Offers to Sell

Product Name: 500W Glass Single Crystalline Silicon Solar Panel Model No: SS-GSCP-500W30G42V13A020C Product Description: Maximum support 500W power output, glass monocrystalline silicon material, service life of more than 10 years, more than 90% power output, Within 25 years of use, the average power generation rate is more than 80%, an investment, permanent income! Application Description: Equipped with emergency backup battery, Used in villa, bank, hospital, warehouse, workshop, prison, border defense and other emergency power supply scenarios.

Minimum Order: 1 bags

Product Name: Explosion-proof CH4monitoring terminal Model No: SS-ENVIR-CH4WD4P Product Description: Industrial explosion-proof CH4gas detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places.

Minimum Order: 1 bags

Product Name: Vehicle Speed Capturing System Product Model: See The Following Table Product Description: Built-in high-precision detection radar, real-time display of vehicle speed, speed of speeding vehicles with red characters displayed, not speeding vehicle speed with green characters displayed, can be selected solar panel power supply, vehicle capture system, for speeding vehicles to capture vehicle pictures, assist traffic management personnel analysis. Application Description: Highways, military control areas, schools, private villa areas, to remind the speed of vehicles to reduce traffic accidents. Model No：SS-VEHICLE-220V3L10T2CH24G Technical Parameters: Product Type 220V power supply speed warning display system Product Description 220V power supply, real-time 2-lane vehicle speed, support 10 speed limit Settings, rover distance 1-250 meters Scope of application Highways, schools, hospitals, villas, and other locations that require speed warnings LED Screen 1.Resolution: 48*48 2.Size: 1100*600*70mm 3.Line: Top and bottom two lines 4.Power supply: 220V 5.Operating voltage: 12VDC 6.Power supply: 1.5A Radar 1.Transmission frequency: 24GHz 2.Transmit power: 6dBm 3.Power consumption: 0.5w 4.Sampling frequency: 25KHz 5.Response time: 20~200ms 6.Communication interface: RS485 7.Power supply voltage: 12V/DC 8.Detection distance: 1~250m 9.Speed range: 2~250Km/h 10.Speed accuracy: ±1Km/h Model No：SS-VEHICLE-SR3L10T4CH24 Technical Parameters: Product Type Solar powered speed warning display syste Product Description Solar powered, real-time 2-lane vehicle speed, support for 10 speed limit Settings, rover distance 1-250 meters Scope of application Highways, schools, hospitals, villas, and other locations that require speed warnings LED Screen 1.Resolution: 48*48 2.Size: 1100*600*70mm 3.Line: Top and bottom two lines 4.Power supply: 220V 5.Operating voltage: 12VDC 6.Power supply: 1.5A Radar 1.Transmission frequency: 24GHz 2.Transmit power: 6dBm 3.Power consumption: 0.5w 4.Sampling frequency: 25KHz 5.Response time: 20~200ms 6.Communication interface: RS485 7.Power supply voltage: 12V/DC 8.Detection distance: 1~250m 9.Speed range: 2~250Km/h 10.Speed accuracy: ±1Km/h Solar Energy 1.Peak power: 100W 2.Battery: 3*12mm 3.Size: 540*510*18mm 4.Lead-acid battery voltage: 12V 5.Lead-acid battery capacity: 120AH 6.Controller overdischarge protection voltage: 10.3±0.1V 7.Controller overcharge protection voltage: 14.5±0.1V 8.Power consumption during discharge operation: (3-4) ma 9.Power consumption after overdischarge protection: (1-2) ma Model No：SS-VEHICLE-220VSP3L10T2CH24 Technical Parameters: Product Type 220V power supply speed capture display system Product Description 220V power supply, real-time 2-lane vehicle speed, support 10 speed limit Settings, rover distance 1-250 meters, real-time capture of passing vehicles Scope of application Highways, schools, hospitals, villas, and other locations that require speed warnings LED Screen 1.Resolution: 48*48 2.Size: 1100*600*70mm 3.Line: Top and bottom two lines 4.Power supply: 220V 5.Operating voltage: 12VDC 6.Power supply: 1.5A Radar 1.Transmission frequency: 24GHz 2.Transmit power: 6dBm 3.Power consumption: 0.5w 4.Sampling frequency: 25KHz 5.Response time: 20~200ms 6.Communication interface: RS485 7.Power supply voltage: 12V/DC 8.Detection distance: 1~250m 9.Speed range: 2~250Km/h 10.Speed accuracy: ±1Km/h Snap Camera 1.Capture software: Built-in 2.Frame rate: 60fps 3.Lens: 25mm 4.Detection speed :120KM/H 5.Power supply mode: 12VDC 6.Operating temperature: -40°C ~ 70°C 7.Communication: RJ45

