Offers to Sell

Proculus provides a complete and ever-improving LCD display solution for Intelligent Displays that makes GUI development simple, cost-effective, and fast. As a custom LCD and TFT display manufacturer, we can provide you the custom LCD display, LCD module, screen, and panel according to your demand. Types of Android LCM Module 5.0-18.5 inch Andorid LCD Module suitable for a variety of scenarios. Consuming-Level Android Tablet CPU: 1.6GHz Android 5.1 High Performance Android Tablet CPU: 1.6GHz Android 5.1 Premium Android Tablet CPU: 1.8GHz Android 8.1 Android LCD Module Breakdown Structure Good quality PCB board and immersion gold craft ensuring the ability of EMC and antioxidation. Premium electronic components Guarantee the stable performance Original lcd 32 inch android and touch screen providing stable pixel displaying and excellent touch feedback We supply android lcd display, android lcd screen, android to lcd monitor, android lcd 32 inch module, etc. If you want to know android lcd 32 inch price, please contact us.

Minimum Order: 1 bags

The RFID reader is an automatic identification device that can read the data of electronic tags. According to the different readings, tag frequency is divided into low frequency, high frequency, ultra-high frequency reader. RFID reader needs to be equipped with an RFID antenna to read tag information. The Principle of RFID Technology The basic working principle of RFID technology is not complicated: the Tag into the magnetic field, after receiving the rf signal from the reader, with the energy gained by the induced current send product information stored in the chip (Passive Tag, Passive tags or Passive tags), or take the initiative to send a frequency signal (Active Tag, Active Tag or Active);After reading and decoding the information, the reader sends it to the central information system for relevant data processing. The RFID label reader: The basic information carrier of the measured object is the electronic RFID card tag, which has two types. The other type is passive, which has no power source of its own and is supplied by an external power. So who's going to power it? It's the card reader in the RFID system. It is a radio frequency transceiver that, once in operation, emits an am signal to activate the electronic tag. In the case of a passive electronic tag, it has to be transmitted power. Of course, the transmission of electrical energy is limited by many external conditions. Different Types of RFID Readers Desktop Reader is an ID/ IC reader for both 125KHz and 13.56MHz dual-band. Adopt advanced plug and play, no-drive USB connection technology. By simulating the keyboard output mode, the card number of RFID card can be obtained by swiping card, which is simple and stable. At present, Desktop Reader has been widely used in data entry, information inquiry, Internet bar registration, book lending, conference check-in, and access control. The handhold readers is characterized by its read/ write functions, battery charging management function, etc. It fulfills the requirements of the customers for E-commerce application which enables the user to take the portable to where tagged items to be scanned rather than moving objects to a reader fixed at certain area.  DTB rfid is a professional rfid china manufacturers, we provide mifare classic 1k reader, mifare 1k reader, mifare 1k card reader, rain rfid reader ic, rfid bracelet reader, cell phone rfid reader, long rfid reader, dtb rfid and etc. Want to know price rfid reader or more? Please contact us.

