Offers to Sell

For a hydraulic manifold block with many deep holes and great difficulty in finishing, the original hydraulic manifold block manufacturer worked on the trial order for 15 days. After 15 days of processing, the single hole processing cost increased by nearly 30%, and the production efficiency was only 1/5 of the normal. Leon understood that the processing cost was not affordable and had to change the manufacturer of the hydraulic manifold block. After AAK took over, the welding reamer with special groove and blade design was used to replace the conventional hard reamer. The linear speed was up to 680m/min, the production efficiency was increased by more than 10 times, and the processing cost of single hole position was only 1/3 of that of the original hydraulic manifold block manufacturer Leon, from Germany, is one of our old customers, mainly purchases hydraulic valves. Leon contacted me a few days ago and asked me to try a special hydraulic manifold block test order, and specifically reminded that the original manufacturer used a hard reamer in the finishing process, the roughness can only reach about Ra1.6, the linear speed is not higher than 50m/min, and the tool processing service life is not more than 300 pieces. The aperture tolerance of this hydraulic manifold block shall be ± 0.005mm, and the hole wall roughness shall meet Ra0.8 and Ra3.2 at the same time. If the conventional coating hard reamer is used, the machining accuracy is difficult to reach the standard, and the service life of the tool is very short, which greatly increases the single hole processing cost, that is, increases the customer's purchase cost. After 3 days of research and discussion, we replied Leon that AAK was 90% confident. After 25 days, AAK sent 6 hydraulic manifold block samples. 2 weeks later, Leon told us that the precision of AAK hydraulic manifold block fully conforms to the system error standard, and hoped that we could provide a competitive development price. Leon was surprised that how did AAK hydraulic manifold block achieve that the hole processing cost was 1/3 of the original manufacturer's, and the production efficiency was more than 10 times higher? In view of the structure and processing technology of the hydraulic manifold block, AAK technical team realized that the traditional hard reamer processing technology was not suitable for the processing of this hydraulic manifold block. Through repeated design verification and trial cutting, it is finally determined that the welding reamer with special groove and blade design should be used to replace the conventional hard reamer, with the linear speed of 680m/min, the efficiency increased by more than 10 times, the tool processing service life increased from 300 pieces to 2,500 pieces, and the processing efficiency and tool service life increased significantly. AAK hydraulic manifold block, not only high precision, welcome to try! https://www.aakindustry.com/info-detai , l/hydraulic-manifold-blocks-aak462

Tim comes from Mexico, and started purchasing hydraulic cartridge directional control valves from AAK 3 years ago, including customized ones and models benchmarking SUN or HydraForce. At the beginning of this year, Tim wanted AAK to lower the price of a hydraulic cartridge directional control valve equivalent to HydraForce. The reason was that he received quotations from other hydraulic cartridge manufacturers in China, which were 13% cheaper than AAK. I gave him a 3% discount, but Tim still chose a new hydraulic cartridge valve manufacturer. 3 months later, Tim came back to AAK. After communication, it was learned that he had encountered trouble with burrs in the hydraulic cartridge directional control valves produced by the new hydraulic cartridge valve manufacturer. Within 3 months of delivery from the new hydraulic cartridge valve manufacturer, some customers complained that a small amount of hydraulic cartridge directional control valves were stuck, due to burrs. The manufacturer of the hydraulic cartridge directional control valve blamed that it was caused by the uncleanness of the hydraulic oil. Tim realized that he had chosen a hydraulic cartridge valve manufacturer with unstable quality, there won't be much gain from further discussion. He could only stop losses in a timely manner. Tim knows that it has been 3 years since purchasing the hydraulic cartridge valves from AAK, and there has never been jamming of the hydraulic cartridge directional control valve due to burrs. I laughed and said to Tim, 'You can't always think of AAK only when you fall into troubles with other hydraulic cartridge valve manufacturers in China.’ Tim asked me to deliver 20 hydraulic cartridge directional control valves as soon as possible, resolving the customer's complaints first. After 3 days, the AAK samples were delivered and Tim's troubles were also resolved. How can hydraulic cartridge directional control valves be guaranteed to be free of burrs? AAK prefers abrasive flow deburring. Our technicians operate it this way: First installing each hydraulic cartridge directional control valve into the abrasive flow disc, covering it with a disc cover, and then setting parameters such as injection pressure, injection angle, and injection duration for the abrasive flow equipment. Then start the program and the device will run for 2 minutes before completing the deburring process, while most hydraulic cartridge valve manufacturers in China complete it in 70 seconds to save time. If it is less than this time, it may cause a small amount of burr residue. Finally, the worker used an air gun to blow out any remaining abrasive particles on each components of the hydraulic cartridge directional control valve. Due to the characteristics of semi-solid abrasives, like "mud", they are flowable and have adsorption properties. Under compression, the abrasive shuttles through various channels, taking away hidden burrs that are difficult to clean. The enclosed areas of the components are deburred and also polished. AAK hydraulic cartridge directional control valve, without burrs, and very shiny polished, you can also give it a try! AAK HYDRAULIC VALVES (630) 2023-07-18 https://www.aakindustry.com/info , -detail/directional-control-valves-aak630

