Offers to Sell

The insulated centipede type ladder is named after shaped like a centipede,the characteristics are that this ladder is based on the straight rod as the center pillar, and the main mechanical load and insulating strength are carried with the insulated stretching rope,The parallel settings of the insulated crossbar are used as a ladder to run through the rod,they are mainly carry the weight of climbing staff.Compared with the ascending method of conventional live operations, the insulated centipede type ladder can adapt to a variety of terrain operations,it can solve the problems that the power-based operating vehicles and machinery cannot enter the operating area caused by inconvenient road traffic, such as the fields area,hillside area, grass area,etc.This ladder is not highly required for the geographical conditions of the operation site. The weight of this ladder is light, easy to carry, convenient operation.It’s expand the new way to board the power operation. The feature of the product： 1. The trunk is made of high-strength epoxy weaving and pulling insulated tube. It has good insulated performance, high strength, good rigidity and small offset under load. 2. The ladder pedal can be made of circular insulated tube or Reuleaux triangle insulated tube, good insulated performance, high mechanical strength, Reuleaux triangle insulated tube foot stepping on the contact surface, comfortable feet when climbing. 3. Insulated wind rope adopts insulated nylon rope or insulated silk rope, with good insulated performance and high stretch strength。 4. The structure design of the insulated centipede ladder is a segmented plug-in locking type, with a mounting base at the lower end to fix the rod body. Each section of the structure about 3M, and the foot pedal is fixed. It is equipped with a waterproof and moisture-proof insulated bag, which is easy to carry.。 5. This ladder can be equipped with insulated work platform, and staff can stand on the insulated work platform to work, which greatly improves the comfort of the operation。 6. The main insulated tube is yellow, and the ladder pedaling tube is fluorescent green or yellow。

Insulated hook ladder has many applications in high-voltage maintenance, which can position the line workers in the most advantageous working position and carry out line repairs in almost inaccessible places. All hooks are made of tempered steel with a diameter of 26mm and can rotate to best accommodate various angles on the structure. The steel chain is clamped onto the hook to help secure the ladder to the bracket. The crossbar material for both rated ladders is 32mm epoxy glass coated with a sand layer. Features 1. Designed to effectively, position linemen for high-voltage maintenance,make line repairs possible, even in inaccessible places 2. Hooks are formed from 26mm diameter tempered steel, these hooks can be swiveled to best various angles on structure 3. Ladders include hooks and steel chains, the steel chains clip to hooks to assist in securing ladder to support, rung material for both rated ladders are 32mm sand- coated Epoxy fiberglass rod,it has excellent anti slip performance. 4. Length can be customized.

Telescopic fiberglass ladders are widely used for city power line urgent repair ,Substation Inspection and other linemen works.It is the necessary tools for utility,company,hotel,family and so on. 1. The advantage of the telescopic fiberglass ladders Light weight, good insulation performance ,anti slip , corrosion resistant and small package which can put into the car. 3.Safety note: 1.Please inspect the ladder carefully with all the parts in the good condition. 2.Please make sure install the ladder on the hard and flat ground to preventing any dangerous caused by slanting. 3.Please be careful when you use the ladder in the windy day. 4.Please don’t put over weight on the ladder. 5.Please keep the stand on the middle of the ladder to avoid lost balance when you on the ladder. 6.Please don’t move the ladder when the person on it. 9.Please don’t put your hand on the steps when retract the ladder. 10.Please note only one person allowed on the ladder the same time. 11.Please stock the ladder in the dry,ventilate room .

Minimum Order: 1 bags

Main Character： 1.No special tools required for installation, no need crimping operation. 2.Automatic Splice is tension-dependent device that the line must have at least 10% of the rated breaking strength during installation to ensure reliable electrical connection. 3.The current passes through the wire to the metal crucible, flows through the metal crucible to pass the current to the outer casing, and the outer casing transmits the current to the metal crucible, which is transmitted from the metal crucible to the conductor. 4.The loop resistance of the Automatic Splice is not more than 1.1 times the loop resistance of the isometric conductor. The metal crucible can penetrate the residual oxide layer on the surface of the conductor ,so that electrical conductivity is Reliable.

Minimum Order: 1 bags

TID POWER Insulated bypass jumper adopts soft insulated conductor to pass through the support pipe of middle high strength epoxy insulated tube. The clamp design of both ends is suitable for glove operation and insulation rod operation. Insulated by-pass jumper is mainly used for 15kV by-pass operation when temporarily connected to the conductor.

