Offers to Sell

Surface mounted FBG strain sensor MS-01/MST-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces. The external strain transmits the strain to the internal fiber grating through the sensor mounting base, and the high-precision fiber grating converts the sensed tiny strain into a sensitive optical wavelength, which is analyzed by an FBG interrogator. Features Of FBG Strain Sensor MS-01/MST-01 High precision, resolution, and stability Buit-in Temperature Compensation (MST-01) Anti-electromagnetic interference Long-term zero point stability Easy to set up distributed sensor network Easy to install and reusable Application Of FBG Strain Sensor MS-01/MST-01 lSuitable for strain monitoring of bridges, gas pipelines, etc lLarge steel structures such as transmission line towers, cranes, hoists lStrain monitoring of rail surface lSteel structure & concrete surface strain measurement Specification Of FBG Strain Sensor MS-01/MST-01 Parameter Unit Value MS-01 MST-01 Center Wavelength nm 1460 ~ 1610 Range με ±1500 Resolution με 0.01% F.S. Accuracy με 0.1% F.S. Temperature Compensation -- No Yes Material -- Stainless steel Dimension mm Φ12 x 126 Installation -- Welding Pigtail Length m Φ3mm armored cable, 1m at both ends, or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 The sensor accuracy does not contain error sources originating from the read- out equipment. AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic temperature sensor, fiber bragg grating pressure sensor, fiber optic sensing, fbg strain gauge, fiber optic strain gauge, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Embedded FBG strain sensor ES-01&EST-01 is specially used for the internal strain measurement of concrete, reinforced concrete or plastic materials, so as to observe the change of internal stress of the structure for a long time, conduct state analysis, and achieve the purpose of warning and object health status diagnosis. The sensor is small in size and easy to install. It is connected in series or in parallel, and it is easy to form a quasi-distributed sensor network. Features Of FBG Strain Sensor ES-01&EST-01 Anti-electromagnetic interference, lightning strike, corrosion resistance High measurement accuracy and reliability Built-in temperature compensation for EST-01 Easy to set up distributed sensor network Easy installation for long-term monitoring Application Of FBG Strain Sensor ES-01&EST-01 Health monitoring of civil engineering structures such as bridges, dams, tunnels, buildings, etc. Reinforced concrete stress and strain monitoring Transportation industry (rail, road, aerospace) Structural health monitoring of oil, gas pipelines and offshore oil platforms AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic sensor, fiber bragg grating pressure sensor, distributed strain sensing, fiber sensing, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Fiber Bragg gratings are very sensitive to stress and temperature. No matter whether the FBG is subjected to stress or the ambient temperature changes, it is reflected in the fiber grating that the grating pitch has changed, that is, the fiber grating sensor has corresponding strain. This means that when you want to use FBG strain sensors for accurate testing, you must consider whether the ambient temperature has changed, you must deduct the effect of temperature on the reflected wavelength from formula Strain(μɛ)=((λS-λS0）-（λT-λT0） *KT)/ , Ks, that is to say, let (λT-λT0)=0 or the value of (λT-λT0) is numerically known, this process is called FBG Temperature Compensation for Strain sensors. Types of FBG Strain Sensor FBG Strain Sensor MS-01/MST-01 Mountable Strain Sensor MS-01 made of stainless steel, the sensing part adopts elastic structure, and the mounting base is a separate component, which can be easily installed. FBG Strain Sensor MS-02 Mountable Strain Sensor MS-02 made of stainless steel, elastic structure of the sensing part fixes the optical fiber in the stainless steel plate in the form of non-glue, which can be used permanently. FBG Strain Sensor ES-01&EST-01 Embedded Strain Sensor ES-01 is used for strain detection of structural safety, such as the internal strain detection of concrete in bridges, reservoirs, dams, highway tunnels, and other buildings. FBG Strain Sensor MST-03 Mountable Strain Sensor MST-01 adopt the technology of temperature compensation, two FBG inside the housing, which can eliminate the influence of the temperature from strain monitoring. Principle and Method of Temperature Compensation for FBG Strain Sensor The best way for AtGrating to compensate the temperature for the FBG strain sensor is to inscribe double gratings in one fiber, and then package it into the FBG strain sensor with temperature compensation, one FBG is used to measure the strain, and the other is used to measure the strain. Since the strain FBG and temperature FBG are in the same temperature environment, the temperature value measured by temperature FBG can be regarded as the temperature of strain FBG. Hence we can deduct the influence of temperature on the reflected wavelength from formula Strain(μɛ)=((λS -λS0)-(λT-λT0)*KT)/Ks, so as to obtain an accurate strain change value. AtGrating is a professional supplier for optical fiber sensing. AtGrating offers bragg filters, fiber bragg grating pressure sensor, fbg sensing, bragg grating strain sensor, fiber strain sensor, optical strain sensor, fbg strain sensor, fiber bragg grating strain sensor, fiber optic strain sensor, optical fiber strain gauge, optical strain gauges, etc. For fiber optic strain gauge price or more information, please feel free to contact us!

