Offers to Sell

Keep your products safe and secure with our stretch film & pallet wrap Stretch film and pallet wrapping are excellent, cost-effective ways to increase ease of transportation whilst also preserving goods against dust, dirt or interference. In addition to simply securing cartons the stretch film or pallet wrap also has the additional benefit of sealing the goods into a secure unitized form. Machine Stretch Film: Machine film is the stretch film used on the machine, and it is also the largest type of stretch film. The advantages of using an automatic winding packaging machine to pack the entire pallet of goods compared with manual packaging are very obvious: 1 the pallet is more compact; 2 it can save stretch film; 3 the packaging efficiency is higher.

Shrink hood film provides important protection of goods and connects them to a pallet for safe transportation or storage by keeping the items tightly bound. The shrink hood is covered the loads like a hood and protected the products from dusts, snow, moisture, rain and etc. Shrink is especially suitable for glass products and products with uneven shapes. Our shrink hoods are developed to operate on all automatic shrink hood systems, or manually with heat shrink guns. In order to meet the ever increasing demands of this growing market sector, PE (polyethylene) pallet shrink hood are available in multiple formats, these products can be by the piece and in rolls. Glass and bottle industry Building industry (Cement, Bricks, Tiles, etc.) Chemical industry  Paper and cardboard product

Stretch hood films encloses shipping pallets in a single sheath of high- performance film, top to bottom. It offers five-sided pr otection: The top is closed to ensure products stay dry and to provide protection against ultra- violet radiation. The four side panels are also solid and further reduce the risk of weather damage while providing exceptional stability. The bottom edge of the pallet is tightly wrapped around the bottom edge to secure the load completely. Accept customization of various specifications Thickness: 0.07mm - 0.2mm (70μm-200μm) Circumference [max]: 2.6m - 4.8m Note: circumference = 2L + 4L1 Option: Ultraviolet-proof, Anti-static, Moisture-proof

1. Support 10 colors printing. Support surface printing and inner printing, meet your diverse needs, increase product aesthetics and benefits. 2. Excellent Clarity and gloss. The special process is adopted to avoid the fading of the ink to a great extent , and avoid the staining of the printed pattern caused by friction during transportation. 3.Resistant to tearing and puncture. Printed shrink film with high strength, good flexibility, impact resistance, shrinkage, transparency and so on. increase beauty and product benefits. 4. Reduce packaging costs. Compared with cardboard box packaging, paper basket packaging, and plastic ring buckle packaging, the cost savings of heat shrink film packaging are obvious. 5. Improve overall product sales. Printed shrink film can distinguish your products from other competitors by printing logos and unique designs. On the other hand, using different colors will draw more attention to your products, positively affect the audience's mind, and ultimately increase sales.

Shrink wrap is protecting products from moisture, dust, and other environmental factors during storage and shipping. The benefits of shrink wrap and film include improved product protection, reduced waste, enhanced product visibility, and cost-effective packaging. With the ability to customize shrink wrap to fit any product shape and size, it has become a popular packaging solution across various industries. PE Shrink Film High Transparency Shrink Film Low Temperature Shrink Film High Strength Shrink Film YH Package PE (Polyethylene) heat shrinkable film is widely used in the entire assembly packaging of beverages, mineral water, beer, paper industry, electrical Wires, furniture, building materials, metal products, dairy products, cans, cloth, glass bottles, medicines and other products. 

FYU UHMWPE submerged pump The flow components are all made of ultra-high molecular weight polyethylene (UHMWPE) integral molding. The advantages of the material: excellent wear resistance, impact resistance, creep resistance, and excellent corrosion resistance. The pump is suitable for conveying the acidic and alkaline slurry or clean liquid in the low tank within the range of -20℃~90℃ FYU corrosion resistant submerged pump is widely used in chemical industry, petroleum, machinery, sewage engineering, metallurgy, environmental protection, water treatment, hospital, food and other departments. If the mixing head is used on the pump, it will be FYU-J submerged pump with mixing slurry, which can be used for conveying slurry, or for cleaning the bottom sludge and other sediments. Performance range Flow: 1.5 to 400m3/h Head: 6 to 50m Speed: 1450rpm-2900rpm Submerged depth: 250mm-2500mm Application: All kinds of acid, alkali, corrosive slurry, electrolyte, waste acid, sewage and other medium transport Transportation of fluosilicic acid, phosphate slurry and other media Water treatment and environmental protection industry: it can transport all kinds of sewage with impurities Pesticide, dyestuff, fine industry: it can transport liquid or slurry containing dilute acid, alkali liquid and mixed acid. Suction of corrosive and non-corrosive liquid or slurry in industrial production