This week, we’d like to introduce a Hydraulic Cartridge Direct-Acting Relief Valve equivalent to SUN standard part RDFA. The direct-acting relief cartridges are normally closed, pressure-limiting valves used to protect hydraulic components from pressure transients. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves are smooth and quiet, essentially zero leak, dirt tolerant, immune to silting and are very fast. Last year, one of our Russian customers sent inquiry for model RDFA Direct- Acting Relief Valve, 10 pcs for trial order and 500 pcs for annual order. At that time, AAK did not have existing procedure for this model yet, and it takes at least 30 days for us to develop it. The customer did not have time to wait and purchased the existing stocks from another hydraulic cartridge valve manufacturer in Ningbo China. But they have been purchasing other hydraulic cartridge valves as well as customized hydraulic manifolds from AAK, and are very satisfied with the quality. At the beginning of this year, they checked with us again if AAK can provide RDFA Direct-Acting Relief Valve now, because the valves they purchased from AAK have the longest average service life, they want to buy this model from AAK. We delivered 10 pcs of testing samples on March. Last week, we received the 500 pcs of annual order for RDFA from this Russian customer, which means that AAK samples have passed their testing. AAK hydraulic cartridge direct-acting relief valve 2 advantages: 1. Function and Performance benchmarking SUN 2. Its service life is 2 times that of its domestic peers Technical parameters of AAK E-RDFA Hydraulic Direct-Acting Relief Valve: Max. Operating Pressure: 350 bar (5000 psi) Flow: 200 L (50 gpm) Internal Leakage: 10 drops/min Temperature: - 30 to +100 °C (with Standard Buna N seals) Cavity: T-3A Fluids: Mineral based or synthetic hydraulic fluid with lubricating properties Fluid Viscosity Range: 7.4 to 420 cSt AAK E-RDFA hydraulic cartridge Direct-Acting Relief Valve, equivalent to SUN RDFA, and the service life is 2 times of its domestic peers. You are welcome to try it out. AAK HYDRAULIC CARTRIDGE VALVES (744) 2023-12-25 https://www.aakindustry.com/info , -detail/relief-valves-aak744