Proculus provides a complete and ever-improving LCD display solution for Intelligent Displays that makes GUI development simple, cost-effective, and fast. As a custom LCD and TFT display manufacturer, we can provide you the custom LCD display, LCD module, screen, and panel according to your demand. Features of 8.0 Inch 800x600 LCD Module Support wide range of power supply：Default is 6~35V, use jumper to choose 4.5~5.5V; Support RS232/TTL/CMOS, the max baud rate is 921600bps; Support audio and video; Support hardware JPG decoding which makes storage more efficient and display quicker; Support offline batch download through USB Flash Drive, which improves download efficiency and reduce requirements for operators; Support backlight brightness adjustment and automatic standby screen saver function; Support multi-language font library, picture, TWO-DIMENSIONAL code display; Support number and English input, customizable keyboard interface; Support 90 degrees, 180 degrees, 270 degrees screen rotation, adjustable visual angle; Easy-to-use UnicView GUIs Development, no coding skills required; Instant operation when power on without system load time; Excellent electromagnetic compatibility characteristics. Specifications of 8.0 Inch 800*600 LCD Module Modification Record Date Content 2018/10/24 First release 2020/09/22 ESD reliability testing has been added Display Color 65K (65536) colors，16 bit color 5R6G5B Visual Angle L/R/U/D 70°/70°/50°/70° Resolution 800*600，90° rotated display (600*800) Backlight /Lifecycle/Brightness LED/20,000 HOURS/ 300 cd/m²/（100 level adjustment） Working Temperature -20~+70℃/-30~+80℃ Voltage & Current Item Condition Min. Typ. Max. Unit Power Voltage 6 12 35 V Operation Current VIN = 12V, Backlight on — 280 — mA VIN = 12V, Backlight off — 95 — Note：Short-circuit J25 to choose Power Input as 5V (4.8V~6V) Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 — 921600 bps Interface TTL/CMOS（Short-circuit J17 to choose RS232） Data Format 1 byte for initial, 8 bytes for data, invalid bytes for checksum, 1 byte for end. Peripherals Buzzer YES RTC YES Audio Port Support *.MP3 format. No time limit for single file. Theoretically 4096 files at maximum. Loudspeaker: 8Ω2W. USB YES. For downloading offline or data copy. Memory 128M(support *.jpg files, maximum 65536 files theoretically), extended to 1G at maximum. Pin definition J3 Pin Num. Pin Name Remarks J3 Pin Num. Pin Name Remarks 1 GND — 5 DOUT Serial output 2 GND — 6 NC Undefined 3 NC Undefined 7 VIN Power input 4 DIN Serial input 8 VIN Power input Packaging and physical dimensions Net weight of single piece 364g (no touch)/445g(resistive touch screen)/457g (capacitive touch screen) Weight of whole case 8.3kg (no touch)/9.9kg(resistive touch screen)/10.2kg (capacitive touch screen) Packing box size 500(mm)×335(mm)×190(mm) Packing specification 20 pieces /box Immunity Test of 8.0 Inch 800*600 LCD Module ESD test for electrostatic discharge Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: Carry out contact and air discharge on the periphery of the iron frame and the display area of the serial port screen in turn, and observe whether the screen has abnormal working phenomena such as reset restart, black screen, white screen, communication interruption, and other abnormalities. Discharge type Discharge value Result Contact discharge ±6KV Working properly. Air discharge ±15KV Working properly. Note: All tests are conducted when the products are exposed. In the actual use process, when the serial port screen is assembled on the user equipment, the screen and the equipment are kept well-grounded, the ESD performance of the whole machine will be better. EFT Test Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: The power supply line supplies power to the screen through the power supply after the pulse Group generator is coupled with the pulse Group; the serial port signal line carries out serial port communication with the screen through the signal after the pulse Group generator is coupled with the pulse Group; and the screen is observed whether abnormal working phenomena such as reset restart, black screen, white screen, abnormal communication, and communication interruption. Test item Test standard Result Voltage Frequency Power cord 4 KV 100 KHz Working properly. Signal line 2 KV 100 KHz Working properly. Interface Description of 8.0 Inch 800*600 LCD Module Interface Name Description Loudspeaker 8Ω/3W, PH2.0-2 socket. USB interface For downloading offline or user data copy. Cannot be used for power supply. Please refer to UnicView Connection Guide. User interface Used for power supply serial communication. Standard serial communication protocol. 8 pin_2.0mm socket. Note: The products of our company may always be updated, and are subject to change without notice unless modification of key structure process or major adjustment of layout is involved. The real products shall prevail.

