Offers to Sell

Straight Seam High Frequency Welded Pipe Making Machine Material: Hot/cold roll steel, galvanized steel, carbon steel Tube Shape:Round tube, square tube, rectangular tube, special tube Thickness: 0.4-12mm Pipe size: round tube Φ8-Φ273mm Working flow: hanging material→feeding→un-coiler→shear and butt welder→horizontal spiral accumulator→forming→high frequency welding→scraper→cooling →sizing→straightener→computer control flying saw→lay out table

The dry ice pelletizer machine also can be named dry ice pellet machine, dry ice granulator machine, and so on, which is a piece of solid CO2 processing equipment for making dry ice pellets.

Minimum Order: 1 bags

XL Monopile 2000t Assembling Rotator Offshore Foundation Fit Up Welding Production Line Brief introduction: Heavy duty 2000t assembling rotator special for offshore foundation XL monopile final assembling process. Composed by 1set welding rotator (work load limit 2000t for 1power & 1 idler ) & 1set fit up rotator (work load limit 700t/idler) Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 0 Description: Composed by 1set 2000t welding rotator (1power & 1idler) & 1set 1400t fit up rotator (2idler).Total 1power & 3idler. All idler rotators are with hydraulic lift cylinder. 1power & 1idler working load limit 2000t; The other 2idler working load limit 700t/idler; Power rotator install motorized trolley. Traveling capacity 2000t; All idler rotator install idle trolley mobile on the rail; All the wheels are forged steel roller. Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 1 Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 2 Feature: Power rotator is double-motor driven, the roller driver adopt cycloidal planetary gear reducer. All idler with hydraulic liftable cylinder, effectively adjusting the MP position, aligning the joint edge. Wheel material is special material forged steel suitable for heavy duty work piece. With motorized trolley,able to take the monopile mobile along with the rail. Realizing ground logistic to decrease the crane/hoist using. The 2000T assembling rotator adjust the center distance by reserved screw holes in order to adapt to diameter of work piece. Production line 2000T offshore XL monopile Composed 1drive unit + 3idler unit (hydraulic lift) Max. Loading capacity 2000Ton (1power & 3idler) Workpiece dia. range ø3,000~ø10,000mm. Wheel material Forged steel Roller center distance 2100~4500mm The distance between ground and rotator center 1,850mm ( Return to zero point.) Roller center moving distance and adjustment method 1.The idler roller seat is fixed by bolts. 2.Adjust the center distance of the roller with bolt holes. 3.Roller seat moving distance is 150mm. Rotator walking method 1. One unit of rotator is electric walking and the other one is unpowered walking. 2. When the roller bed is walking, the maximum load is 1000 tons. 3. A group of rotator can move on the track at full load. 4. Electric walking speed is 230mm ~2300 mm/min Group pair lifting drive Hydraulic. Hydraulic station 1.Independent hydraulic station for each rotator. 2.Each hydraulic cylinder is equipped with an independent oil pressure gauge, and there is a comparison table of pressure-convertible load, which is recorded in the manual. Rotator control function 1.Low voltage (24V) wired (30M)/wireless remote control (100M). 2.Control cable length 30m, and must be provided a set control cable for spare parts. 3.The grounding of the electrical components of the control box must meet the electrical code requirements. 4.Cylinder lifting stroke and walking control. 5.Stop & E-stop button and synchronized function. 6.The remote control must have the above functions. 7.If the wireless remote control is damaged, it can use the wired control to operate. 8.Each hydraulic cylinder can operate independently and with linkage capability Electronic control part 1.Hydraulic station and power control box need to be protected. (windproof, dustproof, waterproof) 2.Electronic control box and elements can be fast disassembled. 3.The electronic control box and components need to adapt to the subtropical & island-type climate. 4.Perfect protection circuit (windproof, dustproof, waterproof). Transmission & gap protection Windproof, dustproof, waterproof. Rotator weight and lifting method 1.The weight of the rotator must be clearly marked on the drawing and sprayed on the rotator. 2.The rotator needs to provide and set the ideal lifting position and method and mark it on the drawing Rotator stabilization and anti-roll device 1.Set holding track device, the design drawings must be provided and recorded in the manual. 2.A stable device in contact with the ground is required at the periphery of the rotator. 3.When the rotator is fully loaded and not moving, the rotator can be stabilized. Protective Need to set up a variety of protection devices, such as ELCB, Electrical fuse, and so on. Maintenance spares 1.Must be used international label. Application: Offshore foundation XL Monopile Offshore wind tubular tower Petrochemical column Bullet tank Pressure vessels Chemical & fuel storage tank fabrication Any heavy cylindrical job Competitive Advantage: With lubrication system. VFD rotary speed control, improving the reliability of operation. Steel or PU roller which can ensure a long time using (at least 2 years). Inverter and main electric elements are Siemens/Schneider or equal brand. Accept testing before delivery. Accept special design and custom. Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 3 Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 4 Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 5 Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 6 Monopile Offshore Foundation Welding Production Line 2000t Assembling Rotator 7 What Ronniewell can do for Ronniewell customers: Give you high quality products. Give you five-star price. Give you suitable recommendation. Give you good after-service. Give you professional technical guide. Warmly welcome you visit our factory. Points you may concern: Customization - Can your machine or other products be customized? Ronniewell: Sure. As a professional manufacturer, we have our own engineer team, who is good at design, develop & build special solution catering for your individual requirement. Transportation-What about the transportation? Ronniewell: Seaway is the most common transportation way for oversea trading. Depends on your location, combined transport by rail and sea is also an option. Certainly railway transportation is also acceptable if it is the most suitable approach. After sale service - What about the after-sale service? Ronniewell: We provide 12month guaranty period for the whole machine quality. During this time, any issue proved because of the machine flaw itself,we would take the whole responsibility of it. Except of the guaranty period,technical advisory support is available freely covering the whole using life of the machine. Engineer service on user premises is also available for necessary.

