Offers to Sell

FLUKE 17B+ digital multimeter. FLUKE 15B+ digital multimeter. FLUKE 15B+/17B+ high precision temperature frequency auto multifunction digital multimeter for Mobile Phone repair. Product Features: Faster response Greater capacitance range: 0.01nF ~ 1000μF The more bright: Add white LED backlight Larger screen: Larger than the original 1.5 times Product Specification: Maximum Voltage between any Terminal and Earth Ground: 1000 V Display(LCD): 4000 counts,updates 3/sec Battery Type: 2 AA,NEDA 15A, IEC LR6 Battery life: 500 hours minimum(50 hours in LED Test mode without load. The hours with load depends on the type - of LED under test) Operating Temperature: 0 deg to 40 deg Storage Temperature: -30 deg to 60 deg Operating Humidity: Non-condensing≤90%at 10deg to 30deg;≤75% at 30deg to 40deg Operating Humidity,40MC Range: ≤80% at 10deg to 30deg;≤70% at 30deg to 40deg Operating Altitude: 2000m Storage Altitude: 12.000m Temperature Coefficient: 0.1×(specified accuracy)/deg(<18deg or > 28deg) Fuse protection for current inputs: 440 mA,1000 V Fast Fuse, Fluck specified part only. 11A,1000v Fast Fuse, Fluke specified part only. Size(H×W×L): 183×91×49.5(mm) IP Rating: .IP 40 Safety: .IEC 61010-1, IEC61010-2-030 600V CAT Ⅲ,1000V CATⅡ，Pollution Degree 2 Electromagnetic Environment: IEC 61326-1:Portable Class A Equipment(Industrial Broadcasting and Communication Equipment) Function Range Accuracy : AC Volts: 400mV / 4V / 40V / 400V / 1000V, +/-3.0+3, 0.1Mv to 1,000V DC Volts: 400mV / 4V / 40V / 400V / 1000V, +/-1.0+10, 0.1Mv to 1,000V AC Current: 400uA / 4000uA / 40mA / 400mA / 4A / 10A, +/-1.5%+3 ,0.1UA to 10A DC Current: 400uA / 4000uA / 40mA / 400mA / 4A / 10A, +/-1.5%+3 ,0.1UA to 10A Capacitance: 50nF/ 200Nf / 2Uf / 20Uf / 200Uf / 20Mf ,+/-2%+5, 0.01nF to 100uF Resistance: 400 / 4K / 40K / 400K / 4M / 40M Ohm, +/-0.5%+3, 0.1 ohm to 40Mohm RANGE VOLTS AC 0.1Mv to 1,000V RANGE VOLTS DC 0.1Mv to 1,000V RANGE AC CURRENT 0.1UA to 10A RANGE DC CURRENT 0.1UA to 10A RANGE RESISTANCE 0.1 ohm to 40Mohm RANGE CAPACITANCE 0.01nF to 100uF VOLTAGE AC 400mV / 4V / 40V / 400V / 1000V, +/-3.0+3 VOLTAGE DC 400mV / 4V / 40V / 400V / 1000V, +/-1.0+10 RESISTANCE 400 / 4K / 40K / 400K / 4M / 40M Ohm, +/-0.5%+3 CAPACITY 50nF/ 200Nf / 2Uf / 20Uf / 200Uf / 20Mf ,+/-2%+5 CURRENT AC 400uA / 4000uA / 40mA / 400mA / 4A / 10A, +/-1.5%+3 CURRENT DC 400uA / 4000uA / 40mA / 400mA / 4A / 10A, +/-1.5%+3 Package List : 1pcs x Original Fluke 15B+ / 17B+ digital multimeter 2pcs x Test lead lines 1pcs x User Manual

Minimum Order: 1 bags

MECHANIC MR12 Max 18 in 1 Motherboard Fixture for Phone 6 6S 7P 8P X XS 11 12 Mini 12 Pro Max ogic Board BGA Repair Tool, Double-sided PCB Soldering Holder. Features: 1. Specially Designed for Phone 6/6P/6S/6SP/7/7P/8/8P/XR/X/XS/XS MAX/11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 Mini. 2. New Depressed Buckle Design, double-sided positioning design. 3. Split Combination Structure. The positioning module and the base plate can be separated

