Offers to Sell

Hydraulic Polyurethane (PU) Seals: Technical Specifications 1. Material Characteristics Composition: PU elastomers with customizable formulations, often reinforced with fiberglass/carbon fibers[3] Key Properties: Abrasion Resistance: 3-5x longer service life than NBR rubber Pressure Tolerance: Maintains sealing at ≤40MPa (enhanced grades) Temperature Range: -40°C to +100°C (short-term 120°C) 2. Performance Comparison AdvantageLimitation▶ Extreme wear resistance ▶ Inferior to FKM at >100°C ▶ Excellent dynamic sealing▶ Vulnerable to hydrolysis ▶ Cost-effective for heavy-duty use▶ Requires precise installation 3. Industrial Applications Primary Functions: Prevent fluid leakage in reciprocating systems Exclude contaminants in construction equipment Common Configurations: U-Cups: For piston/piston rod sealing UN Seals: Bidirectional pressure sealing UHS Series: High-pressure hydraulic cylinders 4. Selection Guidelines Dimensional Parameters: Example: UN 50×60×10 = 50mm ID × 60mm OD × 10mm thickness Chemical Compatibility: Avoid ester-based fluids and ketone solvents Not recommended for water-glycol systems >60°C Typical Service Life: 2-5 years in mining/construction equipment under proper maintenance

Minimum Order: 100

FZB fluorine plastic alloy self-priming pump Pump material: FEP/PTFE/PFA fluoroplastic alloy with WB F4 External type bellows mechanical seal and suction height is for 3 to 4 meters without bottom valve. The flow components of fluorine Plastic alloy self-priming pump is made of fluoroplastic alloy molding press. It has stronger mechanical strength, corrosion resistance, heat resistance than fluorine plastic self-priming pump. Fluoroplastic centrifugal pump is for flow backward condition (liquid) into the pump chamber without external force. Fluorine plastic alloy self-priming pump is for suction conditions (liquid within 3 meters) below the pump cavity. Flow rate: 2 to 100m3/h Head: 18-45m Connector way: Closed coupling and shaft coupling. Working principle the pump body is operated in such a way as to discharge the gas in the pump chamber, so as to generate pressure, which makes the atmospheric pressure push the liquid in the low liquid tank into the inlet vacuum pipeline, and transport the materials to the designated position through the working principle of the centrifugal pump. Pump is used to transport corrosive media or high-risk chemicals between -20℃ and 100℃.For example: hydrochloric acid, fuming sulfuric acid, hydrofluoric acid, concentrated nitric acid, phosphorus trichloride, phosphorus trichloride, caustic soda, calcium chloride, organic solvent, strong oxidant and so on. (HCL, H2SO etc) Application Urban environmental protection, construction, fire, chemical, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, papermaking, industrial and mining washing, equipment cooling, etc.

Minimum Order: 1 bags

FPZ Corrosion resistant polypropylene self priming pump /Non-metal pump FPZ self- priming non-metal pump is made of reinforced polypropylene FRPP (CFR-PP) to have high mechanical strength and corrosion resistance. The pump cavity is provided with a liquid suction chamber, liquid storage chamber, liquid return check valve, gas- liquid separation chamber, reflux hole so that the pump has the function of self- priming. Suction height: 3m to 4m. The pump is equipped with anticorrosion mechanical seal and has no leakage. Impeller and shaft are integrated. The pump and motor can be close coupling or shaft coupling. The pump is Suitable for convey general acid, alkali and salt etc. chemical liquids/fluids and widely used in chemical, pharmaceutical, food, smelting, environmental protection, sewage treatment, inorganic salt and other industries. The temperature of pumped fluids: -10 to 90 degree Celsius.

Minimum Order: 1 bags

No leakage vertical self-priming pump Features: 1. The pump adopts no leakage seal device of dynamic seal and auxiliary seal to replace the packing seal or mechanical seal. The sealing device has no friction and wear, and its service life is more than 10 times longer than that of traditional seals. It is the ideal pump to replace submerged pump, submersible pump, submersible sewage pump etc. 2. According to the principle of vacuum pump, the pump adopts electric air control valve for self-priming. Self-priming performance is stable and reliable. 3. The pump has self-priming function, high efficiency, energy saving, temperature resistance, pressure resistance and wear resistance etc. Pump structure: The pump has cone type, rectangular type, explosion-proof type, outdoor type and trolley mobile type. The choice can be made according to the installation space on the site. The explosion-proof type is suitable for flammable and explosive environment. The outdoor type is equipped with outdoor motor, and it can be used in outdoor situations. The wheeled mobile type can push the pump to any working site you need Pump material: The pump can be made of Cast iron, cast steel, stainless steel, reinforced polypropylene etc. Materials. Application: WFB no leakage self-priming pump is widely used in municipal sewage engineering, pond breeding, power, chemical, metallurgy, medicine, food, fire protection, environmental protection, electroplating, water purification, municipal, national defense, textile, paper, mining, construction, and other industries.

Minimum Order: 1 bags

Are you looking for Finance? Are you looking for Money to enlarge your business? I think you have come to the right place. We offer Cash at low interest rate. Interested people should please (WhatsApp) number +918131851434 email id : sumitihomelend@gmail.com Mr. Damian Sumiti

Minimum Order: 11 metres

FZB fluorine plastic self-priming chemical pump The flow parts are all made of F46 fluorine plastic alloy, with strong corrosion resistance, tight and reliable sealing performance, high mechanical strength, no aging, no toxin decomposition, convenient maintenance etc. characteristics. The pump body is provided with a liquid suction chamber, liquid storage chamber, liquid return check chamber, gas-liquid separation chamber, reflux hole to have the performance of self-priming. The pump needs to be infused with liquid only for the first time before the pump starts. It does not need the infusion later again. The mechanical seal does not need to add cooling water for cooling, simple operation, safety and no leakage. It is the reliable pump to replace the submerged pump.

