Offers to Sell

performance: YR8701 is suitable for the cutting of magnesium alloys, including turning, drilling, boring, reaming and many other processing methods. The product has excellent lubricity, hard water cooling resistance and defoaming. Outstanding lubrication performance can ensure the surface finish of the machined surface .Excellent hard water resistance, ensuring the service life of magnesium alloy processing, thereby reducing comprehensive use costs. Brand Name: Allens Model: YR8701 Place of Origin: Langfang, Hebei Application: Magnesium alloy Deployment instructions: Recommended usage: light load processing: 5%, medium load processing: 5%-10%, heavy load processing: 10%-15%. Prepare directly with industrial tap water (in order to obtain the best performance, the recommended water hardness range is <150ppm). When preparing, first add tap water to the liquid tank, and then stir (or circulate) while adding the original solution to the specified concentration. After opening the cycle use. Applicable material: magnesium alloy Storage instructions: ● Store at room temperature, avoid mixing sundries and other oils ● Avoid direct sunlight and exposure ● Avoid contact with strong oxidants, strong acids and strong bases ● The appearance of the product becomes darker in long-term storage, which does not affect the use effect ● If frozen at low temperature, it can be used after freezing at 20℃ without affecting the use effect Purpose: Magnesium alloy cutting

PRE-TERMINATED MULTIFIBER CABLE Pre-terminated multifiber cable consist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MTRJ, E2000 Connector types. Our polishing craft and expertise ensure excellent optical performance. As a professional pre terminated cable manufacturer, T&S produces multifiber cable assemblies that are composed of top-quality ceramic ferrules and fiber connector housings. All of our multifiber cables are ensured with a stable performance at a high-quality level. FAQs of Pre-terminated Multifiber Cable What Is The Default Length Of Both Fanout Part (breakout Leg) And The Entire Length? Can It Be Customized? No default length is defined and you can customize the multifiber cable for sure. In most cases, the breakout leg is 0.5m according to our record. The longest breakout leg could be 3.0m or longer and it depends. Will A 50m Pre-terminated Cable Be Shipped With Being Pack On A Spool?  What's The Largest Fiber Count Of Pre-terminated Multi-fiber Cable T&s Can Offer? How Much Does It Cost To Terminate Fiber Optic Cable? T&S Communications is a professional fiber optic accessories suppliers, we provide pre terminated fiber optic cable, pre terminated fiber and etc. Want to know more? Please contact us.

PLC WAFER As an experienced plc splitter factory, T&S offers PLC splitter wafers as well. Based on Planar Lightwave Circuit technologies, PLC splitter wafers are produced on the quartz substrate through a series of processes including CVD deposition, photo-masking, etching, etc. PLC splitter wafers can be designed for 1x2, 1x4, 1x8, 1x16, 1x32, 1x64 and 2xN. Splitter chips with high yield, quality and reliability, are made of PLC wafers through dicing and polishing. Specifications of PLC Wafer Optical SpecificationsWafer Specifications Parameter Class Unit 1x2 1x4 1x8 1x16 1x32 1x64 Operating Wavelength - nm 1260-1650 Insertion Loss P dB 3.6 6.7 9.8 13.2 16.2 19.8 PDL P dB 0.15 0.15 0.2 0.25 0.25 0.3 Uniformity P dB 0.5 0.5 0.6 0.8 1.0 1.2 Return Loss - dB - ≥55 Directivity - dB - ≥55 Operating Temperature - ℃ - -40~+85 Storage Temperature - ℃ - -40~+85 TS Communication is a professional fiber optic accessories suppliers, we provide plc splitter 1x32, 1x16 plc splitter and etc. Want to know more? Please contact us.