Monoblock side-load cartoning machine for packaging bricks. This cartoning machine is a form-insert-seal 3-in-1 case packer with corrugated cases/cartons forming, filling and sealing functions. It employs a pushing system for inserting brick- shaped products in multiple layers into cases from their sides. This case packer can accommodate a wide range of case sizes and pack patterns. The cartons can be sealed with tape or hot-melt glue. It is a monoblock cartoning machine and easy to be installed. Features: 1. Form-insert-seal 3-in-1, with a smaller footprint. 2. The products that this machine can pack through its dedicated infeed system. 3. Easy to install. 4. System pauses and alert if cartons or tapes are empty. Specifications: Packing type: side-load Sealing media: tape or hot-melt glue Compressed air: 0.4-0.8MPa Power supply: 3 phases, customized voltage Power consumption: 3 kW System weight: 2,300 kg System dimensions: 3,500*1,900*2,300mm We also can customize monoblock case packers for other shaped products than bricks.

Minimum Order: 1 bags

Monoblock top-load case packer for packaging bricks. This case packer is a form- insert-seal cartoning machine with corrugated cases/cartons forming, filling and sealing functions. It employs a picker for picking and inserting brick-shaped products in multiple layers into cases from their tops. This case packer can accommodate a wide range of case sizes and pack patterns. The cartons can be sealed with tape or hot-melt glue. It is a monoblock cartoning machine and easy to be installed. Features: 1. Form-insert-seal 3-in-1, with a smaller footprint. 2. The products that this machine can pack through its dedicated infeed system. 3. Easy to install. 4. System pauses and alert if cartons or tapes are empty. Specifications: Packing type: top-load Sealing media: tape or hot-melt glue Compressed air: 0.4-0.8MPa Power supply: 3 phases, customized voltage Power consumption: 3 kW System weight: 2,300kg System dimensions: 3,500*1,900*2,300mm We are aslo able to customize monoblock case packers for other shaped products than brick.

Minimum Order: 1 bags

Carton liner placing machine for inserting bags in boxes by one each. This China- made fully-automatic liner placer cuts and seals film as a bag from a roll stock, inserts it in an erected carton, opens and cuffs the bag over the carton top flaps, blows air to extend the bag to fit the internal wall of box better. The liner bag placing machine reduces labor and material costs, is simple to operate and easy to adjust. This is an ideal machine for bulk box packaging of bread rolls, edible oil and fat, fruit and vegetable, granules and nuts, meat and fish, caps and closures, golfs and other. It will be more efficient and save more labor if this poly bag inserter works with a box former as the combination can be an automatic lined carton forming line. Specifications: Inserting capacity: 6-7 cartons/min Film width: 460-840mm Applicable carton dimensions: L250-550*W200-400*H150-40 0mm, also can be customized Power supply: 3 phase, 4.5 kW Compressed air: 6 bar Air consumption: 100 NL/min Machine dimensions: L3322*W2177*H2350mm (for reference only) We are also able to manufacture high-speed carton liner placing machine with 12 cartons/minute.