Product Name: Industrial Wired H2S Gas detector Model No: SS-ENVIR-H2SWD4P Product Description: Industrial explosion-proof H2S gas detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places. Model No:SS-ENVIR-H2SWD4P Product type Industrial grade explosion-proof hydrogen sulfide detector Product description Industrial grade hydrogen sulfide detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Scope of application With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high-quality hydrogen sulfide sensor, high accuracy, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.Automatic correction Technical parameter 1.Wide voltage: 24VDC(9-30VDC) 2.Detection range: 0-5000ppm range 3.Resolution: 1ppm 4.Gas production mode: natural diffusion 5.Linear error: ≤±2%

Product Name: Industrial Wired O2 Gas detector Model No: SS-ENVIR-O2WD4P Product Description: Industrial explosion-proof O2 gas detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places. Model No:SS-ENVIR-O2WD4P Product type Industrial grade explosion-proof oxygen detector Product description Industrial grade oxygen detector, can be used in flammable and explosive places using the standard modbus-rtu communication protocol, wired via RS485 transmission Scope of application With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high-quality oxygen sensor, high accuracy, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.Automatic correction Technical parameter 1.Wide voltage: 24VDC(9-30VDC) 2.Resolution: 0.1% 3.Detection range: 1-25% 4.Linear error: ≤±2% 5.Gas production mode: natural diffusion 6.Operating temperature: 0℃ ~ +50℃ 7.Working pressure: 86 ~ 106Kpa

Product Name: 4G Portable Wireless Intercom PTZ Camera Model No:SS-4GPTZ-2MP2TF1BT10H1MIC1GPS Product Description: Suitable for no network, no power supply, need to temporarily install video surveillance, continuous video connection with the back-end command center, intercom Application Description: Farm, desert, mountain, ocean, port, emergency repair site, earthquake rescue site, emergency disposal site, etc Key Feature: 1.Built-in 4G wireless communication module, to achieve no network high- definition video, voice transmission 2. Built-in large capacity lithium battery, support up to 8 hours of continuous power supply, to achieve no power area high-definition video, voice transmission 3. Built-in high sensitivity microphone to achieve clear voice and video simultaneous transmission 4. Built-in GPS module, back-end command center real-time positioning camera position 5. External metal handle, base, move the camera position at any time 6. Built-in HD zoom lens, support 100m distance object monitoring 7. Built-in dual TF card, single card supports up to 1TB storage, up to 1 month video storage 8. Support ONVIF protocol, private protocol, can connect with foreign mainstream video surveillance platforms

Minimum Order: 1 bags

Product name: Industrial Wired SO2 Gas detector Model No：SS-ENVIR-SO2WD4P Product Description: Industrial grade explosion-proof type sulfur dioxide detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places. Model No:SS-ENVIR-SO2WD4P Product type Industrial grade explosion-proof sulfur dioxide detector Product description Industrial grade sulfur dioxide detector, can use standard modbus-rtu communication, protocol in flammable and explosive places, via RS485 wired transmission Scope of application With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high-quality sulfur dioxide sensor, high precision, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.Automatic correction Technical Parameters 1.Linear error: ≤±2% 2.Gas production mode: natural diffusion 3.Operating temperature: 0℃ ~ +50℃ 4.Working pressure: 86 ~ 106Kpa 5.Wide voltage: 24VDC(9-30VDC) 6.Detection range: 0-1000ppm range 7.Resolution: 1ppm

Product Name: 5KW Energency Battery Inverter Product Description: Single-machine support 5000W AC inverter, Built-in lithium activation function,19-inch rack structure, easy to install and save space. With AC self-start function, can achieve 3 parallel expansion function. Application Description: Equipped with emergency backup battery, Used in villa, bank, hospital, warehouse, workshop, prison, border defense and other emergency power supply scenarios.

Minimum Order: 1 bags

Product Name: Industrial Wired Temperature detector Model No: SS-ENVIR-THWD4P Product Description: Industrial explosion-proof temperature detector, can use the standard modbus- rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places Product type Industrial grade explosion-proof temperature, temperature detector Product description Industrial grade temperature and humidity detector, can be used in flammable and explosive places using standard modbus-rtu communication protocol, via RS485 wired transmission Scope of application With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high quality temperature and humidity sensor, high precision, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.It comes with automatic zero correction function in the air to eliminate false alarms Technical parameter 1.Humidity range: 0%RH to 100%RH 2.Humidity measurement accuracy ±2%RH 3.Protection class: IP65 4.Aluminum explosion-proof housing 5.Wide voltage: 24VDC(9-30VDC) 6.Temperature range: -40℃~125℃ 7.Temperature measurement accuracy: ±0.2℃

Fiber Optical Vibration Monitoring System 【Product Description】Optical fiber vibration monitoring system is composed of optical fiber detection host, extension, vibration optical cable, alarm host, can adapt to the irregular area perimeter intrusion prevention application, can be installed wall, buried a variety of installation methods, has the advantages of anti-interference, concealability, low false alarm rate, long service life and so on.