Minimum Order: 1 bags

Proculus provides a complete and ever-improving LCD display solution for Intelligent Displays that makes GUI development simple, cost-effective, and fast. As a custom LCD and TFT display manufacturer, we can provide you the custom LCD display, LCD module, screen, and panel according to your demand. Features of 7 inch 1024x600 capacitive touch screen Support wide range of power supply：Default is 6~35V, use jumper to choose 4.5~5.5V; Support RS232/TTL/CMOS, the max baud rate is 921600bps; Support audio and video; Support hardware JPG decoding which makes storage more efficient and 7 inch tft touch screen quicker; Support offline batch download through USB Flash Drive, which improves download efficiency and reduce requirements for operators; Support backlight brightness adjustment and automatic standby screen saver function; Support multi-language font library, picture, TWO-DIMENSIONAL code display; Support number and English input, customizable keyboard interface; Support 90 degrees, 180 degrees, 270 degrees screen rotation, adjustable visual angle; Easy-to-use UnicView GUIs Development, no coding skills required; Instant operation when power on without system load time; Excellent electromagnetic compatibility characteristics. Specifications of 7.0 Inch 1024*600 LCD Module Modification Record Date Content 2019/03/28 First release 2020/09/09 ESD reliability testing has been added Monitor tft 7 inch Display Color 65K (65536) colors，16 bit color 5R6G5B Visual Angle L/R/U/D 85°/85°/85°/85° Resolution 1024*600，90° rotated display (600*1024) Backlight /Lifecycle/Brightness LED/20,000 HOURS/ 400 cd/m²/（100 level adjustment） Working Temperature -20~+70℃/-30~+80℃ LCD panel 7 inch Voltage & Current Item Condition Min. Typ. Max. Unit Power Voltage 6 12 35 V Operation Current VIN = 12V, Backlight on — 300 — mA VIN = 12V, Backlight off — 100 — Note：Short-circuit J25 to choose Power Input as 5V (4.5V~5.5V) Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 — 921600 bps Interface TTL/CMOS（Short-circuit J17 to choose RS232） Data Format 1 byte for initial, 8 bytes for data, invalid bytes for checksum, 1 byte for end. Peripherals Buzzer YES RTC YES Audio Port Support *.MP3 format. No time limit for single file. Theoretically 4096 files at maximum. Loudspeaker: 8Ω2W. USB YES. For downloading offline or data copy. Memory 128M(support *.jpg files, maximum 65536 files theoretically), extended to 1G at maximum. Pin definition J3 Pin Num. Pin Name Remarks J3 Pin Num. Pin Name Remarks 1 GND — 5 DOUT Serial output 2 GND — 6 NC Undefined 3 NC Undefined 7 VIN Power input 4 DIN Serial input 8 VIN Power input Packaging and physical dimensions Parameter Data Net weight of single piece 223g (no touch)/274g(resistive touch screen)/285g (capacitive touch screen) Weight of whole case 8.2kg (no touch)/9.8kg(resistive touch screen)/10.1kg (capacitive touch screen) Packing box size 470(mm)×370(mm)×140(mm) Packing specification 32 pieces /box Immunity Test of 7.0 Inch 1024*600 LCD Module ESD test for electrostatic discharge Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: Carry out contact and air discharge on the periphery of the iron frame and the display area of the serial port screen in turn, and observe whether the screen has abnormal working phenomena such as reset restart, black screen, white screen, communication interruption, and other abnormalities. Discharge type Discharge value Result Contact discharge ±6KV Working properly. Air discharge ±15KV Working properly. Note: All tests are conducted when the products are exposed. In the actual use process, when the serial port screen is assembled on the user equipment, the screen and the equipment are kept well-grounded, the ESD performance of the whole machine will be better. EFT Test Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: The power supply line supplies power to the screen through the power supply after the pulse Group generator is coupled with the pulse Group; the serial port signal line carries out serial port communication with the screen through the signal after the pulse Group generator is coupled with the pulse Group; and the screen is observed whether abnormal working phenomena such as reset restart, black screen, white screen, abnormal communication, and communication interruption. Test item Test standard Result Voltage Frequency Power cord 4 KV 100 KHz Working properly. Signal line 2 KV 100 KHz Working properly. Interface Description of 7.0 Inch 1024*600 LCD Module Interface Name Description Loudspeaker 8Ω/3W, PH2.0-2 socket. USB interface For downloading offline or user data copy. Cannot be used for power supply. Please refer to UnicView Connection Guide. User interface Used for power supply serial communication. Standard serial communication protocol. 8 pin_2.0mm socket. Note: The products of our company may always be updated, and are subject to change without notice unless modification of key structure process or major adjustment of layout is involved. The real products shall prevail.