Minimum Order: 1 bags

Sunshine DT-17N 35/6 automatic digital multimeter for mobile phone repair, LCD digital multimeter intelligent current resistance voltage tester test meter instrument Product Description : DT-17N is 35/6 automatic digital instrument, is a stable performance, high precision, high reliability; With battery-driven automatic digital multimeter, the instrument adopts 21mm high LCD display, clear reading; About 15 seconds delay backlight, high pressure alarm and overload protection. It will more convenient to use. This series of instruments can be used to measure the DC voltage and AC voltage DC current and AC current resistance, capacitance diode, temperature, on-off test. True RMS measurement, LED high-voltage output measurement and frequency parameters is a superior performance instrument, is a ideal tool for the laboratory, factory, radio enthusiasts. Product Features : Automatic identification of gear position, no need to adjust gear position Temperature measurement method ( 0-1000℃ ) Temperature of liquid and solid Automatic horizontal display Double integral A/D conversion The sampling rate is approximately 3 times per second It can be measured by adjusting it to a thermometer, and there are two ways to measure it, Fahrenheit and Celsius. Because the temperature transfer process will be lost, there will be a small error. Package includes : 1pcs x Sunshine DT-17N 35/6 Auto Multimeter

Minimum Order: 1 bags

Universal PCB Board Holder Stainless Steel Soldering Jig Fixture with 6pcs Magnetic Pins for Phone Motherboard Welding Repair Tool Description : Universal small circuit board PCB holder, stainless steel jig fixture with 6pcs magnetic pins for microscope soldering platform. You can easily hold the by the point or clamp the board by the groove, easy and convenient to use. The pin with magnet at the bottom,ensures it tightly fixed on the platform. The groove fits for 0.2-1.8 mm thick board, perfect for PCB board with different thickness.

Minimum Order: 1 bags

Amaoe IP12 4-in-1 Middle Layer Reballing Platform for Phone 12/12 Pro/12 Pro Max/12 mini. Amaoe middle frame BGA reballing stencil platform for Phone 12 series motherboard soldering repair. AMAOE middle layer tin planting plantform For Phone 12/Pro/Max/mini/ middle layer poisitioning board/stencil.

Minimum Order: 1 bags

PHONEFIX upgrade high temperature PCB Board Holder Fixture for precision circuit board motherboard soldering repair, 2+1 Axis Rotatable Screws Motherboard Fixture Phone Repair Double Axis PCB Holder Material: Aluminum alloy, high temperature resistance Mobile phone motherboard precision comprehensive 2+1 Axis motherboard repair holder fixture, precision circuit board motherboard fixture holder soldering positioning platform. Multi-functional phone motherboard holder fixture, precision IC positioning platform Feature: Double axis + single axis (3 Rotatable Screws), 2+1 rotation axis Aluminum alloy High temperature resistance

Minimum Order: 1 bags

Structural features: ◆ Adopting the world's leading transmission control system, only need to input paper size system auto-tuning. ◆ Computerized high-speed fitting, up to 12,000 pieces per hour. ◆ Chuanliu-type air supply head, with four sets of forward nozzles and four sets of suction nozzles. ◆ Feida Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker ◆ Use multiple sets of electric eyes to know the advance position of the bottom line, and make the servo motor on both sides of the face paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth. ◆ Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records. ◆ Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling. Parameters: Model ZGFM1700 Max size 1700*15700 Min size 360*380 Paper 150-800g Bottom paper ≤10mm ABCDEF corrugated board Max speed 12000pcs/h Power 15kw Accuracy ±1mm 1. Product description 1.1 Structure: A. Upper Paper Feeder: It can send stacks of 150-800gsm paper from above. B. Bottom feed: It can send 0.5~1Omm paperboard from below. C. Gluing mechanism: The glued water can be applied to the fed paper. D. Regulatory organization - Fits the two papers according to the set tolerances. E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section 1.2 function: The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes. 1.3 Principles: The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product. Paste paper --- 180 ~ 800g/m thin paper, cardboard. Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board. Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.