Minimum Order: 1 bags

Fiberglass immersible pump There are two types for FRP submersible pump. 1 - WSY pump is vertical fiberglass vortex pump. 2 - FSY type pump is vertical fiberglass submersible centrifugal pump. Because the pump is extended into the storage tank and the depth of the tank is different, the design fluid depth is optional between 800mm and 3000mm. As long as the liquid is higher than the pump body, the liquid can be started without filling. There are leakage holes under the flat cover plate, so that the liquid will not leak out of the storage tank. All the glass parts for fiberglass reinforced plastic pump which contact with the medium are with polyvinyl butyral modified phenolic glass fiber, high temperature molding phenolic. The connecting tube, fluid pipe are made of rolled semi dry process phenolic fiberglass and the impeller shaft sleeve assembly all use phenolic daub and pump shaft sticks into an organic whole. The parts assembly under liquid are for phenolic daub binder. Fiberglass plastic (no metal material) which contacts with the media has corrosion performance and reliability. The pump has light weight, high strength, non-deformation, temperature resistance, corrosion resistance and other excellent properties, in the aspect of corrosion protection can partially replace the molybdenum containing stainless steel, titanium and titanium precious alloy metals. Pump in the direction of transmission and rotation: the pump is driven directly by a motor through a clawed elastic coupling, and the pump rotates clockwise from the motor end. Fiberglass reinforced plastic submerged pump is widely used in chemical, petrochemical, refining, dyestuff, pesticide, pharmaceutical, rare earth, fertilizer and other industries. The pump is the ideal equipment used to convey all kinds of oxidizing acid (hydrochloric acid, thin sulfuric acid, formic acid, acetic acid, butyric acid) and other corrosive medium. The liquid is without suspended solid particles, not easy to crystallization and the temperature is not higher than 100 ℃.

Minimum Order: 1 bags

Pipeline sewage drainage vertical pump The pump is vertical single stage single suction pipeline pump as dry type installation. It is equipped with the impeller of single flow passage or double-flow passage and new mechanical seal and reasonable volute chamber. The pump is widely used to transport the wastewater or sewage with solid particle or long fiber etc. impurities. The inlet and outlet center lines are on a straight line and can be installed directly anywhere in the pipeline. The size of inlet and outlet is the same. It is characterized by remarkable energy saving, anti-winding, no blocking, automatic installation and automatic control. The pump material is cast iron or stainless steel (for discharging corrosive wastewater) Application: 1 - Sewage discharge in hospitals, hotels and high-rise buildings. 2 - Discharge of thin mud in municipal engineering and construction site. 3, farm sewage discharge and rural farmland irrigation. 4 - Water supply device for water plant. 5 - Mine exploration and water treatment equipment. 6 - Water supply and drainage for water conservancy projects. 7 - Enterprise wastewater discharge. 8 - Urban sewage treatment plant discharge system. 9 - Sewage and drainage stations in residential areas. 10 - Subway, basement, civil air defense drainage station

Minimum Order: 1 bags

Dry – mounted type vertical sewage pump The pump is designed and manufactured to have lower inlet, volute impeller with wide flow passage so that the wastewater or sewage with solid particle or fiber etc. impurities can pass impeller and be discharged smoothly. Pedestal base plate makes pump running more stable installation, disassembly, and movement more flexible. Double end face mechanical seal has longer life. Application: Factory business seriously polluted wastewater discharge, sewage station of main housing, urban sewage treatment plant water system, civil air defense system drainage stand, waterworks water supply equipment, hospital, hotel of sewage, municipal engineering, construction, mining machine, rural biogas digester, irrigation and other industries to discharge sewage or wastewater containing particles, dirt. The pump can also be used for water and weak corrosive medium.

