Offers to Sell

They are similar to a drop wire clamp. This mechanical device is a single-tension piece of hardware used to fasten overhead transmission and distribution wires and cables to a pole, building, etc. Steel Cable Clamps will compress those wires and cables to become horizontally straight. Or at least straight enough that the wire won’t stoop too low. Cable Tension Clamps are also used to support the cable’s weight, keeping tension on the line while relieving stress on the attachment points.

ADSS hardware are used to secure ADSS cables to utility poles. The integration test between the fitting and the cable is approved according to the "NESC Heavy Duty" standard. The correct ADSS hardware are determined by the outside diameter of the cable and the length of the span to be covered. What is an ADSS cable? ADSS (All Dielectric Self-Supporting) cables are ideal for installation in power distribution and transmission environments, even when a live installation is required. As the name implies, no supports or slings are required, so a single installation is all that is needed, making ADSS an economical and simple way to.

DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp Downlead clamp is used to guide fiber optic ground wire (OPGW) from the top of the structure to the junction box.Huaneng's lead-off clips are easy to install, provide proper spacing and maintain strength without damaging the cable. From poles to towers, Huaneng offers a full line of downlead clamp for OPGW to meet the needs of any application.

ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.

OPGW joint boxs, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW) OPGW Joint Box The OPGW joint box is used to store the fiber core splices leading to the control room patch panel.The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.

GH4169 high temperature alloy rod is a precipitation-hardened nickel-based superalloy, renowned for its exceptional balance of mechanical properties across a wide temperature range. Its core composition includes nickel (50-55%), chromium (17-21%), and significant additions of niobium, molybdenum, and titanium—elements that work together to enhance strength, toughness, and stability. This alloy rod stands out for its ability to maintain structural integrity from cryogenic conditions (as low as -253°C) up to elevated temperatures of 650°C, making it a versatile choice for industries requiring reliability in extreme thermal environments. Key performance attributes of GH4169 rod further solidify its industrial value. It boasts high tensile strength (typically 1,240 MPa at room temperature) and excellent fatigue resistance, critical for components subject to repeated stress, such as aerospace fasteners and turbine disks. Additionally, it offers strong creep resistance—meaning it resists deformation under long-term high- temperature loads—and good corrosion resistance, even in harsh settings like marine or chemical processing environments. Its weldability and machinability are also notable, allowing for precise fabrication into complex parts without compromising performance, which explains its widespread use in aerospace, power generation, and oil and gas sectors. Key Features of GH4169 Superalloy Rod High Tensile Strength: Typically 1,240 MPa at room temperature, ensuring strong load-bearing capacity. Fatigue Resistance: Ideal for components that undergo repeated stress, such as aerospace fasteners and turbine disks. Creep Resistance: Resists deformation under high-temperature loads, vital for components in power generation. Corrosion Resistance: Performs well in aggressive environments like marine and chemical processing settings. Weldability & Machinability: Can be welded and precisely machined into complex components without losing mechanical properties. Application Fields of GH4169 Superalloy Rod Aerospace: Used for critical engine components such as fasteners, turbine disks, and other high-stress parts exposed to high temperatures. Power Generation: Applied in gas turbines, nuclear reactors, and steam generators that require high heat resistance and mechanical strength. Oil and Gas: Ideal for downhole tools, valve components, and high-performance parts subjected to extreme thermal and pressure conditions. Marine: Used in components exposed to saltwater and corrosive environments due to its superior corrosion resistance. Chemical Processing: Utilized in systems that require materials with both high mechanical strength and resistance to corrosive chemicals.

1J33 is a high-performance magnetic alloy known for its superior magnetic properties, making it a popular choice in various industries. It features high magnetic permeability, ensuring efficient transmission and concentration of magnetic fields, which enhances performance in applications such as magnetic sensors and inductors. The alloy also boasts low coercivity, offering stable and reliable magnetic responses over time, and good temperature stability, maintaining its magnetic characteristics across a wide temperature range. In the electronics industry, 1J33 is widely used in components like magnetic sensors, where precision and stability are essential for accurate measurements. It is also commonly employed in instrumentation applications, ensuring consistent and reliable performance. In the aerospace sector, this alloy is used in specialized magnetic components, where its high magnetic permeability and reliability are crucial to achieving superior performance. Key Features of 1J33 Soft Magnetic Alloy High Magnetic Permeability: Ensures efficient transmission and concentration of magnetic fields for superior device performance. Low Coercivity: Provides easy magnetization and demagnetization, enhancing response time in dynamic systems. Temperature Stability: Maintains magnetic properties across a wide temperature range, ensuring reliable operation in various environmental conditions. Good Stability: Retains consistent magnetic performance over time, making it suitable for long-term applications. Application Fields of 1J33 Soft Magnetic Alloy Electronics: Widely used in magnetic sensors and inductors for applications requiring high sensitivity and stable performance. Instrumentation: Used in precision measurement tools and instruments, where stable and accurate magnetic responses are essential. Aerospace: Employed in specialized magnetic components in aerospace systems, offering high reliability and performance under extreme conditions. Automotive: Used in components such as magnetic actuators and motors, where efficiency and reliability are essential for high-performance vehicles.

