Offers to Sell

BS Standard Cable Product Description Single core cables with solid or stranded copper conductors, PVC insulated, rated 450/750V conforming to SASO:55 specification Construction: Conductor Pla , in annealed circular copper conforming to IE , C:228, class 1 and 2 ( also available in aluminum conductors sizes 16 to 630 mm2). Insulation PVC type 5 to BS:6746  , rated 85°C, (PVC type 1 to BS:6746 rated  , 70 °C also available) Application: Typical applica , tions include building wiring, equipment wiri , ng, switching and distribution installations in conduits above or under plaster Features: Insulation adheres tig , htly to conductors yet strips easily, leaving conductor clean. PVC insulation has good electrical properties. Dimensions and Weights Conduct , or Insulation Packaging Cross sectional area Nominal Minimum number of wires Thickness Nominal Overall diameter Approx Net weight Approx B-Box, S-Spool C-Coil, D-Drum m m2   m m m m kg/km m 1.5 re 1 0.7 3.0 19 50/100 B/S 1.5 rm 7 0.7 3.2 19 50/100 B/S 2.5 re 1 0.8 3.6 30 50/100 B/S 2.5 rm 7 0.8 3.8 31 50/100 B/S 4 re 1 0.8 4.1 47 50/100 B/S 4 rm 7 0.8 4.3 48 50/100 B/S 6 re 1 0.8 4.6 66 50/100 B/S 6 rm 7 0.8 4.9 67 50/100 B/S 10 re 1 1.0 5.9 110 50/100 C 10 rm 7 1.0 6.3 113 50/100 C

8000 Series Aluminium Alloy Conductor SER Service Entrance Cable Product Description 8000 series aluminium alloy con , ductor is insulated with black XLPE. The insulated conductors  are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Construction: The stranded compacted 8000 series aluminium alloy conductor is insulated with black XLPE. The insulated conductors are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Application: Mainly used to convey power from the Service drop to the meter base to the distribution board. SEU can also be used in certain branch circuits as permitted by 1999 NEC. It is used in wet or dry locations. Rated Voltage：600V. Operating Temperature: Max permissible continuous operating temperature of conductor shall not exceed 90℃. Standard: UL 44 and UL 854,Federal Specification J-C-30B or other standards required by customers.

Material poverty can destroy your dignity throughout your life. The lack of orders can disrupt the cost plan of a hydraulic cartridge valve manufacturer. Spiritual poverty consumes your reincarnation for several lifetimes. The poverty of quality can tear apart all of a hydraulic cartridge valve manufacturer. Books are cheap, but that doesn't mean knowledge is cheap. Although reading may not necessarily lead to a bright future, it can make you speak with emotional intelligence and act with intelligence. Hydraulic cartridge valve manufacturers who control quality well may not necessarily make your orders soar, but they can reassure customers and also reassure themselves. Reading is the lowest threshold of nobility. Quality is the minimum threshold for a hydraulic cartridge valve manufacturer. The future of the hydraulic cartridge valve manufacturer may seem certain, but in reality, there is too much uncertainty. Life is like this, and manufacturing is also like this. Only by walking on thin ice and constantly maintaining respect for quality can we have a definite tomorrow. Hydraulic cartridge valve manufacturer AAK maintains a good upbringing, no matter where they are or who they are facing. This can distinguish AAK from other hydraulic cartridge valve manufacturers in China. Some people are already in their teens and have already become lethargic, while others are over sixty years old but still have a youthful aura, always retaining the passion and passion of youth, freely galloping in their own spiritual world. There is light in the eyes because there is still the initial kindness and integrity in the heart, which is enough to light up one's entire life. Hydraulic cartridge valve manufacturer AAK in China, on the road, has a shining eye and insists on quality. AAK HYDRAULIC CARTRIDGE VALVES (785) 2024-03-10

