Offers to Sell

nner tube: White,oil resistant, thermoplastic layer. Reinforcement: R7：Synthetic fiber R8：Two layer Synthetic fiber Outer tube: Colorful, oil, abrasion and weather resistant, thermoplastic cover. Application: R7 is medium-pressure hydraulic lines. R8 is high-pressure hydraulic lines.

Minimum Order: 2000

The LYO Biopharmaceutical Freeze Dryer is produced using standardized manufacturing processes, reducing manufacturing costs and shortening production cycles while ensuring performance and reliability. The design of the freeze dryer prioritizes safety, versatility, reliability, and long service life while also ensuring the safety of users and the environment. The design is based on mature technology and employs high-quality materials and components widely accepted in the biopharmaceutical industry. Additionally, it utilizes advanced manufacturing techniques, ensuring that the equipment fully complies with cGMP standards. Equipment features: 1. The cabinet material is AISI 304 or AISI 316L, and the interior of the cabinet is designed with rounded corners to facilitate access and minimize dead corners. 2. All internal welds of the cabinet are treated and smoothed with surrounding materials. During partition manufacturing, materials are uniformly heated to avoid stress between independent welds, ensuring the smoothness of the shelves. 3. Low-viscosity silicone oil is used as the heat transfer medium, ensuring good temperature uniformity at extremely low temperatures on the shelves. 4. Main unit components are sourced from imported brands to ensure equipment quality. 5. Production follows ISO9001 quality management system, and the manufacturing process ensures full compliance with cGMP standards. 6. The PLC computer system controls all functions of the freeze dryer. Based on the process parameters and programs stored in memory, the PLC can complete the operation of the entire production system. The system is stable and secure. 7. 4Q certification documents can be provided, along with comprehensive training and services.

The LYO Biopharmaceutical Freeze Dryer is produced using standardized manufacturing processes, reducing manufacturing costs and shortening production cycles while ensuring performance and reliability. The design of the freeze dryer prioritizes safety, versatility, reliability, and long service life while also ensuring the safety of users and the environment. The design is based on mature technology and employs high-quality materials and components widely accepted in the biopharmaceutical industry. Additionally, it utilizes advanced manufacturing techniques, ensuring that the equipment fully complies with cGMP standards. Equipment features: 1. The cabinet material is AISI 304 or AISI 316L, and the interior of the cabinet is designed with rounded corners to facilitate access and minimize dead corners. 2. All internal welds of the cabinet are treated and smoothed with surrounding materials. During partition manufacturing, materials are uniformly heated to avoid stress between independent welds, ensuring the smoothness of the shelves. 3. Low-viscosity silicone oil is used as the heat transfer medium, ensuring good temperature uniformity at extremely low temperatures on the shelves. 4. Main unit components are sourced from imported brands to ensure equipment quality. 5. Production follows ISO9001 quality management system, and the manufacturing process ensures full compliance with cGMP standards. 6. The PLC computer system controls all functions of the freeze dryer. Based on the process parameters and programs stored in memory, the PLC can complete the operation of the entire production system. The system is stable and secure. 7. 4Q certification documents can be provided, along with comprehensive training and services.

Inner tube: Black, oil resistant, synthetic rubber to High Temperature Reinforcement: Two braids fiber layer. Outer tube: Wrapped Surface Black, oil, abrasion and weather resistant, synthetic rubber. Application: Low-pressure hydraulic lines.

Minimum Order: 1000

The LYO Biopharmaceutical Freeze Dryer is produced using standardized manufacturing processes, reducing manufacturing costs and shortening production cycles while ensuring performance and reliability. The design of the freeze dryer prioritizes safety, versatility, reliability, and long service life while also ensuring the safety of users and the environment. The design is based on mature technology and employs high-quality materials and components widely accepted in the biopharmaceutical industry. Additionally, it utilizes advanced manufacturing techniques, ensuring that the equipment fully complies with cGMP standards. Equipment features: 1. The cabinet material is AISI 304 or AISI 316L, and the interior of the cabinet is designed with rounded corners to facilitate access and minimize dead corners. 2. All internal welds of the cabinet are treated and smoothed with surrounding materials. During partition manufacturing, materials are uniformly heated to avoid stress between independent welds, ensuring the smoothness of the shelves. 3. Low-viscosity silicone oil is used as the heat transfer medium, ensuring good temperature uniformity at extremely low temperatures on the shelves. 4. Main unit components are sourced from imported brands to ensure equipment quality. 5. Production follows ISO9001 quality management system, and the manufacturing process ensures full compliance with cGMP standards. 6. The PLC computer system controls all functions of the freeze dryer. Based on the process parameters and programs stored in memory, the PLC can complete the operation of the entire production system. The system is stable and secure. 7. 4Q certification documents can be provided, along with comprehensive training and services.

nematic liquid crystals PDLC E7 693227-30-4 18years of PDLC nematic liquid crystals production experience. Established in 2007, Qingdao QY Liquid Crystal Co., Ltd. is a leading manufacturer specializing in liquid crystal materials and Nematic liquid crystals in China, especially the liquid crystals for making PDLC smart film. Our factory has the R & D center and big production base, we also cooperate with a number of universities in researching the new product and new technology. Our experienced R&D team have the strong interest to research new goods as request. Our liquid crystal is mainly used to make PDLC mixture, PDLC switchable film and high grade of LC display.