Minimum Order: 1 bags

Insulated jumper wire set is used to bypass work areas during line upgrades and temporary or emergency repairs. 1. Compliant with: ASTM F2321 standard 2. When installing and removing jumper clamps, appropriate rubber insulation must be worn to clear the blockage.

Minimum Order: 1 bags

This 2 Printheads 60cm DTF Printer is Suitable for cotton T-shirts, hoodies, denim, canvas bags, caps, etc Product Features 1.Fast Speed Equipped with four 13200-A1 printheads, 6pass can produce 8㎡/hr at normal speed mode, and the maximum production can reach 12㎡/hr . 2.High precision The use of THK Japan imported guide rail with Japan NSK bearing, improve the accuracy of the car running, making the nozzle more accurate, more delicate details. 3.Stability Upgrade the flat slope heating front cover with intelligent linear temperature control system to ensure printing stability. 4.Easy to make layout Using PO-TRY RIP software, spot color channel can be generated by one key, no manual settings, color and brightness can be adjusted. In the field of textile printing for garments, footwear, hats, and bags, the 60cm DTF printer (Direct to Film, direct film heat transfer printer) has become the preferred equipment for small and medium-sized printing businesses and entrepreneurs due to its high precision, efficiency, and broad material adaptability. This article comprehensively analyzes the core advantages, technical parameters, purchasing considerations, and industry applications of the 60cm DTF printer to help you find the most suitable production equipment. Strong Applicability of Width With a print width of 60cm (approximately 24 inches), it perfectly fits the printing needs of common textiles such as T-shirts, hoodies, canvas bags, and hats. It also supports small format batch printing, improving material utilization.

Emphasizing detais and selecting high-quality materials to offer better output Fabric & Textile Sublimation Printer Features 1. Sealed S-shape Platform Ensure sufficient suction to keep paper-running smoothly. No scratching. No wrinkling. 2. Large Cartridge Secondary Ink Supply System 4.5L large capacity with eight 500ml secondary floating buffer cartridges. Ink- lacking alarming system detects from the ink level of the main cartridge. 3. Well Moisturizing Ink Stack Automatically intelligent printhead cleaning and moisturizing devices maintain long-last-ing sealed moisturizing effect. Two lifting methods, automatic lifting and manual lifting. 4. High-precision guide rollers with grooves Solve the problem of wrinkling on thin paper with 100mm in diameter. Fabric & Textile Sublimation Printer Looking for a high-performance sublimation printer for fabrics and textiles? Our Fabric Textile Sublimation Printers deliver vivid colors, sharp details, and long-lasting prints on polyester-based fabrics, sportswear, home textiles, and more. Whether you’re a garment manufacturer, promotional product supplier, or custom apparel business, our sublimation printers provide fast, cost- effective, and professional-grade results.

This type of sublimation digital printer Emphasized detais and selecting high- quality materials to offer better output Product Features 1. Japan THK Linear Motion Guides：Smooth and stable movement can increase life expectancy as well as reducing the resistance and undesired sound in the operation of the trolley 2. Self-locking Synchronous Wheel：Guaranteed uniform stepping accuracy and smaller errors. 3. Self-developed Printhead Arrangement：Fewer printheads with high speed and precision 4. Well Moisturizing Ink Stack：Automatically intelligent printhead cleaning and moisturizing devices maintain long-last-ing sealed moisturizing effect. Two lifting methods, automatic lifting and manual lifting. 5. Leisai Brushless Integrated Motor：High-precision linear decoding Less error in length More stable performance 6. Imported Rubber Paper Rollers：Anti-static function prevents ink-flying and ensures higher precision in printing size. The unique lifting device can automatically handle the phenomenon of paper drumming in the printing process.