QSFP+ 40G LR4 10KM The QSFP+ 40G-LR4-10km module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-side 40G interfaces. The 40G QSFP+ LR4 Lite transceiver is designed for applications based on the IEEE802.3ba 40GBASE-LR4 standard of up to 10km reach. Features of QSFP+ 40G LR4 10km Reach: 10 km via SMF Uncooled CWDM DFB lasers, directly modulated Using ITU G.694.2 wavelength grid at 1271, 1291, 1311, and 1331nm User controllable Transmit Input Equalization and Receiver Output Amplitude MSA-compliant performance monitoring via I2C interface Fiber connector: SMF LC duplex connector Compliant with QDR/DDR InfiniBand data rates Hot-pluggable electrical interface 0–70°C operating temp Power dissipation < 3.5W RoHS6 compliant (lead-free) Applications of QSFP+ 40G LR4 10km 40G Ethernet InfiniBand QDR and DDR interconnects Specifications of QSFP+ 40G LR4 10km Recommended Operating EnvironmentOptical Transmitter PerformanceOptical Receiver Performance Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted. Parameter Symbol Min Typical Max Unit Power Supply Voltage VCC 3.135 3.300 3.465 V Operating Case Temperature TC 0 25 70 °C Pin Descriptions of QSFP+ 40G LR4 10km Pin Definition of QSFP+ 40G LR4 10km Pin Symbol Name/Description 1 GND Ground 2 Tx2n Transmitter Inverted Data Input 3 Tx2p Transmitter Non-Inverted Data Input 4 GND Ground 5 Tx4n Transmitter Inverted Data Input 6 Tx4p Transmitter Non-Inverted Data Input 7 GND Ground 8 ModSelL Module Select 9 ResetL Module Reset 10 Vcc Rx +3.3 V Power supply receiver 11 SCL 2-wire serial interface clock 12 SDA 2-wire serial interface data 13 GND Ground 14 Rx3p Receiver Non-Inverted Data Output 15 Rx3n Receiver Inverted Data Output 16 GND Ground 17 Rx1p Receiver Non-Inverted Data Output 18 Rx1n Receiver Inverted Data Output 19 GND Ground 20 GND Ground 21 Rx2n Receiver Inverted Data Output 22 Rx2p Receiver Non-Inverted Data Output 23 GND Ground 24 Rx4n Receiver Inverted Data Output 25 Rx4p Receiver Non-Inverted Data Output 26 GND Ground 27 ModPrsL Module Present 28 IntL Interrupt 29 Vcc Tx +3.3 V Power supply transmitter 30 Vcc1 +3.3 V Power Supply 31 LPMode Low Power Mode 32 GND Ground 33 Tx3p Transmitter Non-Inverted Data Input 34 Tx3n Transmitter Inverted Data Input 35 GND Ground 36 Tx1p Transmitter Non-Inverted Data Input 37 Tx1n Transmitter Inverted Data Input 38 GND Ground Important Notice of QSFP+ 40G LR4 10km Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. T&S Communications is a professional fiber optic products supplier, we provide plc splitter 1x32, qsfp transceiver module, qsfp transceivers and etc. Want to know qsfp price or more? Please contact us.

The 5 ton sweeper adopts Dongfeng Dalika chassis, optional Chaochai 170 horsepower and Yuchai 165 horsepower engines, Wanliyang 6-speed gearbox, air- cut brake, 245/70R19.5 tubeless tires, single-row forward-turning cab, The wheelbase is 3800mm, with air conditioning, ABS. The 5 ton cleaning and sweeping truck is equipped with a Cummins 140 horsepower auxiliary engine, Italian motor, German high-pressure water pump, with front flush, side spray, middle spray, rear spray, flushing water gun, dustbin self- cleaning function, and 2 middle sweeping discs, and Car with the same width nozzle, universal high-pressure roadside cleaning nozzle, Veyron low-pressure pump, stainless steel 4-square trash can, 5-square water tank, stainless steel high-pressure pipeline, German controller, Korean control box, PLC one-key control, LED tail Arrow lights, engine oil, garbage bins, and water tanks are equipped with anti-overflow and low water level alarms, indoor monitors for reversing and cleaning, 18m high-pressure flushing reel, cleaning width 3.5m, cleaning pressure 10MPa, suction particle size φ110mm. 5 ton washing and sweeping truck dedicated function 1. The 5-ton washing and sweeping truck integrates washing, sweeping, watering and high-pressure cleaning functions. It adopts the arrangement of "two-plate brushes in the middle + wide suction nozzle (built-in high-pressure spray rod) + side spray rod in the middle". , It has different operation modes such as full suction sweeping, left sweeping sweeping, right sweeping sweeping, full sweeping, left sweeping, right sweeping; the electrical system adopts PLC program one-key automatic control, simple operation, and the controller is imported from Germany , Reliable performance. When operating, you only need to select the operating mode, and the startup and shutdown of each operating mechanism are automatically controlled by programs. 2. The 5-ton washing and sweeping truck is equipped with an advanced voice prompt alarm device, which can accurately broadcast various safety prompts and faults. The water tank is equipped with a low water level sensor alarm system, which automatically alarms when there is no water to prevent the water pump from being damaged; the garbage bin is equipped with an anti-overflow alarm device to prevent overflow from the suction pipe during sewage operations and cause secondary pollution. The whole vehicle has Reversing protection device, automatically retracts the working device when reversing. 3. The auxiliary engine of the 5-ton washing and sweeping vehicle is equipped with a vehicle clutch, starting and stopping, the cylinder drives the clutch, and is engaged after a delay, and the clutch is separated and engaged. It is automatically controlled by an electronic control system without manual operation, which effectively avoids the fan. The high-pressure water pump and the engine are damaged; the high-pressure water pump is imported from Germany. When the high-pressure water pump is started and the working water valve is switched, the water pump is automatically unloaded. The air circulation, safety valve and overflow valve are triple protected to prevent damage to the high- pressure water pump. 4. The cleaning device of the high-pressure sprayer of the 5-ton washing and sweeping truck will automatically clean the sewage tank after dumping the garbage, which greatly reduces the labor intensity of the operator. The tube can be used to clean the car body and other equipment and facilities. There is a high-definition monitoring probe on the right sweeping pan and the rear of the trash bin. A high-definition LCD monitor is installed in the cab. During operation, the sweeping operation status and the quality of the entire vehicle operation can be monitored. https://www.isuzujp.com/product-cate , gory/isuzu-road-washing-sweeper-truck/