Minimum Order: 1 bags

Proculus Technologies is the leading TFT display supplier and TFT display manufacturer in the industry of embedded devices, focusing on All-in-one TFT LCDs including UARTs and Android Solutions. Features of 4.3 Inch LCD 480*272 Module 4.3 inch tft lcd Module Support wide range of power supply：Default is 6~35V, use jumper to choose 4.5~5.5V; Support RS232/TTL/CMOS, the max baud rate is 921600bps; Support audio and video; Support hardware JPG decoding which makes storage more efficient and display quicker; Support offline batch download through USB Flash Drive, which improves download efficiency and reduce requirements for operators; Support backlight brightness adjustment and automatic standby screen saver function; Support multi-language font library, picture, TWO-DIMENSIONAL code display; Support number and English input, customizable keyboard interface; Support 90 degrees, 180 degrees, 270 degrees screen rotation, adjustable visual angle; Easy-to-use UnicView GUIs Development, no coding skills required; Instant operation when power on without system load time; Excellent electromagnetic compatibility characteristics. Specifications of TFT 4.3 Inch 480*272 LCD Module Display Color 65K (65536) colors，16 bit color 5R6G5B ACTIVE AREA / View Area 95.0mm(width)×53.9mm(height)/97.5 mm(width)×56.4 mm(height) Resolution 480*272，90° rotated display (272*480) Backlight /Lifecycle/Brightness LED/20,000 HOURS/ 250 cd/m²/（64 level adjustment） Working Temperature -20~+70℃/-30~+85℃ Voltage & Current Item Condition Min. Typ. Max. Unit Power Voltage - 5.0 5.5 V Operation Current VIN = 5V, Backlight on - 450 - mA VIN = 5V, Backlight off - 260 - mA Recommended Power Supply: 5V 1A DC Reliability Test Item Condition Min. Typ. Max. Unit Working Temperature 　60%RH at 5V voltage -20 25 70 ℃ Storage Temperature - -30 25 85 ℃ Working Humidity 25℃ 10% 60% 90% RH Protective Paint - - None - - Aging Test - - 8 - H Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 115200 921600 bps User-Defined 1200 - 921600 bps Output Voltage （TXD、BUSY） Output 1,Iout=1mA 3.0 3.2 - V Output 0,Iout=-1mA - 0.1 0.2 V Input Voltage （RXD） Input 1,Iin=1mA 2.0 3.3 15.0 V Input 0,Iin=-1mA -15.0 0.0 0.3 V Interface Mode is determined by Jumper6: ON = 8N1, 3.3V TTL/CMOS; OFF = 8N1, RS232 Socket HY2.0-8P/10pin,1.0mm FFC USB None SD slot Yes (SD/SDHC, FAT32 file format) Memory Item Parameter Min Typ. Max Unit Flash Space of Font - 32 - MB Picture Storage (128MB) - - 365 Pcs Picture Storage (256MB) - - 215 Pcs Picture Storage (1GB) - - 932 Pcs User’s Storage 0 - 32 MB Peripherals Buzzer Yes RTC Yes Resistive touch screen Yes SD Card Yes Model number P48272J43C_N02 No Touch P48272J43C_T02 Resistive Touch P48272J43C_P02 Pcap Touch Packaging and physical dimensions Parameter Data Dimensions 121.9(width) ×74.4(height) ×12.6(thickness without TP) / 14.1(thickness with TP) mm Net weight of single piece TBD Weight of whole case TBD Packing box size TBD Packing specification 120 pieces /box Related products 4.3 inch dsi lcd module lcd tft 4.3 inch module 4.3 inch touch screen 4.3 inch lcd display

Minimum Order: 1 bags

Proculus Technologies is the leading TFT display supplier and TFT display manufacturer in the industry of embedded devices, focusing on All-in-one TFT LCDs including UARTs and Android Solutions. P10768MS150P_T01 is an industrial level Android LCM based on Rockchip RK3288 ARM. It is equipped with Quad-core Coretex-A17, supports most decoding solutions under 1080p@60fps, H.265/H.264/MVC/VP8 solutions under 1080p@60fps and many other great features of Rockchip RK3288. Meanwhile, with good jpeg picture processing performance and 3D GPU, it supports OpenGL ES2.0 and 1.1 OpenVG1.1. RK3288 has high-performance external memory interface (DDR3/DDR3L/LPDDR2) capable of sustaining demanding memory bandwidths, also provides a complete set of peripheral interface to support very flexible applications. Specifications of 15 Inch Android LCD module Core Board CPU 1.8GHz Quad-core A17 ARM RAM 2GB DDR3 eMMC 8GB GPU Mali-T764 MP4 Power Management ACT8846 PMU 15 inch tft display System Version Android Android 5.1/8.1 Ubuntu Ubuntu 13.09 (Default system is Android. Need to refresh firmware to choose Ubuntu. Apps need to be developed separately.) 15 inch tft Display Color 16.7M (16777216) colors, 24-bit color 8R8G8B. Active Area (A.A.) 304.10 mm(W)×228.10 mm(H), 1024×768. View Area (V.A.) 307.40 mm(W)×231.30mm(H), 1024×768. Resolution 1024×768 Backlight LED Brightness 300nit Optical Specifications Item Symbol Condition Min. Typ. Max. Unit Viewing Angle (CR≧10) θL Φ=180° (9 o’clock) 85 89 — Degree θR Φ=0° (3 o’clock) 85 89 — θT Φ=90° (12 o’clock) 85 89 — θB Φ=270° (6 o’clock) 85 89 — Voltage & Current Item Condition Min. Typ. Max. Unit Power Voltage 6 12 18 V Operation Current — — 400 — mA Power Supply 12V 3A DC (Recommended). Reliability Test Item Condition Min. Typ. Max. Unit Working Temperature 60%RH at 12V voltage -30 25 70 ℃ Storage Temperature — -30 25 85 ℃ Working Humidity 25℃ 10% 60% 90% RH Protection Paint — — None — — Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 115200 115200 bps User Defin 1200 — 115200 bps Serial Mode Serial Port*5 (4*RS232/TTL, 1*RS485). User Interface Standard serial communication protocol. 4Pin_2.54mm socket. USB USB DEBUG*1. USB HOST*8. Ethernet Support 10m/100m Ethernet. Wi-Fi Support 802.11b/g/n Wi-Fi wireless network. 4G LTE Module 4G LTE Module/GPS. Peripherals Microphone Audio input interface. Loudspeaker 2-channel, 4Ω/3W loudspeaker. HDMI HDMI output interface. IIC Yes TF card Yes Interface Description of 15 tft monitor Android LCD module Num. Interface Name Description J0 Power 12V2A power supply J1 SPK_R Right channel audio output interface J2 SPK_L Left channel audio output interface J3 MIC Audio input interface J4 UART0 Device name: ttyS0. Pin definition: GND, RX, TX, 5V J5 UART1 Device name: ttyS1. Pin definition: GND, RX, TX, 5V J6 UART3 Device name: ttyS3. Pin definition: GND, RX, TX, 5V （choose one from J6 and J8) J7 UART4 Device name: ttyS4. Pin definition: GND, RX, TX, 5V J8 RS485 Device name: ttyS0. Pin definition: 5V, A, B, GND/Same as J6 （choose one from J6 and J8) J9 RJ45 interface Support 10M/100M network J10 Wireless Network Support IEEE802.11b/g/n network. Support Wireless & Bluetooth 2-in-1 J11 SIM card Nano-SIM supported J12 MINI PCIE 4G 4G LTE Module/GPS J13 Debug interface not open temporarily J14 USB_HOST1 Horizontal USB2.0. Support USB Peripherals J15 USB_HOST2 Horizontal USB2.0. Support USB Peripherals J16 USB_HOST3 Horizontal USB2.0. Support USB Peripherals J17 USB_HOST1 Vertical 4P2.54mm. Support USB Peripherals J18 USB_HOST2 Vertical 4P2.54mm. Support USB Peripherals J19 USB_HOST3 Vertical 4P2.54mm. Support USB Peripherals J20 USB_Micro OTG /App debugging/ Firmware upgrade interface J21 HDMI HDMI output interface J22 Buzzer J23 Recovery Short-circuit to enter firmware burning mode J24 RTC Supply system RTC J25 TF Card J26 Wake Up J27 User interface Pin Definition: 12V, 12V, GND, GND, ttyS0-RX,  ttyS0- TX,  ttyS1-RX, ttyS1-TX If you want to know 15 inch tft monitor price list, please contact us.

