Offers to Sell

·Model: 1107A ·Max Pipe Capacity:12" ·Height Adjustable Capacity:71-131 CM ·Max Load-bearing Weight:1130KGS ·Gross/Net Weight:14.3/13.3 KGS ·Packing Size:80*25*20 CM https://www.youtube.com/shorts/zEpV-9TXv , wQ

Minimum Order: 100

·Model:RD-C4 ·Max Tapping Diameter:4 inch ·Max Tapping Wall-Thickness:10mm ·Spindle Speed:120RPM ·Motor:220V 50HZ ·Power:550W ·Gross /Net Weight:29/24KGS ·Packing Size:350*320*550(mm) https://www.youtube.co , m/shorts/DIhT1xcwxfY

Minimum Order: 5 dozens

·Model:ZT-50A (750W) ·Pipe Capacity:1/2"-2" M12-M33 Metric Thread (Dies Extra) C15-C51 Conduit Pipe (Dies Extra) ·Dies:1/2"-3/4",1"-2" BSPT/NPT ·Spindle Speed:24RPM ·Motor:220V/380V Universal Motor 50HZ ·Power:750W ·Gross / Net Weight:70/58 KGS ·Packing Size:700*480*540(mm) https://www.youtube.co , m/watch?v=iFZPHsgsvwg

Minimum Order: 5 dozens

Item:RP-50 Pressure: 0--50bar Flow volume:45ml/min Water tank volume:12L G.W/ N.W: 8.2/7.7kg Meas: 51*18*29cm https://www.youtube.com/watch?v=iFZPHsgsvw , g

Minimum Order: 100

·Model:RC-S12 II ·Capacity:2 1/2"-12" ·Max.Wall - Thickness: 8mm ·Spindle Speed:23RPM ·Motor:220V/380V Universal Motor 50HZ ·Power:750W ·Gross /Net Weight:117/85KGS ·Packing Size:810*490*730(mm) https://youtu.be/DDtXV , 9txIYw

Minimum Order: 5 dozens

Model: GC-8M Pipe Capacity:￠21 mm - ￠219 mm Knurl Wheels:21mm-27mm,33mm-48mm,60mm-168mm,219mm. Pressure Wheels:21mm-48mm,60mm-168mm,219mm G.W/N.W:2 , 5.00 KGS/23.00KGS Packing Size:400*180*360(mm) https://www.youtube.co , m/shorts/Ugy5oW4Q90g

Minimum Order: 10 long tons

The core advantages of micronized wax in polishing lie in: 1. Smoothness and gloss: Micron-sized particles effectively fill minute scratches and irregularities on paintwork or material surfaces. When the polisher evenly distributes and presses these particles into micro-pores, the surface becomes exceptionally flat. This concentrates light reflection, producing a deep, mirror-like lustre. 2. Superior protective properties: Wax inherently possesses hydrophobic qualities. Upon forming an ultra-thin protective film on the surface, it effectively shields the underlying material from erosion by contaminants such as water, acid rain, ultraviolet radiation, and dust. 3. Reduced Friction and Scratch Resistance: Particularly PTFE micronized waxes exhibit an exceptionally low coefficient of friction. Following polishing, this wax film renders surfaces smoother, less prone to dust adhesion, and provides moderate resistance against minor scratches. 4. User-Friendly Operation: Micronized waxes typically disperse more readily in solvent or emulsion formulations, yielding a uniformly textured final polish. During application, they generate minimal dust, exhibit excellent workability, and are relatively straightforward to wipe clean.

PDLC material QYPDLC-100 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

The Samba G3L Printhead - 2100301262 technology delivers the breakthrough quality, speed, and scalability required for variable width, single-pass production inkjet printing, and materials deposition applications. Based on state-of-the-art silicon micro-electro-mechanical systems manufacturing (Si-MEMS), the Samba G3L Printhead - 2100301262 is the most advanced technology available today. With 2048 individually addressable nozzles, the Samba G3L Printhead - 2100301262 has 1,200 dpi native resolution (600 dpi in redundant mode) and a native ink drop size of 2.4 picoliters (pl) delivering outstanding print quality that can jet a wide range of fluids including UV curable and aqueous inks. Specifications Number of addressable Jets per module: 2048 Print width: 43mm (1.7 in.) per printhead, stitch for the infinite print width Native resolution: 1200 dpi/600 dpi in redundant mode Native drop size/largest drop size: 2.4pl to 13.2pl Firing frequency: Up to 100Khz Nominal fluid viscosity: 2 to 10 cPs (3 to 7 cPs recommended) Compatible jetting fluids: UV-curable, organic solvents, aqueous, latex Nozzle Plate technology: Silicon MEMS/ Non-wetting coating Printhead heat type: Fluids thermal transfer.