Minimum Order: 1 bags

QSFP28 100G SR4 100M The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector. Features of 100G QSFP28 SR4 100m 4 channels full-duplex transceiver modules Transmission data rate up to 25Gbps per channel 4 channels 850nm VCSEL array 4 channels PIN photo detector array Hot-pluggable QSFP28 form factor Maximum link length of 70m on OM3 Multimode Fiber(MMF) and 100m on OM4 MMF Single 1X12 MPO connector receptacle Hot-pluggable electrical interface 0–70°C operating temp Low power consumption < 2.5W RoHS6 compliant (lead-free) Applications of QSFP28 100G SR4 100m 100GBASE-SR4 100G Ethernet Specifications of QSFP28 100G SR4 100m Recommended Operating EnvironmentOptical Transmitter PerformanceOptical Receiver Performance Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted. Parameter Symbol Min Typical Max Unit Power Supply Voltage VCC 3.135 3.300 3.465 V Operating Case Temperature TC 0 25 70 °C Pin Descriptions of QSFP28 100G SR4 100m Pin Definition of QSFP28 100G SR4 100m Pin Symbol Name/Description 1 GND Ground 2 Tx2n Transmitter Inverted Data Input 3 Tx2p Transmitter Non-Inverted Data Input 4 GND Ground 5 Tx4n Transmitter Inverted Data Input 6 Tx4p Transmitter Non-Inverted Data Input 7 GND Ground 8 ModSelL Module Select 9 ResetL Module Reset 10 Vcc Rx +3.3 V Power supply receiver 11 SCL 2-wire serial interface clock 12 SDA 2-wire serial interface data 13 GND Ground 14 Rx3p Receiver Non-Inverted Data Output 15 Rx3n Receiver Inverted Data Output 16 GND Ground 17 Rx1p Receiver Non-Inverted Data Output 18 Rx1n Receiver Inverted Data Output 19 GND Ground 20 GND Ground 21 Rx2n Receiver Inverted Data Output 22 Rx2p Receiver Non-Inverted Data Output 23 GND Ground 24 Rx4n Receiver Inverted Data Output 25 Rx4p Receiver Non-Inverted Data Output 26 GND Ground 27 ModPrsL Module Present 28 IntL Interrupt 29 Vcc Tx +3.3 V Power supply transmitter 30 Vcc1 +3.3 V Power Supply 31 LPMode Low Power Mode 32 GND Ground 33 Tx3p Transmitter Non-Inverted Data Input 34 Tx3n Transmitter Inverted Data Input 35 GND Ground 36 Tx1p Transmitter Non-Inverted Data Input 37 Tx1n Transmitter Inverted Data Input 38 GND Ground Important Notice of QSFP28 100G SR4 100m Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. T&S Communications is a professional fiber optic accessories suppliers, we provide plc splitter 1x32, qsfp28 sr4 and etc. Want to know more? Please contact us.