Minimum Order: 10 long tons

10 Inch 1024*768 Hsd100ixn1-A10 Touch Screen Panel Lcd Display Tft Module HSD100IXN1-A10 is a 10.0 inch diagonal a-Si TFT-LCD display screen product, with an incorporated WLED lighting system, without backlight driver, without touch screen. Based on datasheet with version of Rev1.0 which was released out on 4 27 2010, HSD100IXN1-A10 supports display 1024(RGB)×768 (XGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 202.752(W)×152.064(H) mm, outline size of 215.5(W)×166.5(H) mm, viewing area size of 205.8(W)×155.1(H) mm, with surface treament of Antiglare, Hard coating (3H), net weight of 330g (Typ.). As a TN, Normally White, Transmissive LCM product, HSD100IXN1-A10 can provides 250 cd/m² display brightness 600:1 transimissive contrast ratio, 75/75/60/70 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 2.4/5.6(Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit gray scale signal for each dot, thus presenting a palette of 262K colors, also with performance of color gamut 60% (NTSC). This product adopted 3S11P WLED as it's backlight systerm which was placed as Edge light type (Bottom side) and have a working life time of 20K hours, external backlight driver is additionally needed. HSD100IXN1-A10 utilizes TTL (1 ch, 6-bit) as it's signal inputting systerm, which connected by 60 pins Connector with power supply voltage of 3.3/9.48/17/-7V (Typ.)(VCC/AVDD/VGH/VGL). It's typical vertical frame rate (Fv) is 60Hz. product details Module number HSD100IXN1-A10 Resolution 1024(RGB)×768, XGA, 128PPI Pixel Format RGB Vertical Stripe Display Area 202.752(W)×152.064(H) mm Bezel Opening 205.8(W)×155.1(H) mm Outline Size 215.5(W)×166.5(H) mm Surface Antiglare, Hard coating (3H) Brightness 250 cd/m² (Typ.) Contrast Ratio 600:1 (Typ.) (TM) Viewing Angle 75/75/60/70 (Typ.)(CR≥10) Display Mode TN, Normally White, Transmissive Best View on 6 o'clock Response Time 2.4/5.6(Typ.)(Tr/Td) Display Colors 262K 60% NTSC Lamp Type 3S11P WLED , 20K hours , Without Driver Signal Interface TTL (1 ch, 6-bit) , 60 pins Connector Environment Operating Temp.: -20 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C features The panel parameters displayed on this web page are entered by the electronic engineer of the company according to the specifications. Efforts have been made to reduce the errors, but the parameters are not fully correct. Please refer to the specifications! Hsd100ixn1-A10 TFT Color LCD Display 16:9 250cd/M2 Touch Screen Panel 15in 0 faq 1.Q: Which sizes is available for the LCD Display in your factory? A: Normally, we supply3.5“4.3”5“5.6” 7'' 8''9“ 10.1'' 10.2'' 13.3'' 14'' 15.6'' 18.5'' 21.5'' 23.6'' 24'' 27'' 32'' 43'' 49'' 55'' 65''. If customers need others size, we also supply such as 75'' 86''. 2.Q: Is the lcd display can make touch screen? A: Yes, normally we have 3 kinds of touch for options, IR touch, capacitive touch and resistive touch. 3.Q: If the customized do you support? A: Yes, we can do OEM and ODM. We can provide other accessories such as touch panel, control board, etc. of different sizes and types according to customers' requirements. 4.Q: How long is the delivery time? A: Normally about 5-15 working days for standard version. If customized product, need about 15-20 working days. 5.Q:How about the warranty? A: We supply one year warranty. 6.Q: What is the MOQ? A: We supply 1pcs MOQ for testing and qualification. 7.Q: What package do you have? A: Different kinds of package for options: Wooden case, Honey comb case, and Flight case.