Minimum Order: 1 bags

Corrosion resistant self-priming pump VSP self-priming pump is composed of a pump body, pump cover, rotor assembly, and power component. The rotor assembly is installed in the pump cavity composed of the pump body and pump cover, and the power component drives the rotor assembly to rotate. Through the rotation of the rotor assembly in the pump cavity, the volume of the sealing chamber changes, quickly generating a vacuum degree to absorb materials. Characteristics of VSP strong self-priming pump VSP self-priming pump has super strong suction force and a wide range of liquid viscosity. It can be used with volatile solvents and high viscosity oil adhesives. Barreled and filled liquids can be pumped and sucked clean, with a suction cleanliness higher than that of vacuum units. Moreover, when a barrel of material is emptied and inserted into the next barrel, it can be sucked up in just one second. The self-priming time is extremely short, at 3 meters/2 seconds, while other self-priming pumps have a cavitation resistance performance of over 3 meters/180 seconds. And the structure is simple, with fewer components, easy installation, easy maintenance, and long service life. 1. Strong self-suction ability: unique and innovative structure, with a suction height of 8.2 meters. 2. Short self-priming time: 3 meters/2 seconds, 5 meters/8 seconds, 8 meters/15 seconds. 3. Wide pumping range: can pump volatile solvents to high viscosity liquids. 4. Strong anti cavitation performance: capable of pumping liquid from high vacuum containers. VSP Self-priming pump usage 1.Extraction and transportation of various low specific gravity and volatile solvent solutions. 2. Barreled liquid extraction and transportation, with light and clean suction (replacing bucket pumps and vacuum pump units) 3. Extract and absorb the residue inside the tank. 4. Extraction and cleaning of sludge at the bottom of the tank and tank. 5. Chemical industries such as agriculture, pharmaceuticals, and intermediates. 6. Extraction and transportation of high viscosity liquids in industries such as daily chemicals and oil products. 7. Brewery related industries such as beer and yellow rice wine. 8. Food related industries such as dairy and dairy products.

Minimum Order: 1 bags

Adds character to your outfit, especially if the rest of your look is neutral or monochrome. Ideal for those who want to stand out subtly

Minimum Order: 1 bags

Slip-on design makes them easy to wear and remove. Generally well-padded and flexible for all-day comfort

Minimum Order: 1 bags

Yellow Tassel loafers are a staple of sophisticated menswear. The red detail gives a unique, modern twist to a traditionally conservative design.

Minimum Order: 1 bags

Can be dressed up with tailored trousers or dressed down with chinos or dark jeans. Works for office wear, parties, weddings, and semi-formal events.

Minimum Order: 1 bags

Red accents add a bold, stylish flair that makes the slippers stand out without being over-the-top.

Minimum Order: 1 bags

The smartest heat press in the industry. The new Hotronix® Fusion heat presses feature a large high-resolution IQ™ control board with intelligent features such as troubleshooting and self-diagnostic capabilities. It allows useres to track performance and print productivitiy reports from anywhere with the new Hotronix Online Portal. The larger screen has improved touchscreen response where users can program an unlimited number of frequently used application settings. Also included are a production cycle counter, auto on/off settings and eight optional language settings. Threadability™ Threadability , ™ gives you the power to quickly and easily position garments on the lower platen, significantly increasing production speed. Simply position, press, then rotate to decorate any area on the garment — front, back or sides — without removing it from the platen. Save steps, save time. Designed for Fast Garment Loading and Unloading Exclusive patented design allows it to perform as both a swinger and a draw press to accommodate both user preference and space requirements. Our new EZ-On lower platen makes slipping on garments easy as child's play with no obstruction below the lower platen, saving time and money. Plus, get even more flexibility with interchangeable lower platens (sold separately). Switch out the lower platen without tools—just pull, twist the knob, then remove, it's that easy! Twin Timer™ The Sprint® Mag XS also features the new Twin Timer™ function which allows the user to program two independent time settings to count down any two-step process without resetting the timer. Interchangeable Lower Platens (Optional) You can print just about anything, in any location, on any item with the right size heat press platen. Stahls’ Hotronix® offers additional platen sizes for bags, sleeves, pant legs, and totes. It’s a Hotronix Like all Hotronix Heat Presses, this heavy duty machine has a cast-in tubular heating element every 5cm to ensure that there are no cold spots all housed in a high-quality die cast aluminum framework. Interchangeables lower platen sizes (Optional): 18cm diameter (Round) 15cm x 25cm 20cm x 25cm 40cm x 40cm 40cm x 40cm (Umbrella) 40cm x 50cm (Umbrella) Shoe Platen Leg / Sleeve Platen Technical Specifications: 110V or 220V / 1750W Runs on 220V All Stahls heat transfer presses shipped to the United Kingdom have an UK plug. Shipping Dimensions & Weight: 89cm L x 61cm W x 56cm H / 60kg Warranty: 30 years on heating element 5 years on framework 2 years on circuit board 1 years parts and labour Free technical support More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags

This float sensor is suitable for Agfa :Anapurna M² printers. This is the original Agfa part (number D2+7621399-0002 replacing D2+2509129). This float sensor is 46.7cm long. More Information Please Visit our website Official GAOLITO PRINTER Sdn Bhd for catalog, transaction, full Description, Term and Conditions, best product, or special price.

Minimum Order: 1 bags