QSFP28 100G CWDM4 2K The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1.1. It is interoperable with CWDM4 transceivers over a 2 km reach. Features of QSFP28 100G CWDM4 2k Reach: 2 km via SMF Link budget assumes the use of KR4 FEC by the host Uncooled CWDM DFB lasers, directly modulated Electrical interface: retimed CAUI-4 per 100G Ethernet IEEE 802.3bm Annex 83E User controllable Transmit Input Equalization and Receiver Output Amplitude MSA-compliant performance monitoring via I2C interface Fiber connector: SMF LC duplex connector Hot-pluggable 0–70°C operating temp Power dissipation < 3.5W RoHS6 compliant (lead-free) Applications of QSFP28 100G CWDM4 2k 100G CWDM4 Ethernet InfiniBand 4x EDR Specifications of QSFP28 100G CWDM4 2k Optical Transmitter PerformanceOptical Receiver PerformanceRecommended Operating Environment Parameter Symbol Min Typical Max Unit Center Wavelength Ch0 λ0 1264.5 - 1277.5 nm Ch1 λ1 1284.5 - 1297.5 nm Ch2 λ2 1304.5 - 1317.5 nm Ch3 λ3 1324.5 1337.5 nm Bit Rate per Channel B 25.78125±100ppm Gb/s Side Mode Suppression Ratio SMSR 30 - - dB Average launch power, each lane - -6.5 - 2.5 dBm Optical Modulation Amplitude (each lane) OMA -4.0 - 2.5 dBm Launch power in OMA minus TDP, each lane OMA-TDP -5.0 - - dBm Transmission & dispersion penalty, each lane TDP - - 3.0 dB RIN20 OMA - - - -130 dB/Hz Transmitter Reflectance - - - -12 dB Extinction Ratio ER 3.5 - dB Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} {0.31, 0.4, 0.45, 0.34, 0.38, 0.4} CWDM4 MSA Technical Specifications Rev 1.1 Total average launch power - - - 8.5 dBm Average launch power of OFF transmitter, each lane - - - -30 dBm Optical return loss tolerance - - - 20 dB Pin Descriptions of QSFP28 100G CWDM4 2k Pin Symbol Name/Description 1 GND Ground 2 Tx2n Transmitter Inverted Data Input 3 Tx2p Transmitter Non-Inverted Data Input 4 GND Ground 5 Tx4n Transmitter Inverted Data Input 6 Tx4p Transmitter Non-Inverted Data Input 7 GND Ground 8 ModSelL Module Select 9 ResetL Module Reset 10 Vcc Rx +3.3 V Power supply receiver 11 SCL 2-wire serial interface clock 12 SDA 2-wire serial interface data 13 GND Ground 14 Rx3p Receiver Non-Inverted Data Output 15 Rx3n Receiver Inverted Data Output 16 GND Ground 17 Rx1p Receiver Non-Inverted Data Output 18 Rx1n Receiver Inverted Data Output 19 GND Ground 20 GND Ground 21 Rx2n Receiver Inverted Data Output 22 Rx2p Receiver Non-Inverted Data Output 23 GND Ground 24 Rx4n Receiver Inverted Data Output 25 Rx4p Receiver Non-Inverted Data Output 26 GND Ground 27 ModPrsL Module Present 28 IntL Interrupt 29 Vcc Tx +3.3 V Power supply transmitter 30 Vcc1 +3.3 V Power Supply 31 LPMode Low Power Mode 32 GND Ground 33 Tx3p Transmitter Non-Inverted Data Input 34 Tx3n Transmitter Inverted Data Input 35 GND Ground 36 Tx1p Transmitter Non-Inverted Data Input 37 Tx1n Transmitter Inverted Data Input 38 GND Ground Important Notice of QSFP28 100G CWDM4 2k Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. TS Communication is a professional fiber fiber optic products supplier, we provide qsfp28 100g，qsfp28 cwdm4, 100g qsfp28, qsfp 100g, qsfp28 and etc. Want to know qsfp28 price or more? Please contact us.