HPVMF Series High Performance KUBOTA Hydraulic Piston Pump HPVMF16 HPVMF23 HPVMF32 Motor Spare Parts ITEM PART DESCRIPTION QUANTITY/SET 1 PISTON 9 2 CYLINDER BLOCK 1 3 VALVE PLATE 1 4 RETAINER PLATE 1 5 DRIVE SHAFT 1 6 THRUST PLATE 1 7 COIL SPRING 1 8 BARREL WASHER 2 9 SNAP RING 1 Product Name: Hydraulic Pump Parts & pump assy Model: Supply All Brand Spare Parts,Pls Kindly Tell Us Your Need keyword: rotary motor parts/travel motor parts /pump parts Package: Carton MOQ: 1PC In Stock: Yes Warranty: 3 months Travel Motor Assy Final Drive Assembly Delivery: 1-3 days for stocks, 5-10 days for non-stocks Payment: T/T, Western Union, Paysend, LC etc Delivery Methods: Air/ Express/ Sea We Supply Various Excavator Spare Parts Can Provide More Specifiions & Dimensions, If You Need it. Cylinder Block Valve Plate Piston Shoe Set Plate Ball Guide Coil Spring Drive Shaft Swash Plate Servo Piston Gear Pump Regulator Socket Bolt Rotor Spacer And So On We Supply Various Pump Assy & Spare Parts Can Provide More Specifiions & Dimensions, If You Need it. KAWASAKI REXROTH EATON K3SP36C K7SP36C /K3V45 K3V63 K3V112 K3V140 K3V180 K3V280 K4V45/K3VL28 K3VL45 K3VL63 K3VL80 K3VL80 K3VL112 K3VL140 K3VL200/K7V63 K7V100 K7VG180 K7VG265/K5V80 K5V140 K5V160 K5V180 K5V200/K3VG63 LZV180 LZV260 LZV500 A4VSO40 A4VSO45 A4VSO50 A4VSO56 A4VSO71 A4VSO125 A4VSO180 A4VSO250 A4VSO355 A4VSO500 A4VSO750 A4VSO1000/A4VG28 A4VG40 A4VG56 A4VG71 A4VG90 A4VG125 A4VG180 A4VG250/A4V40 A4V56 A4V71 A4V90 A4V125 A4V250 A4V0130 33/39/46/54/64/76 70122/72400/78461/ , 78462 PVXS060 PVXS090 PVX130 PVX180 PVX250 PVE12 PVE19 PVE21 TA19 MFE19 PVM018 PVM020 PVM045 PVM050 PVM057 PVM063 PVM074 PVM081 PVM098 PVM106 PVM131 PVM141 PVB5 PVB6 PVB10 Komatsu Hitachi SBS80 SBS120 SBS140 ( 345 320 325) SPK10 /10(E200B) SPV10/10(MS180)/320) VRD63(120)/E200B/ 200B/E207D/ 207D/E70B 70B E308 12G 14G 16G 120G 140G 215 225 235 245 320B 330B 345 355D E200B AP- 12 HPV75 HPV95 HPV132 HPV140 HPV165 /PC60-7 PC220-6 PC200-7 PC300-6 PC300-7 PC360-7 PC400-7 PC400-6/PC600-7/PC400-7/PC60-8 PC70- , 8 PC75UU PC78US-6/PC40-8 PC2000-8/PC3000-8/PV200-6 P200-7 PC300-6 PC300-7 HMV110 HMV160/KMF40 PC160-7 HPV050 HPV102 HPV105 HPV118 HPV135/HPV116 HPV145/HPV125B HPVUHO7 HPV083 HMT125AE/HMGC16 HMGC32 HMGC48/HMGF35 HMGF36 HMGF38 HMGF57 HPK055 EX120-6/AP5S53 AP5S67 EX100 EX100-2 EX100-3 EX100-5 HMGF95/ZX330 LIEBHERR KYB TOSHIBA LPVD , 35 LPVD45 LPVD64 LPVD75 LPVD90 LPVD100 LPVD125 LPVD140 LPVD165 LPVD225 LPVD250 FMV075 FMV100 LMF45 LMF64 LMF75 LMF90 LMF100 LMF125 LMF140 LMV45 LMV64 LMV75 LMV90 PSVD2-13E PSVD2-16E PSVD2-17E PSVD2-19E PSVD2-21E PSVD2-26E PSVD2-27E PSVD2-57E PSV2-55T PSV2-62T PSV2-63T PSVH-45CS PSVS37 PSVS90 PSV-10 PSV-16 PSV-37C PSV2-10 PSV2-16 PSVL-36 PSVL-42 PSVL-54 PVB80 PVB90 PVC80 PVC90 TADANO100 PAVA8282 PAVA6565 LUCUS400 LUCUS500 HD450V-2 SG015 SG02 SG025 SG04 SG08 SG12 SG15 SG17 SG20 SG25 MFB80 MFB100 MFB150 MFB160 MFB170 MFB180 MFB190 MFB200