Minimum Order: 1 bags

Proculus Technologies is the leading TFT display supplier and TFT display manufacturer in the industry of embedded devices, focusing on All-in-one TFT LCDs including UARTs and Android Solutions. Features of 10.4 Inch LCD Module Support wide range of power supply：Default is 6~35V, use jumper to choose 4.5~5.5V; Support RS232/TTL/CMOS, the max baud rate is 115200bps; Support audio and video; Support hardware JPG decoding which makes storage more efficient and 10.4 inch lcd display quicker; Support offline batch download through USB Flash Drive, which improves download efficiency and reduce requirements for operators; Support backlight brightness adjustment and automatic standby screen saver function; Support multi-language font library, picture, TWO-DIMENSIONAL code display; Support number and English input, customizable keyboard interface; Support 90 degrees, 180 degrees, 270 degrees screen rotation, adjustable visual angle; Easy-to-use UnicView GUIs Development, no coding skills required; Instant operation when power on without system load time; Excellent electromagnetic compatibility characteristics. Specifications of 10.4 Inch 800*600 LCD Module Modification Record Date Content 2019/04/24 First release 2020/09/18 ESD reliability testing has been added 10.4 lcd Display Color 65K (65536) colors，16 bit color 5R6G5B Visual Angle L/R/U/D 70°/70°/50°/70° Resolution 800*600，90° rotated display (600*800) Backlight /Lifecycle/Brightness LED/20,000 HOURS/ 350 cd/m²/（100 level adjustment） Working Temperature -20~+70℃/-30~+80℃ 10.4 lcd monitor Item Condition Min. Typ. Max. Unit Power Voltage 6 12 35 V Operation Current VIN = 12V, Backlight on — 360 — mA VIN = 12V, Backlight off — 120 — Note：Short-circuit J25 to choose Power Input as 5V (4.5V~5.5V) Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 — 115200 bps Interface RS232（Short-circuit J17/J18 to choose TTL/CMOS） Data Format 1 byte for initial, 8 bytes for data, invalid bytes for checksum, 1 byte for end. Peripherals Buzzer YES RTC YES Audio Port Support *.MP3 format. No time limit for single file. Theoretically 4096 files at maximum. Loudspeaker: 8Ω2W. USB YES. For downloading offline or data copy. Memory 128M(support *.jpg files, maximum 65536 files theoretically), extended to 1G at maximum. Pin definition J3 Pin Num. Pin Name Remarks J3 Pin Num. Pin Name Remarks 1 GND — 5 DOUT Serial output 2 GND — 6 NC Undefined 3 NC Undefined 7 VIN Power input 4 DIN Serial input 8 VIN Power input Packaging and physical dimensions Parameter Data Net weight of single piece 575g (no touch)/696g(resistive touch screen)/728g (capacitive touch screen) Weight of whole case 12.7kg (no touch)/15.2kg(resistive touch screen)/15.8kg (capacitive touch screen) Packing box size 500(mm)×335(mm)×245(mm) Packing specification 20 pieces /box Immunity Test of 10.4 Inch 800*600 LCD Module ESD test for electrostatic discharge Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: Carry out contact and air discharge on the periphery of the iron frame and the display area of the serial port screen in turn, and observe whether the screen has abnormal working phenomena such as reset restart, black screen, white screen, communication interruption, and other abnormalities. Discharge type Discharge value Result Contact discharge ±6KV Working properly. Air discharge ±15KV Working properly. Note: All tests are conducted when the products are exposed. In the actual use process, when the serial port screen is assembled on the user equipment, the screen and the equipment are kept well-grounded, the ESD performance of the whole machine will be better. EFT Test Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: The power supply line supplies power to the screen through the power supply after the pulse Group generator is coupled with the pulse Group; the serial port signal line carries out serial port communication with the screen through the signal after the pulse Group generator is coupled with the pulse Group; and the screen is observed whether abnormal working phenomena such as reset restart, black screen, white screen, abnormal communication, and communication interruption. Test item Test standard Result Voltage Frequency Power cord 4 KV 100 KHz Working properly. Signal line 2 KV 100 KHz Working properly. Interface Description of 10.4 Inch 800*600 LCD Module Interface Name Description Loudspeaker 8Ω/3W, PH2.0-2 socket. USB interface For downloading offline or data copy. Cannot be used for power supply. Please refer to UnicView Connection Guide. User interface Used for power supply serial communication. Standard serial communication protocol. 8 pin_2.0mm socket. Note: The products of our company may always be updated, and are subject to change without notice unless modification of key structure process or major adjustment of layout is involved. The real products shall prevail.