PRODUCT DESCRIPTION Professional Ice Maker Industrial 9T/24h Cube Ice Plant Making Machine factory/Restaurant/Shop Feature 1. Sufficient output, up to 100% rated or more 2. Fully automatic control 3. The output can be customized, up to 10 tons 4. Customizable non-standard voltage 5. Ice tray size can be customized 6. Self-contained ice storage and ice delivery screw 7. Color touch screen + PLC control, the whole process can be monitored 8. Air and cold water cooling can be customiz ed, the default water cooling 9. Environmentally friendly R404a refrigerant 10. Multiple compressor brands are optional Model output (kg) voltage power (w) refrigerant ice size(L*W*Hmm) machine size(L*W*Hmm) BMC-2T 2000 380v/3P/50/Hz 8.73kw R404A/R22 22*22*22 1500x1430x2070 BMC-3T 3000 380v/3P/50/Hz 15.45kw R404A/R22 22*22*22 1800x1430x2070 BMC-4T 4000 380v/3P/50/Hz 22.95kw R404A/R22 22*22*22 2100x1430x2070 BMC-5T 5000 380v/3P/50/Hz 27.75kw R404A/R22 22*22*22 2400x1430x2070 9T/24h Industrial Ice Cube Machine Automatic Commercial Ice Machine For Home / Restaurant / Shop / Drinking / Bar 0 9T/24h Industrial Ice Cube Machine Automatic Commercial Ice Machine For Home / Restaurant / Shop / Drinking / Bar 1

1.Battery management system training bench; original automobile power battery pack is installed to provide power for the whole system; 2.Charging system training bench; it is equipped with high-voltage control box, DC/DC converter, car charger, low-voltage battery, fast charging inerface, slow charging interface, etc., which is the charging entrance of power battery pack. 3.Drive system training bench; install a motor controller and driver, the automobile control unit, the accelerator pedal, gearshift and combination instrument, diagnostic interface, brake system, colling system, etc., can realize the drive motor acceleration and deceleration, working condition of forward, reverse, etc, the original car instrument can display the current motor speed, wheel speed, battery and other parameters in real time. 4.Air conditioning system training bench; equipped with air conditioning duct assembly evaporation box, condeser, air conditioning compressor, air conditioning pipeline, air conditioning controller, ect., it render the refrigeration and heating functions of the air conditioning system of electric autombiles 5.Steering system training bench;equipped with automobile front axle, tire, steering machine, steering wheel, steering control unit, ect., which render the function display of electric power steering.

Minimum Order: 1 bags

WLL series CNC Spinning and Turning Machine Product Description WLL series CNC metal spinning machine(Single Roller) is especially developed to spin lamps, lamps, art wares，kitchen wares and auto fittings. It has many patents issued by the State Intellectual Property Office.This machine is practical, professional and strong. It has high production efficiency and can complete horn, bucket, cone type, parabolic products. It can also process threading, trimming, flanging and rolling at the same machine tool. The machine can spin many materials such as carbon steel, stainless steel,aluminum and copper etc. It has solved the traditional problems such as lack of skilled workers. With advanced digital control, it is easy to operate. The machine can improve the production efficiency, machining accuracy and saving the cost of human resources. It is the ideal processing machine for light, automobile, military, mechanic and other manufacturing industries. Model WLL-SRS350 Amount of Rollers 1+ Max.Diameter of Material Φ350 mm Max.Length of Work Piece 400 mm Thickness of Work Piece 0.5-2.0 mm(Aluminum,Copper) 0.5-1.2 mm(Carbon Steel) 0.5-1.0 mm(Stainless Steel) X Trave 300 mm Z Trave 380 mm Spindle Speed 4000 rpm Travel of Tailstock 300 mm Amount of Tools 2+2/ Optional Main Motor Power 3.7 kw Servo Positioning Accuracy 0.01 CNC Metal Spinning Lathe Machine｜Spin Forming Machine 1. It could also be equipped with manipulator which could do the automatic loading and unloading.  2. The machine is very stable with mature technology and now is highly recognized by customers from all over the worlds. 3. It can also process threading, trimming, flanging and rolling at the same machine tool. The machine can spin many materials such as carbon steel, stainless steel, aluminum and copper etc.  4. It has solved the traditional problems such as lack of skilled workers. With advanced digital control, it is easy to operate.