liquid crystal monomer 52364-73-5 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Benefits you will get with EDS machines: Benefit A. Saving production time (Max cutting speed: 1800mm2/min) Benefit B. Saving tool cost (the electrode is cheaper: around 1.2USD/pcs) Benefit C. Saving material cost (the cutting gap is smaller: 1.5-2mm) I.The machine characteristics: (1)The machine utilizing anodic machining principle, cutting special steel that can’t be easily cut, such as high-temperature heat-resistant alloys, high chromium, high nickel alloy, titanium alloy. It can also cut steel rail. (2)The cutting efficiency is high, the maximum cutting speed is 1800mm2/min (3)Use steel as the electrode, the cost is rather lower (4)Cutting gap, ≤2mm, save precious steel II. Specification Model No. EDS350 EDS600 EDS1100 , Max. cutting diameter φ350mm φ600 mm φ1100 mm Max. workpiece width 810mm 1000mm 1100mm , Max. cutting travel 400mm 750mm 1200mm , Max. cutting length Unlimited Unlimited 50 , 0mm Worktable dimensions 800x2000mm 1800x900mm , 1200x2500mm Worktable moving travel 800mm 800mm 800mm & , lt; , br>Max cutting speed 1800mm2/min 1800mm2/min 1800mm2/min Max. worktable load 2500kg 3000kg 20000kg Electrode size 0.7～1.2(thickness)x25-40(W)x7420(L)& , lt; , br> 0.7~1.2(thickness)x25-40(W)x9550（L）& , lt; , br> , 0.7~1.2(thickness)x25-40(W)x9550（L） Cutting gap ≤2mm ≤2mm ≤2mm & , lt; , br>Electrode Material Steel steel steel Max. output current 500A 800A 1000A Controller German Siemens German Siemens German Siemens Feeding motor Japan Panasonic AC servo motor Japan Panasonic AC servo motor Japan Panasonic AC servo motor III. Introdution of Electrical Discharge Sawing machine. 1、Working theory The machine utilizing anodic machining principle, cutting special steel that can’t be easily cut, such as high-temperature heat-resistant alloys, high chromium, high nickel alloy, titanium alloy. And the electrode is the mild steel, which is running fast on the pulleys. The work piece is positioned on the worktable. And the mild steel electrode connects with the plus end of the power supply. And the work piece to the minus end of the electrical power supply. There is a flushing device which can supply sodium silicate solution (the coolant) to the cutting area. The electrical discharging happens continually between the mild steel and the work piece according to the drawing. 2、Simple description The machine is equipped with the main machine body, working liquid system and controller. 1) The main machine body The machine is gantry structure which is made up with the worktable parts, moving crossbeam and upright column the motorized electrode, etc. ⑴ Worktable The worktable is used for holding and adjusting the work piece. The worktable moves from point to point or continually, derived by the motor and couple and ball screw on the V guide way of the machine body. ⑵ Device of running the belt type steel electrode. This device has functions of running& guiding and controlling the tension of the belt type electrode steel and also the function of higher power supply feeding, and checking and protection of belt-breaking. The belt type steel electrode is running on the driving pulley and slave drive ones which are installed on the both holders of two ends of the crossbeam. The driving pulley is moved by the 3 phases motor and the slave drive pulley by hydraulic pressure. The belt type steel electrode is guided with two guiders in order to make sure the electrode is under good tension condition. And the belt type steel electrode tension can be adjusted by the hydraulic pressure. In case the belt type electrode breaks or the tension is weak, the alarm will appear at once and the machine will stop working too. The power supply feeds through the pulley, installed with the power feed brush, pulley axle and to the belt type steel electrode. The steel belt electrode is held by four sets of guiders in order to make the electrode running in the same surface of the work piece cross section and make the cutting gap as small as possible. There are flushing mouths on the guiders, which offer the working liquid to the cutting area. ⑶ Upright column and device of the motorized belt type steel electrode. The device of the motorized belt type steel electrode is moved by the A/C servo motor which drives the gear reducing mechanism with ball screw. So the belt type steel electrode can move to/away the work piece. The upright columns are installed the linear guide ways, which hold the device of the motorized belt type steel electrode. In order to make the device move flexibly and reduce the loading of the servo motor, there are the weight balance parts connected with the device of the steel electrode by a roller chain inside of the upright columns. The limited switches are installed on the device of the motorized electrode. And there is a traveling ruler near to the device for the operator to check the travel during working. 2、The system of working liquid The working liquid is taken to the flushing mouths by pump. And then it flushes to the work piece by the adjustable mouths and return to the collecting tank. The liquid after filter can be used repeatedly. The supplier will supply the way how to mix the working liquid and the installation floor plan. And the end user designs and builds the liquid tank and the collecting liquid path according to the floor plan and also the workshop area. 3、Electrical power supply and control ⑴machining electrical power supply The machine applies the special linear transform to exchange the 3 phases A/C electrical power into the lower voltage and high current working power supply. Main specification of the power supply: Input：3 Phases 380V 50Hz Output：32V～50V divided into adjustable 4 levels. Max machining current：500A/800A/1000A subject to different models. ⑵Controller system The machine applies the programmable PLC to control the running of all kinds of functions stable. The power units are 3 phases asynchronous motors expect the Panasonic A/C motor that drives the device of the belt type steel electrode. All motors return circuits are installed with the protecting switches to avoid the overloading. The system of the auto feeding steel electrode can inspect the discharging gap in real time, and it will adjust the feeding speed automatically according to the working situation in order to make the cutting under the stable and efficient condition.