Nimonic 75 high temperature alloy bar is a high-performance nickel-based superalloy that is well known for its excellent oxidation and corrosion resistance, especially in high-temperature environments. It is predominantly composed of nickel, chromium, and molybdenum, with additional elements like titanium and aluminum to enhance its mechanical properties. This alloy is designed to retain its strength and structural integrity under extreme conditions, making it ideal for use in industries such as aerospace, power generation, and petrochemical processing. Nimonic 75 alloy bars are widely used in manufacturing critical components that operate in high-stress environments, including turbine blades, engine components, and exhaust systems. They can withstand temperatures exceeding 800°C, ensuring reliable performance in various thermal applications. Key Features of Nimonic 75 Alloy Bar High-Temperature Resistance: Can maintain strength and integrity at temperatures up to 800°C (1472°F), making it ideal for high-temperature applications. Oxidation and Corrosion Resistance: Excellent resistance to oxidation, ensuring the alloy performs well in harsh environments, particularly those involving exposure to air, water, and chemicals. Superior Strength and Toughness: Offers high tensile strength and toughness, particularly under thermal stress, making it suitable for use in aerospace and turbine applications. Good Fabricability: Can be easily welded, machined, and fabricated, ensuring it meets the custom requirements for various parts and components. Custom Diameters: Available in a range of diameters to meet specific manufacturing needs, ensuring flexibility in application. Application Fields of Nimonic 75 Alloy Bar Aerospace: Widely used in the aerospace industry for the production of high- stress engine components, such as turbine blades and exhaust nozzles. Power Generation: Ideal for use in gas turbines and other high-temperature power generation equipment where high strength and oxidation resistance are essential. Petrochemical: Employed in chemical processing plants and refineries for components exposed to harsh chemicals and high temperatures. Automotive: Used in high-performance automotive engines, particularly in parts that require resistance to heat and corrosion. Industrial Equipment: Applied in industries requiring high-strength components for high-temperature and corrosive environments, such as heat exchangers and valves.

GH3039 high temperature alloy bar is a high-performance nickel-based alloy rod known for its exceptional mechanical properties and resistance to high- temperature environments. This alloy is primarily used in demanding applications where resistance to oxidation, corrosion, and fatigue is critical. GH3039 alloy offers outstanding strength and stability, even under extreme stress and temperature conditions, making it ideal for use in industries such as aerospace, power generation, and chemical processing. This alloy is particularly known for its high temperature and oxidation resistance, making it a versatile material for manufacturing parts that will operate at elevated temperatures. The GH3039 alloy rod, with a 3/4" diameter, is widely used in turbines, jet engines, and other critical components that require both high strength and durability. Key Features of GH3039 Nickel-Based Alloy Rod High-Temperature Resistance: GH3039 alloy maintains excellent strength and resistance at temperatures above 600°C, ensuring reliable performance in high- temperature environments. Excellent Oxidation Resistance: The alloy is resistant to oxidation, even in extreme thermal and chemical environments, making it suitable for turbine blades, heat exchangers, and other components exposed to harsh conditions. Superior Mechanical Properties: GH3039 exhibits excellent tensile strength, fatigue resistance, and creep strength, making it ideal for components that face repeated thermal and mechanical stress. Corrosion Resistance: It is highly resistant to corrosive environments, including exposure to harsh chemicals, seawater, and industrial gases. Good Fabricability: GH3039 alloy can be easily welded, machined, and fabricated into complex shapes, which is essential for custom applications.