Minimum Order: 20 square metres

Inner tube Black, oil resistant, synthetic rubber. Reinforcement Two braid of high-tensile steel wire. Outer tube Black, oil, abrasion and weather resistant, synthetic rubber. Wrapped Surface or Smooth Surface. Application High pressure hydraulic lines. Mine hydraulic support, oilfield extraction machinery, mine/ road/ construction machinery.

Minimum Order: 1000

The LYO Biopharmaceutical Freeze Dryer is produced using standardized manufacturing processes, reducing manufacturing costs and shortening production cycles while ensuring performance and reliability. The design of the freeze dryer prioritizes safety, versatility, reliability, and long service life while also ensuring the safety of users and the environment. The design is based on mature technology and employs high-quality materials and components widely accepted in the biopharmaceutical industry. Additionally, it utilizes advanced manufacturing techniques, ensuring that the equipment fully complies with cGMP standards. Equipment features: 1. The cabinet material is AISI 304 or AISI 316L, and the interior of the cabinet is designed with rounded corners to facilitate access and minimize dead corners. 2. All internal welds of the cabinet are treated and smoothed with surrounding materials. During partition manufacturing, materials are uniformly heated to avoid stress between independent welds, ensuring the smoothness of the shelves. 3. Low-viscosity silicone oil is used as the heat transfer medium, ensuring good temperature uniformity at extremely low temperatures on the shelves. 4. Main unit components are sourced from imported brands to ensure equipment quality. 5. Production follows ISO9001 quality management system, and the manufacturing process ensures full compliance with cGMP standards. 6. The PLC computer system controls all functions of the freeze dryer. Based on the process parameters and programs stored in memory, the PLC can complete the operation of the entire production system. The system is stable and secure. 7. 4Q certification documents can be provided, along with comprehensive training and services.

Micronized wax is primarily used to enhance the scratch resistance, smooth hand feel and anti-blocking properties of inks and coatings, suitable for solvent-based ink and coating systems. ‌ Key Functions Micro-wax reduces surface friction in printed materials through its regular spherical particle structure. Its uniform fineness facilitates easy dispersion with pigments, allowing direct incorporation into inks or coatings at room temperature without requiring additional solvents or heating. ‌ Application Areas ‌Inks: Suitable for solvent-based flexographic inks, packaging gravure inks, and offset inks. Improves sliding friction on printed surfaces and reduces printing friction. ‌ ‌Coatings: Employed in thin-film coatings to enhance paint film abrasion resistance and slip properties while preventing adhesion and soiling. ‌ ‌Plastics Processing & Cosmetics: Beyond inks and coatings, also utilised in plastics processing and cosmetics to boost wear resistance and tactile comfort.

Inner tube Black, oil resistant, synthetic rubber. Reinforcement One braid of high-tensile steel wire. Outer tube Black, oil, abrasion and weather resistant, synthetic rubber. Wrapped Surface or Smooth Surface. Application Medium pressure hydraulic lines. Mine hydraulic support, oilfield extraction machinery, mine/ road/ construction machinery.

Minimum Order: 1000

The LYO Biopharmaceutical Freeze Dryer is produced using standardized manufacturing processes, reducing manufacturing costs and shortening production cycles while ensuring performance and reliability. The design of the freeze dryer prioritizes safety, versatility, reliability, and long service life while also ensuring the safety of users and the environment. The design is based on mature technology and employs high-quality materials and components widely accepted in the biopharmaceutical industry. Additionally, it utilizes advanced manufacturing techniques, ensuring that the equipment fully complies with cGMP standards. Equipment features: 1. The cabinet material is AISI 304 or AISI 316L, and the interior of the cabinet is designed with rounded corners to facilitate access and minimize dead corners. 2. All internal welds of the cabinet are treated and smoothed with surrounding materials. During partition manufacturing, materials are uniformly heated to avoid stress between independent welds, ensuring the smoothness of the shelves. 3. Low-viscosity silicone oil is used as the heat transfer medium, ensuring good temperature uniformity at extremely low temperatures on the shelves. 4. Main unit components are sourced from imported brands to ensure equipment quality. 5. Production follows ISO9001 quality management system, and the manufacturing process ensures full compliance with cGMP standards. 6. The PLC computer system controls all functions of the freeze dryer. Based on the process parameters and programs stored in memory, the PLC can complete the operation of the entire production system. The system is stable and secure. 7. 4Q certification documents can be provided, along with comprehensive training and services.