Fiber optic pressure transducer PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so as to eliminating the environment temperature influence, and get the accurate pressure measurement. The PT-01 is embedded in hydraulic structures, bedrock or installed in piezometric pipes, boreholes, dams, pipes and pressure vessels to measure water pressure of pores or liquid level, it can also be used for dam seepage and seepage pressure monitoring, pressure vessel measurement, oil, water, gas pressure measurement, water level monitoring. Features Of optical pressure transducer PT-01 High precision and reliability Intrinsically safe Wide measuring range Quasi-distributed measurement Built-in temperature compensation Application Of FBG Pressure Sensor PT-01 Pore water pressure, water table depth Dam seepage and seepage pressure Dangerous goods storage tank pressure Tunnel, underground building water level Slope, tailing reservoir groundwater level Specification Of FBG Pressure Sensor PT-01 Parameter Unit Value Center Wavelength nm 1460 ~ 1610 Range MPa 1 ~ 60 Resolution MPa 0.05% F.S. Accuracy MPa 0.5% F.S. Temperature Compensation -- Built-in Material -- Stainless steel or Inconel Dimension mm Φ26 x 137 Installation -- Bolted, Embedded Pigtail Length m Φ3mm armored cable, 1m at single end (dual fiber), or customize Optical Connector -- FC/APC, or customize Operating Temperature °C -20 ~ +80 AtGrating is a professional supplier for optical fiber sensing. AtGrating offers fiber optic filter, fiber bragg grating pressure sensor, sensing fiber, etc. For more information, please feel free to contact us!

Minimum Order: 10 long tons

Product Description 8m 29 Passenger Seats ZEV BUS for Sale Description: It adopts high-efficiency permanent magnet synchronous electric drive system and lithium iron phosphate power battery, which has the advantages of safety, reliability, high efficiency and energy saving, and intelligent control.Through the intelligent management of vehicle control, motor drive, and energy management,as well as the precise optimization of control strategies, the vehicle's power, economy and comfort can reach the best balance. Specs Overall specs Passenger capacity 61 (14-29 seats) Motor specs Manufacturer ZEV Vehicle size (mm) 8095*2400*3150 Model ZEV Wheel base (mm) 4200 Position rear Front/Rear overhang 1865/2030 Motor type PMSM Front/Rear tread 1992/1802 Max.power(kw/rpm) 170 Approach/Departure(º) 8/10 Max. torque (N.m/rpm) 1700 Max. Grade-ability(%) ≥15% Displacement(L) -- Top speed (km/h) 69km/h Fuel Electric Curb weight (kg) 7400 Emission -- Gross weight (kg) 13700 Battery 198.4 kwh,LiFePo4 Cruising range ≥250km Charging time Within 2h Item Specs Remarks Chassis Front axle DANA Rear axle DANA Transmission Auto transmission Suspension Leaf spring Steering Integral power steering, elector-hydraulic power steering Braking Front disc and rear drum ; dual circuit air brake, ABS,slack adjuster Tyre 265/70R19.5 14PR steel rim Tubeless radial tire Battery Maintenance-free type electronics AC 20000kcal/h Defroster Electric Instrument CAN Bus Line Audio-system MP5 Lights Front and rear combination light. Fog light. Monitoring system CCTV system with 6 cameras Route board Front, rear and side LED type Bus facilities Body Cathode coating. Passenger door Front aluminum inner swing door Window Sliding side window, laminated front windscreen and tempered rear- shield Passenger seat 14-29 plastic city bus seats Interior PVC duct, PVC composite side plate. Punched aluminum-plastic roof plate. Floor and floor cover PVC floor, anti-slippery, flame retardant leather Paint Solid paint Others Station broadcaster with speaker, wireless passengers stop buttons, Safety hammer with alarm function,Electronic clock,Manual fire distinguisher ,Auto fire distinguisher in battery cabin,USB connector at driver area, connector for payment machine,WIFI , Travelling record with GPS Pictures for reference Automatic LHD Electric 29 Passenger Shuttles Wheelbase 4200mm 0Automatic LHD Electric 29 Passenger Shuttles Wheelbase 4200mm 1 FAQ: Q: Who we are? A: ZEV is a group company specializing in buses and coaches R&D, manufacturing and marketing. From its foundation in 2000’s, ZEV’s culture of continuous innovation has made it a leading manufacture in China. Now we have developed a series of Electric BUS&COACH as well as Hydrogen fuel cell bus. There will always be a model that suits you the most. Q: What can we offer? A: 1. As a public transportation provider, we can not only provide you buses and coaches but also a comprehensive solution for a better travel experience. Buses and coaches CBU, KD kit, Chassis and Body frames Spare parts including various charger for EV Q: Do you accept customized service? A: Yes. We can offer customized service according to your requirements . Q: What’s the delivery time? A: Normally 20-35 workdays. Q: Why choose us? A: We guarantee professional service, competitive price with high quality vehicles.

