Offers to Sell

High- voltage static var compensator (SVC) is a shunt device of the flexible AC transmission system (FACTS) family using power electrics to control power flow and improve transient stability on power grid. Increase the ability of transmission and strengthen the damping of low frequency oscillation and suppress sub synchronous oscillation. in addition, SVC suppress the busbar voltage change that when cause by impact load, is better to transient voltage recover, improve the system voltage stability, when this device is applied to distribution network, such as electric railway, metallurgy and other industry, the users can control reactive power effectively, improve power factor, reduce voltage influence and harmonic interference that cause by nonlinear load, balance three phase load, improve power quality, efficiency and product quality, reduce the energy consumption. Static VAR Compensators (SVCs) can be customized to the specific needs of each customer. SVCs consist of multiple fixed or switched branches, at least one of which includes thyristors, and the combination of branches can vary greatly depending on the requirements. SVCs typically include a combination of at least two of the following given items (e.g. TCR/FC or TCR/TSC/FC): Thyristor Controlled Reactors (TCR) Thyristor Switched Capacitors (TSC) Harmonic Filters (FC) The most common topologies for static VAR compensators are: TCR/FC or TCR/TSC/FC. The main advantage of using a topology with TSC branches is reduced losses (by reducing filter size). Hitachi Energy's SVC control system can be used to control new or existing external shunt banks.

FTU, DTU, RTU series feeder measurement and control terminal (FTU) is based on the advanced experience of Japan, the United States, the United Kingdom and other foreign developed countries, widely drawing opinions from domestic power system experts, combined with the actual application needs of users of the State Grid and several provinces of the Southern Power Grid. Using the new generation of feeder line measurement and control terminal developed by ADI high-performance 32-bit industrial DSP chip, the product performance reaches the highest level in the country. It has unique advantages in stability, flexible scalability, multiple fault identification, a variety of communication interfaces and technology integration, and power management.   Range of Suitability   FTU, DTU, RTU distribution network automatic feeder terminal is an intelligent terminal designed for the intelligent distribution network, widely used in the distribution network ring cabinet (DTU), open and close office (DTU), switch station (DTU), post switch (FTU), remote terminal equipment (RTU) and other places. It mainly completes the local monitoring, control and fault detection functions of the HV switchgear, and can be used as a communication relay and regional control center. The DAF-800 feeder measurement and control device can be combined with the distribution network automation master station (SCADA) or sub-station system to realize the acquisition and control of multiple circuits. Through the analysis and judgment of the line data, the fault detection and fault location can be realized, so that the fault area can be quickly isolated and the non-fault area can be restored to power supply, and the power supply reliability can be effectively improved. According to the application of different occasions, the device can be divided into: feeder terminal unit FTU(DAF-810), station terminal unit DTU(DAF-820/830 or multiple units), distribution terminal unit TTU(DAF-810).   FTU, DTU, RTU feeder measurement and control protection terminal can be connected with various types of domestic and imported ring cabinets, reclosers, circuit breakers, load switches; It can be used with various AC operating circuits such as AC380V/220V/100V, DC220V/24V DC operating circuit, motor spring energy storage mechanism, permanent magnet operating mechanism, etc.   Hardware Fundamentals   The main chip of FTU, DTU and RTU feeder measurement and control terminal adopts the 32-bit high-performance industrial DSP(digital signal processing) chip of ADI, which has a processing speed of 800MIPS and strong digital signal processing capability. The co-processor adopts the ultra-low power microprocessor of T company. The chip is a 16-bit single-chip microcomputer with a large number of on-chip peripherals and strong control and processing capability. Two processor chips communicate through high-speed synchronous serial interface (SPI) and cooperate with each other to complete the functions of the device.   The hardware of the device extends the latest large capacity ferroelectric memory (FRAM) of RAMTRON company in the United States, which has the characteristics of non-volatile, fast storage speed and large capacity, and is used to store important data such as set parameters, fault recording data and historical event records. The device is equipped with hardware clock circuit, using RAMTRON company's special clock chip, high precision and good stability, and can accept the communication time command.