Minimum Order: 1 bags

NICKEL WIRE dia 0,025 mm, NP2 (178 bobbins) Packed in 2 plastic boxes, total 21949,94 gramm, 5 million meters, with IGAS Germany, certificate and plumbs. Purity 99,8625% Location, Zurich, Switzerland Box 1: bobbins, 01-92 10924 gramm Bobbin nos 1, 33, 66, 80 Box 2: bobbins, 93-166 and 168-179 11025,94 gramm Bobbin nos 99, 12, 159, 178 IGAS certificates of analysis are available. Price €80 per meter. The nickel wire is non-radioactive and non-toxic. The product is not sanctioned. An inspection of the nickel wires can be carried out at any time by an expert of your choice, following consultation and submission of a Letter of Intent (LOI). Don't hesitate to get in touch with me in case of interest for further discussion.

Minimum Order: 2500

Made of high-quality carbon steel, it is ultra-sturdy and has the best natural non-stick coating performance. Adopt non-chemical coating to ensure healthy eating. We use nitriding process to avoid rust, so it is more durable than coated pans. The wok pan is lightweight and heats up very quickly. The surface adopts hammered design to reduce scratches and keep the beauty of the wok. Elevate your cooking experience with our premium carbon steel chef's pan. Perfect for frying, sautéing, and stir-frying, it ensures even heat distribution for exceptional results. Durable and versatile, this wok is ideal for both professionals and home cooks. This versatile Peking Wok is ideal for cooking a variety of dishes. The steel helper handle prevents burns even when stir frying at high temperatures. 100% safe, non-toxic, and PFOA-free. The high popularity of this wok product in the retail field is due to its continued high search volume, best-selling ranking, and attractive profit margins. Don't miss it when selecting products. Please contact us for more product selection suggestions.

Minimum Order: 500

Sarchi's premium non-stick 12.8" round bottom Chinese wok is made from carbon steel for durability, even heating, and a thin, lightweight design for easy one-handed stir-frying. It's perfect for a variety of Asian cooking methods that require more power than a standard stainless steel wok. Carbon steel woks are just about the most versatile cooking pans on the market and are a staple for restaurant-standard cooking. They're primarily used for stir-frying, but can also be used for pan-frying, deep-frying, steaming, and making Chinese soups. The high popularity of this wok product in the retail field is due to its continued high search volume, best-selling ranking, and attractive profit margins. Don't miss it when selecting products. Please contact us for more product selection suggestions.

Minimum Order: 500

1. High speed with automatic feeding devices 2. Backward feeding method 3. Hydraulic system for clamping bars 4. It is easy to operate and maintain the machine 5. CE, ISO9001-2008 6. High precision, stability and high durability Specification Processes and efficiency Turning cylindrical: 8-11pcs/ min Polishing: 12-15pcs/min Length of workpiece 100-600mm Cutting length 5-60mm Diameter of workpiece 2-25mm Processing range Round Motor Power 3.0KW Inverter Power 3.7KW Spindle speed 2200r/min Supply Voltage 380V 3P 50Hz Weight 750 KG Dimension 1530*950*1460mm Feeding method Backward feed

Minimum Order: 1 bags

1. Forming & cutting thread can be realized on only one machine 2. Adopt vibration bowl as automatic feeding devices 3. High speed, to save cost of time and workers 4. High precision, stability and durability 5. Easy to operate and maintain the machine Specification Max. spindle stroke 45mm Spin warp 330mm Thread diameter 2-8mm Head movement distance 260mm Distance between spindle and table 350mm Table size 225*230mm Base area 415*300mm Capacity 10-15pcs/min Dimension(L*W*H) 1330*980*1580mm Weight 500 KG Motor 380V, 4P, 750W Number of spindle swing 50HZ-1340, 760, 420 60HZ-1600, 900, 500

Minimum Order: 1 bags