Single-Head Granular Dry Ice Pelletizer/Ice maker Machine/Dry Ice Freezer single-head granular dry ice machine can produce Ф3-Ф16mm high-strength particles, column dry ice, with the production capacity 200kg/h. The dry ice production of this machine are mainly applied to dry ice cleaning,low temperature preservation and cold chain transportation, smoke fog and etc. Applicable Industries cold-chain ,industrial clearing Condition New Place of Origin Jiangsu, China Brand Name Huaruide Ice Shape Bullet Voltage 380v/220V Power 15kw Dimension(L*W*H) 270*150*180cm Weight 1700, 1700 Warranty 1 Year Key Selling Points Automatic Ice storage capacity 300Kg Machinery Test Report Provided Video outgoing-inspection Provided Warranty of core components 1 Year Core Components Pressure vessel After-sales Service Provided Overseas service center available, Online support Product name Single-Head Granular Pelletizer/Ice maker Machine/Dry Ice Freezer Color Nature Material Stainless Steel 304 Application Dry ice making Ice size 3-19mm Keyworda Single-Head Granular Pelletizer/Ice maker Machine/Dry Ice Freezer Fuel Tankage 280L Raw Materials ≥1.5(t/m3) After Warranty Service Online support Certification ce Marketing Type Ordinary Product About US Wuxi Huaruide Automation Machinery C0.,LTD was established in 2003 . Our company is engaged in manufacturing and supplying all kinds of dry ice block machine, dry ice pelletizer machine, dry ice reformer, dry ice production line,dry ice blasting machine and dry ice storage container. we can provide all kinds of dry ice 3mm 19mm and 250g block and 500g block , 1kgs block , 5kgs block , 11kgs block and 50kgs block.We have passed CE certificate . Have do business with the famous gas companies such as Messer, Linder and Praxair....and get more good feedback. Warmly welcome to visit our factory and do business with you! Product catalogue automotive dry ice blasting machine carbon dioxide co2 gas carbon dioxide ice cubes carbon dioxide making machine co2 blasting machine co2 dry ice machine co2 ice cubes co2 ice maker co2 maker machine co2 pelletizer commercial dry ice storage container dry ice blasting machine for home dry ice blasting machine paint removal dry ice blasting pellets dry ice blasting unit dry ice block lb dry ice block press dry ice block reformer dry ice cube capsules dry ice granules dry ice maker for block dry ice maker for laboratory dry ice pellet making machine dry ice pelletiser equipment dry ice pelletizer machine for sale dry ice pellets 3mm dry ice pellets food grade dry ice pellets for cocktails dry ice pellets for drinks dry ice pellets machine dry ice production solid co2 dry ice reformer dry ice rust removal machine dry ice shipping containers mini dry ice machine mobile dry ice blasting machine pellet dry ice maker small dry ice maker machine 1 8 dry ice pellets 10 lb block of dry ice 1kg dry ice pellets 3mm dry ice pellets 5lb block of dry ice dry ice gas

[**Vapes**][1] have been the first choice of more and more smokers, need more different brands, different styles of vapes, you can come to our vape store to buy. Our vape store is the most comprehensive and professional vape store, easy to buy, affordable, welcome to consult at any time to buy. [1]: http://wwwl.vapemens.com

Minimum Order: 1 bags

　　Pump mechanical seals are critical components in ensuring the safe and efficient operation of centrifugal pumps. A mechanical seal is a device that prevents the leakage of fluid from a pump, and is typically located at the point where the pump's rotating shaft passes through the pump casing. 　　There are several different types of mechanical seals, but the most common type used in centrifugal pumps is the cartridge mechanical seal. This type of seal consists of a stationary seal face, a rotating seal face, and a set of springs or bellows that apply pressure to the seal faces, ensuring a tight seal. The seal faces are typically made of hard, wear-resistant materials such as silicon carbide, tungsten carbide, or ceramic. 　　Pump mechanical seals offer several advantages over traditional packing gland seals. Firstly, they offer superior leak protection, which can help to prevent environmental damage and reduce maintenance costs. They also reduce energy consumption and increase pump efficiency, as the reduction in leakage leads to less fluid being pumped, and less energy being required to do so. 　　Additionally, mechanical seals are generally more durable than packing gland seals, and require less frequent replacement. This can lead to significant cost savings over the life of the pump. 　　Mechanical seals can be used in a wide range of applications, including water and wastewater treatment, oil and gas production, chemical processing, and power generation. In each application, the specific requirements for the seal may vary, such as temperature and pressure range, fluid compatibility, and shaft speed. 　　In order to ensure the proper functioning of a pump mechanical seal, regular maintenance and inspection is required. This may include cleaning the seal faces, replacing worn or damaged components, and adjusting the seal pressure to maintain a tight seal. 　　Pump mechanical seals are an essential component of many industrial applications, providing superior leak protection and increased pump efficiency over traditional packing gland seals. With proper maintenance and inspection, mechanical seals can provide reliable and long-lasting performance, helping to ensure the safe and efficient operation of centrifugal pumps.