QSFP28 100G CWDM4 10KM The QSFP28 100G-CWDM4-10km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1.1 but alters some of the specifications to extend the link reach from 2 km to 10 km. It is interoperable with CWDM4 transceivers over a 2 km reach. Features of QSFP28 100G CWDM4 10km Reach: 10 km via SMF Optical link budget: Supports 6.5 dB of link budget Link budget assumes the use of KR4 FEC by the host Uncooled CWDM DFB lasers, directly modulated Electrical interface: retimed CAUI-4 per 100G Ethernet IEEE 802.3bm Annex 83E User controllable Transmit Input Equalization and Receiver Output Amplitud MSA-compliant performance monitoring via I2C interface Fiber connector: SMF LC duplex connector Hot-pluggable 0–70°C operating temp Power dissipation < 3.5W RoHS6 compliant (lead-free) Applications of QSFP28 100G CWDM4 10km 100G CWDM4 Ethernet InfiniBand 4x EDR Specifications of QSFP28 100G CWDM4 10km Optical Transmitter PerformanceOptical Receiver PerformanceRecommended Operating Environment Parameter Symbol Min Typical Max Unit Center Wavelength Ch0 λ0 1264.5 - 1277.5 nm Ch1 λ1 1284.5 - 1297.5 nm Ch2 λ2 1304.5 - 1317.5 nm Ch3 λ3 1324.5 - 1337.5 nm Bit Rate per Channel B 25.78125±100ppm Gb/s Side Mode Suppression Ratio SMSR 30 - - dB Average launch power, each lane - -6.5 - 2.5 dBm Optical Modulation Amplitude (each lane) OMA -4.0 - 2.5 dBm Launch power in OMA minus TDP, each lane OMA-TDP -5.0 - dBm Transmission & dispersion penalty, each lane TDP - - 3.0 dB RIN20 OMA - - - -130 dB/Hz Transmitter Reflectance - - - -20 dB Extinction Ratio ER 3.5 - dB Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} {0.31, 0.4, 0.45, 0.34, 0.38, 0.4} 100G 4WDM-10 MSA Technical Specifications Release 1.0 Average launch power of OFF transmitter, each lane - - - -30 dBm Optical return loss tolerance - - - 20 dB Pin Descriptions of QSFP28 100G CWDM4 10km Pin Definition of QSFP28 100G CWDM4 10km Pin Symbol Name/Description 1 GND Ground 2 Tx2n Transmitter Inverted Data Input 3 Tx2p Transmitter Non-Inverted Data Input 4 GND Ground 5 Tx4n Transmitter Inverted Data Input 6 Tx4p Transmitter Non-Inverted Data Input 7 GND Ground 8 ModSelL Module Select 9 ResetL Module Reset 10 Vcc Rx +3.3 V Power supply receiver 11 SCL 2-wire serial interface clock 12 SDA 2-wire serial interface data 13 GND Ground 14 Rx3p Receiver Non-Inverted Data Output 15 Rx3n Receiver Inverted Data Output 16 GND Ground 17 Rx1p Receiver Non-Inverted Data Output 18 Rx1n Receiver Inverted Data Output 19 GND Ground 20 GND Ground 21 Rx2n Receiver Inverted Data Output 22 Rx2p Receiver Non-Inverted Data Output 23 GND Ground 24 Rx4n Receiver Inverted Data Output 25 Rx4p Receiver Non-Inverted Data Output 26 GND Ground 27 ModPrsL Module Present 28 IntL Interrupt 29 Vcc Tx +3.3 V Power supply transmitter 30 Vcc1 +3.3 V Power Supply 31 LPMode Low Power Mode 32 GND Ground 33 Tx3p Transmitter Non-Inverted Data Input 34 Tx3n Transmitter Inverted Data Input 35 GND Ground 36 Tx1p Transmitter Non-Inverted Data Input 37 Tx1n Transmitter Inverted Data Input 38 GND Ground Important Notice of QSFP28 100G CWDM4 10km Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative. T&S Communications is a professional fiber optic products supplier, we provide plc splitter 1x32, 1x16 plc splitter, qsfp 100 and etc. Want to know more? Please contact us.

PLC SPLITTER As a professional plc splitter manufacturer, T & S Communication produces a planar optical waveguide chip on its own and manufactures PLC splitter with self-developed PLC aligning equipment for automatic coupling. T&S PLC splitter has a good consistency and stable quality. T&S has built 10000-class and 1000- class dust-free workshops, and there are 32 sets of automatic alignment systems. T&S plc splitter factory offers premium PLC splitters of various packaging types including bare fiber type, mini type, box type, cassette type, tray type and rack-mounted type PLC splitter are available. The current monthly production capacity is 200000 PCs (1x8). Features of PLC Splitter Broadband Operation Wavelength Low Insertion loss Low PDL Compact Design Good channel-to-channel uniformity High Reliability and Stability Pass Telcordia GR-1209-Core Reliability Test Pass Telcordia GR-1221-Core Reliability Test RoHS Compliance Applications of PLC Splitter Telecommunication sector PON System FTT CATV Video Transmission Specifications of PLC Splitter Item Unit Parameter Operating Wavelength (nm) 1260 ~ 1650 1×N PLC Splitter -- 1×2 1×4 1×8 1×16 1×32 1×64 1×128 Insertion Loss MAX(P/S) (dB) 3.8/4.0 7.0/7.4 10.5/10.7 13.6/13.9 16.6/16.9 21/21.5 24/24.5 Uniformity MAX(P/S) (dB) 0.6/0.6 0.6/0.7 0.8/1.0 0.9/1.2 1.2/1.4 1.7/1.9 2.2/2.5 Return Loss MIN (dB) 55 PDL MAX(P/S) (dB) 0.15/0.25 0.15/0.25 0.2/0.25 0.2/0.3 0.25/0.3 0.25/0.35 0.4/0.45 2×N PLC Splitter -- 2×2 2×4 2×8 2×16 2×32 2×64 -- Insertion Loss MAX(P/S) (dB) 4.0/4.3 7.4/7.6 10.7/11.0 14/14.5 17.5/18 21.4/21.9 -- Uniformity MAX(P/S) (dB) 0.9/1.1 1.0/1.2 1.0/1.2 1.2/1.5 1.5/1.8 2.0/2.3 -- Return Loss MIN (dB) 55 PDL MAX(P/S) (dB) 0.25/0.3 0.25/0.3 0.25/0.3 0.3/0.35 0.3/0.35 0.35/0.4 -- Fiber Type -- ITU-T G657A1 , G657A2 Temperature Stability(-40~85℃) MAX (dB) 0.5( Typical 0.3 ) Operating Temperature (℃) -40 ~ 85 Storage Temperature (℃) -40 ~ 85 T&S Communications is a professional fiber optic products supplier, we provide plc splitter 1x4, 1x8 plc splitter and etc. Want to know more? Please contact us.

