Pumps

Mixed flow volute pump HW mixed flow pump is between centrifugal pump and axial flow pump. The pump has Small size, light weight, simple structure and it is easy to use and maintain. The conveyed medium is clean water or similar liquid. HW mixed flow pump is suitable for farmland drainage and industrial water supply and drainage. HW type mixed flow pump is horizontal single suction volute mixed flow pump. The pump is suitable for conveying clean water or other liquids with physical and chemical properties similar to water. It is used in farmland drainage and irrigation, industrial and urban water supply and drainage. HW volute mixed flow pump is mainly composed of pump cover, impeller, pump body, pump shaft, shaft sleeve and bearing body (diameter ≤350MM) or bearing frame (diameter ≥400mm) and other main parts. performance capacity: 180-3665m3/h Head: 3.0-20.7 m Supporting power: 3-250kW Features: 1 - simple structure, convenient usage, high efficiency, small size, light weight 2 - Transmission mode: direct transmission and variable transmission. The commonly used driven engines are electric motors and diesel engines. Motor with shaft coupling and diesel engine with pulley. 3 - Pump rotation: Viewed from pump inlet the impeller is generally for counterclockwise. Model Description: HW-300 7 s 300: pump inlet and outlet diameter (300mm) HW: Volute mixed flow pump 7: Head (7M) S: structural form (front and back door open structure) Adopt standard HW-S pump, with GB/T13008 JB/T6667 standard design and manufacture.

Minimum Order: 1 bags

Vertical stainless steel pipeline centrifugal chemical transfer pump Pump material and application IHG, IHGB type vertical stainless steel pipeline centrifugal pump is made of stainless steel (SUS304, SUS316, SUS316L etc. ) The stainless-steel pump is used for conveying corrosive liquid without solid particles. The corrosive liquid is like water. IHG Vertical stainless steel centrifugal chemical transfer pump is widely used in petroleum, chemical industry, metallurgy, electric power, papermaking, food and pharmaceutical and synthetic fiber sectors. Liquid temperature is -20℃ to 120℃. Features Vertical structure with same inlet and outlet Closed coupling between pump and motor, no vibration, low noise Shaft sea: mechanical seal with high-quality Convenient installation and maintenance, disassemble pump connection nut to open rotor parts Pump can be used by series or parallel Pump can be installed vertically or horizontally. Performance range Q: 2-2000m3/h H: 2-125m Caliber: 20-500mm Closed impeller, stainless steel pump material Motor: Standard motor or explosion-proof motor Model explanation: IHG50-200 IHG: Vertical stainless-steel centrifugal pump 50: Pump inlet(50mm) 200: impeller nominal diameter(200mm)

Minimum Order: 1 bags

QY oil-filled submersible electric pump Durable complete mechanical seal box is built in. QY oil-filled submersible electric pump consists of pump, seal and electric motor. Pump with centrifugal or axial flow structure locates the upper and electric motor filled with oil locates down the equipment. Pump and electric motor adopt the complete mechanical seal and O ring. The pump can be used for river water or sewage discharge. Features: Good seal (water-proof), small volume, light weight, no pump room, no injecting guiding water, convenient use and maintenance. Application Well irrigation and sprinkling irrigation and drainage irrigation in farmland and gardens Underground water lifting, water tower water delivery Draining flood Drainage at hatch bottom of marine. Urban construction, industrial and mining water supply and drainage Working conditions: Submerged depth is less than 5m Water temperature is less than 40 degree Celsius Solid content in water is less than 0.1% and particles diameter is less than 0.2mm No corrosive water, PH: 6.5-8 Pumped medium: clean water, well water, river water, lake water etc. Pump material: Cast iron or stainless steel

