effective Picosecond laser machine make tattoo & pigment removal treatment process from 5 to 10 times reduced to 2 to 4 times,greatly reduce the treatment and recovery time,with fast and obvious effective. 1).The arm is imported from Korea. 2).Flat top hat output mode:makes the spot more round. 3).Double lamps & bars. 4).Cellular type laser. 5).Energy: 1064nm/ 1600mj 532nm /800mj 755nm /1200mj

Minimum Order: 1 bags

Absolutely! When it comes to beauty products, starting with the best raw materials is essential. Using high-quality ingredients ensures that the products are effective, safe, and deliver the desired results. Whether it's skincare, haircare, or makeup, using top-notch raw materials can make a significant difference in the overall quality of the product. High-quality raw materials often come from natural sources, such as plant extracts, essential oils, and minerals. These ingredients are carefully selected for their beneficial properties and are often rich in antioxidants, vitamins, and other nutrients that nourish and replenish the skin or hair. In addition to natural ingredients, advanced technologies and innovative processes are also used to extract and refine these raw materials. This ensures that the active components are preserved and delivered in their most potent form, maximizing their effectiveness. By starting with the best raw materials, beauty brands can create products that are not only effective but also gentle on the skin and environmentally friendly. It's a win-win situation for both consumers and the planet. So, next time you're choosing beauty products, pay attention to the raw materials used. Look for products that prioritize high-quality ingredients to achieve the best possible results for your beauty routine.

Minimum Order: 5 dozens

Hally I Applications: 1. Remove tattoo, eyeline,lipline 2. Remove pigment on scarfskin and derma 3. Remove moles, warts 4. Remove freckles, coffee spots, age spots 5. Remove Inflammatory pigmentation and so on Working Theory: 532nm 755nm 1064nm Picosecond Nd:YAG Laser Tattoo Removal Pigmentation Remove Beauty Machine The picosecond Nd:YAG laser allows us to treat a broader range of skin types and a wide array of tattoo ink colors.Creating a NewEra for skin rejuvenation. With the ultra-short picosecond pulse duration, there is less discomfort during treatment and fasterhealing. Professional and multicolored tattoos are cleared in far fewer treatment sessions than with conventional Q- switched lasers. The picosecond Laser tattoo removal machine uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with a great pressure ,the melanin shatters into tiny dust like particles. Then absorbed and eliminated by body .It is a quick and easynon-invasive laser skin treamtent for the body. Nd:Yag Picosecond Laser Remove Pigmentation Beauty Machine For Beauty Salon Use Formed By Pathological Changes Of Pigment Skin And Mixed Color, Dermis Spot, Fleck, Black Nevus, Age Pigmented, Birthmark And Nevus Of ota.

Minimum Order: 1 bags

Kaneko solenoid valve 2 way M30 SERIES Kaneko solenoid valve 2 WAY M20 SERIES Kaneko solenoid valve 3 way M00DU SERIES Kaneko solenoid valve 3 way M00U SERIES Kaneko solenoid valve 3 way M50 SERIES Kaneko solenoid valve 3 way M55 SERIES Kaneko Air - operated valve P15G SERIES Kaneko Air - operated valve BZ11 SERIES Kaneko Air - operated valve BZ10G SERIES Kaneko solenoid valve 4 way M65DG SERIES Kaneko solenoid valve 4 way M15DG SERIES Kaneko solenoid valve 4 way M65G SERIES single Kaneko solenoid valve 4 way M80G SERIES single Kaneko solenoid valve 4 way MB15G SERIES single Kaneko solenoid valve 4 way MT16G SERIES single Kaneko solenoid valve 4 way M15G SERIES single Kaneko solenoid valve 4 way MK15G SERIES single Kaneko solenoid valve manual reset M31 SERIES Kaneko solenoid valve manual reset M51 SERIES Kaneko solenoid valve manual reset M81 SERIES Kaneko solenoid valves manual reset M55 SERIES “KANEKO” Air Pilot Valve, 4-Way, Inlet ¾” Model P65G-20 Drawing No. CO-7203E “KANEKO” Air Actuator Valve, 3-Way Type BZ10D-33D-06 Drawing No.  CO-7202E M15DG-10-AE12PRS-M M15G-10-A12PG-TF , M20C-20-D12PG-03S-TF M00DU-8-A12PRS-M-TF MB15G-8-DE12PU  48VDC M00U-8N-A12PG-01-TF 120VA M15G-8N-12PG-TF 120VAC M00U-8-A12PG-01-TF AC120V  M30C-25-D44-SF12  DC24V DN25  ANSI150RF M30C-20-D44-SF12-TF M20C-25-D12PG- , 03S-TF DC24V M00U-8-A(D)12PG-TF  M00U-8-D12PG-01-T , F  DC125V M20C-20-D12PG-TF-03S DC110V M15G-10N , -D12PG-TF  DC110V M55C-25-DE12PU DC125V MOOU-8N-D12PG- , TF   MOOU-8N-DE12PUT     M15G-8N-D12PG-TF     M15G-10N-D12PG-TF   MOOU-8N-D12PG-TF