Minimum Order: 1 bags

Proculus Technologies is the leading TFT display supplier and TFT display manufacturer in the industry of embedded devices, focusing on All-in-one TFT LCDs including UARTs and Android Solutions. Features of 10.1 Inch 1024x600 LCD Module Support wide range of power supply：Default is 6~35V, use jumper to choose 4.5~5.5V; Support RS232/TTL/CMOS, the max baud rate is 921600bps; Support audio and video; Support hardware JPG decoding which makes storage more efficient and 10.1 inch hdmi lcd display quicker; Support offline batch download through USB Flash Drive, which improves download efficiency and reduce requirements for operators; Support backlight brightness adjustment and automatic standby screen saver function; Support multi-language font library, picture, TWO-DIMENSIONAL code display; Support number and English input, customizable keyboard interface; Support 90 degrees, 180 degrees, 270 degrees screen rotation, adjustable visual angle; Easy-to-use UnicView GUIs Development, no coding skills required; Instant operation when power on without system load time; Excellent electromagnetic compatibility characteristics. Specifications of 10.1 Inch Display 1024x600 LCD Module Modification Record Date Content 2018/05/30 First release 2020/10/16 ESD reliability testing has been added 10.1 TFT LCD monitor Color 65K (65536) colors，16 bit color 5R6G5B Visual Angle L/R/U/D 70°/70°/50°/70° Resolution 1024*600，90° rotated display (600*1024) Backlight /Lifecycle/Brightness LED/20,000 HOURS/ 400 cd/m²/（100 level adjustment） Working Temperature -20~+70℃/-30~+80℃ Voltage & Current Item Condition Min. Typ. Max. Unit Power Voltage 6 12 35 V Operation Current VIN = 12V, Backlight on — 335 — mA VIN = 12V, Backlight off — 95 — Note：Short-circuit J25 to choose Power Input as 5V (4.5V~5.5V) Interface Item Condition Min. Typ. Max. Unit Baud Rate Standard 1200 — 921600 bps Interface TTL/CMOS（Short-circuit J17 to choose RS232） Data Format 1 byte for initial, 8 bytes for data, invalid bytes for checksum, 1 byte for end. Peripherals Buzzer YES RTC YES Audio Port Support *.MP3 format. No time limit for single file. Theoretically 4096 files at maximum. Loudspeaker: 8Ω2W. USB YES. For downloading offline or data copy. Memory 128M(support *.jpg files, maximum 65536 files theoretically), extended to 1G at maximum. Pin definition J3 Pin Num. Pin Name Remarks J3 Pin Num. Pin Name Remarks 1 GND — 5 DOUT Serial output 2 GND — 6 NC Undefined 3 NC Undefined 7 VIN Power input 4 DIN Serial input 8 VIN Power input Packaging and physical dimensions Parameter Data Net weight of single piece 445g (no touch)/550g(resistive touch screen)/560g (capacitive touch screen) Weight of whole case 9.9kg (no touch)/12kg(resistive touch screen)/12.2kg (capacitive touch screen) Packing box size 500(mm)×335(mm)×190(mm) Packing specification 20 pieces /box Immunity Test of 10.1 Inch LCD 1024*600 Module ESD test for electrostatic discharge Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: Carry out contact and air discharge on the periphery of the iron frame and the display area of the serial port screen in turn, and observe whether the screen has abnormal working phenomena such as reset restart, black screen, white screen, communication interruption, and other abnormalities. Discharge type Discharge value Result Contact discharge ±6KV Working properly. Air discharge ±15KV Working properly. Note: All tests are conducted when the products are exposed. In the actual use process, when the serial port screen is assembled on the user equipment, the screen and the equipment are kept well-grounded, the ESD performance of the whole machine will be better. EFT Test Test ambient temperature: 25℃ Test ambient humidity: 50% Test process: The power supply line supplies power to the screen through the power supply after the pulse Group generator is coupled with the pulse Group; the serial port signal line carries out serial port communication with the screen through the signal after the pulse Group generator is coupled with the pulse Group; and the screen is observed whether abnormal working phenomena such as reset restart, black screen, white screen, abnormal communication, and communication interruption. Test item Test standard Result Voltage Frequency Power cord 4 KV 100 KHz Working properly. Signal line 2 KV 100 KHz Working properly. Interface Description of 10.1 Inch LCD Display Interface Name Description Loudspeaker 8Ω/3W, PH2.0-2 socket. USB interface For downloading offline or data copy. Cannot be used for power supply. Please refer to UnicView Connection Guide. User interface Used for power supply serial communication. Standard serial communication protocol. 8 pin_2.0mm socket. Note: The products of our company may always be updated, and are subject to change without notice unless modification of key structure process or major adjustment of layout is involved. The real products shall prevail.