Minimum Order: 10 long tons

20hp 15kw Screw Air Compressor Integrated 350 Lilter Air Tank Dryer All In One Air Compressor Product Advantages The Air Compressor for Fiber Laser Cutting Machine Integrated compressed air system includes screw compressor, refrigerated air dryer, tank specialized for fiber laser cutting machine. More Convenient Integration of air compressor, air tank, and air dryer. It avoids the trouble of customers purchasing additional pipes and fittings. Use directly after installation, saving space. More Reliable Modular design, durable components, low noise and vibration, and easy maintenance. Energy Efficiency Using permanent magnet variable speed motor, specialized for laser cutting machine, reducing pressure leakage and more energy-saving. Pure Compressed Air High efficiency refrigerated dryer, multi-stage precision filter, oil content of gas is lower than 0.001 PPM, ensuring the purity of compressed air. Technical Parameters Model CPBZY15 Type Fixed air-cooled twin-screw air compressor Dimensions 1900*700*1650mm Installation method Fixed installation without foundation Rated displacement 1.16m3/min Rated exhaust pressure 1.58Mpa Exhaust oil content ≤0.003 ppm Exhaust pressure dew point 2~10°C Compression stages Single-stage Transfer method belt Compression oil consumption 8L Cooling method Air cooling Cooling air volume 3500 m3/h Ambient temperature 0 ~ 45°C Noise ≤65 dB Weight 560kg Notes: 1. A represents air-cooling type,W represents water-cooling type; 2. Working Environment temperature: -5ºC~45ºC; 3. Discharge temperature is less than ambient temperature +10ºC~15ºC; 4. Drive Mode: belt driven; 5. Startup Mode: direct start under 11kw, and above 11kw; 6. Work Power: 380V / 50HZ, 460V / 230V / 6KV and 10KV voltages can be made for customers; 7. F.A.D volume flow test is according to ASMC PTC9 or ISO1217 standard (GB/T3853) Screw All In One Air Compressor 350 Lilter Air Tank Dryer Integrated Air Compressor 0 Dehaha 4-in-one (Compressor + receiver tank+ dryer + filters) high pressure air compressor is special compressor for Fiber Laser Cutting industry, custom built to provide filtered, dried, continuous reliable supply of high pressure compressed air at 2~10ºCdew point to assist laser cutting. Produce your own assist air at a fraction of the cost of cylinder. Application industry Screw All In One Air Compressor 350 Lilter Air Tank Dryer Integrated Air Compressor 2 Project Case Screw All In One Air Compressor 350 Lilter Air Tank Dryer Integrated Air Compressor 3 About us Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineersteams ’ . We focus on the research & develop,manufacture and energy-saving solutions of screw air compressor to create value for customers and society.In 2018 our total sales volume approached 15 million US dollars.By over 23 years enhanced experiences of designing,producing and marketing,today our valued customers are over 130 countries. Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents. Dehaha’s primary businesses focus in following key areas: Oil-injected rotary screw compressors Portable screw air compressors Oil free air compressors High pressure air compressors Air treatment equipment