Minimum Order: 5 dozens

What is Colloidal Silica/ Silica Sol? Colloidal silica is a dispersion of amorphous silicon dioxide (silica) particles in water. These amorphous silica particles are produced by polymerizing silica nuclei from silicate solutions under alkaline conditions to form nanometer sized silica sols with high surface area. A charge is then induced on the silica nanoparticle surface that allows the silica particles to repel one another and form a stable dispersion, or colloid. Colloidal Silica Characters: Colloidal silicas are produced in a variety of grades that range in a number of factors. Particle size typically varies from 5nm to 40nm, and particle size distribution can vary from narrow to wide depending on the manufacturing process. Standard colloidal silica is stable at a pH from 8 - 10.5 and carries an anionic surface charge that is stabilized with sodium or ammonium. In certain grades, some of the silicon atoms in the silica particle are replaced with aluminate ions to allow for enhanced stability in a wider pH range, usually 3.5 - 10.5. Colloidal Silica Application: Densification of concrete, cement, and other materials. Fine retention in paper manufacturing. Enhanced bonding of waterborne adhesives. Improved surface friction and anti-slip properties. Wastewater filtration flocculant. Investment casting binding. Anti-soilant textile coatings.

N-METHYL PYRROLIDONE (NMP SOLVENT) (NMP) SOLVENT is a polar aprotic solvent , colorless liquids, that has the advantages of low toxicity, high boiling point,outstanding solvency, strong selectivity and good stability. It is widely used in purification of aromatic hydrocarbon extraction, acetylene, olefins, and diolefins and oil refining. 01) NMP is used in industrial cleaning, and it serves as a solvent for production of pesticides, engineering plastics, coatings, synthetic fibers, and integrated circuits. 02) NMP can also be used as an industrial cleanser, dispersant, dye, lubricant and antifreeze. 03)NMP is an excellent solvent, widely used in aromatics extraction, lubricating oil refining, acetylene enrichment, butadiene separation and synthesis gas desulfurization. NMP is used in gas desulfurization, lubricating oil refining, lubricating oil antifreeze, olefin extraction, and as a solvent for insoluble engineering plastics polymerization. NMP can be used in herbicide, to clean insulation materials, semiconductor industry precision instruments and circuit boards, to recycle PVC exhaust, as a detergent, dye supplement and dispersing agent. 04) NMP is used in mediums for polymerization reactions such as engineering plastics and aramid fiber 05).NMP is used as a polyvinylidene fluoride solvent and electrode auxiliary material for lithium ion batteries. Feel free to buy bulk n-methyl pyrrolidone (nmp solvent) in stock from professional n-methyl pyrrolidone (nmp solvent) manufacturers and supplier

Minimum Order: 20 square metres

　　NQKSF a factory specializing in rubber oil seals, provides durable high- temperature and high-pressure rubber oil seals. These seals are commonly used in machinery and equipment where oil is the medium. They serve as pressure system seals for welding, sleeve expansion, pipe joints, plugs, and mechanical devices, preventing leaks of oil, fuel, water, and other substances. Here are the details: 　　Material: Nitrile rubber (NBR) 　　Working Temperature: -40°C to 125°C 　　Model: Double-lip 　　Application: Suitable for oil cylinders, automobiles, and bearings 　　Properties: Corrosion-resistant and wear-resistant 　　Pressure Tolerance: Up to 0.03 MPa (0.3 kgf/cm²) 　　NQKSF is a reputable manufacturer with over 30 years of experience in producing and researching sealing components. Their products are widely used in various industries, including motorcycles, cars, ships, hydraulics, and mining machinery.

Minimum Order: 500

Dear sir/madam, This is peter from Luminatii Technology Co., Ltd in China. A company integrating R&D, manufacturing and sales of LED displays in one of the national high-tech enterprises. Our products are exported to 87 countries and regions, with a robust global sales and service network. Please feel free to contact me if you are intersted in us. whatsapp：+86 17360775285 WeChat：peterlin18588952897 ema , il：peter@luminatii.com web：https://luminati , i.com