Minimum Order: 1 bags

Minimum order quantity 100g Price Negotiable Lead time Within 3days upon receipt of payment Delivery time About 3 days Packaging details Aluminum foil bags or fiber drum Trade terms CIF,CFR, FOB Payment terms T/T,West Union,Paypal, Credit Card Port Shanghai Port,Guangzhou Port,Tianjin Port Our advantages 1.High quality with competitive price. 2. All purity>99%. 3. We are manufacturer and can provide high quality products with factory price. Fast and safe delivery. 1. Parcel can be sent out in 24 hours after payment tracking number available. 2. Secure and discreet shipment verious transportation methods for your choice. 3. Customs pass rate >99%. 4. We have our own agent/remailer/distributor who can help us ship our products very fast and safe, and we have stock in there for transferring.

Minimum Order: 1 bags

Proculus Technologies is the leading TFT display supplier and TFT display manufacturer in the industry of embedded devices, focusing on All-in-one TFT LCDs including UARTs and Android Solutions. UART LCD Module Proculus intelligent displays, integrated LCD, touch panel and graphical interface greatly reduce the development complexity and time requirements. You can easily build up your interface project on PC using. Proculus GUI designer UnicView AD. Your project can be exported to touchscreen through USB Flash Drive or TF card. Its all-in-one display solution transforms your artist's imagination into reality quickly and at low costs. Starter Kit For sampling and testing, Proculus offers a starter kit that includes everything you need to understand how to use our LCMS. Android LCD Module Proculus industrial level Android LCM based on Rockchip & MTK ARM supports most decoding solutions. It not only has good ipeg picture processing performance. but also provides a complete set of peripheral interface to support very flexible applications. It supports general APP development platform. With open SDK and root access. you can cut development time greatly. Proculus Android LCM is an advanced and powerful solution for industrial Android. TFT LCD Display Technology Its intelligent displays, integrated LCD, touch panel, and graphical interface, greatly reduce the development complexity and time requirements for products which request rich and beautiful GUIs, by moving the hard work of graphical processing out from the microcontrollers to the LCM itself. Software UnicView@, the tool of GUI development designed by Proculus, transforms your artist's imagination into reality quickly and at low costs. TFT LCD MODULE APPLICATION Proculus Intelligent Display solutions cover most of the common scenarios. FAQ of Proculus LCD Modules What company are you?What company are you? Proculus Technologies, is the leading serial lcd display module company in the industry of embedded devices, focusing on All-in-one LCD display TFT modules including UARTs and Android Solutions. As one of the leading 4k lcd panel manufacturers, Proculus Technologies provides a completed solution on Intelligent Display, including intuitive visual interface software, high-quality color lcd display module, accessories as well as dedicated technical support. We have types of TFT display, LCD panel, and screen for sale, otherwise, there is the transflective LCD module and custom TFT display can be provided. If you want to buy touch screen lcd display module products (panel, display, and screen), please contact us as soon as possible! What kind of interface does the TFT LCD touchscreen display have?What kind of interface does the TFT LCD touchscreen display have? What products line/category do you have?What products line/category do you have? What kind of display size you can supply?What kind of display size you can supply? How can we start to use your LCD display and module products?How can we start to use your LCD display and module products? How about lead time?How about lead time? Do you have local support in my country?Do you have local support in my country? Flashing or blurred screen when powered on?Flashing or blurred screen when powered on?