HYJL-12 high voltage metering cabinet (box) (hereinafter referred to as "floor type metering box "), suitable for AC three-phase AC 50Hz, rated voltage 10kV power system as a high voltage cable into the user's electric energy metering, can be installed in parks, residential communities, industrial and mining areas of the roadside lawn, can directly open the door to see the bottom of the meter and local circuit breaker switching operation. The floor type measuring box is mainly composed of vacuum circuit breaker, cast type combined CT, lightning arrester, live display and intelligent control device, etc. The measuring mode is three-phase three-phase system and three- phase four-wire system, which can be configured with zero sequence current transformer for grounding protection. The floor type metering box conforms to GB/T 1984-2014 "High voltage AC Circuit breaker", DL/T 402-2016 "High voltage AC Circuit breaker", DL/T 403-2000 "12kV~40.5kV High voltage vacuum circuit breaker ordering technical conditions", GB/T 17201-2007 "Combined transformer" and DL/T 721-2013 "Distribution automation system remote terminal" and other technical standards. High Voltage Switchgear Cabinet Normal operating conditions Altitude: not more than 1000m, if the altitude is higher than 1000m, the rated insulation level should be corrected accordingly; Ambient temperature: upper limit +45℃, lower limit -40℃, maximum daily temperature difference 25K; Humidity: average daily relative humidity ≤95%, average monthly relative humidity ≤90%; Solar radiation intensity: 0.1Wcm2; Wind speed: 34m/ s; Wind pressure: 700Pa; Pollution grade: e level; Ice thickness: ≤10mm; Withstand earthquake resistance: horizontal acceleration 0.3g, vertical acceleration 0.2g.  Structural characteristics Small footprint, less investment, cost-effective; With automatic power supply, data processing, display, storage, alarm and automatic power off functions; Equipped with anti-theft device, can reduce unnecessary power loss for the power system; With pre-payment function to avoid users defaulting on electricity bills; The box is stainless steel floor structure, beautiful appearance and easy installation. https://www.cntdelectric.com/

Main circuit scheme number Auxiliary circuit scheme number Regular service condition The ambient air temperature shall not be higher than +40°C and not lower than -5°C, and the average temperature within 24 hours shall not be higher than +35°C. When the ambient air temperature is at +40°C, the relative humidity shall not exceed 50%. At lower temperatures, the relative humidity may be higher, for example, 90% at +20°C. However, due to temperature changes, moderate condensation may occur occasionally. It is for indoor use, and the altitude of the installation site shall not exceed 2000m. It should be installed in a place without severe vibration, shock, and where electrical components are not corroded. MNS Low Voltage Draw-Out Switchgear Structural Features This switchgear has been technologically improved based on its original design to better suit China's national conditions. The cabinet body uses C-shaped profiles with a modulus of 25mm, which are connected by connectors to form various frame structures and drawer units that can meet different requirements. In the MCC cabinet, high-strength flame-retardant engineering plastic components are used to make the safety performance more reliable. At the same time, foreign functional boards are modified and combined with a modulus of 200mm, making it more conducive to the design requirements of mixed PC and MCC cabinet bodies. The extraction unit (withdrawal unit) and the cabinet body are equipped with a reliable interlocking device to prevent load-breaking under energized conditions, improving safety. In addition, the cabinet body is generally assembled from cold-rolled steel plates after passivation treatment. It can also be made of aluminum-zinc coated steel plates according to different user requirements.

Chemical industrial pumps Our chemical industrial pumps can be made of metal such as stainless steel, bronze, titanium alloy etc. materials or plastic such as PTFE/FEP/PVDF fluoroplastic, fiberglass reinforced plastic, polypropylene plastic etc. or metal lined with plastic. Chemical pumps are widely used to convey acid, alkali, salt etc. corrosive solution. Fluoroplastic pump is used to convey sulfuric acid and has the economic cost. Polypropylene and fluoroplastic pumps are suitable to convey hydrochloric acid. Fluoroplastic pump and titanium alloy pump is suitable to convey nitric acid. Stainless steel pump and fluoroplastic pump is suitable to convey acetic acid. Stainless steel and plastic pump can be used to convey alkali such as sodium hydroxide. Stainless steel SS316 pump and bronze centrifugal pump is suitable to convey sea water or brine etc. High temperature liquids pumping usually need the pumps equipped with cooling devices. When the liquid below 120 degree Celsius is conveyed, the pump is lubricated and cooled by the pumped liquids. CZ and IH Stainless steel chemical centrifugal pumps adopt suspension structure and the pumped liquids can be up 160 degree Celsius. IHF fluoroplastic liner pump can pump the liquid up to 200 degree Celsius. When the liquid at the temperature ranges from 120 degree Celsius to 300 degree Celsius is pumped, the pump cover should have cooling chamber and seal should also have cooling liquid with double end faces mechanical seal. CQB-G high temperature magnetic pump can pump the liquids below 280 degree Celsius. For the high temperature medium above 300℃, not only the pump head part needs to be cooled, but also the suspension bearing room should be provided with a cooling system. The pump structure is generally in the form of center support, and the mechanical seal is best to use metal bellows type.