PLC CHIP As a professional plc splitter manufacturer, T&S provides a wide range of different fiber optic components at reasonable prices. Based on Planar Lightwave Circuit technologies, our PLC splitter chips can uniformly divide and guide light in the wavelength ranges from 1260nm to 1650nm. With low insertion loss (IL), low Polarization Dependent Loss (PDL) and high reliability, T&S PLC chips have been widely used in FTTx and other optical communication systems. Features of PLC Chips Low PDL Low IL Wide operating wavelength: 1260-1650nm Compact size RoHS compliance Applications of PLC Chips Among all plc splitter manufacturers, T&S chip PLC can be applied in Optical communication networks, Telecom equipment, Three-Network-Integration systems, including Signal/power distribution, Fiber-To-The-Home (FTTH), Passive Optical Network (PON). Specifications of PLC Chip Parameter Class Unit 1x2 1x4 1x8 1x16 1x32 1x64 Operating Wavelength - nm 1260 -1650 Insertion Loss P dB 3.6 6.7 9.8 13.2 16.2 19.8 PDL P dB 0.15 0.15 0.2 0.25 0.25 0.3 Uniformity P dB 0.5 0.5 0.6 0.8 1.0 1.2 Return Loss - dB - ≥55 Directivity - dB - ≥55 Operating Temperature - ℃ - -40~+85 Storage Temperature - ℃ - -40~+85 The Core Components of PLC Chips T&S Communications is a professional optic accessories suppliers, we provide plc splitter 1x32, 1x16 plc splitter and etc. Want to know more? Please contact us.

With more than 15 years experience on development and manufacturing of fully automated coffee machine, Colet knows the different requirements on coffee taste between different countries and regions, and the different requirements on automatic coffee machine technology and design between different usage scenarios. Based on this, Colet developed fully automatic coffee machines series with rich functional configurations, and our partners can choose these functional configurations freely for their required coffee machines, which including espresso, milk foam, hot water, cold water, and chocolate on professional automatic coffee machines. Professional automatic coffee machines are powerful super-automatic coffee machines designed for high volume use, with massive programmability and customizable options apart from standard home use automatic coffee machines. Colet is a professional commercial coffee and hot chocolate machine manufacturer, Colet professional automatic coffee machines for sale are designed in commercial coffee machine standard, allow untrained staff to make barista-quality coffee from roasted coffee beans, fresh milk, and chocolate or milk powder with just one touch of a function button on the touch screen. Besides rich setting and maintenance functions, the powerful software allows users to create or delete any drinks mix from espresso, hot milk, milk foam, chocolate, hot water, and cool water, it supports 1 to 32 beverages that exist on the screen according to the user's requirement. This coffee and hot chocolate vending machine can provide different kinds of drinks such as hot chocolate, latte, espresso, americano, cappuccino, etc. As a real professional and commercial use bean-to-cup coffee machine that can make hot chocolate, Colet also provided barista mode for professional baristas, the espresso brewing pressure can be adjusted from time to time to make espresso with perfect and favorite taste. In addition, Colet professional automatic coffee machines also equipped with a professional steam wand with a temperature sensor and auto shut-off function. Colet professional automatic coffee machines are not only ideal as an office self service bean to cup coffee machine hot chocolate, or in retail outlets such as car showrooms, hair salons, but also in commercial business like hotels, bakeries, cafe bar, and convenience stores. FAQs of Personal Coffee and Chocolate Maker Q What should I look for when buying a coffee maker? A When buying a coffee maker, you should not only consider the cost of the machine but also the maintenance cost in the future. A good coffee maker machine should own great quality that would not need frequent maintenance. Also, you should consider whether it is easy to operate and the time it takes. Q Do some coffee makers make better coffee? A Even if some coffee makers seem to have the same procedure of making coffee, the quality of the coffee made would be very different. Since the temperature of the water, the grinding measure, and other factors would cause the coffee beans to show different flavors. So a good automatic coffee and hot chocolate machines should give the coffee beans the full play and use the best method to turn the beans to a wonderful cup of coffee. Colet is a reliable and professional coffee and hot chocolate maker manufacturer and supplier, we offer various types of professional coffee machines for sale that would meet your needs. Contact us know and check the price! Q How do I make the perfect cup of coffee in a coffee maker? A The water used to make coffee is of great importance, choose the water you like, and you will be surprised that your coffee tasted so good. Also, the amount of coffee beans is also significate, a moderate amount of coffee beans would previde the best taste and would not waste the beans. Water temperature is also important, so you should choose a good coffee maker machine that would not spoil the flavor of good beans.