Minimum Order: 1 bags

The Brother GTX Pro CMYK Printhead is a crucial component for the Brother GTX Pro direct-to-garment (DTG) printer series. It is an on-demand piezo printhead designed specifically for high-quality color printing with CMYK inks. This printhead supports high resolution printing at 1200 dpi and is tailored for the Brother GTX Pro printer's advanced ink delivery system. Brother GTX Pro CMYK Printhead Specification: It is compatible with the Brother GTX Pro DTG printer and handles the CMYK ink channels. The printhead model numbers include BR-GT-SC0764001 and SC6192101 for the CMYK version. The printhead ensures reliable and efficient printing for garments, utilizing water-based pigment ink. Lifespan of the printhead depends on usage, cleaning, environmental conditions, and quality of inks used. Typically, the color printheads last between 50,000 to 100,000 prints. Proper maintenance, regular cleaning, and use of high-quality OEM inks significantly reduce clogging and extend the printhead life. Installation and replacement require some careful steps, including maintenance mode operations in the printer and handling the printhead with care to avoid damage. The Brother GTX Pro BR-GT-SC0764001 has two print heads: one for CMYK inks and one for white inks. The CMYK printhead handles the colored inks and produces the full-color images on garments. The printheads are precision-engineered components essential for maintaining the printer's high-quality output and are replaceable parts in the event of wear or malfunction. ​In summary, the Brother GTX Pro CMYK Printhead BR-GT-SC0764001 is a specialized printhead designed for Brother’s garment printers, delivering high resolution, vibrant, and durable prints with CMYK inks. Proper selection, maintenance, and occasional replacement of this printhead ensure optimal printer performance and

Minimum Order: 1 bags

The Konica KM512 MN Printhead is a robust, shear mode, piezo on-demand print head commonly used in high-quality printing applications. It has 512 nozzles arranged as 256 nozzles per line (two rows) with a nozzle spacing of 70.5 microns and a native resolution of 360 dpi. The droplet size is 14 pico liters, making it capable of delivering fine detail. This printhead supports binary mode and 4-level greyscale mode and operates at a firing frequency of about 7.6 to 12.8 kHz, depending on specific sub-models. It is compatible with a range of ink types including oil-based, solvent, and UV inks. The print width is approximately 36.1 mm. It is used in various printers such as Agfa Anapurna Mv and Mw models (for varnish and white ink, respectively), HP Designjet 9000s/10000s, Seiko Colorpainter 64s/100s, OCE CS 6060/6100, and other industrial printers. The Konica KM512 MN printhead key details: It has 512 nozzles arranged in 2 rows of 256 nozzles each. Native resolution is 360 dpi, achieved by 180 dpi per row doubled. The droplet size is 14 picoliters. Nozzle spacing is 70.5 microns per row, effectively 141 microns for two rows. The print width is about 36.1 mm. The firing frequency can be up to 12.8 kHz. It supports variable drop sizes in greyscale mode with up to 3 drops for enhanced print quality. Compatible with oil-based, solvent, and UV inks. The printhead does not have an integrated heater. It is used in various printers such as Agfa Anapurna M, M4f, Mv, Mw series, Allwin, Anhui Liyu Apollo models, JHF Vista, Myjet, Rodin K4320, and Oki ColorPainter among others. Original Konica product includes necessary waveform information and Head ID. Dimensions are approximately 67mm (W) x 40mm (D) x 72mm (H). Manufacturer warranty is provided. It is suitable for high-quality multi-pass printing and noted for reliability. The printhead uses a shear mode piezo on-demand printing technology. Installation should be performed by qualified technicians due to the delicate nature of the printhead. The KM512 MN is also referred to sometimes as the KM512 LNX or KM512 MNX. In summary, the Konica KM512 MN is a high-precision, versatile printhead widely used in industrial and large-format printing, known for its reliability, fine droplet size, multiple ink compatibility, and application in both binary and greyscale modes.​

Minimum Order: 1 bags

The Epson F160010 Printhead is a DX5 type printhead used in several Epson Stylus Pro series printers including models 4400, 4800, 7400, 7800, 9400, and 9800. It is designed for water-based ink systems and is known for producing high-quality, clear print results. This printhead is suitable for heavy usage and professional printing work. It is also available as an unlocked version compatible with sublimation printers. Epson F160010 Printhead Key details: Technology: Micro-Piezo print head technology. Native resolution: 1440 dpi (dots per inch). Nozzle configuration: 8 nozzle lines with 180 nozzles per line, totaling 1440 nozzles. Ink channels: 8 independent ink channels. Droplet size: Minimum droplet size of 1.5 picoliters, with a maximum of 21 picoliters. Firing frequency: Typically 8 kHz, allowing fast and high-resolution printing. Ink compatibility: Supports water-based dye and pigment inks. Printhead use: Designed to allow fast speed and high-quality printing on compatible Epson printers. Packaging: Delivered brand new and original, with protective liquid for storage. Size and weight approximately: Packaged weight around 0.5 kg and size about 14 x 10 x 9 cm. Country of origin: Japan Warranty period: 90-days after purchase. Replacement: Requires evaluation by the supplier. Ensure compatibility and professional installation to avoid voiding warranty. Contact us for exact warranty terms and claim process The Epson F160010 printhead, also known as the Epson DX5 printhead, is compatible with multiple Epson Stylus Pro series printers including models 4400, 4450, 4800, 7400, 7800, 9400, and 9800. It is a water-based micro-piezo printhead featuring 8 nozzle lines with 180 nozzles per line, offering a native resolution of 1440 dpi and supports both dye and pigment inks. Related Epson F160010 Printhead in the same family or compatible series notably include the Epson F160000, F158000, and F186000, which are also used with various Epson and some Mutoh printers. The F160010 offers high-speed, high-resolution printing capabilities typical of Epson's DX5 technology