Minimum Order: 1 bags

Instek GPT-15004: Comprehensive Hipot Tester and Safety Analyzer for Electrical Equipment - Best Price at Jansen Calibration . Product Overview: The Instek GPT-15004 is a versatile and comprehensive Hipot Tester and Safety Analyzer designed for testing electrical products and components. It combines AC, DC, IR, GB, and CG functions in a single instrument, providing a complete solution for safety and performance evaluation. Features: AC Hipot Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current DC Hipot Test: Voltage range: 0 to 1500 VDC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current IR Test: Voltage range: 0 to 1000 VDC Resistance range: 0 to 1000 MΩ Test modes: Insulation resistance, continuity GB Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground bond resistance CG Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground continuity Specifications: Accuracy: ±0.5% of reading Resolution: 0.1 V, 0.1 mA, 0.1 MΩ Display: 4.3-inch color LCD Interface: USB, RS-232, Ethernet Safety: Complies with IEC 61010-1, IEC 61010-2-030

Minimum Order: 1 bags

Chroma 19071 Hipot Tester: Precision AC Testing with Sentry 10 Plus and RS- 232 Connectivity - Best Price at Jansen Calibration . Product Overview: The Chroma 19071 Hipot Tester is a high-performance AC hipot tester designed for testing the dielectric strength of electrical products. It features advanced Sentry 10 Plus software and RS-232 connectivity for remote control and data logging. Features and Specifications: AC Output: 0 to 5 kV, 0 to 10 kV, or 0 to 15 kV Test Current: Up to 100 mA Test Modes: Dielectric withstand, insulation resistance, leakage current Sentry 10 Plus Software: Intuitive user interface, automated test sequences, and data logging RS-232 Connectivity: Remote control and data transfer Safety Features: Interlock protection, overcurrent protection, and ground fault detection Compact and Portable: Lightweight and easy to transport What’s in the Box: Chroma 19071 Hipot Tester Test leads Grounding cable Sentry 10 Plus software RS-232 cable User manual

Minimum Order: 1 bags

Keysight 34470A Digital Multimeter: Unparalleled Precision for Critical Measurements - Best Price at Jansen Calibration . Product Overview: The Keysight 34470A Digital Multimeter (DMM) is a high-performance instrument designed for precision measurement in demanding applications. With its advanced features and exceptional accuracy, it empowers engineers and technicians to confidently tackle complex measurement challenges. Features and Specifications: High Accuracy: 0.0025% basic DCV accuracy Wide Measurement Range: DCV, ACV, DCI, ACI, Resistance, Capacitance, Frequency, Temperature Fast Measurement Speed: Up to 1000 readings per second High Resolution: 6.5-digit display True RMS Measurement: Accurate AC measurements on non-sinusoidal waveforms Built-in Data Logging: Store up to 10,000 readings GPIB, USB, and LAN Interfaces: Remote control and data transfer Rugged and Reliable: Designed for harsh environments What’s in the Box: Keysight 34470A Digital Multimeter Test leads Alligator clips User manual Benefits: Precise Measurements: Ensures accurate and reliable results for critical applications. Versatile Functionality: Covers a wide range of measurement needs, eliminating the need for multiple instruments. Fast and Efficient: Speeds up testing and troubleshooting processes. Data Management: Simplifies data storage and analysis. Remote Control: Enables automated testing and data acquisition. Rugged Construction: Withstands harsh conditions, ensuring long-term reliability.