Current Adjustable Smart EV Charger 11kw 16A With LCD Screen Function Quick Detail: · Model Number: GS11-AC-B01 · Rated Voltage:400V AC · Rated Current: 16A · Rated Output Power: 11kw · Charging Port: Type 2 Cable · Cable Length: 3.5M/Customized · Communication: 3G/4G/5G, WIFI or Bluetooth Optional · Start Mode: Plug and Play/RFID card/App · Function: APP Control, screen display, Voltage Monitoring THE BEST CHARGING EXPERIENCE 1.WiFi connectivity with mobile App and online control dashboard. Schedule your charging when rates are lower. 2.Plug and play-a single card for charging, more convenient and faster OCPP. 3.Rapid identification of vehicles in motion.Maximum security when used with contactlesssmartcards. Specifications: Product Name EV Charging Station (WallBox) Data Model GS7-AC-BO1 GS11-AC-BO1 GS22-AC-BO1 Input Power Supply 1P+N+PE 3P+N+PE 3P+N+PE Rated Voltage 200~220V AC 380~400V AC 380~400V AC Rated Current 32A 16A 32A Output Output Voltage 200~220V AC 380~400V AC 380~400V AC Output Current 32A 16A 32A Rated Power 7KW 11KW 22KW Package Unit Size 340*285*147mm Package Size 570*350*310mm 570*350*310mm 570*350*310mm Net Weight 3.8KGS 4.5KGS 4.5KGS Gross Weight 6.5KGS 6.5KGS 6.5KGS Communication WIFI Optional 3G/4G/5G Optional OCPP OCPP 1.6 Json (OCPP 2.0 Optional) User Interface Charging Port Type 1/ Type 2 Cable Length 3.5M or customization length LED Indicator White/Green/Black/Blue/Orange/Purple/Customized Start Mode Plug&Play / RFID Card / APP Emergency Stop YES Environment Installation Wall-mounted Pole Mounted Work Temperature -25℃-+50℃ Work Humidity 5%-95% Work Altitude <2000M Our Company: Sichuan Tianfu Xiongzhou Intelligent Engineering Co., Ltd. was founded in 2016, locates in Chengdu. We dedicate in providing package technique and products solution for intelligent efficient and safe application of energy resources, and for energy saving and emission reduction. Through continuous technical innovation and marketing accumulation, We grown to be a professional supplier for EV charging facility and solutions. We are committed to the continuous improvement and update of the prod product hardware and software will continue to upgrade.Besides, If you have any other needs, please communicate with us ,we will try our best to help you. Current Adjustable Smart EV Charger 11kw 16A With LCD Screen 0 FAQ Q1. What is your terms of packing? A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. Q2: What's the MOQ? A: Most of our products are in stock,no MOQ.If you have customized requirements, please contact us. We will provide specific solutions for your requirements. Q3. What is your terms of delivery? A: FOB, CFR, CIF, DDU. Q4. How about your delivery time? A: Generally, it will take 3 to 25 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q5. Can you produce according to the samples? A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures. Q6. What is your sample policy? A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. Notes: • When using the charger to charge the electric vehicle, please carefully read the relevant tips and instructions of the vehicle. • Avoid falling of the charger from a high place or impact from strong mechanical force; otherwise, electrical safety of the device may be damaged, resulting in potential safety hazards. • It is strictly prohibited to use in the environment with combustible material or explosive gas, otherwise there is the risk of explosion. • Do not let conductive objects such as metal foreign matter fall into the charger, otherwise accidents may occur. • The PE end of the charger must be grounded reliably; otherwise, electric shock or fire may occur.