Nimonic 90 high temperature alloy plate is a high-performance nickel-chromium alloy that is engineered for use in extreme high-temperature environments. Known for its exceptional resistance to heat, oxidation, and corrosion, Nimonic 90 is widely used in industries where materials are exposed to intense heat and harsh conditions. This high-temperature alloy plate is available in various thicknesses (1mm - 50mm), with custom sizes available upon request. It is commonly used in aerospace, power generation, and chemical processing, offering high mechanical strength and excellent stability even at temperatures as high as 950°C. Key Features of Nimonic 90 High Temperature Alloy Plate Temperature Resistance: Nimonic 90 can withstand temperatures up to 950°C, ensuring optimal performance even in extreme conditions like those found in gas turbines, reactors, and high-stress aerospace applications. Corrosion Resistance: The alloy's ability to resist oxidation and corrosion makes it an excellent choice for high-temperature environments where exposure to corrosive gases and fluids is common. High Mechanical Strength: This alloy maintains exceptional strength and reliability under thermal stress, ensuring the longevity and safety of critical components. Ductility and Toughness: Nimonic 90 retains its ductility even at elevated temperatures, allowing for easy fabrication and welding without compromising its mechanical properties. Dimensional Stability: The alloy plate maintains its shape and dimensions over prolonged exposure to high temperatures, ensuring precise engineering for sensitive applications.

This extruded aluminum heat sink features a wide base and high-density vertical fins for fast and reliable heat dissipation. Designed for excellent thermal performance, it is lightweight, durable, and corrosion resistant, making it ideal for LED lighting, power electronics, and industrial applications. Shanghai Glary www.glarysh.com

Minimum Order: 2 barrels

liquid crystal for PDLC Switchable film 19years of PDLC nematic liquid crystals production experience. Established in 2007, Qingdao QY Liquid Crystal Co., Ltd. is a leading manufacturer specializing in liquid crystal materials and Nematic liquid crystals in China, especially the liquid crystals for making PDLC smart film. We mainly export our LCs to U.S.A, South Korea ,European countries and other global markets.

Minimum Order: 20 square metres

4J29 Kovar wire, a high-performance Precision Alloy , is renowned for its exceptional mechanical and physical properties. Manufactured to the highest standards of quality control, this alloy wire features a fine diameter and uniform structure, ensuring reliable performance across various industries. With outstanding resistance to heat, wear, and corrosion, 4J29 Kovar wire is perfect for applications in high-tech fields such as electronics, aerospace, medical devices, and automotive industries. Its superior tensile strength and flexibility make it indispensable for creating intricate electrical connections, precision sensors, and high-strength filaments. Key Features of 4J29 Kovar Wire High Precision: 4J29 Kovar wire is produced with extremely tight tolerances, ensuring that the diameter and mechanical properties are consistent throughout. This level of precision is crucial for applications where even the smallest deviation could cause significant issues. Superior Mechanical Properties: The wire offers excellent tensile strength, fatigue resistance, and ductility, making it durable under harsh conditions. It can withstand high stress, repeated bending, and other extreme environments without failure or deformation. Tailored Alloy Compositions: The alloy composition can be customized to meet specific application requirements, optimizing the wire's electrical, magnetic, and thermal properties. This flexibility allows it to excel in various industries. High Surface Quality: The wire has a smooth, clean surface finish, which reduces friction and enhances its performance in wire-drawing, winding, and electrical contacts. This ensures better reliability in all applications. Application Fields of 4J29 Kovar Wire 4J29 Kovar wire is used across several industries due to its versatile properties. Key application areas include: Electronics Industry: In electronics, 4J29 Kovar wire is used for manufacturing micro-springs, connectors, and sensors. Its high precision and excellent electrical conductivity ensure stable connections and accurate sensing, making it essential for reliable electronic devices. Aerospace and Defense: In aerospace and defense, 4J29 Kovar wire is used in critical components such as aircraft engine parts, missile guidance systems, and communication equipment. Its ability to resist high temperatures, extreme stress, and harsh environments ensures the safety and reliability of these high-stakes applications. Medical Devices: The biocompatibility, strength, and corrosion resistance of 4J29 Kovar wire make it ideal for use in medical devices, including surgical instruments, orthopedic implants, and cardiovascular devices. These properties ensure patient safety and contribute to the longevity of medical implants. Automotive Industry: 4J29 Kovar wire is used in the automotive industry for fuel injection systems, sensors, and electrical wiring. Its high durability and performance help improve vehicle efficiency and reduce maintenance costs, enhancing overall vehicle reliability. Advantages of 4J29 Kovar Wire High-Precision Performance: 4J29 Kovar wire provides consistently precise dimensions and mechanical properties, ensuring accuracy in critical applications where deviations could cause system failure or reduced efficiency. Durability in Harsh Environments: Its superior mechanical strength and resistance to corrosion, heat, and wear make 4J29 Kovar wire ideal for use in demanding environments such as aerospace, defense, and automotive industries. Customization for Specific Applications: The ability to customize the alloy composition allows for optimization in electrical, magnetic, and thermal properties, making 4J29 Kovar wire adaptable to a wide range of industries and applications. Superior Surface Quality: The smooth surface finish of 4J29 Kovar wire reduces friction, enhancing its performance in manufacturing processes like wire- drawing, winding, and electrical contacts, resulting in more reliable and efficient components. Chemical Composition of 4J29 Kovar Wire 4J29 Kovar wire is primarily composed of nickel, iron, and cobalt, with precise alloying elements tailored to provide specific thermal and mechanical properties. The balance of these elements ensures that the wire performs well under high temperatures and extreme mechanical stress. Packaging & Shipping We ensure that 4J29 Kovar wire is securely packaged to avoid damage during transportation. Our high-quality packaging protects the wire from contamination and environmental factors, ensuring it arrives in excellent condition. Shipping details, lead times, and packaging options can be discussed with our team upon request.