Minimum Order: 1 bags

OPE (Oxidized Polyethylene) Wax is a versatile additive used in various industries. It acts as a lubricant, dispersant, and release agent, especially in plastic processing. OPE wax is commonly used in PVC, hot melt adhesives, paints, coatings, and textiles.  Plastic Processing:OPE wax is a popular lubricant in PVC products, helping to improve production efficiency and reduce costs. It's also used in PE, PVC cable materials, and PVC pipes.  Adhesives:OPE wax can enhance the bond strength and moisture resistance of hot melt adhesives.  Paints and Coatings:It can be used as a dispersant in water-based paints, improving gloss, smoothness, and scratch resistance.  Textiles:OPE wax can be used as a softener and anti-puncturing agent for textiles.  Other Applications:It's also used in car wax, leather auxiliaries, and as an internal dispersant in color processing.  Benefits:OPE wax can improve toughness, surface smoothness, and pass rates in plastic products. It also reduces power consumption during resin mixing and minimizes adhesion between resin and mold.  Key Properties:OPE wax has low viscosity, a high softening point, good thermal stability, and excellent external lubricity. 

W Vortex pump is a vane pump. W vortex pump is mainly composed of impeller, pump body and pump cover. Impeller is a disk, the circumference of the blade radial uniform arrangement. The pump body and impeller form a circular flow path, suction inlet and discharge outlet are in the outer circumference of the impeller. There is a clapboard between the suction inlet and the discharge outlet, thereby separating the suction inlet and the discharge outlet. USES: W single-stage direct-connect vortex pump is used for pumping water or other liquids in physical and chemical properties similar to water. Liquid temperature is less than 60. W vortex pump is commonly used in boiler feed water of form a complete set, in shipbuilding, textile, chemical, metallurgy, machinery manufacturing, aquaculture, fixed fire control voltage, heat exchange unit and remote sprinkler irrigation agriculture departments with the wide range of applications. W vortex pump is often used for boiler water supply, in shipbuilding, textile, chemical industry, metallurgy, machinery manufacturing, aquaculture, fixed fire pressure control, heat exchange unit, agricultural remote sprinkler irrigation and other departments . Features: 1. The characteristic curve of the vortex pump is similar to that of the centrifugal pump, but it is less efficient with small flow rate and large head. Vortex pump clearance (that is, the gap between the impeller and the cover plate) can not be too large, otherwise it will significantly reduce the efficiency, so this pump can only transfer relatively pure liquid. 2. The characteristics of small volume and light weight of vortex pump have great advantages in ship installation. 3. Self- suction ability or with the help of simple installation. 4. The head characteristic curve with steep drop, so it is not sensitive to pressure fluctuation in the system.

Minimum Order: 1 bags

ISGB detachable pipeline centrifugal pump: ISGB vertical circulation pump booster pipeline water pump is high-effective and energy-saving and easily disassembled It is used to transfer pure water and other liquids similar. ISGB Pump has the advantages of compact structure and small volume and stable running and easy assembly and maintenance. Pump shaft is provided with independent supporting point to ensure steady running and long performance life. ISGB Vertical pipeline centrifugal booster pump is very easy disassembly.(detachable type) Application: ISGB Series vertical booster centrifugal pump is widely used in industrial and cities’ water supply and drainage, high buildings’ booster water supply, gardens irrigation, fire fighting booster, remote water supply, warming systems, circular booster of cold and hot water in bath rooms as well as in competitions of equipment Pump performance range: Pump material: cast iron or cast steel or stainless steel Flow rate:4 to 1500m3/h Head:5 to 125m Speed:960rpm to 2900rpm Pump caliber: 25mm to 350mm ISGB vertical pipeline booster centrifugal pumps are made of cast iron material and the pumps are mainly used to handle the non-corrosive cold and hot water , IHGB vertical chemical centrifugal pumps are made of stainless steel material and the pumps are used in the fields of petroleum, chemical ,metallurgy, electric power , papermaking , pharmaceuticals , synthetic fiber ,etc. Specification sheet:

Minimum Order: 1 bags