high vacuum self-priming pump VSP strong self-priming pump is mainly composed of pump body, pump cover, rotor assembly and power components. The rotor assembly is installed in the pump body and pump cover of the pump cavity. The power component drives the rotor assembly to rotate so that the volume of seal chamber in the pump cavity changes and have vacuum to suck the fluids quickly. Advantages: super self-priming performance, water test suction height of 8.2 meters, far higher than other self-suction pump 3 ~ 4 meters suction height wide viscosity range of pumped liquids, volatile solvent and high viscosity oil, glue etc. can be pumped. The filled liquids into barrel can be pumped entirely, with a higher purity than that of the vacuum unit, Self-priming time is very short, Strong cavitation resistance. And simple structure, few parts, easy installation, easy maintenance, long service life. Features 1 - Strong self-priming ability: innovative structure with a suction height up to 8.2 meters. 2 - Short self-imbibition time: 3m / 2m, 5m / 8m, and 8m / 15s. 3 - Wide pumping range: it can pump volatile solvent and high viscosity liquid. 4 - Strong cavitation resistance: it can pump the liquid in the vessel with high vacuum degree. Application 1 - Various low-specific gravity, volatile solvent solutions, extraction and transportation. 2 - Liquid extraction and delivery in drums (instead of barrel pump). 3 - The residue in the tank is pumped entirely. 4 - Extraction and cleaning of sludge from bottom of pool and tank. 5 - Agricultural, pharmaceutical, intermediate and other chemical industries. 6 - High viscosity liquid extraction and transportation in cosmetics, oil and other industries. 7 - Beer, yellow rice wine and other brewing related industries. 8 - Dairy, dairy and other food related industries.

Minimum Order: 1 bags

QJ, QJD series stainless steel multistage deep well submersible pumps are composed of motors and multistage impellers. The pumps are composed of impellers, guide blades, pump bodies, inlet and outlet joints, as well as pump shafts, axle sleeves and guide bearings. The motor adopts double end face mechanical seal, and the seal ring is "O" rubber for static seal. Pump shell adopts 201 seamless stainless-steel tube, 100% copper motor, high polymer plastic impeller and has the advantages of simple structure, high efficiency, low noise, safe and reliable operation, easy installation and maintenance. QJ, QJD series stainless steel multi-stage deep well submersible pumps are widely used in deep Wells, hot Wells and ocean extraction, and also in rivers, reservoirs and canals, etc. They are mainly used for farmland irrigation and water for people and livestock in highland mountains, and also for water supply and drainage in cities, factories, railways, mines and construction sites. QJ, QJD series multi-stage deep well submersible pump can be divided into tens or hundreds of meters underground to extract raw water. It can also be used as a fountain pump, more operations in the municipal square fountain, etc. The pump has multipurpose, small volume, light weight, obvious effect, cheap price etc. 1 - The electric pump motor adopts the F insulation class and can withstand temperature up to 155℃. The motor is filled with special oil for machinery. 2 - The main parts of the unit are made of stainless steel. The upper end cover of the motor, the pump head and the inlet joint are available in copper and nickel-plated iron. 3, the unit wear resistance and rust, beautiful appearance, easy to install. 4, the hydraulic performance of the electric pump is excellent. Pump can be used in full head. QJ, QJD pump is especially suitable for groundwater extraction in factories, schools and rural areas. It is the most ideal equipment for groundwater extraction in geological and hydrological engineering, industry, civil use and drainage and irrigation.

Minimum Order: 1 bags

AY type high temperature centrifugal oil pump is divided into six structures: single-stage single-suction cantilever type, two-stage single-suction cantilever type, single-stage single-suction cantilever type, single-stage double-suction double-support type, two-stage single-suction double-support type and two-stage single-suction double-support type. AY type high temperature centrifugal oil pump is especially suitable for conveying high temperature and flammable, explosive or toxic liquid. The installation method is horizontal center line support. The suction flange and outlet flange of the pump are cast on the pump body and are vertically upward. The bearing chamber (packing box) and the pump cover are cast into one, which can be used for packing seal, balanced type, flow type and series mechanical seal. An optional jacket of a water-cooled chamber is cast outside the shaft seal chamber. The water-cooled chamber shall be specially provided or provided when the conveying medium is water with a temperature exceeding 66 ° c and hydrocarbon action exceeding 150 ° c. Impeller for the whole casting, and through static balance check, the axial force of the pump mainly depends on the impeller balance hole to balance. The bearing body is equipped with a set of radial ball bearings and a set of thrust ball bearings mounted back to back. The bearings are lubricated with thin oil of oil swing ring. The external surface of the bearings is cast with heat sink, which can be cooled by air (T <120℃), fan cooling (T =120-260℃) and water cooling (T =260-420℃). Pump maintenance does not have to disassemble the suction or discharge pipeline. It is easy to disassemble the impeller, shaft, bearing, shaft seal and other parts. The shaft seal adopts mechanical seal. The pump is driven directly by a motor through a flexible diaphragm extension coupling. Viewed from the direction of the motor, the pump rotates counterclockwise. AY type high temperature centrifugal oil pump can be used in petroleum refining, petrochemical and chemical industries and other places to transport petroleum, liquefied petroleum gas and other media without solid particles. Flow: 1 to 612m3/h Head: 370 to 670m Liquid temperature: -20 to 400Degree Celsius. Pump material: cast iron, cast steel, alloy steel