Grinding Steel Balls supply 1-6"forged grinding balls for gold mine,cooper mine Products introduction Forged steel ball is divided into carbon grinding steel ball, manganese grinding steel ball and special grinding steel ball. Forged steel ball is one of our advantage products. Diameter 20-70mm and 80-150mm steel ball are produced respectively by advanced automatic hot rolling and hot forging steel ball production line. Huafu grinding balls with uniform hardness in a high efficiency due to its advanced quenching technology. In advanced, these grinding balls feature high accurate dimensions, rounded geometry shape, high hardness and good mechanical properties, wear - resistance, no deformation, no breakage. Manganese steel grinding ball I Manganese steel grinding ball I is popular in Korea, Japan and North Korea, impact value is more than 12J/CM^2, manganese content is about 0.6-1.0%. This is the cheapest one in the manganese grinding balls. The performance as follow: Chemical Composition C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 0.48-0.56 0.17-0.37 0.6-1.0 ≤0.25 ≤0.25 ≤0.3 ≤0.035 ≤0.035 Size 20-150mm(0.8inch-6inch) Hardness Serious Hardness Standard Hardness 50-55HRC High Hardness 55-60HRC Impact Value ≥12J/CM^2 Balls Number ≥12000times Microstructure M+C(C-Carbide M-Martensite ) 1 inch - 6 inch Steel Forged Grinding Steel Balls For Gold Mine Cooper Mine 01 inch - 6 inch Steel Forged Grinding Steel Balls For Gold Mine Cooper Mine 1 Manganese steel grinding ball II Manganese steel grinding ball II with high hardness and corrosion resistance specialty. Mainly used in wet ball mill in mines and quartz sand factories.Has been exported to Pure, Mexico, Spain, India, Australia and South Africa. The specific performance as follow: Chemical Composition C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 0.57-0.65 0.17-0.37 0.7-1.0 ≤0.25 ≤0.25 ≤0.3 ≤0.035 ≤0.035 Size 20-150mm(0.8inch-6inch) Hardness Serious Hardness Standard Hardness 53-58HRC High Hardness 55-60HRC Impact Value ≥15J/CM^2 Balls Number ≥15000times Microstructure M+C(C-Carbide M-Martensite ) Manganese steel grinding ball III Manganese steel grinding ball III with high manganese content, impact value is more than 15J/CM^2, less wearing. Well exported all over the world. Performance as follow: Chemical Composition C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 0.62-0.70 0.17-0.37 0.9-1.0 ≤0.25 ≤0.25 ≤0.3 ≤0.035 ≤0.035 Size 20-150mm(0.8inch-6inch) Hardness Serious Hardness Standard Hardness 55-60HRC High Hardness 58-63HRC Impact Value ≥15J/CM^2 Balls Number ≥15000times Microstructure M+C(C-Carbide M-Martensite ) Special steel grinding ball I This grinding ball is widely used all over the world. High volume hardness and less wearing. Quality is well accepted by the customers. Please kindly check the following detailed performance. Chemical Composition C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 0.72-0.80 0.17-0.37 0.8-0.9 0.5-0.6 ≤0.25 ≤0.3 ≤0.035 ≤0.035 Size 20-150mm(0.8inch-6inch) Hardness Serious Hardness Standard Hardness 58-63HRC High Hardness 62-65HRC Impact Value ≥15J/CM^2 Balls Number ≥15000times Microstructure M+C(C-Carbide M-Martensite ) Special steel grinding ball II This grinding steel ball is one new type steel ball, good toughness and no breakage. It’s the new favorite in the users. Performance as follow: Chemical Composition C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 0.58-0.65 1.60-1.90 0.65-0.80 0.70-0.90 ≤0.25 ≤0.3 ≤0.035 ≤0.035 Size 20-150mm(0.8inch-6inch) Hardness Serious Hardness Standard Hardness 58-63HRC High Hardness 62-65HRC Impact Value ≥18J/CM^2 Balls Number ≥18000times Microstructure M+C(C-Carbide M-Martensite ) Other customized material Series/Element C(%) Si(%) Mn(%) Cr(%) Cu(%) Mo(%) P(%) S(%) 80# 0.77-0.85 0.17-0.37 0.50-0.80 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 40Mn 0.37-0.44 0.17-0.37 0.70-1.0 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 40Mn2 0.37-0.44 0.17-0.37 1.40-1.80 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 70Mn 0.65-0.75 0.17-0.37 0.90-1.20 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 70Mn2 0.65-0.75 0.20-0.45 1.4-1.8 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 40Cr 0.37-0.45 0.17-0.37 0.50-0.8 0.80-1.1 0-0.25 0-0.30 0-0.035 0-0.035 70Cr2 0.65-0.75 0.20-0.30 0.75-0.90 0.55-0.70 0-0.25 0-0.30 0-0.030 0-0.030 B1 0.52-0.65 0.17-0.37 0.60-1.2 0-0.25 0-0.25 0-0.30 0-0.035 0-0.035 B2B 0.58-0.65 0.17-0.37 0.90-1.0 0.60-0.65 0-0.25 0-0.30 0-0.035 0-0.035 B4 0.60-0.65 1.60-1.70 0.70-0.80 0.70-0.80 0-0.25 0-0.30 0-0.035 0-0.035 B-6 0.75-0.85 0.2-0.40 0.90-1.0 0.85-0.95 0-0.25 0.06-0.13 0-0.035 02-0.035 B-6A 0.82-0.95 0.20-0.40 0.92-1.02 0.80-0.95 0-0.25 0.06-0.10 0-0.035 0-0.035 B-7 0.35-0.40 0.17-0.37 0.70-0.80 0.90-1.0 0-0.25 0-0.30 0-0.035 0-0.035 BV 1-1.06 0.17-0.37 0.9-1.0 0.55-0.65 0-0.25 0-0.30 0-0.035 0-0.035 GCr15 0.95-1.05 0.15-0.35 0.20-0.40 1.30-1.65 0-0.25 0-0.10 0-0.027 0-0.20 16Mn 0.13-0.19 0.2-0.6 1.2-1.6 0-0.30 0-0.25 --- 0-0.03 0-0.03