Product Description 55inch Touch Screen Digital Kiosk Windows All In One Computer Infrared Touch Screen Product parameters LCD Screen Resolution 1920*1080/3840*2160 optional Screen Ratio 16:9 Dynamic Contrast ≥5000:1 Viewing Angle ≥178º Brightness 450 cd/m² Life Time 100000h Brand New A+degree 2K/4K Screen Full-screen Display without black border, no blind spot Touch Screen Resolution 4096×4096 Touch Points 10 points Minimum Touch Item ≥5mm Response Time ＜5ms Surface Hardness Mohs 7 degree Cursor Speed ≥180/ms Transmittance ≥98% D , urability Unlimited ≤5mm explosion protection toughened glass for the writing surface,scratch- resistant anticollison PC Main Board CPU Android, I3/ I5/ I7 Processor Speaker 10W×2 Hard Drive 8G/120G SSD Memory 2G/4G USB connectors 4 pcs Built-in wifi 2.4GHz & 5GHz IEEE 802.11 a/b/g/n/ac Interface HDMI,VGA,USB Integra , ted design, modular design for the main panel, detachable, easy for the maintain and upgrade Accessories AC power cable Operating System WIN10 / Android/ Linux System Products Description 10-points touch, multiple software 1. 100% test performance before delivery 2. With the advancing touch technology, our product is applied with original module LG display. 3. Our company was recognized by Chinese Government as National High-Tech Enterprise

ER-QA-03A: 1. Bias repeatability: 10-50μg; 2. Scale factor repeatability: 15-50ppm; 3. Class II non-linearity repeatability: 10-30μg/g2. Introduction ER-QA-03A High Performance Quartz Accelerometer with high reliability is mainly used in inertial measurement and test systems in the aerospace and aviation fields. It can carry out static test and dynamic test, which is a standard vibration sensor. Features The high performance quartz flexible accelerometer uses high-quality quartz crystals to achieve high precision acceleration measurement with extremely high reliability and stability. Its special flexible construction enables it to adapt to high acceleration applications under various environmental conditions, such as high temperature, high pressure and high vibration environments. Application In addition to being widely used in aerospace and military fields, high performance quartz flexible accelerometers are also widely used in automotive, medical and scientific research fields. In the field of scientific research, they can be used to study earthquakes, crustal movements, cosmology, and microgravity environments.

Minimum Order: 1 bags

Dear Sir/Madam. Are you a businessman or woman? Are you in any financial stress or do you need funds to start up your own business? bullsindia187@gmail.com

As a leading manufacturer of angle pattern globe valves in China, our products adhere to international standards including BS 1873, API 602, ASME B16.34, and DIN 3202. Available in a comprehensive range from 1/2 to 24 inches, catering to DN15 to DN600 specifications, our valves cover pressure ratings from 150 to 2500 LB and PN16 to PN420. Crafted from top-quality materials such as ASTM A217 and ASTM A351, our angle pattern globe valves are designed to meet diverse requirements for reliable performance across various applications. Angle Pattern Globe Valve The media flow direction of the angel globe valve is not in the same direction and usually at an Angle of 90°. It’s characterized saving elbow and convenient to operate and can be installed in the bend of the pipeline system. The angle globe valve have another name is angle stop valve, OS & Y Type, Rising Stem, Bolted Bonnet Design, inlet of the angle type globe valve and outlet of the angle type globe valve are perpendicular to each other, so the angle type globe valve on can used for vertical installation. Angle Type Globe Valves-Features The design of a 90° angle is characterized by saving elbow and convenient to operate; The resistance coefficient of fluid for angle globe valve is higher than conventional globe valves. The angle globe valve OS & Y Type, Rising Stem, Bolted Bonnet. Angle Type Globe Valves-Specifications and Materials Design & Manufacture: BS 1873, API 602, ASME B16.34 or DIN 3202 P.T Ratings: ASME B16.34 Face to Face dimensions: ASME B16.10 RF: ASME B16.5 Butt-weld Ends: ASME B16.25 Valves Marking: MSS SP-25 Inspect & Test: API 598 Size Range: 1/2 Inch - 24 Inch, DN15 - DN600 Bolted Cover, Outside Screw and York Pressure Rating: Class 150 LB - Class 2500 LB, PN16 - PN420 Body Material: ASTM A217 WC6, WC9, C5, C12, C12A, CA15, ASTM A351 CF8, CF8M, CF3, CF3M Carbon Steel, Low Carbon Steel, Alloy Steel, Stainless Steel, Duplex & Super Duplex Steel, and Special Materials in Monel, Aluminum Bronze etc. Trim Materials: SS 304, SS 304L, SS 316, SS 316L, 13% Cr Steel, ASTM A182 F11, F22 etc. Actuators can be equipped with Handwheel, Gear Devices, Electric, Pneumatic or Hydraulic etc. Optional Globe Check, Bypass system, Live Loading Packing & O-ring Seal