Minimum Order: 1 bags

email: elsa@xingjiubiotech.com whatsapp: +86 19133956091 Pharmaceutical Intermediates CAS 236117-38-7 CAS 28578-16-7 CAS 1451-82-7

Minimum Order: 1 bags

M3043 adopts Lcos array optical waveguide. This optical display module is a top-down module, which is mainly used in AR equipment in the form of helmets and safety helmets. FOV reaches more than 40°. The transmittance is more than 85%. Compared with competitors, the brightness is higher, the image size is larger, and the distortion is small. Technical Specifications Of M3043 Optical Module Item Spec M3043 Field of View Diagonal FOV 43 Display Panel Technology 0.55'  LCOS Aspect ratio 16:09 Horizontal display resolution 1920 Horizontal display resolution 1080 FPS up to 420 Hz Pixel Pitch 6.3 Panel dimensions 12.096×6.804 Eyebox&Eye Relief Eyebox 13×10 Eye Relief 22 Image quality Virtual imaging size 93''@3m Contrast 1000:1 Optical distortion <4 See-through transmission See-through transmission >85% Weight Weight ~40g Optical module seize Seize ~29.5*51*16 Features Of M3043 Optical Module M3043 adopts Lcos polarized array optical waveguide display. This module is a top-down module, which is mainly used in AR equipment in the form of helmets and safety helmets. FOV reaches more than 40°. The transmittance is more than 85%. Compared with competitors, the brightness is higher, the image size is larger, and the distortion is small. Small: the size of the projector is reduced by 85% Light: weight is about 33g Thin: Refraction distortion is less than 2mm Color: ultra-high contrast, resolution, color reproduction, and ultra-full color gamut coverage Low power consumption: battery life can last about 10 hours Large viewing angle: M3043 adopts a top-down structure, the horizontal field of view is completely unobstructed Goolton is a professional augmented reality companies, we provide high tech smart glasses, ar glasses china and etc. Want to know more? Please contact us.

We provide two types of optical modules with customized R&D and services. M2026 uses Micro OLED plus array optical waveguide display, which is a side- entry module, mainly used for normal-form AR glasses. The characteristics of M2026 optical display module are light and thin, and the weight of a single module is about 12g. The light transmittance of the array light guide is more than 80%, which is close to the light transmittance of normal glasses. Compared with other peers using this technology, our module has a larger FOV, less distortion, and higher brightness. Technical Specifications Of M2026 Optical Module item Spec M2026 Field of View Diagonal FOV 26° Display Panel Technology 0.23' OLED Aspect ratio 16:10 Horizontal display resolution 640pixels) Horizontal display resolution 400pixels FPS 60Hz Pixel Pitch 8μm Panel dimensions 5.054×3.276mm Eyebox&Eye Relief Eyebox 7.6x7mm Eye Relief 22mm Image quality Virtual imaging size 55''@3m Contrast 100000：1 （ratio） Optical distortion <2% See-through transmission See-through transmission >80% Weight Weight 12g Optical module seize  seize 24.5*23.5*8.5mm Contrast Between Oled and Lcos AR Optical Module Micro OLED has a higher contrast ratio without a light white background. The Lcos display is similar to a screen due to its low contrast. Compared with OLED, Lcos optihas higher brightness, higher resolution, and higher power consumption and volume weight. Goolton is a professional augmented reality companies, we provide company ar, waveguide ar glasses, ar waveguide, waveoptics, chinese ar glasses and etc. Want to know more? Please contact us.

Minimum Order: 1 bags

Hotel Napkin Size: Standard 55 x 55cm or Customized Made of: 100% Cotton Color: White/Blue/Green/Pink or Customized Hotel Linen Supplier, Hotel Table Linen Supplier, Hotel Napkin Supplier, Wholesale Hospitality Linen, Custom Hotel Linen: www.peanutextile.com

Minimum Order: 1000