Minimum Order: 1 bags

Fully-automatic bag in box filling machine. It is a web-fed bag in box filler made in China and is designed for packaging a wide range of liquids like drinking water, edible oil, post mix syrup, fresh milk and beverage with 2-25L spouted bags. This filling machine features fully automated by employing a PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. This bag in box filling machine is designed with CIP (Clean-in-Place) function and pipeline connection. Features: 1. Fully-automatic, WEB type bags fed. 2. Easy to use. The touch-screen control system makes operation easy. 3. An electromagnetic or turbine flowmeter employed improves filling precision and truly achieves the quantitative filling. 4. An air filter employed bring clean air to the filling space. 5. Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6. Filling a different capacity bag acceptable only by changing the setting. Specifications: Applicable bags: pre-cut continuous module or WEB type, 2-25 litres spout bags. (Spout is called Gland or Flange too.) Filling capacity: 450-510 bags/hour for 5 litres 360-400 bags/hour for 10 litres 250-270 bags/hour for 20 litres Power: 3.5 kW Compressed air: 6-8 bar, 500 NL/min We also supply the downstream cartoning line for bag-in-box packaging.

Minimum Order: 1 bags

Fully-automatic bag in box filler. It is a web-fed bag in box filling machine made in China and is designed for filling spouted bags with a wide range of liquids like drinking water, edible oil, post mix syrup, fresh milk and beverage. This filling machine features fully automated by employing a PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. This bag-in-box filler is designed with CIP (Clean-in-Place) function and pipeline connection. Features: 1. Fully-automatic, WEB type bags fed. 2. Easy to use. The touch-screen control system makes operation easy. 3. An electromagnetic or turbine flowmeter employed improves filling precision and truly achieves the quantitative filling. 4. An air filter employed bring clean air to the filling space. 5. Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6. Filling a different capacity bag acceptable only by changing the setting. Specifications: Applicable bags: pre-cut continuous module or WEB type, 2-25 litres spout bags. (Spout is called Gland or Flange too.) Filling capacity: 450-510 bags/hour for 5 litres 360-400 bags/hour for 10 litres 250-270 bags/hour for 20 litres Power: 3.5 kW Compressed air: 6-8 bar, 500 NL/min We also supply the downstream cartoning line for bag-in-box packaging.

Minimum Order: 1 bags

Cinhpump Silent Micro Air Pump Mini Electric Long Lifetime Air Pump Quick Detail: 15L/m air flowrate 30kpa air pressure Double diaphragm, duckbill valves Aluminum body Continuous working day and night Warranty lifetime 10,000hours or 2years size:106x76x74 mm weight:0.7 kg Outlet & Inlet Dia: 0.3" (7.6 mm) Description: Cinhpump Silent Micro Air Pump PMA-15 series use a unique linear motion design that has the capability of over 20,000 hours of continuous maintenance-free operation. They are compact, cool and highly reliable and inexpensive. Features: Compact size Steady air outputs with low noise Very low vibration Low power consumption Economical Applications: intermittend pneumatic compression(medical) compression therapy ozone generator aquarium recovery system fragrance diffuser air bed Atmospheric Detection Dosing chemical material air massage instrument medical applications industrial applications household appliance Specifications: Air Output: 30SCFH(15Lpm) Pump Pressure: 4.5PSI(30kpa) Power Requirement: AC220V,AC120V, AC24V or AC12V, 50Hz or 60Hz or DC12V / DC24V with our mini power inveter. Power Consumption: 10W Pump Design: Double diaphragm, duckbill valves Pump Body: Aluminium Outlet & Inlet Dia: 0.3"(7.6mm) Electrical Connections: 1-ft(300mm)Insulated wire pair Noise Level: 40db unconnected, connected operation will reduce db level Dimension(LxWxH): 4.2"x3"x2.9"(106x76x74mm) Ne , t Weight: 0.7kgs Performance Curve Cinhpump Silent Micro Air Pump Mini Electric Long Lifetime Air Pump 0 Cinhpump Silent Micro Air Pump Mini Electric Long Lifetime Air Pump 1 Competitive Advantage: long lifetime, low noise, high quality, 15L/M air flowrate and 30kpa pressure.