Minimum Order: 1 bags

2.Kaneko solenoid valve 2 way M22 SERIES Kaneko solenoid valve 2 way M30 SERIES Kaneko solenoid valve 2 WAY M20 SERIES Kaneko solenoid valve 3 way M00DU SERIES Kaneko solenoid valve 3 way M00U SERIES Kaneko solenoid valve 3 way M50 SERIES Kaneko solenoid valve 3 way M55 SERIES Kaneko Air - operated valve P15G SERIES Kaneko Air - operated valve BZ11 SERIES Kaneko Air - operated valve BZ10G SERIES Kaneko solenoid valve 4 way M65DG SERIES Kaneko solenoid valve 4 way M15DG SERIES Kaneko solenoid valve 4 way M65G SERIES single Kaneko solenoid valve 4 way M80G SERIES single Kaneko solenoid valve 4 way MB15G SERIES single Kaneko solenoid valve 4 way MT16G SERIES single Kaneko solenoid valve 4 way M15G SERIES single Kaneko solenoid valve 4 way MK15G SERIES single Kaneko solenoid valve manual reset M31 SERIES Kaneko solenoid valve manual reset M51 SERIES Kaneko solenoid valve manual reset M81 SERIES Kaneko solenoid valves manual reset M55 SERIES Kaneko Fuel Solenoid Valve Kaneko Petrol Solenoid Valve Kaneko Hydraulic Solenoid Valve Kaneko Steam Solenoid Valve Kaneko Gas Solenoid Valve Kaneko Motorized Solenoid Valve Kaneko Electric Solenoid Valve Kaneko Electronic Solenoid Valve Kaneko Micro Solenoid Valve Kaneko Wireless Solenoid Valve Kaneko Liquid Solenoid Valve Kaneko Fluid Solenoid Valve Kaneko Vacuum Solenoid Valve Kaneko Air Solenoid Valve Kaneko Electric Air Solenoid Valve Kaneko Magnetic Solenoid Valve Kaneko Automatic Solenoid Valve Kaneko Proportional Solenoid Valve Kaneko Miniature Solenoid Valve Kaneko Small Solenoid Valve Kaneko Water Solenoid Valve Kaneko High Pressure Solenoid Valve Kaneko Low Power Solenoid Valve Kaneko Low Voltage Solenoid Valve Kaneko Single Acting Solenoid Valve Kaneko Direct Acting Solenoid Valve Kaneko Double Acting Solenoid Valve Kaneko Explosion Proof Solenoid Valve Kaneko Latching Solenoid Valve Kaneko Cryogenic Solenoid Valve Kaneko Washing Machine Solenoid Valve Kaneko Ice Maker Solenoid Valve Kaneko Humidifier Solenoid Valve Kaneko Hot Water Solenoid Valve Kaneko Shower Solenoid Valve Kaneko Irrigation Solenoid Valve Kaneko Sprinkler Solenoid Valve Kaneko Aquarium Solenoid Valve Kaneko Compressed Natural Gas Solenoid Valve Kaneko Automotive Solenoid Valve Kaneko CO2 Solenoid Valve Kaneko Oxygen Solenoid Valve Kaneko Liquid Nitrogen Solenoid Valve Kaneko Submersible Solenoid Valve Kaneko Food Grade Solenoid Valve Kaneko Manifold Solenoid Valve Kaneko Orbit Solenoid Valve Kaneko PWM Solenoid Valve Kaneko Pulse Solenoid Valve Kaneko Dual Solenoid Valve Kaneko Bistable Solenoid Valve Kaneko Timed Solenoid Valve Kaneko Electromagnetic Solenoid Valve Kaneko NAMUR Solenoid Valve Kaneko 5V Solenoid Valve Kaneko 9V Solenoid Valve Kaneko 12 V Solenoid Valve Kaneko 12VDC Solenoid Valve Kaneko 24V Solenoid Valve Kaneko 24VAC Solenoid Valve Kaneko 24VDC Solenoid Valve Kaneko 240V Solenoid Valve Kaneko 2 way Solenoid Valve Kaneko 3 way Solenoid Valve Kaneko 4 way Solenoid Valve Kaneko 5/2 way Solenoid Valve Kaneko 5/3 way Solenoid Valve Kaneko 3 port Solenoid Valve Kaneko 5 port Solenoid Valve Kaneko 15 mm Solenoid Valve Kaneko 1 inch Solenoid Valve Kaneko 2 inch Solenoid Valve Kaneko 3 inch Solenoid Valve Kaneko 4 inch Solenoid Valve “KANEKO” Air Actuator Valve, 3-Way Type BZ10D-33D-06 Drawing No.  CO-7202E M15DG-10-AE12PRS-M M15G-10-A12PG-TF , M20C-20-D12PG-03S-TF M00DU-8-A12PRS-M-TF MB15G-8-DE12PU  48VDC M00U-8N-A12PG-01-TF 120VA M15G-8N-12PG-TF 120VAC M00U-8-A12PG-01-TF AC120V  M30C-25-D44-SF12  DC24V DN25  ANSI150RF M30C-20-D44-SF12-TF M20C-25-D12PG- , 03S-TF DC24V M00U-8-A(D)12PG-TF  M00U-8-D12PG-01-T , F  DC125V M20C-20-D12PG-TF-03S DC110V M15G-10N , -D12PG-TF  DC110V M55C-25-DE12PU DC125V MOOU-8N-D12PG- , TF   MOOU-8N-DE12PUT     M15G-8N-D12PG-TF     M15G-10N-D12PG-TF   MOOU-8N-D12PG-TF