Minimum Order: 1 bags

HD high efficiency drum pump is used to transport the ordinary medium and all kinds of strong acids and alkali, and inflammable and explosive liquids(Oils) in standard 200L barrel. Stepless adjustable speed motor, with the advantages of low noise and small impact, and equipped with overheat protection device, to prevent the motor burning for overload, thus ensuring the high reliability and durability of the motor. Pump body and motor with screw flange installation disc, convenient disassembly and installation without any tools. No leakage: no leakage design of the pump pipe, more suitable for the delivery of corrosive chemical liquid. Overload protection: the motor is equipped with overload protection device. Light weight: the total weight of pump and motor is 4-10kg, easy to carry and move. Quick: 2-3 minutes to empty a 200L standard barrel. No shaft seal: no leakage structure, no need to use mechanical seal, reduce maintenance cost. A variety of materials: polypropylene, PVDF, stainless steel, aluminum alloy material is suitable for most low middle viscosity liquid transport to meet more than 80% of the application. A variety of driving methods: electric or pneumatic drive, to meet different power sources. Humanized design: ergonomic appearance design, easier for the operator to use. Pumped liquids: it can transport ordinary medium and all kinds of strong acids and alkali, and inflammable and explosive liquids. Convenient interface: standard G1 "screw outlet, suitable for connecting all kinds of joints. Improved coupling: no alignment is required to install and only a few seconds to connect. Quick interface: the motor and pump pipe adopt quick interface, disassemble and assemble freely. Integral quick-release construction: no auxiliary tools are required for disassembly and assembly. Dry operation: self-lubricating bearings can be dried for a short time without damaging the pump line. High performance impeller: high performance open impeller with both large flow and high head. Maximum flow rate: 210L/m (electric), 80 l/m (pneumatic) maximum head: 23m (electric), 11m (pneumatic) maximum temperature: PP: 50℃, PVDF: 100℃, SS: 110℃ viscosity range: 0-2000cps (electric) maximum weight: 1.8 Pump line length: 1000mm drive mode: electric motor or pneumatic motor

Minimum Order: 1 bags

DP miniature diaphragm booster water pump 1 - Low noise, resistance to weak acid and alkali corrosion, oil resistance, high pressure, self-imbibition height 5m. 2 - The medium temperature can reach 60℃. 3 - Allow dry operation. 4 - Pressure switch is installed to protect the pump from damage during operation. 5 - The built-in overflow valve controls the normal operation of the pump. 6 - Easy to disassemble and assemble. 7 - Use safe low voltage to ensure personal safety. (12VDC/24VDC) 1 - Miniature diaphragm pump is suitable for household tap water pressurization, car washing, ship sea water desalination. 2 - It is applicable to reverse osmosis pure water machine, water treatment equipment, filter, spray device, chemical metering and liquid, sanitation, environmental protection, printing and other industries. Maximum flow rate: 1~ 12.5l /min Maximum pressure: 0.24~ 0.9mpa Power: 10 ~ 40 w Voltage: 12 ~ 24 VDC Pump body material: FRPP Diaphragm material: EPDM plastic, butyl rubber(NBR) 1 - Provide water for food, washing, bath, toilet and flushing for vehicles, ships and yachts in use. (a) water supply system for toilets of high, medium and low grade passenger cars and water dispensers;(b) water supply system for all kinds of recreational vehicles, field camping vehicles and family recreational vehicles;(c) other special vehicles, such as blood collection vehicles, ambulances, TV relay vehicles, survey vehicles, engineering vehicles and other water systems for the personnel accompanying the vehicles;(d) water supply system for various ships and yachts. Equipped with matching filters, water can be taken directly from the sea, rivers, lakes, ponds, Wells. 2 - Food and beverage processing and processing equipment to achieve fluid food transfer, distribution, filling, etc. 3 - Domestic water supply. 4 - Solar energy industry. 5 - Other equipment and systems requiring fluid transfer and ejection. For example, cleaning equipment, road construction equipment, purification equipment, cooling systems, etc.