Led Ul Certificate 844 Ip67-Explosion Drop Fitting As Ab 50 Ev35 Explosion Proof Light High Temperature light High Temperature HB Series Features: Venas High Temperature High Bay Light, which is applied to ambient high temperature working area where operation temperature may reach 158℉(70°C), such as steel plant, aluminum smelter, and other high-temperature, dust, corrosive gas environment. The HB Series high heat resistant lights combine optical performance energy efficiency and outstanding versatility to meet the requirements of high temperature lighting applications in high-temperature, dust, corrosive gas environment, delivering a wide range of light outputs. The enclosure body is made of aluminum with corrosion-resistant coating which protects against overheating damage. Specifications: Model HB-xxxW-D1YZDG HB-xxxW-D2YZDG HB-xxxW-D4YZDG Power 10-150W 100-300W 300-600W Voltage AC127-270V/AC347-480V,50/60Hz Efficiency 150Im/W CRI >70 Beam Angle 20°-120° CCT 2200k-7000k Amebient Temperature 40℉ to + 158℉(-40℃ to +70℃) IP Rating IP66/IP67 IK IK09 LED Chip 5050/3535/3030 Pccking Information Model Quantity/Carton Packing Size(mm) N.W(KG) G.W(KG) HB-xxxW-D1YZDG 1 340*340*550 8 9 HB-xxxW-D2YZDG 1 380*670*306 16 17 HB-xxxW-D4YZDG 1 696*675*306 32.25 33.25 IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 0 Dimension Unit:mm or inch HB-xxxWD1 IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 1 HB-xxxWD4 IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 2 Ordering Guide IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 3 Mounting Methods No.1 Hook Pendant Mounting IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 4 No.2 Bracket Mounting IP67 Explosion Proof LED Lights 150Im High Temperature 10-150W 5 FAQ Q1. Can I have a sample order ? Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. Do you have any MOQ limit for order? Low MOQ, 1pc for sample checking is available Q3. How do you ship the goods and how long does it take to arrive? We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q4. How to proceed an order ? Firstly, let us know your requirements or application. Secondly, We quote according to your requirements or our suggestions. Thirdly,customer confirms the samples and places deposit for formal order. Fourthly, We arrange the production.

Product Description 3 phase EV Chargers 160kw Electric Vehicle Fast Charging Pile CCS type 2/type 1 Charging Station160KW DC EV charger is used in public operations such as highway stops,gas stations, and airports. Private operations,such as electric car dealers,electric car fleets,etc. Compatible vehicles:BMW,Volkswagen,GM,Porsche,Audi,Nissan , ,Mitsubishi,Peugeot,Citrtoen,Kia, Renault,Daiml , er,Tesla,Smart,Mercedes DC EVcharger product features: 1. Support GBT,CCS, and CHAdeMO CHARGING output at the same time(optional) 2. Reliable and powerful modular hardware. 3. The installation is simple,fast and easy. 4. Daylight-readable touchscreen display. 5. Support open communication protocol OCPP. 6. RFID authorization 7. Low operating noise Power Suppply 3P+N+PE Rated Voltage 400VAC±15%(50/60Hz) THDi ≤5% Efficiency ≥95% Power Factor ≥0.98 Connector Type CCS Combo 2 Output Voltage 150-1000V Maximum Output Current 250A Output Power Rating 120kW(Max)/180kW(Max) Output Voltage Accuracy ≤0.5% Output Current Accuracy ≤±5% HMI 7-Inch touch screen Charging Method RFID Card Cable Length Cellular modem:GSM/4G (optional) LAN:10/100 Base-T Ethernet Communication Protocol OCPP 1.6J Operating Noise Level ≤60dBA Ingress Protection(IP/IK rating) IP54/IK08 Power Meter Accuracy Class 1 energy meter Enclosure Galvanized steel Product Dimension 700 x 550 x 1800mm(W x D x H) Package Dimension 950 x 720 x 1950mm(W x D x H) Protection Over Current,Under Voltage,Over Voltage,Short Circuit,Residual Current, Surge Protection,Over Temperature,Ground Protection Certification Standard EN/IEC 61851-1,EN/IEC 61851-23,EN/IEC 61851-24,EN/IEC62196-1,EN/IEC62196-3 Operating Temperature -35℃ to +50℃ Storage Temperature –40°C to +75°C Maximum Installation Height ≤2000m Operating Humidity 5%–95% RH Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 0 Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 1 Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 2 Ingress Protection IP54,IK10 You can use the item outdoor and do not have to worry even in rainy days. The shell is made of ABS, Light but robust, so it will note be easily damaged. You can add a lock at the bottom of the station to prevent lost. Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 3 Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 4 Fast 3 Phase Home Ev Charger Station Type 2 Type 1 Car Charging Pile 160kw CCS 5 what is the working voltage of the DC evcharger? The DC ev charger power inlet is a three-phase five-wire system:L1,L2,L3,N,PE what certification does DC EVcharger get? DC EV charger has obtained CE,TUV,SGS,ISO,&China National Laboratory Test Certification. Can the DC EV Charger function be customized? Yes, contact our engineers to develop and upgrade the software or hardware of the DC EV Charger to meet your needs.