Minimum Order: 1 bags

Discover our Through Conduit Parallel Disc Slab Gate Valve, sourced from a reputable supplier in China. This valve complies with API 600, API 6D, and ASME B16.34 standards, offering reliability and performance. Available in sizes ranging from 2 to 48 inches and with class ratings of 150-1500 LB, it is crafted from carbon and stainless steel. Trust our commitment to quality for your through conduit parallel disc slab gate valve needs. I. Through Conduit Gate Valve Introduction The through conduit gate valve is a sliding valve whose gate is a parallel gate. The shutter can be a single shutter plate or a double shutter plate with a deployment mechanism in between. The push force of the gate to the valve seat is controlled by the pressure of the medium acting on the floating gate or floating valve seat. If the through conduit gate valve is a dual shutter through conduit gate valve, the spreading mechanism seen in the two shutters can compensate for this pressure. 1. The valve seat adopts the floating valve seat structure with o-ring sealing and pre-tightening force, and the inlet and outlet of the flat gate valve are sealed in both directions; in addition, the switching torque of this structure is 1/2 of that of the ordinary valve, and the valve can be easily opened and closed. 2. When the flat gate valve is fully opened, the channel is smooth, the flow resistance coefficient is extremely small, and there is no pressure loss, and the pipeline can be cleaned with a hair ball 3. The filling material structure with self-sealing ability is adopted, which does not need to be adjusted frequently, the switch is extremely light, and the sealing performance is reliable. The auxiliary sealing grease injection structure is set at the filling material, the sealing performance is absolutely reliable, and zero leakage is truly achieved; It solves the disadvantage that the general valve packing is most likely to leak. 4. When the through conduit gate valve is closed, the high pressure in the inner cavity can be automatically eliminated, which is convenient to use. 5. The fully enclosed structure has good protection performance and can meet all- weather requirements. Ⅱ. Applicable Occasions for Through Conduit Gate Valve 1. Class 150 - 900 LB/PN1.0~16.0 MPa (working temperature is -29~121 ℃) oil and natural gas transmission pipeline. The flat gate valve with pilot port also facilitates cleaning of the line. 2. Refined oil transportation line and storage and transportation equipment. 3. Oil and natural gas extraction wellhead devices, that is, valves for oil extraction machines. 4. The flat gate valve has piping for the medium of suspended particles. 5. City gas pipeline. 6. Water works.