SS316 Softgel Capsule Machine / Automatic Capsule Machine For Pharmaceutical Enterprises Non animal Softgel Encapsulation Machine For 50000 - 70000 Capsules / H Vegetable Gelatin Softgel Encapsulation Machine For 50000 - 70000 Capsules / H Quick Detail Product Name Soft capsule Filling Machine Power consumption 13 kw Control Mode PLC+Touch screen Plunger Numbers 12 Dimension 880X2200 , X2000mm Dosage deviation < ±2% 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 0 Product Description S407 Softgel Encapsulation Machine is developed based on Model S406 softgel encapsulation machine. The die roll length is 20mm longer. It combines advantages of foreign equipment and requirements of customers,considering the needs and the biggest benefits of customers as start point.There are following features besides S406’s. S407 adopts PLC operation, making operation more convenient. The die roll’s rotation rate can be regulated within 0 to 7 rpm, so users can choose the most proper rotation rate according to data of different material and techniques. Drying cycle is controlled by PLC unified, so users can regulate the cycle time conveniently. The tumbler dryer is designed with a device to remind operators to prepare well when discharging. S407 can realize the function of statistical statements and printing. The machine drive system’s lubrication pump is droved by motor alone, which greatly improves the lubrication performance when main equipment operating at a very slow speed. At the same time, it can reduce machine vibration, prolong machine overhaul time and save investment for users. Specifically speaking, it has the following characteristics: Dosage deviation:< ±2% Material of oil roller: porous stainless steel Parallel degree of main shaft of the die rolls:<0.02mm Micro gelatin ribbon oil lubrication Precision temperature control for injection wedge, spreader box and chilled water. The running parameters can be stored and recalled with a finger tip touch if necessary. Pneumatic wedge lift up. Pneumatic left die shaft movement. 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 1 Application It’s mainly for softgel making enterprises and pharmaceutical enterprises and universities. Specification Model S407 Die roll Ф103X172mm Die roll speed 0~7rpm Plunger numbers 12 Overall dimension 880X2200X2000mm weight , 1200kg Power consumption 13kw Control mode PLC+Touch Screen Output rate 8#OV 50000-70000 pcs/hour for animal gelatin 8#OV 30000-50000 pcs/hour for animal free gelatin Soft capsule/softgel making machine, paintball making machine, Tumble drying machine, gelatin melting tank 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 2 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 3 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 4 7 Inch Electric Encapsulator Machine For Pharmaceutical Enterprises 5

Four-shelf POP Cardboard Display Eco-friendly With Different Header Cards For Selling Earbuz Items To Wal-mart Quick Detail: Size: W16 13/16*D11 1/4*H53 1/8inches, customized as per products and product- placement Materials: B flute (150gsm wave) + 350gsm CCNB,also EB flute etc available Printing: 4C/0C offset,also can be 5 colors or 6 colors Surface treatment: Glossy PP lamination or UV coating Packing: flat package, or pre-filled products before shipping to overseas or supermarkets All specification—design, dimensions, graphics can be changed as per customers requirement Advantage: 1) 100% recyclable and strong material, eye-catching and stable design for showcase heavy products, it can support 20kgs,with different headers suitable for presenting different products. 2) Eco-friendly and high-quality printing, bring no harm to our environment 3) Help promote products and enhance brand awareness 4) Fix a screen on the top header to advertise products vividly 5) Easy to assemble and save freight cost ,while pre-package can help save labor cost for supermarket so as to enhance competitive power 3. Specifications in detail: Model Number: TWFD145 Size: W16 13/16*D11 1/4*H53 1/8inches, can be customized material B flute (150gsm wave) + 350gsm CCNB Printing: 4color CMKY offset printing Final finish: Glossy lamination, also can be UV/Matt lamination Accessory: privide different header cards Place of Origin: CN Brand Name: T&W Certification: SGS, , ISO Minimum Order Quantity: 50pcs, small order & sample order are acceptable Price: Depends on qty,size,printing,package etc Packaging Details: In flat, as per customer’s requirement or pre-filling with products before shipping or before delivery to supermarket, with clear and detailed assemble instruction Delivery Time: About 12-15days Sample leading time About 2-5days Sample charge Customer need to pay sample charge which is refundable when run mass production Payment Terms: T/T or L/C, Western Union,Paypal Supply Ability: 200,000pcs per month Structure design Designed By T&W Artwork/graphic Offered by customers Artwork format PDF,AI,PSD,coredraw,PS Four-shelf POP Cardboard Display Eco-friendly With Different Header Cards For Selling Earbuz Items To Wal-mart 0 Four-shelf POP Cardboard Display Eco-friendly With Different Header Cards For Selling Earbuz Items To Wal-mart 1