Minimum Order: 1 bags

Product name: Industrial Wired Combustible Gas detector Model No：SS-ENVIR-CBS680WD4P Product Description: It is used to monitor whether flammable gas leaks in the industrial production process, whether there is a risk of gas combustion, and to prevent the occurrence of fire and explosion accidents. Industrial grade explosion- proof type sulfur dioxide detector, can use standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places. Product type Industrial Grade Explosion-Proof Wired Combustible Gas detector Product description It is used to monitor whether flammable gas leaks in the industrial production process, whether there is a risk of gas combustion, and to prevent the occurrence of fire and explosion accidents. Industrial grade explosion- proof type sulfur dioxide detector, can use standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Scope of application With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high-quality sulfur dioxide sensor, high precision, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.Automatic correction Technical Parameters 1.Types of combustible gases: H2, oxygen, natural gas, ethanol, propane, etc 2.Linear error: ≤±2% 3.Detection principle: Catalytic combustion 4.Operating temperature: 0℃ ~ +50℃ 5.Working pressure: 86 ~ 106Kpa 6.Wide voltage: 24VDC(9-30VDC) 7.Detection range: 0-100% 8.Resolution: 0.1%

Product Name: AI Video Analysis Box Product Description: Support 4CH/8CH/16CH/32CH IP Camera Input, Support face recognition, cross- border detection (line mixing detection), area intrusion detection (entering area detection, leaving area detection), number counting, wandering detection, vehicle detection, Compatible all CCTV IP Camera brand or Factory, Application Description: This product is suitable for upgrading several ordinary cameras into AI cameras. If you do not want to change the existing system architecture or replace the existing cameras, and at the same time, you need to specially customize the AI algorithm

Minimum Order: 1 bags

Product Name: Wired Distributed Optical Fiber Temperature Monitor Host Model No: SS-DSTTEMP-4CH25KM19UFC24VDC Product Description: The distributed optical fiber temperature measuring host developed and produced according to industrial design standards supports 4-channel optical fiber monitoring, the maximum support of a single channel is 25KM, provides high temperature point positioning, temperature alarm, 19U standard size, and supports rack installation. It can be matched with armor single mode optical fiber to realize long-distance temperature monitoring of oil, gas and high voltage lines. Suitable for field oil, gas, heating, high voltage lines and other long-distance temperature monitoring, for flammable and explosive areas, lines in advance temperature warning. Main Features: 1.Supports four channels of optical fiber temperature measurement. A single channel supports a maximum of 25KM 2.Comes with running, fault, fire status indicator, real-time monitoring status 3.19U standard dimensions for standard cabinets 4.Platform management software is optional, which supports centralized management of multiple hosts 5.Single-mode armored optical fiber access Application: Suitable for field oil pipelines, gas pipelines, heating pipelines, high voltage lines and other long-distance temperature monitoring, for flammable and explosive areas, lines in advance temperature warning. Realize long- distance oil, gas, high pressure line temperature monitoring.

Minimum Order: 1 bags

Product Name: Industrial Wired CO Gas detector Model No: SS-ENVIR-COWD4P Product Description: Industrial explosion-proof CO gas detector, can use the standard modbus-rtu communication protocol in flammable and explosive places, via RS485 wired transmission Main Application: All kinds of chemical, petroleum, medicine, military, experimental bases and other flammable and explosive places. Model No:SS-ENVIR-COWD4P Product type： Industrial grade explosion-proof methane detector Product description：Industrial grade methane detector, can be used in flammable and explosive places using standard modbus-rtu communication protocol, wired via RS485 transmission Scope of application： With explosion-proof function, can be used in explosive areas Functional characteristics 1.Built-in high-quality CO sensor, high accuracy, strong stability, low error rate 2.Industrial grade, support 24 hours of continuous online all year round 3.IP66 super high explosion-proof rating 4.Full range temperature compensation, long-term stability and reliability of measurement values 5.Automatic correction Technical parameter 1.Wide voltage: 24VDC(9-30VDC) 2.Detection range: 0-1000ppm 3.Resolution: 1ppm 4.Linear error: ≤±2% 5.Gas production mode: natural diffusion 6.Operating temperature: 0℃ ~ +50℃ 7.Working pressure: 86 ~ 106Kpa