Minimum Order: 1 bags

Disposable Pet Pad Product details: 1. Diamond-shaped diversion design quickly absorbs urine and keeps the surface dry and breathable. 2. Bottom PE leak-proof film with all-around lock design, preventing urine from leaking out. 3. Imported polymer wood pulp fibers can quickly absorb water and block urine. Product specifications: Material * 1st Layer: Non-Woven or Dry Mesh Cover * 2nd Layer: Tissue Paper * 3rd Layer: Fluff Pulp Blend Super Absorbent Polymer (SAP or GEL) * 4th Layer: Tissue Paper * 5th Layer: PE Film ( release paper can be added in the corner)

Minimum Order: 5000

This year's Spring Festival holiday, hydraulic cartridge valve manufacturer AAK has two team leaders who returned late due to family matters. Although it may have some impact on the subsequent production of hydraulic cartridge valve manufacturers, I can understand that they are 1,500 kilometers away from home. The workshop director is also very concerned about the production progress and has been feeling a bit emotional these days. Our new salesperson was frustrated at both ends and was scolded by the workshop director. He was also complained about by customers due to delivery time, and the new salesperson often complained in the workshop. Whether the managers of hydraulic cartridge valve manufacturers or the salesperson of hydraulic cartridge valve manufacturers, be an emotionless person and don't complain everywhere. Especially for those engaged in business, one should not be complacent, let alone have high expectations for any customer. Some things, you tell the wind, and the wind will also notify the entire forest. Many people are very concerned about face. If hydraulic cartridge valve manufacturers encounter problems, they should put down their face and actively seek help from others, and never work behind closed doors. At the same time, improve your shielding ability and don't get angry casually. Not only will it not solve the problem, but it will also harm yourself. It's your fault to take another look at anyone or anything that consumes energy. If the customer has misunderstandings about the manufacturers of hydraulic cartridge valves, firstly, restrain your desire to refute and learn to accept and praise. The quickest way to succeed is to replicate the achievements of others. Most big shots are like this, starting with learning from others and even plagiarizing them. Hydraulic cartridge valve manufacturer AAK, in the early days, followed SUN and HydraForce. But hydraulic cartridge valve manufacturer AAK has always understood over the years that AAK cannot become someone else, but to constantly surpass ourselves. Hydraulic cartridge valve manufacturers should often interact with customers who value quality, as they bring a positive magnetic field. The type of customer business that hydraulic cartridge valve manufacturers do determines their future height. The fastest way for a person to grow is to walk with excellent people. Meet people with high cognitive dimensions, they won't give you wealth. But everyone has a desire to share, and they will share their high-dimensional knowledge with you, which is the most valuable wealth. A person's maturity is not about understanding things, but understanding human nature. When talent cannot support your ambition, you should step out and study hard. I really like a saying, the farther you go, the more you see. In this lifetime, there are only a few people who you truly care about and they care about you at the same time. If hydraulic cartridge valve manufacturers can meet a few sincere customers, that's enough. This vast planet, with a sea of people in life, we can meet and talk to customers who share the same values, which can be seen as a community of shared destiny. You really need to cherish it. As long as you dare to think, dare to do, and be able to integrate knowledge and action, it will definitely make your life better and better. The road is walked out, not imagined. Thinking is always a problem, doing is the answer. Hydraulic cartridge valve manufacturer AAK has been on the road. AAK HYDRAULIC CARTRIDGE VALVES (784) 2024-03-09