Box Compression tester is used for measuring the ability of packaged freights and containers, made of metal, wood, corrugated fibreboard, solid fiber cardboard, plastics, etc. or of combination of these, to resist external compressive forces corrugated or containers. The test can be used to assess the performance of a package in terms of its strength or of the protection it offers to its contents when it is subjected to compressive forces or stacking.  Discover the reliable and affordable box compression test solutions with our state-of-the-art box compression tester. Our box compression test machine, including the advanced box compression testing machine and box compression strength tester, follows precise box compression test methods. The instrument has three independent modes of operation: 1. Strength test: measure the ultimate compressive strength and deformation of the box; 2. Fixed value test: The overall performance of the box can be tested according to the set pressure and deformation. 3. Stacking test: Simulate the stacking status of the warehouse, and carry out the stacking test of different conditions. Application This paper test method covers compression tests on shipping containers (for example, boxes and drums) or components, or both. Shipping containers may be tested with or without contents. The procedure may be used for measuring the ability of the container to resist external compressive loads applied to its faces, to diagonally opposite edges, or to corners This test method covers testing of multiple containers or unit loads, in addition to individual shipping containers, components, materials, or combination thereof. Specifications of Box Compression Tester Item Parameters Test Range 0.25KN, 0.5KN, 1KN, 2KN, 5KN, etc Resolution 0.01N Deformation error  ≤±1mm Plate parallelism  ≤1mm Loadcell Error ±1% Test Speed 5~300mm/min Return Speed 100mm/min Compression Speed 10±3mm/min Stacking Speed 5±1mm/min Units N/Lbf /kgf Analysis  7-inch touchscreen with curve analysis and integrated thermal printing  Output RS232 (optional) Power  AC 220V 50Hz

Inclined Type Ball Tack Tester is equipped with the inclined plate of 20°, 30° or 40° inclined angle. The inclined plate is a smooth and flat one made of aluminum. A steel ball of various specifications is placed at the upper part of the inclined plane, followed in lower 100mm section is the approach table, where the ball can accelerate after released. The test sample is placed below the approached table in the next 100mm. The Rolling Ball Tack Tester is released and sticked at the test area. Test Principle of BTT-02 Inclined Type Ball Tack Tester The initial tack of the sample is tested through the adhesion of the adhesive tape to the steel ball when there is brief contact between the steel ball and the adhesive surface of the pressure-sensitive tape sample with a small pressure. It is suitable for testing the adhesion of adhesive tapes, labels, and other products to steel balls to test the initial tack of the sample. Gently release the steel balls from the starting point on the inclined plate. Record the biggest steel ball that can be stuck by sample. Repeat tests with the balls of adjacent numbers of that largest one to confirm if it’s that largest one to be stuck. The numerical value obtained from multiplying the nominal size of a ball is called the ball number. Record a result by the ball number. Further, record the angle of an inclined plate. BTT-02 Ball Tack Tester Specification Inclined Angle 0~60° Test Area Width 120mm Rolling Ball 1/32~1 inch Dimension 320x140x180mm LWH Weight 6kg

GFT-01 gelbo flex tester is also known as Flex Durability Tester, assesses how well materials such as films, composites, and coating films endure repetitive strain. It helps to create flex failure on samples so user can identify pinholes and permeation ability change in the sample structure. The importance of achieving strong flex crack resistance lies in reducing the risk of packaging developing holes during distribution. This is crucial for keeping the package intact throughout its journey, ensuring the contents inside remain protected. The tester plays a key role in evaluating the ability of materials to withstand repeated flexing, contributing to the overall durability and reliability of packaging in various industries. Advantages GFT-01 Gelbo Flex Tester is equipped with PLC control and a user-friendly HMI touch screen interface. It encompasses five standard test modes and incorporates four test stations, allowing users to easily transition between long and short stroke modes by the selectable test conditions A, B, C, D, and E. Additionally, the inclusion of a micro printer ensures convenient and efficient data output. Application:  GFT-01 Gelbo Flex Tester is normally used for high barrier materials in various industries due to their protective properties. Here's a list of such materials and their common usage in industries: 1. Metalized Films:    - Industries: Food Packaging, Pharmaceuticals    - Usage: Metalized films provide excellent barrier properties against moisture and oxygen, making them suitable for preserving the freshness of food items and pharmaceutical products. 2. Polyethylene Terephthalate (PET) Films:    - Industries: Electronics, Medical Devices    - Usage: PET films with high barrier coatings are used to protect electronic components from moisture and chemicals. In the medical industry, they are employed for sterile packaging.