Incoloy 800 H rods are high-performance alloy products primarily composed of nickel, iron, and chromium, designed to perform in extreme environments. These alloy rods are well-regarded for their outstanding resistance to oxidation and corrosion at elevated temperatures, making them ideal for demanding industrial applications. Whether exposed to heat, chemicals, or mechanical stress, Incoloy rods provide unmatched durability and reliability. Key Features of Incoloy 800H Rods High-Temperature Resistance: Incoloy 800H rods maintain their structural integrity and strength at temperatures exceeding 1,000°C (1832°F), making them highly suitable for extreme heat applications. Corrosion and Oxidation Resistance: With high chromium and nickel content, Incoloy 800H offers exceptional resistance to a broad range of corrosive environments, including acidic and oxidizing conditions. This makes it ideal for use in chemical and petrochemical industries. Excellent Mechanical Strength: The rods boast high tensile and yield strength, providing exceptional durability under mechanical stress. This makes them reliable even in extreme conditions like high-pressure systems and heavy industrial use. Thermal Stability and Creep Resistance: Incoloy 800H is known for its ability to resist creep deformation over prolonged exposure to high temperatures, ensuring long-lasting performance in demanding thermal environments. Weldability and Machinability: These rods can be welded and machined using appropriate techniques, allowing for versatile fabrication and construction. This makes them suitable for complex projects requiring precision and custom solutions. Applications of Incoloy 800H Rods Incoloy 800H rods are used across a wide range of industries that demand high performance in challenging conditions. Common application areas include: Petrochemical and Refining Industries: Incoloy 800H is commonly used in equipment exposed to high temperatures, corrosive gases, and acidic environments, such as furnace tubes, heat exchangers, and piping systems in refineries. Power Generation: These rods are used in components of nuclear reactors, steam generators, and boiler tubes, where high heat resistance and mechanical strength are critical for efficiency and safety. Aerospace Components: Incoloy rods are ideal for aerospace applications, such as jet engines and exhaust systems, where high-temperature stability and corrosion resistance are essential to ensure safety and reliability. Marine and Chemical Processing Equipment: Incoloy 800H’s ability to resist aggressive saltwater, brine, and acids makes it perfect for valves, fittings, and other components in marine and chemical processing industries. Oil and Gas Industry: Incoloy rods are used in well tubing, casing, and completion equipment in the oil and gas industry, offering resistance to sour gas and other harsh conditions. Benefits of Incoloy 800H Rods Longevity and Durability: The exceptional corrosion and heat resistance of Incoloy 800H significantly reduce the need for frequent maintenance and replacement, ensuring a longer service life in demanding applications. Enhanced Safety and Reliability: With its ability to perform reliably under extreme conditions, Incoloy 800H rods help ensure the safety and stability of critical industrial systems. Cost-Effectiveness in High-Performance Applications: While Incoloy 800H may come with a higher initial cost, its long lifespan, reduced maintenance needs, and reliability in high-stress environments often lead to lower overall operational costs. Versatility: Incoloy 800H rods are not only resistant to heat and corrosion, but also offer excellent weldability and machinability, making them versatile for a variety of applications across different industries. Chemical Composition of Incoloy 800H Rods Incoloy 800H rods are primarily composed of nickel, chromium, and iron. The high nickel content ensures excellent resistance to oxidation and corrosion, while the chromium provides added protection against oxidative environments. Other alloying elements such as titanium and aluminum further enhance the alloy's stability and performance in high-temperature settings. Packaging & Shipping We ensure that Incoloy 800H rods are securely packaged for safe delivery. Our robust packaging protects the rods from external factors during transportation, ensuring they arrive in perfect condition. For detailed shipping options and lead times, please feel free to contact us.