Minimum Order: 1 bags

Teledyne LeCroy CP030: Precision Current Probe for AC/DC Measurements - Best Price at Jansen Calibration . Product Overview: The Teledyne LeCroy CP030 is a high-performance current probe designed for precise and reliable current measurements in a wide range of applications. With its advanced features and exceptional specifications, the CP030 empowers engineers and technicians to accurately capture and analyze current waveforms. Features: AC/DC Current Measurement: Measures both AC and DC currents with high accuracy. Wide Measurement Range: Covers a broad range of currents from 10 mA to 30 A. High Bandwidth: 50 MHz bandwidth enables capture of fast-changing current waveforms. High Voltage Rating: 300 V CAT1 safety rating ensures safe operation in high-voltage environments. Compact Design: 5mm probe tip diameter allows for easy access to tight spaces. 50 A Peak Current: Captures transient currents up to 50 A. CP Series Compatibility: Compatible with Teledyne LeCroy oscilloscopes and other instruments in the CP Series. Specifications: Measurement Range: 10 mA to 30 A Bandwidth: 50 MHz Voltage Rating: 300 V CAT1 Probe Tip Diameter: 5mm Peak Current: 50 A Accuracy: ±1% of reading Output Impedance: 1 MΩ Dimensions: 150mm x 30mm x 20mm Weight: 100g

Minimum Order: 1 bags

Tektronix TAP4000: 4 GHz Active Probe for Precision Measurements - Best Price at Jansen Calibration . Product Overview The Tektronix TAP4000 is a high-performance active probe designed for use with oscilloscopes. It offers a wide bandwidth of 4 GHz, a high input impedance of 40 kohm, and a low input capacitance of 0.8 pF. This makes it ideal for probing high-speed signals in a variety of applications, including digital design, power electronics, and telecommunications. Features 4 GHz bandwidth 10X attenuation 0.8 pF input capacitance 30V input voltage range 40 kohm input impedance TekVPI interface 1.3m cable length Benefits The TAP4000’s high bandwidth and low input capacitance make it ideal for probing high-speed signals without distorting the waveform. The high input impedance minimizes loading on the circuit under test, ensuring accurate measurements. The TekVPI interface provides seamless integration with Tektronix oscilloscopes, making it easy to set up and use. Value The TAP4000 is a valuable tool for engineers and technicians who need to probe high-speed signals. It offers a combination of high performance, ease of use, and affordability that makes it an excellent choice for a wide range of applications.

Minimum Order: 1 bags

Fast, easy, and accurate somatic cell counting in raw cow and buffalo milk. SomaticScan is a new generation counter that includes a new advanced form of the somatic cell count test, giving a more detailed picture of the actual inflammatory status of the mammary gland.Somatic cells are appear in large numbers to eliminate infections and repair tissue damage done by bacteria. Counting the cells thereby helps to indicate the presence of Mastitis in dairy cattle. ✅ Extremely user-friendly—no training required. ✅ Fully automated and precise counting of somatic cells in stained milk samples. ✅ Eliminates the subjectivity associated with traditional microscopic methods. ✅ Provides reliable information for detecting subclinical and clinical mastitis. ✅ Equipped with a top-tier direct fluorescent microscope. ✅ Color-coded results in compliance with local regulations. ✅ Low analysis cost per test. ✅ Capability to print results directly. ✅ Energy-efficient with low power consumption. ✅ 1-year full warranty with post-warranty service options available. ✅ Ergonomic, portable, and compact design. SomaticScan is a product of the Dutch company Dairy Analysis B.V.

Buy Robox 3D Printer Plus Matter And Form Desktop 3D Scanner Bundle Price : USD 545.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Supadio International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Haris*Efendi is 100% safe, Because purchase products at Haris*Efendi provide a 100% money back guarantee. Site us : https://harisefendi.com/ Phone/Whatsapp : +6281235792168

Minimum Order: 1 bags

Buy Prusa I3 MK2 3D Printer Price : USD 365.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Supadio International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Haris*Efendi is 100% safe, Because purchase products at Haris*Efendi provide a 100% money back guarantee. Site us : https://harisefendi.com/ Phone/Whatsapp : +6281235792168

Minimum Order: 1 bags

Buy MakerGear M2 3D Printer Price : USD 655.00 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : Supadio International Airport Payment : Wise, Bank Transfer, Western union, Xoom, Moneygram & Worldremit Shipment : FedEx, DHL, UPS Product : 100% New original & Warranty Haris*Efendi is 100% safe, Because purchase products at Haris*Efendi provide a 100% money back guarantee. Site us : https://harisefendi.com/ Phone/Whatsapp : +6281235792168

Minimum Order: 1 bags