Minimum Order: 1 bags

2 cy series of high-pressure gear oil pump is suitable for the transportation of fuel oil, diesel oil, machine oil, and other similar liquid. The liquids do not contain particles or fiber, and temperature is not higher than 200 ℃, the viscosity is not more than 1500 CST. The pump can be used as a transport, pressure, fuel injection, hydraulic and lubrication pump, stainless steel gear pump is suitable for conveying corrosive liquids without solid. Application It can be used as transmission and booster pump in oil transportation system. In the fuel system can be used as delivery, pressure, injection fuel pumps. A hydraulic pump used in hydraulic systems to provide hydraulic power. It can be used as lubricating oil pump in all industrial fields. Structure features: The 2CY series gear oil pump is composed of pump body, pump cover, gear, bearing sleeve and shaft end seal. The gears are nitride treated and have high hardness and wear resistance. All moving parts in the pump are lubricated by the medium they are conveying. The four bearing sleeves in the pump are installed in the pump body, and the end clearance is automatically adjusted with the working pressure, so the pressure of the pump is stable, the output flow pulsation is small, and the volume ratio is high. 2CY series gear oil pump is simple and compact in structure, easy to use and maintain, highly adaptable and efficient. 2YC series gear pump pressure is higher than other gear pumps. It is suitable for conveying pressure requirements up to 2.5MPA liquid.

Minimum Order: 1 bags

PF plastic chemical pump： PF pump body, pump cover, impeller of plastic chemical pump(the wet parts which contact with liquids)are made of polyvinylidene fluoride or reinforced polypropylene by molding or injection processing. Polyvinylidene fluoride (PVDF) plastics have high mechanical strength and good corrosion resistance. PF chemical pump can convey the acid at the temperature from - 50 ℃ to 80 ℃ with various concentration of sulfuric acid, hydrochloric acid, nitric acid, acetic acid, phosphoric acid, chromic acid, oxalic acid, hydrofluoric acid and alkali, chemical medium, such as organic solvents, oxidant, alkali, chemical etc. in fertilizer, dyestuff, reagent, pesticide, pharmaceutical, electroplating, environmental protection and other industrial departments to transport corrosive medium without particles as the energy-saving pump. PF series chemical pumps have direct connection structure, which is connected by the pump body and bracket with the motor flange, the bracket supports the pump body, and the impeller is directly connected with the motor through the shaft. The pumps have simple and compact structure, few parts, good performance. The rotation direction of the pump is for clockwise rotation from suction inlet to the motor, the pump outlet is vertical upward. Pump seal adopts PTFE (F4) bellows mechanical seal with corrosion resistant. The chemical pump can be made with self priming performance and the suction height is up 4m.

Minimum Order: 1 bags

CQF engineering plastic magnetic pump is the application of modern magnetics principles. The working principle of magnetic couplings is used into the centrifugal pump as the magnetic pump. Magnetic pump is with static seal instead of dynamic seal so as to make the flow components of pump be in a completely sealed state, further to completely solve the problem of leakage from mechanical seal. CQF engineering plastic magnetic pump is made of reinforced polypropylene engineering plastic (with corrosion resistance, high strength), steel ceramics, stainless steel etc. materials, so it has a good corrosion resistance and can make the transport medium away from pollution. CQF engineering plastic Magnetic pump has compact structure, beautiful appearance, small volume, low noise, reliable operation, easy to use and maintain. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, national defense, scientific research institutions, metallurgy, dye and other units. CQF engineering plastic magnetic pump is widely used to convey acid, alkali, oil etc. rare and precious liquid, venom, volatile liquid, as well as circulating water equipment, filter equipment. CQF magnetic pump is especially suitable for the liquids which is easy to leak, flammable, explosive etc. transportation. The pump driven by the explosion-proof motor is more ideal equipment. (pump material: reinforced polypropylene) Model meaning: CQF type engineering plastic magnetic pump CQF 50-25 50- inlet diameter (mm) CQF- engineering plastic magnetic drive pump 25 - head (m)