Minimum Order: 1 bags

With more than 15 years experience on development and manufacturing of fully automated coffee machine, Colet knows the different requirements on coffee taste between different countries and regions, and the different requirements on automatic coffee machine technology and design between different usage scenarios. Based on this, Colet developed fully automatic coffee machines series with rich functional configurations, and our partners can choose these functional configurations freely for their required coffee machines, which including espresso, milk foam, hot water, cold water, and chocolate on professional automatic coffee machines. Colet has rich bean-to-cup automatic coffee machine models for home or small office use, which covers a high-level one-touch cappuccino coffee machine, and an original automatic espresso machine at a lower price. Colet factory manufactures 5 models of one touch cappuccino machine, fit with buyers with a different budget on the purchase of automatic cappuccino machines. They are designed with a touch screen, double boiler system, and automatic cappuccino system which is easy to be taken away from the coffee machine and flush by water directly. The model S7-2 with full stainless steel housing with a unique cappuccino system is the highest level product for higher budgets. In order to meet with more home baristas who have a limited budget for the full auto coffee machine or self service bean to cup coffee machines, Colet also designed 3 models as low price bean to cup coffee machine with automatic milk frother like supermarket, Amazon sales. They are fully automatic coffee machines with cheap prices, enable more fully automatic bean to cup coffee machine, and with full bean to cup and milk foam functions, high-quality components on the other hand. Colet also provided an additional optional steam wand as a milk frother for Q007Rs, in order to meet bean to cup coffee fans who also have demand on cappuccino and latte. FAQs Of Home Fully Automatic Coffee Machines Q Is the milk frother manually or automatically in automatic americano machine and bean to cup espresso machines? A In automatic americano machine and bean to cup espresso machines, the cappuccinatore is steam wand for manually make milk foam. Q What's the advantage of automatic cappuccino machine compared with automatic americano machine and bean to cup espresso machines? A Automatic cappuccino machine has double boiler and automatic milk frother system compared with single boiler americano and espresso machines. One boiler for espresso, and another one for milk frother separately, can make milk foam right after the espresso or opposite without wait, work with the automatic milk frother system, automatic cappuccino machine can make cappuccino or latte easily by just one touch of the function icon on dispaly. Q Can the Automatic Cappuccino Machine make Americano? A Yes, the automatic cappuccino machine equipped with solenoid valve for hot water function, can do one touch americano function(espresso + hot water). Q What's the sales channel for bean to cup automatic espresso machine, is it fit to my business? A The bean to cup auto espresso coffee machine has very competitive price, the design and low price is suitable for big quantity promotion sales like supermarket, Amazon, Ebay and so on, the end consumers are mainly home or small office.