High Efficiency Silica Gel Wheel Industrial Desiccant Dehumidifier With Cooling Coil Quick Details: Style: Refrigeration combined with Wheel Desiccant Rotor: Sweden Proflute Desiccant Material: Silica Gel Wheel Rated Air Flow: 6000m³ /h Supply Air Parameters: T=25℃ RH=20% Dehumidifier Quality: High Installed Power: 49.1kw Voltage: 380V, 3 phase, 50Hz or customized Certification: ISO9001:2008 Features: Economical, energy-saving Usage: Air temperature and humidity control General Description: ZCB Series Desiccant Dehumidifier System removes humidity using both refrigeration and a desiccant rotor, so it can both control the humidity and temperature of the air independently in one packaged unit. Operating Principles: Supply Air Stream Outside air is drawn into the unit using the supply fan. The warm, moist outside air first passes through filters and then the cooling coil where it is cooled. The air then goes through the desiccant wheel where the air is dehumidified and the temperature is raised. At last the air is delivered directly to the space or into an existing air handler. Exhaust Air Stream Exhaust air is used to provide energy recovery for the desiccant wheel and is drawn into the unit using the exhaust fan. The air filtered and then heated and humidified during the energy recovery process. The air is then heated while passing through the regeneration coil. The heated air removes the moisture that the desiccant wheel adsorbs from the process air stream. Applications: War Industry, Scientific Research, Electric Power Transportation Lithium Battery Industry, Biotechnology Pharmaceutical Industry Chemical, Daily Chemical Industry, Food Beverage Industry Safety Glazing Material Industry, Tyre and Rubber Industry Medical Instrument, Vegetables Frozen, Precise Instrument Wood Goods, Shipbuilding Painting Industry, Kinds of Storage Specifications: Main Parameters Model ZCB—6000 Total Process Airflow 6000m3/h Fresh Airflow 300 m3/h Recirculated Airflow 5700 m3/h Rotor Regeneration Airflow 2000m3/h Parameters of Output Air T=25℃ RH=20% Regeneration Power 42kw The Power of Regeneration Fan 1.5kw The Power of Blower 5.5kw The Power of Driving Motor 0.1kw Installed Power 49.1kw Cooling Load 232.6kw Power Supply 3P/380V/50HZ Competitive Advantage: Sweden Proflute silicon gel wheel A totally self contained unit PLC automatic control system, human-machine interface Aluminum alloy frame, anti-cold bridge Body modularization design, foam injected double wall casing Stainless steel drain pan and bottom boards Process and reactivation air flow sectors are insulated Electric or steam heating or convert type can be available All operation parameters can be on-line observed, ensuring operation reliability High temperature safety thermostat cutout Electrical interlocking of fan motors, heaters and rotor driving User Friendly Automatic Interface Control System: High Efficiency Silica Gel Wheel Industrial Dehumidifier With Cooling Coil 0 Production Workflow Chart: Rotary Wheel Industrial Desiccant Dehumidifier for Pharmaceutical Industrial 23.8kg / h We can make suitbale dehumidifying solution for you according to your requirements. If you are interest on our product, contact us now.