Minimum Order: 1 bags

ZYB hard tooth surface waste oil gear pump ZYB waste oil gear pump adopts self - sealing lubrication, clearance automatic adjustment structure. The flow parts are made of high wear - resistant materials. It has the characteristics of compact structure, good self-priming, high efficiency and strong adaptability, etc. In the occasions of conveying liquid containing impurities, the working life of the pump is 2-10 times longer than the general gear pump. ZYB booster gear oil pump is designed for the interchangeability with KCB series common gear pumps. And the appearance and installation size and technical parameters are exactly the same as KCB series gear pumps. Therefore, ZYB slag oil pump is also known as KCB series "strong type", which shows the important characteristics of long life and stable pressure of the pump when conveying medium with lubrication and no impurities. ZYB waste oil gear pump is suitable for conveying medium with less impurities and less lubrication in heavy oil, diesel oil, coal tar, grain oil, chemical industry, building materials, daily chemical products and other industries. Liquids temperature is no higher than 200°C and liquids viscosity is no higher than 150mm2/S containing non-metallic impurities. ZYB booster oil pump is especially suitable for stable working pressure, long-term continuous working occasions. For example: the strong lubrication system, the fuel transfer and injection in the fuel burning system. ZYB waste oil transfer pump is not suitable for conveying corrosive, containing metal impurities, sand and stone impurities with particle diameter greater than 3mm and medium with high volatility and low flash point Such as: gasoline, benzene, etc.

Minimum Order: 1 bags

DF horizontal stainless steel multistage chemical pump DF horizontal multistage pump is made of stainless steel material and is used to transport the corrosive liquids with temperature of -20 to 150℃, without solid particles. The inlet pressure of the pump is less than 0.6mpa. DF multistage pump is horizontal, single suction, multi - stage centrifugal pump. The outlet and inlet of the pump are vertically upward, and the suction section, middle section and spit section of the pump are connected together with tension bolts. Pump rotor is installed in the shaft of the impeller, balance plate and other parts. Both ends of the rotor are supported by rolling bearings or sliding bearings which are lubricated by grease. The axial forces of the rotor are balanced by the balancing disc. Features: Shaft seal can be for mechanical seal or packing seal. There is seal box in the both end of shaft seal. Mechanical seal or packing seal can be stalled inside of seal box. Water with the certain pressure is filled into the seal box for the water seal and cooling. A replaceable sleeve is provided at the shaft seal to protect the pump shaft. The pump is directly driven by the electric motor through an elastic shaft coupling. Viewed from the motor direction, the pump has clockwise rotation. Performance range: Flow range (Q) : 6-330m /h Head range (H) : 100-900m Ambient temperature (℃) : ≤40℃ Medium temperature (℃) : -20℃~105℃ Speed (r/min) : 1450-2900r/min

Minimum Order: 1 bags

BQW explosion-proof mine submersible sewage drainage pump BQW explosion-proof submersible sewage pump is designed and manufactured in accordance with the flameproof standard. In the motor part, strict flameproof measures are adopted. The motor housing is made of cast steel, the rotor shaft is made of stainless steel. The unit can drain the shallow water on the surface of the working face and also work under the water for a long time. Electric pump is with compact structure, light and small easy to move, without water diversion, double-sided seal, durable, safe and reliable, strong adaptability and other advantages. BQW explosion-proof submersible sewage pump is an advanced and reliable drainage tool used in mining, roadway, bottom hole water hole, local water hole, drainage of coal preparation factory, engineering drainage and other occasions. It is suitable for underground roadway and mining area of coal mine, underground water discharged from other working medium containing methane or explosive gas mixture of coal dust and coal water containing suspended coal powder, and also suitable for explosive environment of petrochemical system. 1 - Three-phase, AC, 50Hz / 380V or 660V (allowable deviation ±5%). 2 - The submerged depth of the submersible sewage pump shall not exceed 5m. 3 - The temperature of the conveying medium shall not exceed 40℃. 4 - The value of the pumped liquid is 6.5-10. 5 - The volume of solid impurities in sewage is generally less than 2%. 6 - The altitude shall not exceed 1000 meters. conveyed medium 1 - Groundwater containing methane or coal dust explosive gas mixture and coal water containing suspended coal powder. 2 - Sewage and general groundwater in explosive environment of petrochemical system. The motor used The motor is completely closed, mine flameproof type three - phase submerged sewage pump motor Enclosure protection form: IP68 Standard voltage (50Hz) : three-phase 380V or 660V Enclosure mark: flameproof mark "ExdIIBT4”

Minimum Order: 1 bags