Minimum Order: 1 bags

With more than 15 years experience on development and manufacturing of fully automated coffee machine, Colet knows the different requirements on coffee taste between different countries and regions, and the different requirements on automatic coffee machine technology and design between different usage scenarios. Based on this, Colet developed fully automatic coffee machines series with rich functional configurations, and our partners can choose these functional configurations freely for their required coffee machines, which including espresso, milk foam, hot water, cold water, and chocolate on professional automatic coffee machines. Commercial Touch Screen Automatic Espresso&Americano Coffee Machine combined the full touch screen control system from Colet commercial one-touch cappuccino coffee maker machines, and the special customized functions from Colet commercial fully automatic coffee machine touch screen, fit with the markets which prefer simple black coffee and Americano, and more modern coffee lovers who avoid drinking too much milk coffee with the consideration of the health problem, and also meet the requirement on high-level full touch screen self service bean to cup coffee machines. In recent two years, the sales of Colet automatic espresso&americano commercial coffee machine touch screen is increasing hardly in South Korea, United States, and Japan markets, which share almost 90% of sales of Colet commercial automatic espresso&americano coffee machines. Commercial Touch Screen Office Coffee Machine fits with most office, convenience store, restaurants, with the demand to supply up to 80cups of coffee or cappuccino every day. In addition, if users also have the demand to supply milk coffee beverages like cappuccino or latte sometimes, or hot chocolate drinks, it will be a good choice to purchase a commercial automatic milk steamer to use together with commercial touch screen automatic espresso&americano coffee machines. Colet offers various commercial auto coffee machines for sale, you can buy a high-quality automatic americano maker machine with a grinder at an attractive price here. Contact us now to know more information. Difference between Commercial Touch Screen Automatic Espresso&Americano Coffee Machine and Commercial Push-button Automatic Espresso&Americano Coffee Machine Commercial Touch Screen Automatic Espresso&Americano Coffee Machine Control: Full Color touch screen operation system Price: With higher price because of higher cost for color touch screen Customized function extentions: Up to 8 coffee functions for main function touch screen interface Commercial Push-button Automatic Espresso&Americano Coffee Machine Push buttons with LCD screen shows coffee machine working status and for setting menu With lower price 4 coffee function only based on 4 push buttons

Minimum Order: 1 bags

As a professional automatic coffee machine manufacturer since 2005, Colet developed full range of fully automatic self service bean to cup coffee machines, which includes home fully automatic coffee machines, commercial fully automated coffee machines, professional automatic coffee maker and automatic coffee vending machines with grinder, provide a complete coffee supply solution for home, commercial, professional and vending coffee supply requirements. CLT-Q006 is the first model One Touch latte Coffee Machine developed and manufactured by Colet factory, it is developed based on Colet's 2nd generation automatic coffee machine system in 2013. CLT-Q006 super-automatic coffee machine brews espresso, lungos, cappuccino, latte, hot milk at one touch of the function icons on the screen, and users no need to move their cup till the one touch latte machine automatically finish a beautiful and silky cappuccino or latte. Its touch screen programming menu is easy to navigate, you can select your preferred temperature, coffee strength, milk ratio against espresso, auto power-off and so on easily. CLT-Q006 is also as easy to maintain as it is to use, with its intuitive maintenance alerts, automated descaling cycle, removable brewing group which can be slid out of place and washed by hand, everyone can operate and maintain a fully automatic coffee machine easily. Parameter of CLT-Q006 One Touch Cappuccino Coffee Machine Item No. CLT-Q006 Description One Touch Cappuccino Coffee Machine Voltage 220~240V / 110~127V Approval CB,CE,GS,EMC,KC,SAA,CB,Rohs Frequency 50/60HZ Color Black, Silver Power 1200-1500W Packing 1pc/ctn Water-tank Capacity 2L or extendable water supply system Product size 455*270*355 mm Bean-tank Capacity 300g or extendable big bean container Packing size 560*340*440 mm Waste Drawer 10pcs or extendable big waste container N.W/G.W 11.3 / 13.5 kgs Pump Pressure 19 Bar ( Italy ULKA Pump) 20GP 330 pcs Brew Pressure 7~9 Bar 40GP 660 pcs Cable Length 1.2m or 1.5m 40HQ 790 pcs Features and Performance of CLT-Q006 One Touch Cappuccino Coffee Machine Super automatic coffee machine with one touch espresso, espresso lungo(or americano), cappuccino, latte, frothed milk, hot water function; New generation milk system which is disassembled from coffee machine, users can clean the inside milk scale and assemble back easily; The brewing heart is Italy brand ULKA pump with 19bar pump pressure as maximum, meet with requirement of high quality espresso extraction; Removable brewing group, water container, drip tray, waste coffee cake container and milk system for cleaning and maintenance easily; Adjustable coffee powder volume, powder coarseness, brew temperature to meet with various coffee tastes, and adjustable languages, energy saving time and water hardness to meet with different countries; 2L water container and waste coffee cake container with 10-15pcs capacity, to meet with more frequency coffee supply requirement, also extendable to a big waste container, big coffee bean container and water supply system to fit with commercial coffee use occasions. Advantages of CLT-Q006 One Touch Cappuccino Coffee Machine 6 pre-programmed beverages including espresso, espresso lungo(or americano), cappuccino, latte macchiato, frothed milk, hot water for tea. CLT-Q006 features a full-color touch screen display to easily navigate 6 pre- programmed drink options and customizable settings. The cappuccino system produces beautifully layered cappuccino, latte macchiato. If you want to try to be a barista, this coffee machine can produce dense frother milk with quality to meet Latte Art requirement.

Minimum Order: 1 bags