Minimum Order: 1 bags

Introducing our High Pressure Forged Steel Trunnion Ball Valve, sourced from a reliable supplier. This valve is designed to meet API 6D, ASME B16.34, and DIN 3357 standards, making it suitable for high-pressure applications. Available in sizes ranging from 2 to 48 inches, it is engineered for Class 1500 LB and PN250 pressure ratings. The valve is crafted from durable materials, including Carbon Steel, Stainless Steel, and Alloy Steel, ensuring resilience in various environments. High-pressure forged steel ball valve is mainly used for long distance pipeline transportation of oil and natural gas and urban gas pipeline system. Due to the unique characteristics of the long distance pipeline valve, the design has fully taken into account its ability to withstand pipeline stress, as well as safety, weather resistance, long-term use of reliable sealing. Forged Steel Trunnion Ball Valve is usually built by 3-piece body, suitable for various kinds of pipelines, Class 150-4500 LB, PN16-PN720, JIS 5K-JIS 40K, is used to cut off or turn on the pipeline medium, can be operated by worm gear, manual, pneumatic actuator, electric driver, the connection type includes RF Flange, RTJ Flange, Butt welding, Grayloc, etc. SIZE RANGE AND PRESSURE CLASS Size Range: 2 Inch-48 Inch (DN50-DN1200) Pressure Range: Class 150 LB- 2500 LB (PN16-PN420) DESIGN STANDARDS Design / Manufacture: API 6D, ASME B16.34, DIN 3357, EN 13709, GB/T 12237, BS 5351, JIS B 2071 Face to Face Length (Dimension): MFG, API 6D, ASME B16.10, EN 558-1, DIN 3202, JIS B 2002 Flanged Dimension: ASME B16.5, EN 1092-1, BS 4504, DIN 2501 Flanged to ASME B16.5 (2 Inch-24 Inch) and ASME B16.47 Series A / B (26 Inch and above). Butt Welding Ends: ASME B16.25, EN 12982, GB/T 12224 Testing: API 598, API 6D, EN 12266-1, EN 1074-1, ISO 5208, DIN 2401, JIS B 2003. TECHNICAL FEATURES Split body, forged steel, side entry design. 3-piece bolted construction permits disassembly in the field for repairs Stem separated from the ball, no side load on the stem Tight shut-off sealing mechanism Explosive decompression-resistant seal 3 Mil Nickel plating for trim parts (Ball, Seat Ring) Trunnion mounted ball for ease of operation at high pressure (Post and Plate designs) Double Block & Bleed Capability Fire Safe Design Multiple Stem Sealing Double Isolation & Bleed (DIB) Design Available Valve cavity pressure relief (SPE Seats) Built-in sealant injection system for emergency seat & stem seal Anti-provision Design Anti-Static Device Back-seated blowout proof stem RPTFE, DEVLON, PEEK standard Plastic seat inserts Acid Gas and High H2S/CO2 applications

Minimum Order: 1 bags

Stainless steel plate is a modern and versatile metal material used in a variety of applications. Typical uses include: construction, manufacturing projects, food service processing, shipbuilding, chemical equipment, marine protection, etc. Also, it has the features of good toughness, enhanced corrosion resistance, a smooth surface, and a long lifespan. That’s why it is popular among lots of customers all over the world. Our stocks of stainless metal plates are available in popular sizes, thicknesses, finishes, and grades like 304, 316, and 430. Welcome to contact us for more details now!

Minimum Order: 1 bags

Transparent Clear Empty Eco Friendly Round Plastic Clear Tube Packaging For Gift with round end We are a profession manufacture and exporter, engaging in HDPE,PVC, PPR, PP pipe and fittings. We have been doing plastic production for more than 12 years, with a professinal team of production, R&D and sales department. +Quick Delivery: within 30 days ,  for one 20ft container.  +Competitive Pr , ice  + Good Quality: ISO/UL certificat , e approval +Best Service: fast delivery, s , trong package, good price, timely and ,  ef , fective communication +Powerful Solution: fa , st and effective solution to problem

Minimum Order: 1000

Transparent clear round packing PVC tube Plastic wrapped round tube We are a profession manufacture and exporter, engaging in HDPE,PVC, PPR, PP pipe and fittings. We have been doing plastic production for more than 12 years, with a professinal team of production, R&D and sales department. +Quick Delivery: within 30 days ,  for one 20ft container.  +Competitive Pr , ice  + Good Quality: ISO/UL certificat , e approval +Best Service: fast delivery, s , trong package, good price, timely and  ef , fective communication +Powerful Solution: fa , st and effective solution to problem

Minimum Order: 1000

High Quality Transparent Clear Tube Custom Plastic Pet Candy Tube Plastic Tube With Round Bottom We are a profession manufacture and exporter, engaging in HDPE,PVC, PPR, PP pipe and fittings. We have been doing plastic production for more than 12 years, with a professinal team of production, R&D and sales department. +Quick Delivery: within 30 days ,  for one 20ft container.  +Competitive Pr , ice  + Good Quality: ISO/UL certificat , e approval +Best Service: fast delivery, s , trong package, good price, timely and  ef , fective communication +Powerful Solution: fa , st and effective solution to problem

Minimum Order: 1000