Minimum Order: 1 bags

The Mimaki M022626 Printhead is a Gen5 printhead used primarily in Mimaki JFX500-2131 and UJV500-160 inkjet printers. It supports two and four color printing, offers 8 levels of grayscale, and has a nozzle density of up to 600 dpi. The printhead materials include stainless steel (SST), nickel alloy, and epoxy adhesive, with a coated SST nozzle plate surface. It features 4 x 320 nozzles for high-quality printing. The part number M022626 replaces older versions such as M015068 and M013497. The printhead is designed for precise inkjet printing, including UV inks, and typically comes with functions like auto-cleaning and auto keep wet systems to maintain print quality and longevity. ​This component is considered original Mimaki equipment and is often available from suppliers with delivery times ranging from a few days. It is a precision part recommended to be handled carefully, with standard procedures such as unplugging heaters during installation and regular cleaning before powering off the printer to preserve functionality. The Mimaki M022626 printhead details are as follows: Compatible with Mimaki JFX500-2131 and UJV500-160 printers. GEN5 technology (MH5420/5440 printhead). Supports printing in two and four color modes. Provides 8 levels of grayscale. Resolution up to 600 nozzles per inch (npi). Has 4x320 nozzles with a spacing of 0.1693 mm between them. Drop volume ranges between 7 to 35 picoliters (pl). Drop velocity is approximately 7 meters per second (m/s). The printhead dimensions are about 89 x 25 x 69 mm (excluding cables). Constructed with materials including stainless steel (SST), nickel alloy, and epoxy adhesive. Origin: Original parts from Japan, with warranty, guaranteeing reliability and testing standards The nozzle plate surface is coated stainless steel. Original Mimaki part number M022626. This Mimaki M022626 Printhead is noted for reliability and high-quality inkjet printing performance and is commonly used in commercial and industrial printing applications.​

Minimum Order: 1 bags

The Kyocera KJ4B-QL Printhead is designed primarily for high-speed digital textile printing using water-based inks. It features a wide effective print width of 108.25 mm, with 2,656 nozzles arranged at a 0.042 mm pitch, allowing for broad coverage with fewer printheads. The printhead delivers high-resolution output at 600 x 600 dpi and operates at a maximum drive frequency of 30 kHz. It supports variable drop volumes of 5, 7, 12, and 18 picoliters, enabling precise grayscale and high-speed printing up to 75 meters per minute. Key features include internal ink filters to remove foreign particles, an internal heater to regulate ink temperature and mitigate environmental effects, and a unique ink channel design that ensures stable ink supply and consistent performance. Its robust design with precision ceramic technology and stainless steel laminated structure ensures durability and reliability in continuous industrial printing applications. The printhead is widely used in high-volume textile printing setups, compatible with printers like the aeoon Compact Series and Textalk TKR Hybrid. Kyocera KJ4B-QL Printhead Key details include: Ink Type: Water-based Dimensions: 200 mm (W) x 25 mm (D) x 57.9 mm (H) Dry Weight: 420 g Number of Nozzles: 2,656 (2,558 effective) Drop Volumes: 5, 7, 12, and 18 pL (picoliters) Print Width: 108.25 mm Max Drive Frequency: 30 kHz Maximum print speed: about 75 m/min at 600 dpi Typical ink viscosity: 5.0 to 6.0 mPa·s Technology: Uses Drop On Demand jetting and Bend mode via piezoelectric ceramics for precise, durable, and reliable printing performance The printhead delivers up to 30,000 drops per second with high-quality output and consistent ink supply across all nozzles Compatible printers include: aeoon Compact, aeoon Compact Plus aeoon Kyo, aeoon Kyo Plus aeoon Hybrid Textalk TKR Hybrid EFI Reggiani Renoir (ReNOIR TOP) MS Italy JP6 Xerox Rialto 9000 MCS Eagle 20/30/40 This Kyocera KJ4B-QL Printhead is widely used in textile printing applications due to its balance of speed, resolution, and reliability, making it suitable for high-volume and high-quality prints.

Minimum Order: 1 bags