Gang Type CNC Lathe CK46 Product Description The Leichman CNC machine tool control system adopts Taiwan SYNTEC system, and other CNC systems are optional. The bed is inclined at 30°(CK46) / 45°(CK36), and the large carriage and the tool rest are placed obliquely, which makes the operation and chip removal of the machine tool very convenient. Item Unit CK36 CK46 Capacity Max swing over bed mm 400 450 Max cutting diameter mm 350 360 Max machining dia.(disk) mm 135 135 Max machining dia.(shaft) mm 220 220 Travel X axis travel mm 750 950 Z axis travel mm 270 290 Precision Spindle runout mm 0.004 0.004 X/Z axis reposition precision mm 0.002 0.002 Body structure Slant bed degree 45 45 Slant Bed Gang-Type CNC Lathe｜CNC Revolver Lathe 1. The base and the bed are integrally cast iron, which has strong shock resistance and is not easy to deform. 2. The appearance design of the CNC Revolver Lathe machine tool is beautiful, and it takes up less space. 3. The main shaft flange can be directly installed with a three-jaw self- centering hydraulic chuck or other elastic chuck. 4. Work piece clamping method: hydraulic. 5. The hydraulic supply unit of the machine tool has an enlarged fuel tank, better heat dissipation, and more stable work. 6. The X-axis and Z-axis adopts high-rigidity linear slides, and the calculation of the optimal span between the track and the track is achieved.  7. Low resistance, high rigidity, high precision, displacement speed up to 27m/min, improve work efficiency and shorten processing time.

Turning and Milling CNC Lathe CK46DY8 Product Description The CNC machine bed is integrally cast iron, and the machine bed is inclined at 30°, which makes the operation of the machine tool and chip removal more convenient. The X-axis and Z-axis adopt high-rigidity linear rails, and the optimized span between the rail and the rail low resistance, high rigidity, high precision and displacement speed up to 24m/min, improve work efficiency. Item Unit CK46DY8 Capacity Max swing over bed mm 420 Max cutting diameter mm 300 Max cutting length mm 220 Travel X axis travel mm 800 Y axis travel mm 255 Z axis travel mm 360 Precision Spindle runout mm 0.004 Spindle index position accuracy ±0.002° X/Y/Z axis reposition precision mm 0.002 Integral casting bed Bed tilt angle 30° Y-axis series Turning and Milling Composite CNC lathe｜CNC Lathe Milling Machine 1. The transmission part of the machine tool adopts high-precision Japanese THK ball screw and high-speed linear rail from Japanese THK. 2. Leichman CNC Lathe Milling Machine can be equipped with a 4+4 integrated power head, Y-axis and C-axis functions; it can realize turning and milling combined processing, making complex product processing easier, reducing the trouble caused by secondary processing and improving product accuracy. 3. The main shaft adopts Taiwan high-precision main shaft which contains Swiss SKF precision bearings.

**[Zlebar vape][1]** Eco8019 Fashionable design Big pod capacity and battery capacity can provide over 2500 puffs Easy to use by draw-activated without button Blue lights under the bottom indicate well work of vape Vaping over 8 seconds timeout protection function Available in 16 flavors Zlebar vape Eco8019:16 flavors Vanilla Ice Cream 、Mango Ice、Cappuccino、Lime Pomelo、Cherry Ice、Strawberry Lychee、Cool Mint、Grape Ice、Mojito、Peach Ice、Watermelon Ice、Acaí Berry、 Raspberry Orange、Blue Raspberry、Pineapple Grapefruit、Passion Fruit Ice、 [1]: http://www.vapemens.com

Minimum Order: 1 bags

Turret CNC Lathe CKD52 Product Description The CNC Lathe machine tool control system adopts Taiwan SYNTEC system, and it can also be equipped with CNC systems produced by other companies according to user requirements. The base and bed of the machine tool are integrally cast iron, which has strong shock resistance and is not easy to deform. The bed is inclined at 30°, and the large carriage and tool post are inclined, which makes the operation of the machine tool and chip removal very convenient. The appearance design of the machine tool is beautiful, and it takes up little space. Item Unit CKD52 Capacity Max swing over bed mm 500 Max. machining diameter mm 480 Max. machining length mm 380 Travel X axis travel mm 250 Z axis travel mm 400 Precision Spindle runout mm 0.004 X/Z axis reposition precision mm 0.002 Spindle Spindle speed rpm 4000 Chuck diameter inch 8 Spindle nose A2-6 Spindle bore mm 63 Max bar diameter mm 52 Slant Bed CNC Turret Lathe with Tailstock｜CNC Lathe with X Z Axis The main shaft adopts a high-precision main shaft, which contains Swiss SKF precision main shaft bearings. The main shaft flange can be directly installed with a three-jaw self-centering hydraulic chuck or other elastic chuck. The transmission part of the machine tool adopts the high-precision Japanese THK ball screw and high-speed linear slide of the well-known Japanese THK 35- type. The X-axis and Z-axis adopt the high-rigidity linear slide, and the track and the track are optimized through calculation. Span, low resistance, high rigidity, high precision, displacement speed up to 24m/min, provide work efficiency and shorten processing time.