Minimum Order: 5 dozens

Application A Heat Seal Tester is a device used in the packaging industry to evaluate the heat-sealing properties of various materials, such as films, laminates, and other packaging components. The heat seal strength and integrity of these materials are crucial to ensure the quality and effectiveness of packaging for products like food, pharmaceuticals, electronics, and more. The tester works by applying a certain heat and pressure to a sample of the material being tested for a certain time interval, simulating the conditions under which heat seals are formed in the packaging process. The heat, pressure, and time settings can be adjusted to mimic different sealing conditions, which allows manufacturers to determine the optimal parameters for achieving strong and consistent seals. The term "gradient" in Gradient Heat Seal Tester refers to the ability of the device to create a controlled temperature gradient across the sealing area. A Gradient Heat Seal Tester can also be understood as a Multi-Station Heat Seal Tester, which means tests can be run at different temperature settings simultaneously. This reduces the waiting time between tests and increases the overall efficiency of the testing process. Standards ASTM F2029-16(2021) :Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength Technical Features The key to a heat seal tester is its stability and accuracy in time, temperature, and pressure. GHS-01 Gradient Heat Seal Tester ensures good sealing results with our state-of-art design, and it can realize five groups of sealing temperatures simultaneously. 1. Both the upper and lower jaws are made of aluminum and independently heated so that heat loss is maximumly eliminated in sealing and temperature smoothness is ensured. 2. First class P.I.D. (proportional integral derivative) temperature controller realizes precise temperature control and efficient heating. 3. Combination of accurate timer and proximity sensor realizes simultaneous seal start time with jaw movement. 4. Unform sealing pressure by the three-way guided sealing bar. 5. User protection designs, such as anti-scald front cover, manual and foot switch, etc. 6. Seal jaw customization available in terms of dimension, shape, and sealing surface/patterns. 7. More gradient temperatures of upper and lower heating can be customized. Main Parameters Sealing Temp.: Ambient~250℃ Temp. Gradient: ≤20℃ Deviation: ±0.2℃ Sealing Time: 0.1S~9999H Sealing Pressure: 0.15~0.7 MPa Seal Jaws(mm): U: 40*10 (5PCS) L: 330 (1PCS) Gas Input: 0.7 MPa with Ф6 mm Pipe Power: AC 220V 50Hz

Minimum Order: 1 bags

Background 1. One key property of flexible barrier material is the resistance against repetitive strain, which is called flex durability, or Gelboflex. Good flex crack resistance will reduce the propensity of the package developing holes during the distribution cycle thereby destroying the package integrity. 2. A critical property of flexible barrier materials is their ability to withstand repetitive strain, known as flex durability or Gelboflex resistance. Strong flex crack resistance is essential as it lowers the risk of package perforation during distribution, safeguarding package integrity. Application 1. The flex durability tester is used to measure the resistance against repetitive strain for films, composites, and coating films, etc. Flex failure is determined by measuring the pinholes formed in the sample structure. It is also called Gelboflex. Good flex crack resistance will reduce the propensity of the package developing holes during the distribution cycle thereby destroying the package integrity. 2. The flex durability tester, also known as Gelboflex, assesses the ability of materials like films, composites, and coating films to withstand repetitive strain. It quantifies flex failure by detecting pinholes that may develop in the sample structure. Excellent flex crack resistance is vital as it minimizes the risk of packaging developing holes during distribution, ensuring the package remains intact throughout its journey. This is crucial for preserving the integrity of the contents within. 3. The flex durability tester, often referred to as Gelboflex, is employed to assess the ability of materials such as films, composites, and coating films to withstand repeated strain. It gauges flex failure by detecting the formation of pinholes within the sample's structure. Strong flex crack resistance plays a crucial role in preventing the development of holes in packaging during distribution, preserving the package's integrity throughout its journey. Standard ASTM F392, "Flex durability of flexible barrier materials". Sampling and motion 1. The sample size (200 by 280 mm) is attached to the flex tester mandrels. The flexing action consists of a twisting motion combined with a horizontal motion (compression), thus repeatedly twisting, and crushing the film. The test set up gives a twisting motion of 440º in the first 90 mm of the stroke and is followed by a straight horizontal motion of 65 mm. The speed is 45 cycles per minute. There are 5 pre-programed test conditions to choose from: Mode A– Full flex for 1 hour (2,700 cycles), Mode B– Full flex for 20 minutes (900 cycles), Mode C– Full flex for 6 minutes (270 cycles), Mode D– Full flex for 20 cycles, Mode E– Partial flex for 20 cycles. 2. In the flex tester, a sample measuring 200 by 280 mm is affixed to the mandrels. The flexing process involves a combination of twisting and horizontal compression, repeatedly subjecting the film to both actions. Specifically, the setup initiates a twisting motion spanning 440 degrees within the first 90 mm of the stroke, followed by a linear horizontal motion of 65 mm. The entire cycle occurs at a speed of 45 cycles per minute. Users have the option to select from five pre-programmed test conditions. Mode A– Full flex for 1 hour (2,700 cycles), Mode B– Full flex for 20 minutes (900 cycles), Mode C– Full flex for 6 minutes (270 cycles), Mode D– Full flex for 20 cycles, Mode E– Partial flex for 20 cycles. 3. The test procedure involves attaching a sample measuring 200 by 280 mm to the flex tester's mandrels. This flexing action combines twisting and horizontal compression, repetitively twisting and crushing the film. The setup initiates a 440-degree twisting motion within the first 90 mm of the stroke, followed by a straight horizontal motion of 65 mm. The entire cycle operates at a speed of 45 cycles per minute. Users can select from five pre-programmed test conditions. Technical Features The system features PLC control with an intuitive HMI touch screen interface. It offers five standard test modes and includes four test stations. Users can quickly switch between long and short stroke modes. Test conditions A, B, C, D, and E are selectable. Main Parameters Flex Frequency 45 /minute Flex Angle 440° (90 mm) or 400° (80 mm) Capacity 3.5 N.m Horizontal Stroke 155 mm or 80 mm Stations 3 Sample Size 280 mm x 200 mm Power 110~220V