Minimum Order: 1 bags

The GF302D1S portable three phase energy meter test system consists of an integrated 0.05% three-phase current and voltage source and a three-phase electronic reference standard meter of accuracy class 0.02. Characteristic features of the GF302D1S are its wide measuring range from 0 to 120A and 0 to 600V, high accuracy and high tolerance to unwanted external influences. The GF302D1S allows the monitoring of meter installations as well as analysis of the local mains conditions when it is as portable reference working standard. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7' touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test system can be programmable by PC, automatic generation of energy meter error test report. Specification Customized support: OBM Place of Origin: Beijing, China Brand Name: GFuve Model Number: GF302D1S Accuracy: 0.02%, 0.05% Power supply: One Phase AC 100-265V, frequency 50/60Hz. Voltage and Current Measuring range: 0-600V/1mA-120A Voltage error: ±0.02% (30V-600V) ±0.05% (0.1V-30V) Voltage and Current output range: 500V/120A Active power output accuracy: 0.05%RG Reactive power output accuracy: 0.1%RG Active power output stability: <0.01%RG/120s Reactive power output stability: <0.02%RG/120s Weight: 23 kg

Minimum Order: 1 bags

GF313V2 onsite portable three phase electronic meter test set is the newest product produced by our company by widely visiting users and referring to the advantages of the same kind of products home and abroad. The measured part of the product adopts high speed A/D transmission to send DSP to conduct digital processing, which largely improves measured degree of accuracy and stability. Central processing part adopts 32-bit ARM embedded technology to make instrument interface novel, function abundant, operation distinct and easy, and performance steady. Class of accuracy: Class 0.1, 0.2 or 0.5, range from 3×120A/3×600V or 3×200A/3×600V, with comfort design, small size and light weight. The model GF313V2 three phase meter meter test set is suit for metrological service of electricity power utilities, industrial and mining enterprises and electric lab to field use. Specification Customized support: OBM Place of Origin: Beijing, China Brand Name: GFuve Model Number: GF313V2 Accuracy: 0.1%, 0.2%, 0.5% Power supply: External power ;Phase voltage supply; Li-Battery supply Voltage range: 0-600V Voltage error: ±0.1%(30-600V); ±0.05%(30-600V) Active energy error: ±0.1%, ±0.2%, ±0.5% Reactive energy error: ±0.2% , ±0.5% Stability: 0.02%/minute Long term Stability: <100x 10E -6 /Year Dimension: 245x168x70 mm Weight: 1.8 kg