2x6 12 LED 5050SMD 20W 30W Street light module with heatsink 200x72x40mm Quick Detail: Model No:SUN-LD2X6CR145x70-TPIII-M-V Material: PC Beam Angle : 145X70 degree Lens size:173X71.4X7.51mm Heatsink size:200x72x40mm (20-30w) Circuit: 2 series 6 parallel 48v output / 12 LED in parallel 24v output Led chips:5050SMD LED 24V white color, 3000-6500k Lense array of 12 LEDs Small footprint, high light output Features : This SKD 12 LED Array lens with PCB Module is best choice to retrofit the old lamps 10-30W or design power lamps. It’s the lowest total cost solution ,they can replace existing Metal Halide or HPS bulbs, the old housings can be re-used. The total cost is significantly reduced compared with using new complete LED fixtures. Industry-leading thermal management utilizing technology Operating temperature range: from 35 Celsius degree to 70 Celsius degree. The LED retrofit kits contain no any mercury or lead. Does not produce UV rays that harm people’s eyes. Directional light means no light pollution, dark sky compliance. Optic lenses are available for projects that need smaller beam angles, like 129X55degree ,60X60 degree ,12 degree ,30X90 degree ,30degree ,90 degree,60 degree, 145x53 degree,150x80 degree,157x57 degree,160x63 degree, 157x81 degree, etc. . Applications: It is used in the street light ,high way led lamp,tunnel lamp ,square lamp,road lamp, city lighting, parking spot lamp, track lighting fixtures ,scenery area ,retail lighting and other applications where high luminous flux is desired. Specifications: 1, Product Name 2x6 12 LED 5050SMD 20W 30W Street light module with heatsink 200x72x40mm 2, Model No SUN-LD2X6CR145x70-TPIII-M-V 3, Main parts 12 Array lens , silicon gasket+PCB +heatsink 4, Lens Material PC 5, Lens size 173X71.4X7.51mm 6, Transmittance 93% 7,LEDS 5050 , SMD 1-5W 24V LED 8, Sample 3-4 work day 9, Delivery 5-7 work days for 300 sets 10, Angle 145x70 degree, TYPE3-M 11, Quality guarantee If you receive defective items, please email us a picture of the defective part. We will send you replacement without extra charger, or offer refund. 12, Main market Europe, South America,North America, Asia Shipping and delivery time: DHL/UPS/TNT/FEDEX 4-5 working days EMS 10-15 working days HK Post Air Mail Register 15-18 working days Trade Terms FOBEXWCIFCFR Sample availability YES Delivery time 3-4 working days 2x6 LENS Dimensions And Beam pattern: 12LED 5050SMD 20W 30W LED Street Light Module With Heatsink 0 12LED 5050SMD 20W 30W LED Street Light Module With Heatsink 1 LED module with heat sink: 12LED 5050SMD 20W 30W LED Street Light Module With Heatsink 2 12LED 5050SMD 20W 30W LED Street Light Module With Heatsink 3 12LED 5050SMD 20W 30W LED Street Light Module With Heatsink 4

PFA Pellet SF-3304A with MFR 12.1-16 Product Description PFA is the copolymer of TFE and PPVE, with excellent chemical stability. electrical insulating property, age resistance and low friction. Its high temperature mechanical property is much higher than PTFE and can be processed as common thermoplastics. Grades and Technical Properties Item Unit SF3301 SF3302 SF3303 SF3304 A B C Appearance Translucent particle, without impurities such as metal debris and sand, containing visible black particles percentage point less than 6% MFR g/10min 0.8-2.5 2.6-6 6.1-12 12.1-16 16.1-24 ＞24.1 Relative Gravity(25℃) g/cm3 2.12-2.17 Melting Point ℃ 300-310 Processing Tm ℃ 260 Tensile Strength(23℃),≥ MPa 32 30 28 26 24 24 Elongation at break(23℃),≥ % 300 300 350 350 350 350 Volatile,＜ ％ 0.01 Application: SF3301: used to produce lining of pipe, valve, pump and bearing; SF3302:used to produce pipe, insulation jacket of wire, membranes; SF3303:extrusion process, mainly used to produce the jackets of wire and cable; SF3304:used to produce high-speed extruded wire and cable. Attention The process temperature should not exceed 425℃ to prevent PFA decomposition and equipment corrosion.3. Product waste must be handled properly following local laws and regulations. Packaging, Storage and Transportation 1.Packing:in woven plastic bag with inner polyethylene bag of 25kgs net. 2.Stored in clean, cool and dry places to avoid contamination. 3.Nontoxic, noninflammable, inexplosive, non-corrosion, transported as non- dangerous products. Translucent Particle Fluoropolymer Resin PFA Pellet SF-3304A With MFR 12.1-16 0Translucent Particle Fluoropolymer Resin PFA Pellet SF-3304A With MFR 12.1-16 1