Minimum Order: 1 bags

Application 1. The flex durability tester is used to measure the resistance against repetitive strain for films, composites, and coating films, etc. Flex failure is determined by measuring the pinholes formed in the sample structure. It is also called Gelboflex. Good flex crack resistance will reduce the propensity of the package developing holes during the distribution cycle thereby destroying the package integrity. 2. The flex durability tester, also known as Gelboflex, assesses the ability of materials like films, composites, and coating films to withstand repetitive strain. It quantifies flex failure by detecting pinholes that may develop in the sample structure. Excellent flex crack resistance is vital as it minimizes the risk of packaging developing holes during distribution, ensuring the package remains intact throughout its journey. This is crucial for preserving the integrity of the contents within. 3. The flex durability tester, often referred to as Gelboflex, is employed to assess the ability of materials such as films, composites, and coating films to withstand repeated strain. It gauges flex failure by detecting the formation of pinholes within the sample's structure. Strong flex crack resistance plays a crucial role in preventing the development of holes in packaging during distribution, preserving the package's integrity throughout its journey. Standard ASTM F392, "Flex durability of flexible barrier materials" Technical Features The system features PLC control with an intuitive HMI touch screen interface. It offers five standard test modes and includes four test stations. Users can quickly switch between long and short stroke modes. Test conditions A, B, C, D, and E are selectable, and the system is equipped with a microprinter for convenient data output. Main Parameters Flex Frequency 45 /minute Flex Angle 440° (90 mm) or 400° (80 mm) Capacity 2.5 N.m Horizontal Stroke 155 mm or 80 mm Stations 4 Sample Size 280 mm x 200 mm Power 110~220V