Minimum Order: 1 bags

INJECTOR GROUP-FUEL 387-9433 For Excavator Parts 3879433 10r7222 Used For Cat C9 Engine C9 injector 3879433 ,diesel fuel injector 10R7222 for C9 engine Product Name: Excavator INJECTOR GROUP-FUEL Model: CAT Quality:100% New/High Quality Part Number:387-9433 Availability: In Stock MOQ: 1PCS Warranty:1Year Condition:Best price Type:CAT C9 INJECTOR GROUP-FUEL 387-9433 Main Product:Electrical Parts Packaging: Carton Packing Delivery Terms: After got your payment Payment Terms:T/T,PayPal,Ali Pay,West Union Shipping Methods:DHL FEDEX EMS UPS or By Air,By Sea Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 0Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 1Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 2 1. All components are produced,tested and assembled based on original standard 2. All injectors are passed testing standard before shipping 3. Each injector has unique and True IMA (TRIM) code 4. Testing report is affordable for each injector Top quality 10R7222 diesel fuel injector for C9 excavator fuel injector part 10R7222 part number 10R7222 387-9433 3879433 model 12H, 330C, 330C FM, 330C L, 330C MH, 627G, 637D, 637G, 973C, C-9, D6R II, MTC735, TK711, TK721, TK722, TK732, TK741, TK751, TK752 brand HIDROJET place of origin China warranty 3 months delivery time fast(1-3days) packing size 29*17.5*8.5cm weight 2.5kg Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 3 Company Strength Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 4 Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 5Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 6Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 7Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 8 0445120177 OEM with IMA Code 6PC Fuel Injector Fits for QSB4.5L QSB6.7L ISB6.7L Engine 0445120177 5254261 Group Fuel 387-9433 Excavators Spares 3879433 10r7222 Injector For Cat C9 Engine 9 FAQ Q1: I want to buy your products, how can I pay? A :You can pay via T/T , L/C , WEST UNION , PAYPAL, which is guaranteed by Alibaba.com. It is safe and effective. Q2: How can you guarantee the quality? A: If you meet with quality problem, we promise to replace goods or return your funds. Q3: If we don’t find what we want on your website, what should we do? A: You can email us the descriptions and pictures of the products you need, we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample by express, we will develop this item for bulk purchasing. Q4: Can we buy 1 pc of each item for quality testing? A: Yes, we are glad to send 1pc for quality testing if we have the item you need in stock

Alumina Content: 92%,95% Applications: Steel Industry, Power Industry Ceramics, Mines And Lining Of Other Grinding Equipment. Application: All Types Machines With High Wear Resistance Damaged. 300×300 Alumina Ceramic Mosaic Tiles High Abrasion Resistance 300×300 Alumina Cramic Mosic Tiles Introduction There are all kinds of shapes for instance square shape, rectangle shape, trapezoid and some special shape. It is the ideal wear-resistant materials for wear resistant grinding equipment such as oil, chemical, mine, steel and electricity industry. It has advantages of various types, high hardness(Rockwell hardness is HRA80-90), excellent wear resistance, impact resistance, corrosion resistance, good heat resistance and light weight. It can save the maintain cost, extend the life of machines. Advantages High abrasion resistance and corrosion resistance Convenient handling of size and weight Excellent heat resistance property Excellent impact resistance property Easy and quick installation Lower production and maintenance cost Application Industry Equ , ipment system Equipment parts Cerment Pre-blending system for crashing limestone and crude fuel Chute, Bunker Raw mill system Feed chute, Bunker Cerment mill system Chute, Bunker Steel Sintered material transport system Hopper Coking system Coker hopper Thermal Coal Handling system Coal hopper,Coal feeder Port Transporting material system Bucket wheel machine’s disk and hopper, transfer point’s hopper, unloader’s hopper Smelting Transporting material system Measuring hopper, coke hopper, vibrating screen’s chute, Intermediate bin Batching system Batch hopper Burning system Ash bucket, hopper Chemical Transporting material system Hopper, Silo Coal Coal handling system Bucket wheel machine, coal hopper, coa feeder Mining Transporting material system Hopper Decoration design Floor decoration Floor Size Spec Length(mm) Width(mm) Thickness( , mm) Square shape 10--24 10--24 3--20 , Hexagon shape 12--20 12--20 3--15 , initpintu_ IMG_8680________________ , 1655188729(1)