Minimum Order: 1 bags

Application 1. FTT-01 Thickness Tester employs mechanical scanning method to measure the thickness of plastic films, sheets, board, fabrics, textile, membranes, paper, foil, wafers and other materials. A specimen is placed on the base and a weighted presser foot lowered. The displacement between the base and the presser foot is measured as the thickness of the specimen. 2. The FTT-01 Thickness Tester utilizes a mechanical scanning technique to measure the thickness of various materials, including plastic films, sheets, fabrics, textiles, membranes, paper, foil, wafers, and more. In this process, a sample is positioned on the instrument's base, and a weighted presser foot is gently lowered onto it. The instrument then measures the displacement or the gap between the base and the presser foot, providing an accurate measurement of the specimen's thickness. This method is valuable for quality control and assessment of materials in industries where precise thickness measurements are essential. Standards ASTM D374-99: Standard Test Methods for Thickness of Solid Electrical Insulation ASTM D1777: Standard Test Method for Thickness of Textile Materials ISO 3034:2011: Corrugated fiberboard-Determination of single sheet thickness ISO 534-2011: Paper and board-Determination of thickness, density, and specific volume ISO 4593: Plastics; Film and sheeting; Determination of thickness by mechanical scanning Technical Features FTT-01 Thickness Tester is a PLC controlled unit (industrial level stable) and HMI touch screen operated. 1. PLC control and HMI touch screen operation 2. Presser foot automatic lifting 3. Real time display of maximum, minimum, average, and standard deviation 4. Test result storage and micro printing 5. RS232 port and software(optional) 6. Manual sample feeding and automatic feeding available(optional) 2. The FTT-01 Thickness Tester is an industrially stable unit controlled by a Programmable Logic Controller (PLC) and operated through an easy-to-use Human- Machine Interface (HMI) touch screen. It features automatic presser foot lifting, real-time display of maximum, minimum, average, and standard deviation measurements, as well as the capability to store test results and perform micro printing. Optional features include an RS232 port with software compatibility and the choice between manual sample feeding or automatic feeding. 3. Technical Features 1. Controlled by a PLC and operated through an HMI touch screen. 2. Equipped with automatic presser foot lifting. 3. Provides real-time display of maximum, minimum, average, and standard deviation measurements. 4. Capable of storing test results and micro printing. 5. Offers an RS232 port with software compatibility.(optional) 6. Both manual sample feeding and automatic feeding can be added. (optional) Main Parameters Test Range: 0~2mm(Customization available) Resolution: 0.1 μm Standard Measure Head: Hemispherical type Optional Measure Head (flat foot): 50 mm² , 17.5±1 KPa (for film) 200 mm² , 50±1 KPa (for paper) Power: AC 110~220V

Minimum Order: 1 bags

Application A Heat Seal Tester is a crucial apparatus in the packaging industry, employed to assess the heat-sealing characteristics of diverse materials including films, laminates, and other packaging components. The strength and integrity of heat seals in these materials play a pivotal role in ensuring the quality and efficacy of packaging for products ranging from food and pharmaceuticals to electronics and more. The functioning of this tester involves the application of specific heat and pressure to a sample of the material under examination for a predetermined duration. This process emulates the conditions in which heat seals are generated during packaging procedures. The ability to customize the heat, pressure, and time settings allows manufacturers to replicate varied sealing scenarios, enabling them to identify the optimal parameters for establishing robust and consistent seals. In the context of a Gradient Heat Seal Tester, the term "gradient" denotes the device's capability to create a controlled temperature gradient across the sealing zone. Alternatively known as a Multi-Station Heat Seal Tester, the Gradient Heat Seal Tester facilitates concurrent tests at varying temperature settings. This innovation effectively diminishes the waiting period between tests, thereby enhancing the overall efficiency of the testing procedure. Standards ASTM F2029-16(2021) :Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength Technical Features The key to a heat seal tester is its stability and accuracy in time, temperature, and pressure. GHS-02 Gradient Heat Seal Tester’s PLC control unit and HMI touch screen, ensure good sealing results with our state-of-art design, and it can realize five groups of sealing temperatures simultaneously. 1. Both the upper and lower jaws are made of aluminum and independently heated so that heat loss is maximumly eliminated in sealing and temperature smoothness is ensured. 2. First class P.I.D. (proportional integral derivative) temperature controller for optimal heating management. 3. Achieve accuracy with proximity and pressure sensor, ensuring controlled dwell time and sealing pressure. 4. Unform sealing pressure by the three-way guided sealing bar. 5. User protection designs, such as anti-scald front cover, manual and foot switch, etc. 6. Seal jaw customization available in terms of dimension, shape, and sealing surface/patterns. 7. More gradient temperatures of upper and lower heating can be customized. 8.Seamlessly connect through the RS 232 port and professional software (optional). Main Parameters Sealing Temp.: Ambient~250℃ Temp. Gradient: ≤20℃ Deviation: ±0.2℃ Sealing Time: 0.1S~9999S Sealing Pressure: 0.15~0.7 MPa Seal Jaws(mm): U: 40*10 (5PCS) L: 330 (1PCS) Gas Input: 0.7 MPa with Ф6 mm Pipe Power: AC 220V 50Hz

Minimum Order: 1 bags